Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].
Date: 2019-10-20 13:33:43
From: Romain
Description: PowerMac G5 Quad (powermac11,2), single-cpu boot
[ 1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
[ 1.0000000] 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
[ 1.0000000] 2018, 2019 The NetBSD Foundation, Inc. All rights reserved.
[ 1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
[ 1.0000000] The Regents of the University of California. All rights reserved.
[ 1.0000000] NetBSD 9.99.17 (POWERMAC_G5_11_2.SP) #0: Sun Oct 20 09:09:15 UTC 2019
[ 1.0000000] dolbeau@powermacg5:/home/dolbeau/current/src/sys/arch/macppc/compile/obj/POWERMAC_G5_11_2.SP
[ 1.0000000] total memory = 2048 MB
[ 1.0000000] oea_startup: failed to allocate DEAD ZONE: error=12
[ 1.0000000] avail memory = 1962 MB
[ 1.0000000] pool redzone disabled for 'buf64k'
[ 1.0000000] timecounter: Timecounters tick every 10.000 msec
[ 1.0000000] found U3/U4 HT PIC at f8040000
[ 1.0000000] OpenPIC Version 1.2: Supports 4 CPUs and 124 interrupt sources.
[ 1.0000000] bootpath: /ht/pci@9/k2-sata-root/k2-sata@0/disk@0:3,netbsd.112SP
[ 1.0000000] mainbus0 (root)
[ 1.0000000] cpu0 at mainbus0: 970MP (Revision 1.1), ID 0 (primary)
[ 1.0000000] cpu0: HID0 0x513081<NAP,DPM,NHR,TBCTRL,EXTBEN,ENATTN> 0x80000000<EMCP>, powersave: 1
[ 1.0000000] cpu1 at mainbus0: ID 1
[ 1.0000000] cpu1: processor off-line; multiprocessor support not present in kernel
[ 1.0000000] memory0 at mainbus0: len=1024
[ 1.0000000] spdmem0 at memory0
[ 1.0000000] spdmem0: DDR2 SDRAM, no parity or ECC, 2GB, 800MHz (PC2-6400)
[ 1.0000000] spdmem0: 14 rows, 10 cols, 2 ranks, 8 banks/chip, 2.50ns cycle time
[ 1.0000000] spdmem0: tAA-tRCD-tRP-tRAS: 6-6-6-18
[ 1.0000000] spdmem0: voltage SSTL 1.8V, refresh time 7.8us (self-refreshing)
[ 1.0000000] spdmem1 at memory0
[ 1.0000000] spdmem1: DDR2 SDRAM, no parity or ECC, 2GB, 667MHz (PC2-5300)
[ 1.0000000] spdmem1: 14 rows, 10 cols, 2 ranks, 8 banks/chip, 3.00ns cycle time
[ 1.0000000] spdmem1: tAA-tRCD-tRP-tRAS: 5-5-5-15
[ 1.0000000] spdmem1: voltage SSTL 1.8V, refresh time 7.8us (self-refreshing)
[ 1.0000000] spdmem2 at memory0
[ 1.0000000] spdmem2: DDR2 SDRAM, no parity or ECC, 2GB, 800MHz (PC2-6400)
[ 1.0000000] spdmem2: 14 rows, 10 cols, 2 ranks, 8 banks/chip, 2.50ns cycle time
[ 1.0000000] spdmem2: tAA-tRCD-tRP-tRAS: 6-6-6-18
[ 1.0000000] spdmem2: voltage SSTL 1.8V, refresh time 7.8us (self-refreshing)
[ 1.0000000] spdmem3 at memory0
[ 1.0000000] spdmem3: DDR2 SDRAM, no parity or ECC, 2GB, 800MHz (PC2-6400)
[ 1.0000000] spdmem3: 14 rows, 10 cols, 2 ranks, 8 banks/chip, 2.50ns cycle time
[ 1.0000000] spdmem3: tAA-tRCD-tRP-tRAS: 6-6-6-18
[ 1.0000000] spdmem3: voltage SSTL 1.8V, refresh time 7.8us (self-refreshing)
[ 1.0000000] uni_n0 at mainbus0 address 0xf8000000
[ 1.0000000] ki2c0 at uni_n0 address 0xf8001000
[ 1.0000000] iic0 at ki2c0: I2C bus
[ 1.0000000] lmtemp0 at iic0 addr 0xca: temp-monitor LM75 Temperature Sensor
[ 1.0000000] dstemp0 at iic0 addr 0xcb: DS1361
[ 1.0000000] admtemp0 at iic0 addr 0xcc: MAX6690 temperature sensor: id. 0x4d, rev. 0x09
[ 1.0000000] admtemp1 at iic0 addr 0xce: MAX6690 temperature sensor: id. 0x4d, rev. 0x09
[ 1.0000000] dart at uni_n0 address 0xf8033000 not configured
[ 1.0000000] mpic at uni_n0 address 0xf8040000 not configured
[ 1.0000000] uninorth0 at mainbus0
[ 1.0000000] pci0 at uninorth0 bus 10
[ 1.0000000] pci0: i/o space, memory space enabled
[ 1.0000000] genfb0 at pci0 dev 0 function 0: vendor 10de product 0141 (rev. 0xa2)
[ 1.0000000] genfb0: framebuffer at 0x90020000, size 1280x1024, depth 8, stride 1536
[ 1.0000000] no data for est. mode 640x480x67
[ 1.0000000] wsdisplay0 at genfb0 kbdmux 1: console (default, vt100 emulation)
[ 1.0000000] wsmux1: connecting to wsdisplay0
[ 1.0000000] drm at genfb0 not configured
[ 1.0000000] ibmcpc0 at mainbus0
[ 1.0000000] Mapping in config space @ pa 0xf2000000, size: 0x02800000
[ 1.0000000] pci1 at ibmcpc0 bus 4
[ 1.0000000] pci1: i/o space, memory space enabled
[ 1.0000000] pci2 at ibmcpc0 bus 5
[ 1.0000000] pci2: i/o space, memory space enabled
[ 1.0000000] bge0 at pci2 dev 4 function 0: Broadcom BCM5780 Gigabit Ethernet
[ 1.0000000] genppc_pci_intr_map: pin: 1, line: 66
[ 1.0000000] bge0: interrupting at irq 66
[ 1.0000000] bge0: NVRAM lock timedout!
[ 1.0000000] bge0: HW config 00000015, 00000015, 00000000, 00000000 00000000
[ 1.0000000] bge0: ASIC BCM5714 B3 (0x8003), Ethernet address [_MAC_XXXXXXXXXX]
[ 1.0000000] bge0: setting short Tx thresholds
[ 1.0000000] brgphy0 at bge0 phy 1: BCM5780 1000BASE-T/X media interface, rev. 0
[ 1.0000000] brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
[ 1.0000000] bge1 at pci2 dev 4 function 1: Broadcom BCM5780 Gigabit Ethernet
[ 1.0000000] genppc_pci_intr_map: pin: 2, line: 67
[ 1.0000000] bge1: interrupting at irq 67
[ 1.0000000] bge1: NVRAM lock timedout!
[ 1.0000000] bge1: HW config 00000014, 00000014, 00000000, 00000000 00000000
[ 1.0000000] bge1: ASIC BCM5714 B3 (0x8003), Ethernet address [_MAC_XXXXXXXXXX]
[ 1.0000000] bge1: setting short Tx thresholds
[ 1.0000000] brgphy1 at bge1 phy 1: BCM5780 1000BASE-T/X media interface, rev. 0
[ 1.0000000] brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
[ 1.0000000] pci3 at ibmcpc0 bus 6
[ 1.0000000] pci3: i/o space, memory space enabled
[ 1.0000000] pci4 at ibmcpc0 bus 7
[ 1.0000000] pci4: i/o space, memory space enabled
[ 1.0000000] pci5 at ibmcpc0 bus 8
[ 1.0000000] pci5: i/o space, memory space enabled
[ 1.0000000] pci6 at ibmcpc0 bus 9
[ 1.0000000] pci6: i/o space, memory space enabled
[ 1.0000000] pci7 at ibmcpc0 bus 2
[ 1.0000000] pci7: i/o space, memory space enabled
[ 1.0000000] vendor 106b product 0051 (ethernet network) at pci7 dev 15 function 0 not configured
[ 1.0000000] pci8 at ibmcpc0 bus 1
[ 1.0000000] pci8: i/o space, memory space enabled
[ 1.0000000] obio0 at pci8 dev 7 function 0: addr 0x80000000
[ 1.0000000] zsc0 at obio0 irq 23,24
[ 1.0000000] zstty0 at zsc0 channel 0
[ 1.0000000] zstty1 at zsc0 channel 1
[ 1.0000000] ki2c1 at obio0
[ 1.0000000] iic1 at ki2c1: I2C bus
[ 1.0000000] deq0 at iic1 addr 0x46 Audio Codec (pcm3052)
[ 1.0000000] deq1 at iic1 addr 0x12 Audio Codec (cs8416)
[ 1.0000000] i2s at obio0 offset 0x0 not configured
[ 1.0000000] ohci0 at pci8 dev 11 function 0: vendor 1033 product 0035 (rev. 0x43)
[ 1.0000000] csr: 02100002
[ 1.0000000] genppc_pci_intr_map: pin: 1, line: 70
[ 1.0000000] ohci0: interrupting at irq 70
[ 1.0000000] ohci0: OHCI version 1.0
[ 1.0000000] usb0 at ohci0: USB revision 1.0
[ 1.0000000] ohci1 at pci8 dev 11 function 1: vendor 1033 product 0035 (rev. 0x43)
[ 1.0000000] csr: 02100002
[ 1.0000000] genppc_pci_intr_map: pin: 2, line: 70
[ 1.0000000] ohci1: interrupting at irq 70
[ 1.0000000] ohci1: OHCI version 1.0
[ 1.0000000] usb1 at ohci1: USB revision 1.0
[ 1.0000000] ehci0 at pci8 dev 11 function 2: vendor 1033 product 00e0 (rev. 0x04)
[ 1.0000000] genppc_pci_intr_map: pin: 3, line: 70
[ 1.0000000] ehci0: interrupting at irq 70
[ 1.0000000] ehci0: EHCI version 1.0
[ 1.0000000] ehci0: 2 companion controllers, 3 ports each: ohci0 ohci1
[ 1.0000000] usb at ehci0 not configured
[ 1.0000000] pci9 at ibmcpc0 bus 3
[ 1.0000000] pci9: i/o space, memory space enabled
[ 1.0000000] svwsata0 at pci9 dev 12 function 0: ServerWorks K2 SATA Controller (rev. 0x00)
[ 1.0000000] svwsata0: bus-master DMA support present
[ 1.0000000] genppc_pci_intr_map: pin: 1, line: 10
[ 1.0000000] svwsata0: using irq 10 for native-PCI interrupt
[ 1.0000000] svwsata0: primary channel wired to native-PCI mode
[ 1.0000000] atabus0 at svwsata0 channel 0
[ 1.0000000] svwsata0: secondary channel wired to native-PCI mode
[ 1.0000000] atabus1 at svwsata0 channel 1
[ 1.0000000] svwsata0: secondary channel wired to compatibility mode
[ 1.0000000] atabus2 at svwsata0 channel 2
[ 1.0000000] svwsata0: secondary channel configured to compatibility mode
[ 1.0000000] atabus3 at svwsata0 channel 3
[ 1.0000000] wdc0 at pci9 dev 13 function 0genppc_pci_intr_map: pin: 1, line: 38
[ 1.0000000] : interrupting at irq 38
[ 1.0000000] atabus4 at wdc0 channel 0
[ 1.0000000] vendor 106b product 0052 (IEEE1394 serial bus, OpenHCI) at pci9 dev 14 function 0 not configured
[ 1.0000000] smu0 at mainbus0 mbox 0x860c gpio 0x62 irq 53smuiic0 at smu0
[ 1.0000000] iic2 at smuiic0: I2C bus
[ 1.0000000] smusat0 at iic2 addr 0x58
[ 1.0000000] smusat1 at iic2 addr 0x59
[ 1.0000000] system-clock at iic2 addr 0x6a not configured
[ 1.0000000] smuiic1 at smu0
[ 1.0000000] iic3 at smuiic1: I2C bus
[ 1.0000000] using 5 fans for CPU zone
[ 1.0000000] using 1 fans for drive bay zone
[ 1.0000000] using 2 fans for expansion slots zone
[ 1.0000000] vmmask 7f800000 schedmask 7f800000 highmask 7f800000
[ 1.0000000] timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
[ 1.0000030] timecounter: Timecounter "mftb" frequency 33333333 Hz quality 100
[ 1.0600105] uhub0 at usb0: NetBSD (0000) OHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
[ 1.0600105] uhub0: 3 ports with 3 removable, self powered
[ 1.0600105] uhub1 at usb1: NetBSD (0000) OHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
[ 1.0600105] uhub1: 2 ports with 2 removable, self powered
[ 1.1899988] svwsata0 port 0: device present, speed: 1.5Gb/s
[ 1.1899988] svwsata0 port 1: device present, speed: 1.5Gb/s
[ 1.2899988] wd0 at atabus0 drive 0
[ 1.3200195] wd0: <MAXTOR STM3250310AS>
[ 1.3200195] wd0: drive supports 16-sector PIO transfers, LBA48 addressing
[ 1.3200195] wd0: 232 GB, 484521 cyl, 16 head, 63 sec, 512 bytes/sect x 488397168 sectors
[ 1.3900101] wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133), NCQ (32 tags)
[ 1.3900101] wd0(svwsata0:0:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
[ 1.3900101] wd1 at atabus1 drive 0
[ 1.3900101] wd1: <MAXTOR STM3250310AS>
[ 1.3900101] wd1: drive supports 16-sector PIO transfers, LBA48 addressing
[ 1.3900101] wd1: 232 GB, 484521 cyl, 16 head, 63 sec, 512 bytes/sect x 488397168 sectors
[ 1.4900124] wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133), NCQ (32 tags)
[ 1.4900124] wd1(svwsata0:1:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
[ 2.4199988] atapibus0 at atabus4: 2 targets
[ 2.4600024] cd0 at atapibus0 drive 0: <HL-DT-ST DVD-RW GWA-4165B, 884A39D7F5AF, C006> cdrom removable
[ 2.5000048] cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66)
[ 2.5000048] cd0(wdc0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66) (using DMA)
[ 2.5000048] WARNING: 12 errors while detecting hardware; check system log.
[ 2.5000048] boot device: wd0
[ 2.5700138] root on wd0a dumps on wd0b
[ 2.6100208] mountroot: trying ffs...
[ 2.6599988] root file system type: ffs
[ 2.6900030] kern.module.path=/stand/macppc/9.99.17/modules
[ 2.7899989] init: copying out path `/sbin/init' 11
[ 8.5799974] bge0: link state UP (was UNKNOWN)
[ 8.5799974] bge1: link state DOWN (was UNKNOWN)
[ 8.8300045] bge0: link state DOWN (was UP)
[ 11.9600190] bge0: link state UP (was DOWN)