Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2019-11-07 09:22:50
From: yamori813
Description: Softbank_E-WMTA22 USB work
Starting kernel ...
initarm: console initialized
arg1 kmdp = 0xc033e0f8
boothowto = 0x00000000
dtbp = 0xc02e1638
lastaddr1: 0x8036c000
loader passed (static) kenv:
no env, null ptr
---<<BOOT>>---
ARM Debug Architecture v6
2 watchpoints and 6 breakpoints supported
KDB: debugger backends: ddb
KDB: current backend: ddb
CPU(0) applied BP hardening: not necessary
Copyright (c) 1992-2019 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 13.0-CURRENT #28 3ed01079d71-c264169(zrouter)-dirty: Thu Nov 7 17:59:22 JST 2019
hiroki@zrouter:/usr/home/hiroki/zobj/usr/home/hiroki/ZRouter/tmp/usr/home/hiroki/freebsd/arm.armv6/sys/Softbank_E-WMTA22 arm
FreeBSD clang version 9.0.0 (tags/RELEASE_900/final 372316) (based on LLVM 9.0.0)
Preloaded elf kernel "kernel" at 0xc033e0f8.
CPU: ARM ARM1136 r1p5 (ECO: 0x00000000)
CPU Features:
Thumb, VMSAv7
Optional instructions:
UMULL, SMULL, MLA, SIMD(ext)
64KB/32B 4-way instruction cache
64KB/32B 4-way WB data cache
real memory = 134217728 (128 MB)
avail memory = 126042112 (120 MB)
Physical memory chunk(s):
0x80000000 - 0x87ffffff, 128 MB ( 32768 pages)
Excluded memory regions:
0x80000000 - 0x8043cfff, 4 MB ( 1085 pages) NoAlloc
Avail lists:
phys_avail[0] 0x8043d000
phys_avail[1] 0x87d53000
dump_avail[0] 0x80000000
dump_avail[1] 0x88000000
Static device mappings:
0x07000000 - 0x07ffffff mapped at VA 0xfef00000
0x10000000 - 0x10ffffff mapped at VA 0xfdf00000
0x20000000 - 0x20ffffff mapped at VA 0xfcf00000
arc4random: WARNING: initial seeding bypassed the cryptographic random device because it was not yet seeded and the knob 'bypass_before_seeding' was enabled.
ULE: setup cpu 0
random: entropy device external interface
mem: <memory>
null: <full device, null device, zero device>
openfirm: <Open Firmware control device>
ofwbus0: <Open Firmware Device Tree>
simplebus0: <Flattened device tree simple bus> on ofwbus0
simplebus1: <Flattened device tree simple bus> on ofwbus0
pic0: <Comcerto Interrupt Controller> mem 0xa0000-0xaffff on simplebus1
intr_pic_register(): PIC 0xc0d5bf40 registered for pic0 <dev 0xc0b4ec80, xref 1>
intr_pic_claim_root(): irq root set to pic0
timer0: <Comcerto Timer> mem 0x50000-0x5ffff irq 3,4,5,6,7,8 on simplebus1
intr_setup_irq(): irq 31 add handler error 0 on timer0
Event timer "Comcerto Timer0" frequency 125000000 Hz quality 1000
Timecounter "Comcerto Timer1" frequency 125000000 Hz quality 1000
cpulist0: <Open Firmware CPU Group> on ofwbus0
cpu0: <Open Firmware CPU> on cpulist0
cpu0: Nominal frequency 650Mhz
cpu1: <Open Firmware CPU> on cpulist0
cpu1: Nominal frequency 650Mhz
simplebus1: <mac0@d0000> mem 0xd0000-0xdffff irq 1 compat comcerto,ethernet (no driver attached)
simplebus1: <mac1@190000> mem 0x190000-0x19ffff irq 2 compat comcerto,ethernet (no driver attached)
uart0: <16550 or compatible> mem 0x90000-0x93fff irq 9 on simplebus1
uart0: console (115200,n,8,1)
intr_setup_irq(): irq 41 add handler error 0 on uart0
uart0: fast interrupt
uart0: PPS capture mode: DCD
uart1: <ns8250> mem 0x94000-0x97fff irq 10 on simplebus1
intr_setup_irq(): irq 58 add handler error 0 on uart1
uart1: fast interrupt
uart1: PPS capture mode: DCD
simplebus1: <spi@98000> mem 0x98000-0x9bfff irq 11 compat comcerto,spi (no driver attached)
simplebus1: <i2c@9c000> mem 0x9c000-0x9ffff irq 12 compat comcerto,i2c (no driver attached)
gpio0: <Comcerto General Purpose I/O> mem 0x70000-0x7ffff irq 13,14,15,16,17,18,19,20 on simplebus1
gpiobus0: <GPIO bus> on gpio0
gpioc0: <GPIO controller> on gpio0
ehci0: <Comcerto USB controller> mem 0xf000000-0xf7fffff irq 0 on ofwbus0
intr_setup_irq(): irq 5 add handler error 0 on ehci0
usbus0: EHCI version 1.0
usbus0: stop timeout
usbus0 on ehci0
ehci0: usbpf: Attached
cfi0: <AMD/Fujitsu - 32MB> mem 0x20000000-0x20ffffff on ofwbus0
cfi0: [256x128KB]
cfi0: Manufacturer ID:c2 Device ID:227e
cfid0 on cfi0
Timecounters tick every 10.000 msec
lo0: bpf attached
vlan: initialized, using hash tables with chaining
tcp_init: net.inet.tcp.tcbhashsize auto tuned to 1024
GEOM: new disk cfid0
MAP: No valid partition found at cfid0
usbus0: 480Mbps High Speed USB v2.0
Trying to mount root from cd9660:/dev/cfid0s.rootfs.uzip []...
ugen0.1: <vendor 0x0000 EHCI root HUB> at usbus0
uhub0 on usbus0
uhub0: <vendor 0x0000 EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
cfid0: slice 00000000-0003ffff: u-boot (255KB)
cfid0: slice 00040000-0005ffff: env (127KB)
cfid0: slice 00060000-0007ffff: data (127KB)
cfid0: slice 00080000-0009ffff: wlan (127KB)
cfid0: slice 000a0000-0019ffff: config (1023KB)
cfid0: slice 001a0000-0030ffff: kernel (1471KB)
cfid0: slice 00310000-0070ffff: rootfs (4095KB)
MAP: No valid partition found at cfid0s.u-boot
MAP: No valid partition found at cfid0s.env
MAP: No valid partition found at cfid0s.data
MAP: No valid partition found at cfid0s.wlan
MAP: No valid partition found at cfid0s.config
MAP: No valid partition found at cfid0s.kernel
MAP: No valid partition found at cfid0s.rootfs
MAP: No valid partition found at cfid0s.rootfs.uzip
cd9660: RockRidge Extension
Warning: no time-of-day clock registered, system time will not be set accurately
start_init: trying /sbin/init
uhub0: 1 port with 1 removable, self powered
Enter full pathname of shell or RETURN for /bin/sh: