Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].


Date: 2019-11-14 02:21:54
From: afresh1
Description: OpenBSD 6.6-current (GENERIC.MP) arm64 on Raspberry Pi 3 Model B Rev 1.2
OpenBSD 6.6-current (GENERIC.MP) #320: Mon Nov 11 13:36:33 MST 2019
    [_EMAIL_XXXXXXXXXXXXXXXX]:/usr/src/sys/arch/arm64/compile/GENERIC.MP
real mem  = 959279104 (914MB)
avail mem = 899764224 (858MB)
mainbus0 at root: Raspberry Pi 3 Model B Rev 1.2
cpu0 at mainbus0 mpidr 0: ARM Cortex-A53 r0p4
cpu0: 32KB 64b/line 2-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache
cpu0: 512KB 64b/line 16-way L2 cache
efi0 at mainbus0: UEFI 2.7
efi0: Das U-Boot rev 0x0
apm0 at mainbus0
simplefb0 at mainbus0: 656x416, 32bpp
wsdisplay0 at simplefb0 mux 1
wsdisplay0: screen 0-5 added (std, vt100 emulation)
"system" at mainbus0 not configured
"axi" at mainbus0 not configured
"thermal-zones" at mainbus0 not configured
simplebus0 at mainbus0: "soc"
"dma" at simplebus0 not configured
bcmintc0 at simplebus0
bcmdog0 at simplebus0
"cprman" at simplebus0 not configured
bcmrng0 at simplebus0
"mailbox" at simplebus0 not configured
"gpio" at simplebus0 not configured
pluart0 at simplebus0
"mmc" at simplebus0 not configured
"dsi" at simplebus0 not configured
bcmtemp0 at simplebus0
bcmaux0 at simplebus0
com0 at simplebus0: ns16550, no working fifo
com0: console
dwctwo0 at simplebus0
"local_intc" at simplebus0 not configured
"mmc" at simplebus0 not configured
"gpiomem" at simplebus0 not configured
"firmware" at simplebus0 not configured
"power" at simplebus0 not configured
"fb" at simplebus0 not configured
"vchiq" at simplebus0 not configured
"vcsm" at simplebus0 not configured
"arm-pmu" at simplebus0 not configured
"virtgpio" at simplebus0 not configured
"expgpio" at simplebus0 not configured
simplebus1 at mainbus0: "clocks"
"clock" at simplebus1 not configured
"clock" at simplebus1 not configured
"phy" at mainbus0 not configured
agtimer0 at mainbus0: tick rate 19200 KHz
"fixedregulator_5v0" at mainbus0 not configured
"fixedregulator_3v3" at mainbus0 not configured
"leds" at mainbus0 not configured
"__overrides__" at mainbus0 not configured
"__symbols__" at mainbus0 not configured
cpu1 at mainbus0 mpidr 1: ARM Cortex-A53 r0p4
cpu1: 32KB 64b/line 2-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache
cpu1: 512KB 64b/line 16-way L2 cache
cpu2 at mainbus0 mpidr 2: ARM Cortex-A53 r0p4
cpu2: 32KB 64b/line 2-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache
cpu2: 512KB 64b/line 16-way L2 cache
cpu3 at mainbus0 mpidr 3: ARM Cortex-A53 r0p4
cpu3: 32KB 64b/line 2-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache
cpu3: 512KB 64b/line 16-way L2 cache
usb0 at dwctwo0: USB revision 2.0
uhub0 at usb0 configuration 1 interface 0 "Broadcom DWC2 root hub" rev 2.00/1.00 addr 1
uhub1 at uhub0 port 1 configuration 1 interface 0 "Standard Microsystems product 0x9514" rev 2.00/2.00 addr 2
smsc0 at uhub1 port 1 configuration 1 interface 0 "Standard Microsystems SMSC9512/14" rev 2.00/2.00 addr 3
smsc0: address [_MAC_XXXXXXXXXX]
ukphy0 at smsc0 phy 1: Generic IEEE 802.3u media interface, rev. 3: OUI 0x0001f0, model 0x000c
umass0 at uhub1 port 3 configuration 1 interface 0 "SanDisk Ultra Fit" rev 2.10/1.00 addr 4
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, initiator 0
sd0 at scsibus0 targ 1 lun 0: <SanDisk, Ultra Fit, 1.00> removable serial.07815583250226100413
sd0: 14663MB, 512 bytes/sector, 30031250 sectors
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
bootfile: sd0a:/bsd
boot device: sd0
root on sd0a (32eca3907bcda1f2.a) swap on sd0b dump on sd0b
WARNING: CHECK AND RESET THE DATE!