Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2019-11-22 06:27:54
From: yamori813
Description: Softbank_E-WMTA22
Starting kernel ...
initarm: console initialized
arg1 kmdp = 0xc03be378
boothowto = 0x00000000
dtbp = 0xc035eae8
lastaddr1: 0x803ec000
loader passed (static) kenv:
no env, null ptr
---<<BOOT>>---
ARM Debug Architecture v6
2 watchpoints and 6 breakpoints supported
KDB: debugger backends: ddb
KDB: current backend: ddb
CPU(0) applied BP hardening: not necessary
Copyright (c) 1992-2019 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 13.0-CURRENT #116 81cdc5bc8ba-c264170(zrouter)-dirty: Fri Nov 22 15:21:34 JST 2019
hiroki@zrouter:/usr/home/hiroki/zobj/usr/home/hiroki/ZRouter/tmp/usr/home/hiroki/freebsd/arm.armv6/sys/Softbank_E-WMTA22 arm
FreeBSD clang version 9.0.0 (tags/RELEASE_900/final 372316) (based on LLVM 9.0.0)
Preloaded elf kernel "kernel" at 0xc03be378.
CPU: ARM ARM1136 r1p5 (ECO: 0x00000000)
CPU Features:
Thumb, VMSAv7
Optional instructions:
UMULL, SMULL, MLA, SIMD(ext)
64KB/32B 4-way instruction cache
64KB/32B 4-way WB data cache
real memory = 134217728 (128 MB)
avail memory = 126042112 (120 MB)
Physical memory chunk(s):
0x80000000 - 0x87ffffff, 128 MB ( 32768 pages)
Excluded memory regions:
0x80000000 - 0x8043cfff, 4 MB ( 1085 pages) NoAlloc
Avail lists:
phys_avail[0] 0x8043d000
phys_avail[1] 0x87d53000
dump_avail[0] 0x80000000
dump_avail[1] 0x88000000
Static device mappings:
0x0f000000 - 0x0f7fffff mapped at VA 0xff700000
0x10000000 - 0x10ffffff mapped at VA 0xfe700000
0x20000000 - 0x20ffffff mapped at VA 0xfd700000
arc4random: WARNING: initial seeding bypassed the cryptographic random device because it was not yet seeded and the knob 'bypass_before_seeding' was enabled.
ULE: setup cpu 0
random: entropy device external interface
mem: <memory>
null: <full device, null device, zero device>
openfirm: <Open Firmware control device>
ofwbus0: <Open Firmware Device Tree>
simplebus0: <Flattened device tree simple bus> on ofwbus0
simplebus1: <Flattened device tree simple bus> on ofwbus0
pic0: <Comcerto Interrupt Controller> mem 0xa0000-0xaffff on simplebus1
intr_pic_register(): PIC 0xc0d617c0 registered for pic0 <dev 0xc0b4e980, xref 1>
intr_pic_claim_root(): irq root set to pic0
timer0: <Comcerto Timer> mem 0x50000-0x5ffff irq 3,4,5,6,7,8 on simplebus1
intr_setup_irq(): irq 31 add handler error 0 on timer0
Event timer "Comcerto Timer0" frequency 125000000 Hz quality 1000
Timecounter "Comcerto Timer1" frequency 125000000 Hz quality 1000
cpulist0: <Open Firmware CPU Group> on ofwbus0
cpu0: <Open Firmware CPU> on cpulist0
cpu0: Nominal frequency 650Mhz
cpu1: <Open Firmware CPU> on cpulist0
cpu1: Nominal frequency 650Mhz
cge0: <Comcerto Ethernet interface> mem 0xd0000-0xdffff irq 1 on simplebus1
mii_attach_proxy: not attaching, no mdio device hint for cge0
cge0: bpf attached
cge0: Ethernet address: [_MAC_XXXXXXXXXX]
intr_setup_irq(): irq 6 add handler error 0 on cge0
cge1: <Comcerto Ethernet interface> mem 0x190000-0x19ffff irq 2 on simplebus1
mii_attach_proxy: not attaching, no mdio device hint for cge1
cge1: bpf attached
cge1: Ethernet address: [_MAC_XXXXXXXXXX]
intr_setup_irq(): irq 7 add handler error 0 on cge1
cgemdio0: <Comcerto built-in ethernet interface, MDIO controller> mem 0xd0000-0xdffff on simplebus1
mdio0: <MDIO> on cgemdio0
mdioproxy0: <MII/MDIO proxy, MDIO side> on mdio0
arswitch0: <Atheros AR8316 Ethernet Switch (ver 1 rev 1)> on mdio0
arswitch0: ar8316_hw_setup: MAC port == RGMII, port 4 = dedicated PHY
arswitch0: ar8316_hw_setup: port 4 RGMII workaround
miibus0: <MII bus> on arswitch0
ukphy0: <Generic IEEE 802.3u media interface> PHY 0 on miibus0
ukphy0: OUI 0x00c82e, model 0x0004, rev. 1
ukphy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto
miibus1: <MII bus> on arswitch0
ukphy1: <Generic IEEE 802.3u media interface> PHY 1 on miibus1
ukphy1: OUI 0x00c82e, model 0x0004, rev. 1
ukphy1: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto
miibus2: <MII bus> on arswitch0
ukphy2: <Generic IEEE 802.3u media interface> PHY 2 on miibus2
ukphy2: OUI 0x00c82e, model 0x0004, rev. 1
ukphy2: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto
miibus3: <MII bus> on arswitch0
ukphy3: <Generic IEEE 802.3u media interface> PHY 3 on miibus3
ukphy3: OUI 0x00c82e, model 0x0004, rev. 1
ukphy3: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto
mdio1: <MDIO> on arswitch0
mdioproxy1: <MII/MDIO proxy, MDIO side> on mdio1
etherswitch0: <Switch controller> on arswitch0
uart0: <16550 or compatible> mem 0x90000-0x93fff irq 9 on simplebus1
uart0: console (115200,n,8,1)
intr_setup_irq(): irq 41 add handler error 0 on uart0
uart0: fast interrupt
uart0: PPS capture mode: DCD
uart1: <ns8250> mem 0x94000-0x97fff irq 10 on simplebus1
intr_setup_irq(): irq 58 add handler error 0 on uart1
uart1: fast interrupt
uart1: PPS capture mode: DCD
simplebus1: <spi@98000> mem 0x98000-0x9bfff irq 11 compat comcerto,spi (no driver attached)
simplebus1: <i2c@9c000> mem 0x9c000-0x9ffff irq 12 compat comcerto,i2c (no driver attached)
gpio0: <Comcerto General Purpose I/O> mem 0x70000-0x7ffff irq 13,14,15,16,17,18,19,20 on simplebus1
gpiobus0: <GPIO bus> on gpio0
gpioc0: <GPIO controller> on gpio0
ehci0: <Comcerto USB controller> mem 0xf000000-0xf7fffff irq 0 on ofwbus0
intr_setup_irq(): irq 5 add handler error 0 on ehci0
usbus0: EHCI version 1.0
usbus0: stop timeout
usbus0 on ehci0
ehci0: usbpf: Attached
cfi0: <AMD/Fujitsu - 32MB> mem 0x20000000-0x20ffffff on ofwbus0
cfi0: [256x128KB]
cfi0: Manufacturer ID:c2 Device ID:227e
cfid0 on cfi0
Timecounters tick every 10.000 msec
vlan: initialized, using hash tables with chaining
lo0: bpf attached
tcp_init: net.inet.tcp.tcbhashsize auto tuned to 1024
arswitch0port1: link state changed to DOWN
arswitch0port2: link state changed to DOWN
arswitch0port3: link state changed to DOWN
arswitch0port4: link state changed to DOWN
GEOM: new disk cfid0
usbus0: 480Mbps High Speed USB v2.0
MAP: No valid partition found at cfid0
cfid0: slice 00000000-0003ffff: u-boot (255KB)
cfid0: slice 00040000-0005ffff: env (127KB)
cfid0: slice 00060000-0007ffff: data (127KB)
cfid0: slice 00080000-0009ffff: wlan (127KB)
cfid0: slice 000a0000-0019ffff: config (1023KB)
cfid0: slice 001a0000-0030ffff: kernel (1471KB)
cfid0: slice 00340000-0073ffff: rootfs (4095KB)
ugen0.1: <Mindspeed EHCI root HUB> at usbus0
uhub0 on usbus0
uhub0: <Mindspeed EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
MAP: No valid partition found at cfid0s.u-boot
MAP: No valid partition found at cfid0s.env
MAP: No valid partition found at cfid0s.data
MAP: No valid partition found at cfid0s.wlan
MAP: No valid partition found at cfid0s.config
MAP: No valid partition found at cfid0s.kernel
MAP: No valid partition found at cfid0s.rootfs
Trying to mount root from cd9660:da0 []...
Root mount waiting for: usbus0
uhub0: 1 port with 1 removable, self powered
mountroot: waiting for device da0...
Mounting from cd9660:da0 failed with error 19.
Loader variables:
Manual root filesystem specification:
<fstype>:<device> [options]
Mount <device> using filesystem <fstype>
and with the specified (optional) option list.
eg. ufs:/dev/da0s1a
zfs:zroot/ROOT/default
cd9660:/dev/cd0 ro
(which is equivalent to: mount -t cd9660 -o ro /dev/cd0 /)
? List valid disk boot devices
. Yield 1 second (for background tasks)
<empty line> Abort manual input
mountroot>