Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].
Date: 2019-11-23 05:33:07
From: Low power
Description: Force10 S60 switch with Freescale MPC8536E processor and 2 GiB RAM running FTOS 8.3.3.4f based on NetBSD 1.6.1
Force10 Release[_IP_XX]f
NetBSD 1.6.1 (SIERRA) #0: Mon May 23 08:13:35 PDT 2011
build@ecluster-sjc-01:/work/build/buildSpaces/build02/E8-3-3/SW-NetBSD/usr/src/sys/arch/bacardi/compile/SIERRA
Model: Freescale Semiconductor CDS
total memory = 2048 MB
avail memory = 1962 MB
using 2000 buffers containing 8000 KB of memory
mainbus0 (root)
cpu0 at mainbus0: Version 803f0091
cpu0: 999 MHz core clock
cpu0: 32KB/32B 8-way Instruction cache, lockable, parity protected
cpu0: 32KB/32B 8-way Data cache, lockable, parity protected
ccsr0 at mainbus0: Configuration, Control, and Status registers
com0 at ccsr0 addr 0x4500: ns16550a, working fifo
com0: console
com0: interrupting at int irq 26
com1 at ccsr0 addr 0x4600: ns16550a, working fifo
com1: interrupting at int irq 26
ehci0 at ccsr0 addr 0x22100 : operating in host mode
ehci_ccsr_attach:199 unit: 0 usb_ccsr_sc: 0x8239b800
ehci0: offs=64
ehci0: interrupting at int irq 12
ehci0: 2.0 USB rev
ehci0: EHCI version 1.0
usb0 at ehci0: USB revision 2.0
uhub0 at usb0
uhub0: vendor 0x0000 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub0: 1 port with 1 removable, self powered
sdhc0 at ccsr0 addr 0x2e000
sdhc0: interrupting at int irq 56
sdhc0: Allocating dmamap for 262144 bytes
sdhc0: Host controller version: 0x1
sdmmc0 at sdhc0
spi0 at ccsr0 addr 0x7000: eSPI interface
spi_flash0 at spi0: 256KB SPI flash. Mfg ID: 0x20 0x20 0x12 0x10 0
eccdev0 at ccsr0:DDR: virt addr: 0xfff02e00 ilvl: int irq 2
:L2: virt addr: 0xfff20e00 ilvl: int irq 0: ECC interface
fpga0 at ccsr0 addr 0x5018: Last reset cause: 0x4; : S60 FPGA BoardId: 0x7412 0x1ff. Virt addr: 0x9431a000
pcehb0 at ccsr0 addr 0x9000pcehb0: vendor 0x1957 product 0x0050 (rev. 0x91)
mem base b0000000io base ffc30000
pci0 at pcehb0
pci0: i/o space, memory space enabled, rd/line, rd/mult ok
nbsd_kbde0 at pci0 dev 0 function 0nbsd_kbde_attach invoked 0
PCI_COMMAND_STATUS_REG VALUE :1048902
BCM device 46644 and revision 17
THIS IS 64 BIT ADDR SPACE
PCI_BAR_LOW :B0000004 -- MEMORY MAPPED PCI_BAR_HIGH:0
Address : 0xb0000004 Address1 : 0x00000000
Mask : 0xfffc0004 Mask1 : 0xffffffff
PCI BUS HANDLE:9441A000 TAG:0xc118d0 ADDR:B0000000 SIZE:40000
MEM TAG OF BSC 0xc118d0 VADDR PTR: (0x9441a000)
INT REG:00000101
enter :kbde_dmamem_alloc
_dma_pbase = 0x4000000
kva=0x9445a000/0x800000,map=0x82397b40,nsegs=1,pa=4000000/800000
DMA VBASE:0x9445a000 DMA PBASE:4000000
pcehb1 at ccsr0 addr 0xa000pcehb1: vendor 0x1957 product 0x0050 (rev. 0x91)
mem base a0000000io base ffc10000
pci1 at pcehb1
pci1: i/o space, memory space enabled, rd/line, rd/mult ok
nbsd_kbde1 at pci1 dev 0 function 0nbsd_kbde_attach invoked 0
PCI_COMMAND_STATUS_REG VALUE :1048902
BCM device 46648 and revision 17
THIS IS 64 BIT ADDR SPACE
PCI_BAR_LOW :A0000004 -- MEMORY MAPPED PCI_BAR_HIGH:0
Address : 0xa0000004 Address1 : 0x00000000
Mask : 0xfffc0004 Mask1 : 0xffffffff
PCI BUS HANDLE:94C5A000 TAG:0xc11958 ADDR:A0000000 SIZE:40000
MEM TAG OF BSC 0xc11958 VADDR PTR: (0x94c5a000)
INT REG:00000100
pcehb2 at ccsr0 addr 0xb000pcehb2: vendor 0x1957 product 0x0050 (rev. 0x91)
mem base c0000000io base ffc20000
pci2 at pcehb2
pci2: i/o space, memory space enabled, rd/line, rd/mult ok
nbsd_kbde2 at pci2 dev 0 function 0nbsd_kbde_attach invoked 0
PCI_COMMAND_STATUS_REG VALUE :1048902
BCM device 47414 and revision 17
THIS IS 64 BIT ADDR SPACE
PCI_BAR_LOW :C0000004 -- MEMORY MAPPED PCI_BAR_HIGH:0
Address : 0xc0000004 Address1 : 0x00000000
Mask : 0xfffc0004 Mask1 : 0xffffffff
PCI BUS HANDLE:94C9A000 TAG:0xc119e0 ADDR:C0000000 SIZE:40000
MEM TAG OF BSC 0xc119e0 VADDR PTR: (0x94c9a000)
INT REG:00000101
tsec0 at ccsr0 addr 0x24000: Three Speed Ethernet Controller
tsec0: MAC address: [_MAC_XXXXXXXXXX]
ifmedia_init
tsec0: tx interrupting on LVL13 (int irq 13)
tsec0: rx interrupting on LVL14 (int irq 14)
tsec0: error interrupting on LVL13 (int irq 18)
ukphy0 at tsec0 phy 12: Generic IEEE 802.3u media interface
ukphy0: OUI 0x000af7, model 0x002b, rev. 4
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
i2c0 at ccsr0 addr 0x3000<6>i2cInit: I2C interface
iic0 at i2c0: I2C bus
ad741x0 at iic0 addr 0x48: AD7414/5 Temperature sensors - Base board at line 0 pca0
ad741x1 at iic0 addr 0x49: AD7414/5 Temperature sensors - Base board at line 0 pca0
ad741x2 at iic0 addr 0x4a: AD7414/5 Temperature sensors - Base board at line 0 pca0
ad741x3 at iic0 addr 0x4c: AD7414/5 Temperature sensors - Base board with shutdown control at line 4 pca0
ad741x4 at iic0 addr 0x48: AD7414/5 Temperature sensors - Base board at line 6 pca0
ad741x5 at iic0 addr 0x49: AD7414/5 Temperature sensors - Base board at line 6 pca0
ad741x6 at iic0 addr 0x48: AD7414/5 Temperature sensors - PSU slot0 at line 3 pca0
ad741x7 at iic0 addr 0x48: AD7414/5 Temperature sensors - PSU slot1 at line 2 pca0
s2eeprom0 at iic0 addr 0x50: AT24Cxx EEPROM - Dimm0 at line 1 pca0
s2eeprom4 at iic0 addr 0x54: AT24Cxx EEPROM - PSU Slot0 at line 3 pca0
s2eeprom5 at iic0 addr 0x54: AT24Cxx EEPROM - PSU Slot1 at line 2 pca0
pcamux0 at iic0 addr 0x70: PCA9548 8-channel I2c bus switch
emc2303x0 at iic0 addr 0x4d: EMC2303 RPM based fan controller - PSU slot0 at line 3 pca0
emc2303x1 at iic0 addr 0x4d: EMC2303 RPM based fan controller - PSU slot1 at line 2 pca0
ucd0 at iic0 addr 0x7e: UCD90120 12 channel sequencer and system health monitor
i2c1 at ccsr0 addr 0x3100<6>i2cInit: I2C interface
iic1 at i2c1: I2C bus
m41t0 at iic1 addr 0x68: M41T00 Real-time Clock
ad741x8 at iic1 addr 0x48: AD7414/5 Temperature sensors - Optional Slot0 at line 6 pca1
ad741x9 at iic1 addr 0x48: AD7414/5 Temperature sensors - Optional Slot1 at line 7 pca1
sfpx0 at iic1 addr 0x50: SFP eeprom at addr 0x50
sfpx1 at iic1 addr 0x51: SFP eeprom at addr 0x51
sfpx2 at iic1 addr 0x56: SFP eeprom at addr 0x56
s2eeprom1 at iic1 addr 0x54: AT24Cxx EEPROM - Base board at line 5 pca1
s2eeprom2 at iic1 addr 0x54: AT24Cxx EEPROM - Optional Slot0 at line 6 pca1
s2eeprom3 at iic1 addr 0x54: AT24Cxx EEPROM - Optional Slot1 at line 7 pca1
pcamux1 at iic1 addr 0x70: PCA9548 8-channel I2c bus switch
pcamux2 at iic1 addr 0x71: PCA9548 8-channel I2c bus switch
pcamux3 at iic1 addr 0x71: PCA9548 8-channel I2c bus switch
bootflash0 at ccsr0 addr 0x5000: Virt addr: 0x94cdc000: Spansion 128MB bootflash
bcnp pseduo-device
bcmw pseduo-device
bcmwstk pseduo-device
bcmws pseduo-device
md0: internal 6144 KB image area
ust device
sierradiag as pseudo-device
crshntfy pseudo-device
bshell pseudo-device
ld0 at sdmmc0: SD08G MID: 0x45 OID: 0x24 S/N: 0x1c002a46
ld0: 7678 MB, 3899 cyl, 64 head, 63 sec, 512 bytes/sect x 15724544 sectors
boot device: <unknown>
root on md0a dumps on md0b
inittodr: rtc not present - CHECK AND RESET THE DATE.
root file system type: ffs