Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2019-11-28 08:23:53
From: vlado
Description: Intel Atom CPU D525 FreeBSD 12.1-RELEASE r354233 GENERIC amd64
---<<BOOT>>--- Copyright (c) 1992-2019 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 12.1-RELEASE r354233 GENERIC amd64 FreeBSD clang version 8.0.1 (tags/RELEASE_801/final 366581) (based on LLVM 8.0.1) VT(vga): resolution 640x480 CPU: Intel(R) Atom(TM) CPU D525 @ 1.80GHz (1800.10-MHz K8-class CPU) Origin="GenuineIntel" Id=0x106ca Family=0x6 Model=0x1c Stepping=10 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x40e31d<SSE3,DTES64,MON,DS_CPL,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE> AMD Features=0x20100800<SYSCALL,NX,LM> AMD Features2=0x1<LAHF> TSC: P-state invariant, performance statistics real memory = 4294967296 (4096 MB) avail memory = 4088463360 (3899 MB) Event timer "LAPIC" quality 100 ACPI APIC Table: <INTEL D525MW > FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 hardware threads random: unblocking device. Firmware Warning (ACPI): 32/64X length mismatch in FADT/Pm1aEventBlock: 32/16 (20181213/tbfadt-748) Firmware Warning (ACPI): 32/64X length mismatch in FADT/PmTimerBlock: 32/24 (20181213/tbfadt-748) Firmware Warning (ACPI): Invalid length for FADT/Pm1aEventBlock: 16, using default 32 (20181213/tbfadt-850) Firmware Warning (ACPI): Invalid length for FADT/PmTimerBlock: 24, using default 32 (20181213/tbfadt-850) ioapic0: Changing APIC ID to 8 ioapic0 <Version 2.0> irqs 0-23 on motherboard Launching APs: 3 2 1 Timecounter "TSC" frequency 1800100890 Hz quality 1000 random: entropy device external interface kbd1 at kbdmux0 000.000023 [4335] netmap_init netmap: loaded module [ath_hal] loaded module_register_init: MOD_LOAD (vesa, 0xffffffff8112e050, 0) error 19 [ath_dfs] loaded [ath_rate] loaded [ar9300] loaded [ar5212] loaded [ar5416] loaded [ar5211] loaded [ar5210] loaded [ath] loaded nexus0 vtvga0: <VT VGA driver> on motherboard cryptosoft0: <software crypto> on motherboard acpi0: <INTEL D525MW> on motherboard acpi0: Power Button (fixed) cpu0: <ACPI CPU> on acpi0 atrtc0: <AT realtime clock> port 0x70-0x71,0x74-0x77 irq 8 on acpi0 atrtc0: registered as a time-of-day clock, resolution 1.000000s Event timer "RTC" frequency 32768 Hz quality 0 attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed03fff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 Event timer "HPET" frequency 14318180 Hz quality 450 Event timer "HPET1" frequency 14318180 Hz quality 440 Event timer "HPET2" frequency 14318180 Hz quality 440 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 acpi_button0: <Sleep Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 vgapci0: <VGA-compatible display> port 0x20c0-0x20c7 mem 0xe0300000-0xe037ffff,0xd0000000-0xdfffffff,0xe0200000-0xe02fffff irq 16 at device 2.0 on pci0 agp0: <Intel Pineview SVGA controller> on vgapci0 agp0: aperture size is 256M, detected 8188k stolen memory vgapci0: Boot video device hdac0: <Intel 82801G HDA Controller> mem 0xe0380000-0xe0383fff irq 22 at device 27.0 on pci0 pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0 pcib1: failed to allocate initial prefetch window: 0xe0000000-0xe00fffff pcib1: [GIANT-LOCKED] pci1: <ACPI PCI bus> on pcib1 re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0x1000-0x10ff irq 16 at device 0.0 on pci1 re0: Using 1 MSI-X message re0: Chip rev. 0x5c800000 re0: MAC rev. 0x00200000 miibus0: <MII bus> on re0 ukphy0: <Generic IEEE 802.3u media interface> PHY 1 on miibus0 ukphy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseT4, auto, auto-flow re0: Using defaults for TSO: 65518/35/2048 re0: Ethernet address: [_MAC_XXXXXXXXXX] re0: netmap queues/slots: TX 1/256, RX 1/256 pcib2: <ACPI PCI-PCI bridge> at device 28.1 on pci0 pcib2: failed to allocate initial memory window: 0xe0100000-0xe01fffff pcib2: [GIANT-LOCKED] pci2: <ACPI PCI bus> on pcib2 ath0: <Atheros AR938x> irq 17 at device 0.0 on pci2 ar9300_flash_map: unimplemented for now Restoring Cal data from DRAM Restoring Cal data from EEPROM Restoring Cal data from Flash Restoring Cal data from Flash Restoring Cal data from OTP ar9300_hw_attach: ar9300_eeprom_attach returned 0 ath0: [HT] enabling HT modes ath0: [HT] enabling short-GI in 20MHz mode ath0: [HT] 1 stream STBC receive enabled ath0: [HT] 1 stream STBC transmit enabled ath0: [HT] LDPC transmit/receive enabled ath0: [HT] 3 RX streams; 3 TX streams ath0: AR9380 mac 448.3 RF5110 phy 0.0 ath0: 2GHz radio: 0x0000; 5GHz radio: 0x0000 pcib3: <ACPI PCI-PCI bridge> at device 28.2 on pci0 pcib3: [GIANT-LOCKED] pcib4: <ACPI PCI-PCI bridge> at device 28.3 on pci0 pcib4: [GIANT-LOCKED] uhci0: <Intel 82801G (ICH7) USB controller USB-A> port 0x2080-0x209f irq 23 at device 29.0 on pci0 uhci0: LegSup = 0x2f00 usbus0 on uhci0 usbus0: 12Mbps Full Speed USB v1.0 uhci1: <Intel 82801G (ICH7) USB controller USB-B> port 0x2060-0x207f irq 19 at device 29.1 on pci0 uhci1: LegSup = 0x2f00 usbus1 on uhci1 usbus1: 12Mbps Full Speed USB v1.0 uhci2: <Intel 82801G (ICH7) USB controller USB-C> port 0x2040-0x205f irq 18 at device 29.2 on pci0 uhci2: LegSup = 0x2f00 usbus2 on uhci2 usbus2: 12Mbps Full Speed USB v1.0 uhci3: <Intel 82801G (ICH7) USB controller USB-D> port 0x2020-0x203f irq 16 at device 29.3 on pci0 uhci3: LegSup = 0x2f00 usbus3 on uhci3 usbus3: 12Mbps Full Speed USB v1.0 ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0xe0384400-0xe03847ff irq 23 at device 29.7 on pci0 usbus4: EHCI version 1.0 usbus4 on ehci0 usbus4: 480Mbps High Speed USB v2.0 pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci3: <ACPI PCI bus> on pcib5 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH7 SATA300 controller> port 0x20b8-0x20bf,0x20cc-0x20cf,0x20b0-0x20b7,0x20c8-0x20cb,0x20a0-0x20af mem 0xe0384000-0xe03843ff irq 18 at device 31.2 on pci0 ata2: <ATA channel> at channel 0 on atapci0 ata3: <ATA channel> at channel 1 on atapci0 ppc0: <Parallel port> port 0x378-0x37f irq 7 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/16 bytes threshold ppbus0: <Parallel port bus> on ppc0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 orm0: <ISA Option ROM> at iomem 0xce000-0xcefff pnpid ORM0000 on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 12. Timecounters tick every 1.000 msec hdacc0: <Realtek ALC662 HDA CODEC> at cad 0 on hdac0 hdaa0: <Realtek ALC662 Audio Function Group> at nid 1 on hdacc0 pcm0: <Realtek ALC662 (Analog)> at nid 20 and 24,25,26 on hdaa0 pcm1: <Realtek ALC662 (Rear Digital)> at nid 30 on hdaa0 pcm2: <Realtek ALC662 (Front Analog Headphones)> at nid 27 on hdaa0 ugen3.1: <Intel UHCI root HUB> at usbus3 ugen2.1: <Intel UHCI root HUB> at usbus2 ugen1.1: <Intel UHCI root HUB> at usbus1 ugen4.1: <Intel EHCI root HUB> at usbus4 uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3 uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4 ugen0.1: <Intel UHCI root HUB> at usbus0 uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 uhub0: 2 ports with 2 removable, self powered uhub1: 2 ports with 2 removable, self powered uhub2: 2 ports with 2 removable, self powered uhub4: 2 ports with 2 removable, self powered ada0 at ata2 bus 0 scbus0 target 0 lun 0 ada0: <WDC WDS120G2G0A-00JH30 UE500000> ACS-2 ATA SATA 3.x device ada0: [_SERIAL_NUMBER_XXXXXXXXX] ada0: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 512bytes) ada0: 114480MB (234455040 512 byte sectors) ada1 at ata3 bus 0 scbus1 target 0 lun 0 ada1: <WDC WDS120G2G0A-00JH30 UE500000> ACS-2 ATA SATA 3.x device ada1: [_SERIAL_NUMBER_XXXXXXXXX] ada1: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 512bytes) ada1: 114480MB (234455040 512 byte sectors) Trying to mount root from ufs:/dev/ada0s1a [rw]... wlan0: Ethernet address: [_MAC_XXXXXXXXXX] uhub3: 8 ports with 8 removable, self powered lo0: link state changed to UP ugen4.2: <USB Device USB 2.0 Hub> at usbus4 uhub5 on uhub3 uhub5: <USB Device USB 2.0 Hub, class 9/0, rev 2.00/0.00, addr 2> on usbus4 uhub5: 4 ports with 4 removable, self powered ugen4.3: <Logitech USB Receiver> at usbus4 ukbd0 on uhub5 ukbd0: <Logitech USB Receiver, class 0/0, rev 2.00/12.03, addr 3> on usbus4 kbd2 at ukbd0 re0: link state changed to UP ums0 on uhub5 ums0: <Logitech USB Receiver, class 0/0, rev 2.00/12.03, addr 3> on usbus4 ums0: 16 buttons and [XYZT] coordinates ID=2 uhid0 on uhub5 uhid0: <Logitech USB Receiver, class 0/0, rev 2.00/12.03, addr 3> on usbus4 wlan0: link state changed to UP