Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].

Date: 2019-11-30 02:29:27
From: skreuzer
Description: Power Mac G4 (Graphite)
Copyright (c) 1992-2019 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 12.1-RELEASE r354233 GENERIC powerpc
gcc version 4.2.1 20070831 patched [FreeBSD]
VT(ofwfb): resolution 1024x768
cpu0: Motorola PowerPC 7400 revision 2.9, 498.44 MHz
cpu0: Features 9c000000<PPC32,ALTIVEC,FPU,MMU>
real memory  = 1043255296 (994 MB)
avail memory = 1011433472 (964 MB)
random: unblocking device.
random: entropy device external interface
kbd0 at kbdmux0
ofwbus0: <Open Firmware Device Tree> on nexus0
cpulist0: <Open Firmware CPU Group> on ofwbus0
cpu0: <Open Firmware CPU> on cpulist0
rtas0: <Run-Time Abstraction Services> on ofwbus0
rtas0: registered as a time-of-day clock, resolution 0.002000s
powermac_nvram0: <Apple NVRAM> mem 0xfff04000-0xfff07fff on ofwbus0
powermac_nvram0: bank0 generation 150, bank1 generation 149
unin0: <Apple UniNorth System Controller> mem 0xf8000000-0xf8ffffff on ofwbus0
unin0: Version 7
iichb0: <Keywest I2C controller> mem 0xf8001000-0xf8001fff irq 42 on unin0
iicbus0: <OFW I2C bus> on iichb0
pcib0: <Apple UniNorth Host-PCI bridge> mem 0xf0000000-0xf1ffffff irq 45 on ofwbus0
pci0: <OFW PCI bus> on pcib0
agp0: <Apple UniNorth AGP Bridge> on hostb0
vgapci0: <VGA-compatible display> port 0x400-0x4ff mem 0x94000000-0x97ffffff,0x90000000-0x90003fff irq 48 at device 16.0 on pci0
vgapci0: Boot video device
pcib1: <Apple UniNorth Host-PCI bridge> mem 0xf2000000-0xf3ffffff irq 44 on ofwbus0
pci1: <OFW PCI bus> on pcib1
pcib2: <OFW PCI-PCI bridge> at device 13.0 on pci1
pci2: <OFW PCI bus> on pcib2
macio0: <KeyLargo I/O Controller> mem 0x80000000-0x8007ffff at device 7.0 on pci2
openpic0: <OpenPIC Interrupt Controller> mem 0x40000-0x7ffff on macio0
macgpio0: <MacIO GPIO Controller> mem 0x50-0x7f on macio0
pmuextint0: <Apple PMU99 External Interrupt> irq 47 on macgpio0
scc0: <Zilog Z8530 dual channel SCC> mem 0x13000-0x13fff,0x8400-0x84ff,0x8500-0x85ff,0x8600-0x86ff,0x8700-0x87ff irq 22,5,6,50,7,8 on macio0
uart0: <z8530, channel A> on scc0
uart1: <z8530, channel B> on scc0
pcm0: <Apple DAVBus Audio Controller> mem 0x14000-0x14fff,0x8800-0x88ff,0x8900-0x89ff irq 24,9,10 on macio0
pcm0: codec: <screamer>
pmu0: <Apple PMU99 Controller> mem 0x16000-0x17fff irq 25 on macio0
pmu0: registered as a time-of-day clock, resolution 0.001000s
iichb1: <Keywest I2C controller> mem 0x18000-0x18fff irq 26 on macio0
iicbus1: <OFW I2C bus> on iichb1
ata0: <Apple MacIO Ultra ATA Controller> mem 0x1f000-0x1ffff,0x8a00-0x8aff irq 19,11 on macio0
ata1: <Apple MacIO ATA Controller> mem 0x20000-0x20fff,0x8b00-0x8bff irq 20,12 on macio0
ata2: <Apple MacIO ATA Controller> mem 0x21000-0x21fff,0x8c00-0x8cff irq 21,13 on macio0
sym0: <896> at device 4.0 on pci2
sym0: failed to allocate IRQ resource
device_attach: sym0 attach returned 6
ohci0: <Apple KeyLargo USB controller> mem 0x80082000-0x80082fff irq 27 at device 8.0 on pci2
usbus0 on ohci0
ohci1: <Apple KeyLargo USB controller> mem 0x80081000-0x80081fff irq 28 at device 9.0 on pci2
usbus1 on ohci1
fwohci0: <Texas Instruments TSB12LV23> mem 0x80080000-0x800807ff,0x80084000-0x80087fff irq 63 at device 10.0 on pci2
fwohci0: OHCI version 1.0 (ROM=0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 xx:xx:xx:xx:xx:xx:03:14
fwohci0: Phy 1394a available S400, 3 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: xx:xx:xx:xx:xx:xx
fwe0: Ethernet address: xx:xx:xx:xx:xx:xx
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: fwohci_intr_core: BUS reset
fwohci0: PhysicalUpperBound register is not implemented.  Physical memory access is limited to the first 4GB
fwohci0: PhysicalUpperBound = 0x00000000
fwohci0: fwohci_intr_core: node_id=0x00000000, SelfID Count=1, CYCLEMASTER mode
pcib3: <Apple UniNorth Host-PCI bridge> mem 0xf4000000-0xf5ffffff irq 43 on ofwbus0
pci3: <OFW PCI bus> on pcib3
gem0: <Apple UniNorth GMAC Ethernet> mem 0xf5200000-0xf53fffff irq 41 at device 15.0 on pci3
miibus0: <MII bus> on gem0
bmtphy0: <BCM5201 10/100 media interface> PHY 0 on miibus0
bmtphy0:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
gem0: 10kB RX FIFO, 4kB TX FIFO
gem0: Ethernet address: xx:xx:xx:xx:xx:xx
cryptosoft0: <software crypto> on nexus0
Timecounter "timebase" frequency 24907667 Hz quality 0
Event timer "decrementer" frequency 24907667 Hz quality 1000
Timecounters tick every 1.000 msec
firewire0: 1 nodes, maxhop <= 0 cable IRM irm(0)  (me)
firewire0: bus manager 0
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
ugen0.1: <Apple OHCI root HUB> at usbus0
uhub0: <Apple OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Apple OHCI root HUB> at usbus1
uhub1: <Apple OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
ugen1.2: <vendor 0x04d9 USB Keyboard> at usbus1
ukbd0 on uhub1
ukbd0: <vendor 0x04d9 USB Keyboard, class 0/0, rev 1.10/1.10, addr 2> on usbus1
kbd1 at ukbd0
ums0 on uhub1
ums0: <vendor 0x04d9 USB Keyboard, class 0/0, rev 1.10/1.10, addr 2> on usbus1
ada0 at ata0 bus 0 scbus0 target 0 lun 0
ada0: <SDCFHS-016G HDX16.01> CFA device
ada0: Serial Number xxxxxxxx
ada0: 66.700MB/s transfers (UDMA4, PIO 512bytes)
ada0: 15279MB (31293360 512 byte sectors)
Trying to mount root from ufs:/dev/ada0s3 [rw]...
cd0 at ata1 bus 0 scbus1 target 0 lun 0
cd0: <MATSHITA PD-2 LF-D110 A110> Removable CD-ROM SCSI device
cd0: 16.700MB/s transfers (WDMA2, ATAPI 12bytes, PIO 65534bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present
lo0: link state changed to UP
gem0: link state changed to DOWN
gem0: link state changed to UP