Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].
Date: 2019-12-14 10:08:27
From: YRabbit
Description: Custom I5 PC
Copyright (c) 2003-2019 The DragonFly Project.
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
DragonFly v5.7.0.1175.g63881f-DEVELOPMENT #2: Sat Dec 14 09:01:33 +10 2019
[_EMAIL_XXXXXXXX]:/usr/obj/usr/src/sys/X86_64_GENERIC_DUMP
acpi_hpet: frequency 14318180
Using cputimer HPET for TSC calibration
Timer latency (in TSC ticks): 2084 min=2000 max=2148
TSC invariant clock: 3399999938 Hz
CPU: Intel(R) Core(TM) i5-3570 CPU @ 3.40GHz (3400.00-MHz K8-class CPU)
Origin = "GenuineIntel" Id = 0x306a9 Stepping = 9
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x77bae3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,AVX,F16C,RDRND>
AMD Features=0x28000800<SYSCALL,RDTSCP,LM>
AMD Features2=0x1<LAHF>
Structured Extended Features=0x281<GSFSBASE,SMEP,ENHMOVSB>
Thermal and PM Features=0x77<SENSOR,TURBO,ARAT,PLN,ECMD,PTM>
MONITOR/MWAIT Features=0x3<CST,INTBRK>
CPU Special Features Installed: SMEP
real memory = 21416564736 (20424 MB)
avail memory = 20675579904 (19717 MB)
LAPIC: enter X2APIC mode
lapic: TSC Deadline Mode: shift 1, frequency 1699999969 Hz
CPU Topology: cores_per_chip: 4; threads_per_core: 1; chips_per_package: 1;
srat_probe: can't locate SRAT
Initialize MI interrupts for 4 cpus
TSC testing MP synchronization ...
TSC MPSYNC TEST 128 4 -> 32 (10uS=33999)
TSC is MP synchronized
TSC: cputimer freq 106249998, shift 5
Spectre: support=( none ) req=ffff operating=( none )
MDS: support=( none ) req=ffff operating=( none )
VMM: available, disabled by default
machdep.meltdown_mitigation enabled to protect against (mostly Intel) meltdown bug
system call performance will be impacted
wdog: In-kernel automatic watchdog reset enabled
evdev device loaded.
kbd1 at kbdmux0
md0: Malloc disk
interrupt uses mplock: swi_taskq
ACPI: RSDP 0x00000000000F0490 000024 (v02 ALASKA)
ACPI: XSDT 0x00000000DDA16078 00006C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0x00000000DDA210D8 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 0x00000000DDA16180 00AF51 (v02 ALASKA A M I 00000022 INTL 20051117)
ACPI: FACS 0x00000000DDB43080 000040
ACPI: APIC 0x00000000DDA211E8 000072 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 0x00000000DDA21260 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 0x00000000DDA212A8 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
ACPI: HPET 0x00000000DDA212E8 000038 (v01 ALASKA A M I 01072009 AMI. 00000005)
ACPI: SSDT 0x00000000DDA21320 00036D (v01 SataRe SataTabl 00001000 INTL 20091112)
ACPI: DMAR 0x00000000DDA22B30 000080 (v01 INTEL SNB 00000001 INTL 00000001)
ACPI: SSDT 0x00000000DDA216E8 0009AA (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
ACPI: SSDT 0x00000000DDA22098 000A92 (v01 PmRef CpuPm 00003000 INTL 20051117)
sc0: <System console> on motherboard
sc0: VGA <16 virtual consoles, flags=0x300>
cryptosoft0: <software crypto> on motherboard
acpi0: <ALASKA A M I> on motherboard
ACPI: 4 ACPI AML tables successfully acquired and loaded
ACPI FADT: SCI testing interrupt mode ...
ACPI FADT: SCI select level/high
acpi0: Power Button (fixed)
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
acpi_timer0 on acpi0
cpu0: <ACPI CPU> on acpi0
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFF800F5501300 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
cpu_cst0: <ACPI CPU C-State> on cpu0
cpu_pst0: <ACPI CPU P-State> on cpu0
clockmod0: <CPU clock modulation> on cpu0
perfbias0: <CPU perf-energy bias> on cpu0
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
cpu1: <ACPI CPU> on acpi0
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFF800F535BE00 000303 (v01 PmRef ApIst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFF8007DB77F40 000119 (v01 PmRef ApCst 00003000 INTL 20051117)
cpu_cst1: <ACPI CPU C-State> on cpu1
cpu_pst1: <ACPI CPU P-State> on cpu1
clockmod1: <CPU clock modulation> on cpu1
perfbias1: <CPU perf-energy bias> on cpu1
coretemp1: <CPU On-Die Thermal Sensors> on cpu1
cpu2: <ACPI CPU> on acpi0
cpu_cst2: <ACPI CPU C-State> on cpu2
cpu_pst2: <ACPI CPU P-State> on cpu2
clockmod2: <CPU clock modulation> on cpu2
perfbias2: <CPU perf-energy bias> on cpu2
coretemp2: <CPU On-Die Thermal Sensors> on cpu2
cpu3: <ACPI CPU> on acpi0
cpu_cst3: <ACPI CPU C-State> on cpu3
cpu_pst3: <ACPI CPU P-State> on cpu3
clockmod3: <CPU clock modulation> on cpu3
perfbias3: <CPU perf-energy bias> on cpu3
coretemp3: <CPU On-Die Thermal Sensors> on cpu3
acpi_button0: <Power Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz1: <Thermal Zone> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xe000-0xe0ff mem 0xf7e00000-0xf7e3ffff,0xf0000000-0xf07fffff,0xe0000000-0xefffffff irq 16 at device 0.0 on pci1
vgapci0: Boot video device
hdac0: <ATI (0xaac0) HDA Controller> mem 0xf7e60000-0xf7e63fff irq 17 at device 0.1 on pci1
hdac0: link ctrl 0x2820
hdac0: disable nosnoop
xhci0: <Intel Panther Point USB 3.0 controller> mem 0xf7f00000-0xf7f0ffff irq 16 at device 20.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
xhci0: Port routing mask set to 0xffffffff
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
pci0: <simple comms> (vendor 0x8086, dev 0x1e3a) at device 22.0 irq 21
ehci0: <Intel Panther Point USB 2.0 controller> mem 0xf7f18000-0xf7f183ff irq 23 at device 26.0 on pci0
usbus1: EHCI version 1.0
ugen0.1: <0x8086> at usbus0
uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
usbus1 on ehci0
usbus1: 480Mbps High Speed USB v2.0
hdac1: <Intel Panther Point HDA Controller> mem 0xf7f10000-0xf7f13fff irq 22 at device 27.0 on pci0
hdac1: link ctrl 0x800
hdac1: disable nosnoop
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0
pci3: <ACPI PCI bus> on pcib3
alc0: <Atheros AR8161 PCIe Gigabit Ethernet> port 0xd000-0xd07f mem 0xf7d00000-0xf7d3ffff irq 16 at device 0.0 on pci3
alc0: 11776 Tx FIFO, 12032 Rx FIFO
miibus0: <MII bus> on alc0
atphy0: <Atheros F1 10/100/1000 PHY> on miibus0
atphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto
atphy1: <Atheros F1 10/100/1000 PHY> on miibus0
atphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto
atphy2: <Atheros F1 10/100/1000 PHY> on miibus0
atphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto
atphy3: <Atheros F1 10/100/1000 PHY> on miibus0
atphy3: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto
atphy4: <Atheros F1 10/100/1000 PHY> on miibus0
atphy4: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto
atphy5: <Atheros F1 10/100/1000 PHY> on miibus0
atphy5: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto
atphy6: <Atheros F1 10/100/1000 PHY> on miibus0
atphy6: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto
atphy7: <Atheros F1 10/100/1000 PHY> on miibus0
atphy7: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto
atphy8: <Atheros F1 10/100/1000 PHY> on miibus0
atphy8: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto
atphy9: <Atheros F1 10/100/1000 PHY> on miibus0
atphy9: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto
atphy10: <Atheros F1 10/100/1000 PHY> on miibus0
atphy10: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto
atphy11: <Atheros F1 10/100/1000 PHY> on miibus0
atphy11: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto
ugen1.1: <Intel> at usbus1
atphy12: <Atheros F1 10/100/1000 PHY> on miibus0
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
atphy12: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto
atphy13: <Atheros F1 10/100/1000 PHY> on miibus0
atphy13: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto
atphy14: <Atheros F1 10/100/1000 PHY> on miibus0
atphy14: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto
atphy15: <Atheros F1 10/100/1000 PHY> on miibus0
atphy15: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto
atphy16: <Atheros F1 10/100/1000 PHY> on miibus0
atphy16: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto
atphy17: <Atheros F1 10/100/1000 PHY> on miibus0
atphy17: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto
atphy18: <Atheros F1 10/100/1000 PHY> on miibus0
atphy18: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto
atphy19: <Atheros F1 10/100/1000 PHY> on miibus0
atphy19: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto
atphy20: <Atheros F1 10/100/1000 PHY> on miibus0
atphy20: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto
atphy21: <Atheros F1 10/100/1000 PHY> on miibus0
atphy21: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto
atphy22: <Atheros F1 10/100/1000 PHY> on miibus0
atphy22: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto
atphy23: <Atheros F1 10/100/1000 PHY> on miibus0
atphy23: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto
atphy24: <Atheros F1 10/100/1000 PHY> on miibus0
atphy24: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto
atphy25: <Atheros F1 10/100/1000 PHY> on miibus0
atphy25: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto
atphy26: <Atheros F1 10/100/1000 PHY> on miibus0
atphy26: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto
atphy27: <Atheros F1 10/100/1000 PHY> on miibus0
atphy27: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto
atphy28: <Atheros F1 10/100/1000 PHY> on miibus0
atphy28: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto
atphy29: <Atheros F1 10/100/1000 PHY> on miibus0
atphy29: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto
atphy30: <Atheros F1 10/100/1000 PHY> on miibus0
atphy30: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto
atphy31: <Atheros F1 10/100/1000 PHY> on miibus0
atphy31: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto
alc0: MAC address: [_MAC_XXXXXXXXXX]
pcib4: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0
pci4: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> irq 17 at device 0.0 on pci4
pci5: <ACPI PCI bus> on pcib5
pcib6: <ACPI PCI-PCI bridge> irq 18 at device 28.6 on pci0
pci6: <ACPI PCI bus> on pcib6
ath0: <Atheros AR9485> mem 0xf7c00000-0xf7c7ffff irq 18 at device 0.0 on pci6
ar9300_attach: calling ar9300_hw_attach
ar9300_hw_attach: calling ar9300_eeprom_attach
ar9300_flash_map: unimplemented for now
Restoring Cal data from DRAM
Restoring Cal data from EEPROM
Restoring Cal data from Flash
Restoring Cal data from Flash
Restoring Cal data from OTP
ar9300_hw_attach: ar9300_eeprom_attach returned 0
ath0: [HT] enabling HT modes
ath0: [HT] enabling short-GI in 20MHz mode
ath0: [HT] 1 stream STBC receive enabled
ath0: [HT] 1 RX streams; 1 TX streams
ath0: AR9485 mac 576.1 RF5110 phy 1638.6
ath0: 2GHz radio: 0x0000; 5GHz radio: 0x0000
ehci1: <Intel Panther Point USB 2.0 controller> mem 0xf7f17000-0xf7f173ff irq 23 at device 29.0 on pci0
usbus2: EHCI version 1.0
usbus2 on ehci1
usbus2: 480Mbps High Speed USB v2.0
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <AHCI-PCI-SATA> port 0xf020-0xf03f,0xf040-0xf043,0xf050-0xf057,0xf060-0xf063,0xf070-0xf077 mem 0xf7f16000-0xf7f167ff irq 19 at device 31.2 on pci0
ugen2.1: <Intel> at usbus2
uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
uhub0: 8 ports with 8 removable, self powered
ahci0: Intel hocus pocus
ahci0: AHCI 1.3 cap 0xc330ff45<S64A,NCQ,SAL,SCLO,PMD,SSC,PSC,EMS> cap2 0x4<APST>, 6 ports, 32 tags/port, gen 3 (6Gbps)
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
ugen0.2: <MOSART Semi.> at usbus0
ums0: <MOSART Semi. 2.4G Wireless Mouse, class 0/0, rev 1.10/3.12, addr 1> on usbus0
ums0: 5 buttons and [XYZT] coordinates ID=3
ugen1.2: <vendor 0x8087> at usbus1
uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1
ugen2.2: <vendor 0x8087> at usbus2
uhub4: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus2
uhub3: 6 ports with 6 removable, self powered
uhub4: 8 ports with 8 removable, self powered
ugen2.3: <SEMICO> at usbus2
ukbd0: <SEMICO USB Keyboard, class 0/0, rev 1.10/1.10, addr 3> on usbus2
kbd2 at ukbd0
ukbd1: <SEMICO USB Keyboard, class 0/0, rev 1.10/1.10, addr 3> on usbus2
kbd3 at ukbd1
ahci0.0: Found DISK "WDC WD10PURX-64D85Y0 01.01A01" serial="WD-WCC4J3534790"
ahci0.0: tags=32/32 satacap=9f0e satacap2=0006 satafea=004c NCQ=YES capacity=953869.71MB
ahci0.0: f85=7469 f86=bc41 f87=6723 WC=enabled RA=enabled SEC=frozen
ahci0.1: Found SSD "KINGSTON SKC400S37128G SAFM00.W" serial="50026B7261032031"
ahci0.1: tags=32/32 satacap=e70e satacap2=0006 satafea=004c NCQ=YES capacity=122104.33MB
ahci0.1: f85=7469 f86=bc09 f87=4063 WC=enabled RA=enabled SEC=frozen
ahci0.2: Found DISK "WDC WD5000AAKX-22ERMA0 17.01H17" serial="WD-WCC2EP295836"
ahci0.2: tags=32/32 satacap=170e satacap2=0004 satafea=0044 NCQ=YES capacity=476940.02MB
ahci0.2: f85=7469 f86=bc41 f87=4123 WC=enabled RA=enabled SEC=frozen
ahci0.4: Found DISK "WDC WD10EZEX-08WN4A0 02.01A02" serial="WD-WCC6Y7RCFDEC"
ahci0.4: tags=32/32 satacap=9d0e satacap2=0004 satafea=004c NCQ=YES capacity=953869.71MB
ahci0.4: f85=3469 f86=bc09 f87=6123 WC=enabled RA=enabled SEC=frozen
pci0: <serial bus, SMBus> (vendor 0x8086, dev 0x1e22) at device 31.3 irq 18
ACPI: Enabled 4 GPEs in block 00 to 3F
aesni0: <AES-CBC,AES-XTS> on motherboard
padlock0: No ACE support.
rdrand0: <RdRand RNG> on motherboard
orm0: <ISA Option ROM> at iomem 0xc0000-0xcffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
lm0: <Winbond W83627DHG Hardware Monitor> at port 0x290-0x297 on isa0
sio0: can't drain, serial port might not exist, disabling
sio1: can't drain, serial port might not exist, disabling
hpt27xx: no controller detected.
hdacc0: <ATI R6xx HDA CODEC> at cad 0 on hdac0
hdaa0: <ATI R6xx Audio Function Group> at nid 1 on hdacc0
pcm0: <ATI R6xx (HDMI)> at nid 3 on hdaa0
pcm1: <ATI R6xx (HDMI)> at nid 5 on hdaa0
pcm2: <ATI R6xx (HDMI)> at nid 7 on hdaa0
pcm3: <ATI R6xx (HDMI)> at nid 9 on hdaa0
pcm4: <ATI R6xx (HDMI)> at nid 11 on hdaa0
pcm5: <ATI R6xx (HDMI)> at nid 13 on hdaa0
hdacc1: <VIA VT1708S_0 HDA CODEC> at cad 0 on hdac1
hdaa1: <VIA VT1708S_0 Audio Function Group> at nid 1 on hdacc1
pcm6: <VIA VT1708S_0 (Analog 7.1+HP/2.0)> at nid 28,34,25,35,29 and 26,30,27 on hdaa1
pcm7: <VIA VT1708S_0 (Digital)> at nid 32 on hdaa1
pcm8: <VIA VT1708S_0 (Rear-panel Digital)> at nid 33 on hdaa1
CAM: Configuring 4 busses
CAM: finished configuring all busses
da0 at ahci0 bus 0 target 0 lun 0
da0: <SATA WDC WD10PURX-64D 01.0> Fixed Direct Access SCSI-4 device
da0: [_SERIAL_NUMBER_XXXXXXXXXXXX]
da0: 600.000MB/s transfers
da0: 953869MB (1953525168 512 byte sectors: 255H 63S/T 121601C)
da1 at ahci0 bus 1 target 0 lun 0
da1: <SATA KINGSTON SKC400S SAFM> Fixed Direct Access SCSI-4 device
da1: [_SERIAL_NUMBER_XXXXXXXXXXXXX]
da1: 600.000MB/s transfers
da1: 122104MB (250069680 512 byte sectors: 255H 63S/T 15566C)
da1: supports TRIM
da2 at ahci0 bus 2 target 0 lun 0
da2: <SATA WDC WD5000AAKX-2 17.0> Fixed Direct Access SCSI-4 device
da2: [_SERIAL_NUMBER_XXXXXXXXXXXX]
da2: 300.000MB/s transfers
da2: 476940MB (976773168 512 byte sectors: 255H 63S/T 60801C)
da3 at ahci0 bus 4 target 0 lun 0
da3: <SATA WDC WD10EZEX-08W 02.0> Fixed Direct Access SCSI-4 device
da3: [_SERIAL_NUMBER_XXXXXXXXXXXX]
da3: 300.000MB/s transfers
da3: 953869MB (1953525168 512 byte sectors: 255H 63S/T 121601C)
Mounting root from hammer2:serno/50026B7261032031.s2d
hammer2_mount: root 'serno/50026B7261032031.s2d'
hammer2_mount: dev="serno/50026B7261032031.s2d" label="ROOT" rdonly=1
hammer2: using volume header #0
hammer2_mount hmp=0xfffff800fd504000 pmp=0xfffff800f990c800
DMA space used: 12928k, remaining available: 197376k
Mounting devfs
da3: 300.000MB/s transfers
da3: 953869MB (1953525168 512 byte sectors: 255H 63S/T 121601C)
Mounting root from hammer2:serno/50026B7261032031.s2d
hammer2_mount: root 'serno/50026B7261032031.s2d'
hammer2_mount: dev="serno/50026B7261032031.s2d" label="ROOT" rdonly=1
hammer2: using volume header #0
hammer2_mount hmp=0xfffff800fd504000 pmp=0xfffff800f990c800
DMA space used: 12928k, remaining available: 197376k
Mounting devfs
hammer2_mount: '/dev/serno/50026B7261032031.s2d@ROOT'
hammer2_mount: dev="/dev/serno/50026B7261032031.s2d" label="ROOT" rdonly=1
hammer2 mount "serno/50026B7261032031.s2d": no recovery needed
HAMMER(ROOT) recovery check seqno=b6a9cd95
HAMMER(ROOT) recovery range 3000000015800b08-3000000015800b08
HAMMER(ROOT) recovery nexto 3000000015800b08 endseqno=b6a9cd96
HAMMER(ROOT) mounted clean, no recovery needed
hammer2_mount: '/dev/serno/WD-WCC2EP295836.s1d@LOCAL'
hammer2_mount: dev="/dev/serno/WD-WCC2EP295836.s1d" label="LOCAL" rdonly=0
hammer2: using volume header #2
hammer2 mount "/dev/serno/WD-WCC2EP295836.s1d": no recovery needed
hammer2_mount hmp=0xfffff8039d6ce000 pmp=0xfffff800f9912000
HAMMER(SEC-HDD) recovery check seqno=2cc37bf5
HAMMER(SEC-HDD) recovery range 300000001aab2108-300000001aab2108
HAMMER(SEC-HDD) recovery nexto 300000001aab2108 endseqno=2cc37bf6
HAMMER(SEC-HDD) mounted clean, no recovery needed
wlan0: driver didn't set altq_maxlen
wlan0: MAC address: [_MAC_XXXXXXXXXX]
tap0: MAC address: [_MAC_XXXXXXXXXX]
tap1: MAC address: [_MAC_XXXXXXXXXX]
tap2: MAC address: [_MAC_XXXXXXXXXX]
bridge0: MAC address: [_MAC_XXXXXXXXXX]
swap low/high-water marks set to 226222/339333