Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2020-01-01 21:53:59
From: uin
Description: Acer V3-112P-C9AX 10inch Baytrail laptop 2014
[1] ---<<BOOT>>--- [1] Copyright (c) 2013-2019 The HardenedBSD Project. [1] Copyright (c) 1992-2019 The FreeBSD Project. [1] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [1] The Regents of the University of California. All rights reserved. [1] FreeBSD is a registered trademark of The FreeBSD Foundation. [1] FreeBSD 12.1-STABLE-HBSD #0 : Wed Dec 25 00:29:08 UTC 2019 [1] root@updater-01:/usr/obj/usr/src/amd64.amd64/sys/HARDENEDBSD amd64 [1] FreeBSD clang version 8.0.1 (tags/RELEASE_801/final 366581) (based on LLVM 8.0.1) [1] VT(efifb): resolution 1366x768 [1] HardenedBSD: initialize and check features (__HardenedBSD_version 1200059 __FreeBSD_version 1201506). [1] module_register: cannot register mmc/mmcsd from kernel; already loaded from mmcsd.ko [1] Module mmc/mmcsd failed to register: 17 [1] module_register: cannot register cpu/coretemp from kernel; already loaded from coretemp.ko [1] Module cpu/coretemp failed to register: 17 [1] CPU: Intel(R) Celeron(R) CPU N2940 @ 1.83GHz (1833.38-MHz K8-class CPU) [1] Origin="GenuineIntel" Id=0x30678 Family=0x6 Model=0x37 Stepping=8 [1] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [1] Features2=0x41d8e3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,RDRAND> [1] AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> [1] AMD Features2=0x101<LAHF,Prefetch> [1] Structured Extended Features=0x2282<TSCADJ,SMEP,ERMS,NFPUSG> [1] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [1] TSC: P-state invariant, performance statistics [1] real memory = 8589934592 (8192 MB) [1] avail memory = 8123641856 (7747 MB) [1] Event timer "LAPIC" quality 600 [1] ACPI APIC Table: <ACRSYS ACRPRDCT> [1] WARNING: L1 data cache covers fewer APIC IDs than a core (0 < 1) [1] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [1] FreeBSD/SMP: 1 package(s) x 4 core(s) [1] random: unblocking device. [1] ioapic0: Changing APIC ID to 2 [1] ioapic0 <Version 2.0> irqs 0-86 on motherboard [1] Launching APs: 2 1 3 [1] Timecounter "TSC" frequency 1833378140 Hz quality 1000 [1] random: entropy device external interface [1] 000.000017 [4336] netmap_init netmap: loaded module [1] [ath_hal] loaded [1] module_register_init: MOD_LOAD (vesa, 0xffffffff810c46e0, 0) error 19 [1] random: registering fast source Intel Secure Key RNG [1] random: fast provider: "Intel Secure Key RNG" [1] kbd1 at kbdmux0 [1] nexus0 [1] efirtc0: <EFI Realtime Clock> on motherboard [1] efirtc0: registered as a time-of-day clock, resolution 1.000000s [1] cryptosoft0: <software crypto> on motherboard [1] aesni0: No AES or SHA support. [1] acpi0: <ACRSYS ACRPRDCT> on motherboard [1] acpi0: Power Button (fixed) [1] unknown: I/O range not supported [1] cpu0: <ACPI CPU> on acpi0 [1] atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0 [1] atrtc0: Warning: Couldn't map I/O. [1] atrtc0: registered as a time-of-day clock, resolution 1.000000s [1] Event timer "RTC" frequency 32768 Hz quality 0 [1] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 8 on acpi0 [1] Timecounter "HPET" frequency 14318180 Hz quality 950 [1] Event timer "HPET" frequency 14318180 Hz quality 450 [1] Event timer "HPET1" frequency 14318180 Hz quality 440 [1] Event timer "HPET2" frequency 14318180 Hz quality 440 [1] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [1] Timecounter "i8254" frequency 1193182 Hz quality 0 [1] Event timer "i8254" frequency 1193182 Hz quality 100 [1] Timecounter "ACPI-safe" frequency 3579545 Hz quality 850 [1] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [1] acpi_ec0: <Embedded Controller: GPE 0x18> port 0x62,0x66 on acpi0 [1] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [1] pcib0: Length mismatch for 3 range: 109fffff vs 10a00000 [1] pci0: <ACPI PCI bus> on pcib0 [1] vgapci0: <VGA-compatible display> port 0x2050-0x2057 mem 0x90000000-0x903fffff,0x80000000-0x8fffffff at device 2.0 on pci0 [1] vgapci0: Boot video device [1] ahci0: <AHCI SATA controller> port 0x2048-0x204f,0x205c-0x205f,0x2040-0x2047,0x2058-0x205b,0x2020-0x203f mem 0x9091e000-0x9091e7ff at device 19.0 on pci0 [1] ahci0: AHCI v1.30 with 2 3Gbps ports, Port Multiplier not supported [1] ahcich0: <AHCI channel> at channel 0 on ahci0 [1] xhci0: <Intel BayTrail USB 3.0 controller> mem 0x90900000-0x9090ffff at device 20.0 on pci0 [1] xhci0: 32 bytes context size, 64-bit DMA [1] xhci0: Port routing mask set to 0xffffffff [1] usbus0 on xhci0 [1] usbus0: 5.0Gbps Super Speed USB v3.0 [1] pci0: <encrypt/decrypt> at device 26.0 (no driver attached) [1] hdac0: <Intel BayTrail HDA Controller> mem 0x90910000-0x90913fff at device 27.0 on pci0 [1] pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0 [1] pcib1: [GIANT-LOCKED] [1] pcib2: <ACPI PCI-PCI bridge> at device 28.1 on pci0 [1] pcib2: [GIANT-LOCKED] [1] pci1: <ACPI PCI bus> on pcib2 [1] iwn0: <Intel Centrino Advanced-N + WiMAX 6250> mem 0x90600000-0x90601fff at device 0.0 on pci1 [1] pcib3: <ACPI PCI-PCI bridge> at device 28.2 on pci0 [1] pcib3: [GIANT-LOCKED] [1] pci2: <ACPI PCI bus> on pcib3 [1] re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0x1000-0x10ff mem 0x90500000-0x90500fff,0x90400000-0x90403fff at device 0.0 on pci2 [1] re0: Using 1 MSI-X message [1] re0: ASPM disabled [1] re0: Chip rev. 0x4c000000 [1] re0: MAC rev. 0x00000000 [1] miibus0: <MII bus> on re0 [1] rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0 [1] rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [1] re0: Using defaults for TSO: 65518/35/2048 [1] re0: Ethernet address: [_MAC_XXXXXXXXXX] [1] re0: netmap queues/slots: TX 1/256, RX 1/256 [1] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [1] isa0: <ISA bus> on isab0 [1] acpi_button0: <Power Button> on acpi0 [1] acpi_button1: <Sleep Button> on acpi0 [1] sdhci_acpi0: <Intel Bay Trail/Braswell eMMC 4.5/4.5.1 Controller> iomem 0x90a02000-0x90a02fff irq 44 on acpi0 [1] mmc0: <MMC/SD bus> on sdhci_acpi0 [1] sdhci_acpi1: <Intel Bay Trail/Braswell SDXC Controller> iomem 0x90a00000-0x90a00fff irq 47 on acpi0 [1] acpi_acad0: <AC Adapter> on acpi0 [1] battery0: <ACPI Control Method Battery> on acpi0 [1] acpi_lid0: <Control Method Lid Switch> on acpi0 [1] acpi_tz0: <Thermal Zone> on acpi0 [1] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 [1] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [1] kbd0 at atkbd0 [1] atkbd0: [GIANT-LOCKED] [1] psm0: <PS/2 Mouse> irq 12 on atkbdc0 [1] psm0: [GIANT-LOCKED] [1] psm0: model Generic PS/2 mouse, device ID 0 [1] uart0: <16550 or compatible> at port 0x3f8 irq 4 flags 0x10 on isa0 [1] coretemp0: <CPU On-Die Thermal Sensors> on cpu0 [1] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [1] ZFS filesystem version: 5 [1] ZFS storage pool version: features support (5000) [1] Timecounters tick every 1.000 msec [1] hdacc0: <Realtek ALC283 HDA CODEC> at cad 0 on hdac0 [1] hdaa0: <Realtek ALC283 Audio Function Group> at nid 1 on hdacc0 [1] pcm0: <Realtek ALC283 (Analog 2.0+HP/2.0)> at nid 20,33 and 18 on hdaa0 [1] hdacc1: <Intel (0x2882) HDA CODEC> at cad 2 on hdac0 [1] hdaa1: <Intel (0x2882) Audio Function Group> at nid 1 on hdacc1 [1] pcm1: <Intel (0x2882) (HDMI/DP 8ch)> at nid 4 on hdaa1 [1] ugen0.1: <0x8086 XHCI root HUB> at usbus0 [1] uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [1] mmc0: No compatible cards found on bus [1] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 ada0: <WDC WD10SPCX-21KHST0 01.01A01> ACS-2 ATA SATA 3.x device ada0: [_SERIAL_NUMBER_XXXXXXXXXXXX] ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) ada0: Command Queueing enabled ada0: 953869MB (1953525168 512 byte sectors) ada0: quirks=0x1<4K> [1] Trying to mount root from zfs:zroot/ROOT/1200059-7f55d []... [1] Root mount waiting for: usbus0 [1] uhub0: 7 ports with 7 removable, self powered [2] ugen0.2: <vendor 0x05e3 USB2.0 Hub> at usbus0 [2] uhub1 on uhub0 [2] uhub1: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/85.37, addr 1> on usbus0 [2] Root mount waiting for: usbus0 [3] uhub1: 4 ports with 3 removable, self powered [3] Root mount waiting for: usbus0 [3] ugen0.3: <Intel(R) Corporation Intel(R) Centrino(R) Advanced-N + WiMAX 6250> at usbus0 [4] ugen0.4: <vendor 0x04f3 Optical Mouse> at usbus0 [4] Root mount waiting for: usbus0 [5] ugen0.5: <ELAN Touchscreen> at usbus0 [5] Root mount waiting for: usbus0 [5] ugen0.6: <Chicony Electronics Co.,Ltd. HD WebCam> at usbus0 [20] wlan0: Ethernet address: [_MAC_XXXXXXXXXX] [21] lo0: link state changed to UP [21] re0: link state changed to DOWN [22] iwn0: iwn_read_firmware: ucode rev=0x291c0501 [23] wlan0: link state changed to UP [24] re0: link state changed to UP [27] ums0 on uhub1 [27] ums0: <vendor 0x04f3 Optical Mouse, class 0/0, rev 1.10/24.58, addr 3> on usbus0 [27] ums0: 3 buttons and [XYZ] coordinates ID=0 [27] wmt0 on uhub0 [27] wmt0: <ELAN Touchscreen, class 0/0, rev 2.00/10.12, addr 4> on usbus0 [27] wmt0: 10 contacts and [WH]. Report range [0:0] - [3264:1856] [92] pid 10680 (polkitd), jid 0, uid 565: exited on signal 11