Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.


Date: 2020-01-01 23:33:20
From: uin
Description: Toshiba Baytrail 10inch laptop 2014
[1] ---<<BOOT>>---
[1] Copyright (c) 2013-2019 The HardenedBSD Project.
[1] Copyright (c) 1992-2019 The FreeBSD Project.
[1] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
[1] 	The Regents of the University of California. All rights reserved.
[1] FreeBSD is a registered trademark of The FreeBSD Foundation.
[1] FreeBSD 12.1-STABLE-HBSD  HARDENEDBSD-12-STABLE amd64
[1] FreeBSD clang version 8.0.1 (tags/RELEASE_801/final 366581) (based on LLVM 8.0.1)
[1] VT(efifb): resolution 800x600
[1] HardenedBSD: initialize and check features (__HardenedBSD_version 1200059 __FreeBSD_version 1201500).
[1] module_register: cannot register cpu/coretemp from kernel; already loaded from coretemp.ko
[1] Module cpu/coretemp failed to register: 17
[1] CPU: Intel(R) Celeron(R) CPU  N2840  @ 2.16GHz (2166.72-MHz K8-class CPU)
[1]   Origin="GenuineIntel"  Id=0x30678  Family=0x6  Model=0x37  Stepping=8
[1]   Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
[1]   Features2=0x41d8e3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,RDRAND>
[1]   AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
[1]   AMD Features2=0x101<LAHF,Prefetch>
[1]   Structured Extended Features=0x2282<TSCADJ,SMEP,ERMS,NFPUSG>
[1]   VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
[1]   TSC: P-state invariant, performance statistics
[1] real memory  = 4294967296 (4096 MB)
[1] avail memory = 3975909376 (3791 MB)
[1] Event timer "LAPIC" quality 600
[1] ACPI APIC Table: <TOSASU TOSASU00>
[1] WARNING: L1 data cache covers fewer APIC IDs than a core (0 < 1)
[1] FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
[1] FreeBSD/SMP: 1 package(s) x 2 core(s)
[1] random: unblocking device.
[1] Firmware Warning (ACPI): 32/64X length mismatch in FADT/Gpe0Block: 128/32 (20190703/tbfadt-748)
[1] WARNING: Bogus Interrupt Trigger Mode. Assume CONFORMS.
[1] ioapic0 <Version 2.0> irqs 0-86 on motherboard
[1] Launching APs: 1
[1] Timecounter "TSC-low" frequency 1083359693 Hz quality 1000
[1] random: entropy device external interface
[1] 000.000017 [4336] netmap_init               netmap: loaded module
[1] [ath_hal] loaded
[1] module_register_init: MOD_LOAD (vesa, 0xffffffff810bab80, 0) error 19
[1] random: registering fast source Intel Secure Key RNG
[1] random: fast provider: "Intel Secure Key RNG"
[1] kbd1 at kbdmux0
[1] nexus0
[1] kernel trap 12 with interrupts disabled
[1] kernel trap 12 with interrupts disabled
[1] cryptosoft0: <software crypto> on motherboard
[1] aesni0: No AES or SHA support.
[1] acpi0: <TOSASU TOSASU00> on motherboard
[1] acpi0: Power Button (fixed)
[1] unknown: I/O range not supported
[1] cpu0: <ACPI CPU> on acpi0
[1] atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0
[1] atrtc0: Warning: Couldn't map I/O.
[1] atrtc0: registered as a time-of-day clock, resolution 1.000000s
[1] Event timer "RTC" frequency 32768 Hz quality 0
[1] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 8 on acpi0
[1] Timecounter "HPET" frequency 14318180 Hz quality 950
[1] Event timer "HPET" frequency 14318180 Hz quality 450
[1] Event timer "HPET1" frequency 14318180 Hz quality 440
[1] Event timer "HPET2" frequency 14318180 Hz quality 440
[1] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
[1] Timecounter "i8254" frequency 1193182 Hz quality 0
[1] Event timer "i8254" frequency 1193182 Hz quality 100
[1] Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
[1] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
[1] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
[1] pcib0: Length mismatch for 3 range: 10715fff vs 10716000
[1] pci0: <ACPI PCI bus> on pcib0
[1] vgapci0: <VGA-compatible display> port 0xf080-0xf087 mem 0xd0000000-0xd03fffff,0xc0000000-0xcfffffff at device 2.0 on pci0
[1] vgapci0: Boot video device
[1] ahci0: <AHCI SATA controller> port 0xf070-0xf077,0xf060-0xf063,0xf050-0xf057,0xf040-0xf043,0xf020-0xf03f mem 0xd0715000-0xd07157ff at device 19.0 on pci0
[1] ahci0: AHCI v1.30 with 2 1.5Gbps ports, Port Multiplier not supported
[1] ahcich0: <AHCI channel> at channel 0 on ahci0
[1] xhci0: <Intel BayTrail USB 3.0 controller> mem 0xd0700000-0xd070ffff at device 20.0 on pci0
[1] xhci0: 32 bytes context size, 64-bit DMA
[1] xhci0: Port routing mask set to 0xffffffff
[1] usbus0 on xhci0
[1] usbus0: 5.0Gbps Super Speed USB v3.0
[1] pci0: <encrypt/decrypt> at device 26.0 (no driver attached)
[1] hdac0: <Intel BayTrail HDA Controller> mem 0xd0710000-0xd0713fff at device 27.0 on pci0
[1] pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0
[1] pcib1: [GIANT-LOCKED]
[1] pcib2: <ACPI PCI-PCI bridge> at device 28.1 on pci0
[1] pcib2: [GIANT-LOCKED]
[1] pci1: <ACPI PCI bus> on pcib2
[1] pci1: <network> at device 0.0 (no driver attached)
[1] pcib3: <ACPI PCI-PCI bridge> at device 28.2 on pci0
[1] pcib3: [GIANT-LOCKED]
[1] isab0: <PCI-ISA bridge> at device 31.0 on pci0
[1] isa0: <ISA bus> on isab0
[1] acpi_lid0: <Control Method Lid Switch> on acpi0
[1] acpi_button0: <Power Button> on acpi0
[1] acpi_tz0: <Thermal Zone> on acpi0
[1] acpi_acad0: <AC Adapter> on acpi0
[1] battery0: <ACPI Control Method Battery> on acpi0
[1] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
[1] atkbd0: <AT Keyboard> irq 1 on atkbdc0
[1] kbd0 at atkbd0
[1] atkbd0: [GIANT-LOCKED]
[1] psm0: <PS/2 Mouse> irq 12 on atkbdc0
[1] psm0: [GIANT-LOCKED]
[1] psm0: model Generic PS/2 mouse, device ID 0
[1] coretemp0: <CPU On-Die Thermal Sensors> on cpu0
[1] est0: <Enhanced SpeedStep Frequency Control> on cpu0
[1] ZFS NOTICE: Prefetch is disabled by default if less than 4GB of RAM is present;
[1]             to enable, add "vfs.zfs.prefetch_disable=0" to /boot/loader.conf.
[1] ZFS filesystem version: 5
[1] ZFS storage pool version: features support (5000)
[1] Timecounters tick every 1.000 msec
[1] hdacc0: <Realtek ALC233 HDA CODEC> at cad 0 on hdac0
[1] hdaa0: <Realtek ALC233 Audio Function Group> at nid 1 on hdacc0
[1] pcm0: <Realtek ALC233 (Analog 2.0+HP/2.0)> at nid 20,33 and 25 on hdaa0
[1] pcm1: <Realtek ALC233 (Internal Analog Mic)> at nid 18 on hdaa0
[1] hdacc1: <Intel (0x2882) HDA CODEC> at cad 2 on hdac0
[1] hdaa1: <Intel (0x2882) Audio Function Group> at nid 1 on hdacc1
[1] pcm2: <Intel (0x2882) (HDMI/DP 8ch)> at nid 4 on hdaa1
[1] ugen0.1: <0x8086 XHCI root HUB> at usbus0
[1] uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
[1] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <HGST HTS545050A7E380 GG2OAH60> ATA8-ACS SATA 2.x device
ada0: [_SERIAL_NUMBER_XXXXXXXXXXXXXXXXX]
ada0: 150.000MB/s transfers (SATA 1.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 476940MB (976773168 512 byte sectors)
[1] Trying to mount root from zfs:toshiroot/ROOT/default []...
[1] Root mount waiting for: usbus0
[1] uhub0: 7 ports with 7 removable, self powered
[2] ugen0.2: <vendor 0x8087 product 0x0a2a> at usbus0
[2] Root mount waiting for: usbus0
[3] ugen0.3: <SunplusIT Inc TOSHIBA Web Camera - HD> at usbus0
[3] Root mount waiting for: usbus0
[3] ugen0.4: <vendor 0x058f USB2.0Hub> at usbus0
[3] uhub1 on uhub0
[3] uhub1: <vendor 0x058f USB2.0Hub, class 9/0, rev 2.00/1.00, addr 3> on usbus0
[4] Root mount waiting for: usbus0
[4] uhub1: 4 ports with 1 removable, self powered
[5] ugen0.5: <ITE Tech. Inc. ITE Device(8350)> at usbus0
[5] Root mount waiting for: usbus0
[5] ugen0.6: <Generic USB2.0-CRW> at usbus0
[6] Root mount waiting for: usbus0
[6] ugen0.7: <ELAN Touchscreen> at usbus0
[18] drmn0: <drmn> on vgapci0
[18] vgapci0: child drmn0 requested pci_enable_io
[18] vgapci0: child drmn0 requested pci_enable_io
[18] <5>[drm] Unable to create a private tmpfs mount, hugepage support will be disabled(-19).
[18] Successfully added WC MTRR for [0xc0000000-0xcfffffff]: 0; 
[18] <6>[drm] Got stolen memory base 0xbb000000, size 0x4000000
[18] <6>[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[18] <6>[drm] Driver supports precise vblank timestamp query.
[18] <6>[drm] Connector VGA-1: get mode from tunables:
[18] <6>[drm]   - kern.vt.fb.modes.VGA-1
[18] <6>[drm]   - kern.vt.fb.default_mode
[18] <6>[drm] Connector DP-1: get mode from tunables:
[18] <6>[drm]   - kern.vt.fb.modes.DP-1
[18] <6>[drm]   - kern.vt.fb.default_mode
[18] <6>[drm] Connector HDMI-A-1: get mode from tunables:
[18] <6>[drm]   - kern.vt.fb.modes.HDMI-A-1
[18] <6>[drm]   - kern.vt.fb.default_mode
[18] <6>[drm] Connector eDP-1: get mode from tunables:
[18] <6>[drm]   - kern.vt.fb.modes.eDP-1
[18] <6>[drm]   - kern.vt.fb.default_mode
[18] <6>[drm] Initialized i915 1.6.0 20171222 for drmn0 on minor 0
[18] VT: Replacing driver "efifb" with new "fb".
[18] start FB_INFO:
[18] type=11 height=768 width=1366 depth=32
[18] cmsize=16 size=4227072
[18] pbase=0xc0240000 vbase=0xfffff800c0240000
[18] name=drmn0 flags=0x0 stride=5504 bpp=32
[18] cmap[0]=0 cmap[1]=7f0000 cmap[2]=7f00 cmap[3]=c4a000
[18] end FB_INFO
[18] drmn0: fb0: inteldrmfb frame buffer device
[18] lo0: link state changed to UP
[22] iwm0: <Intel(R) Dual Band Wireless AC 3165> mem 0xd0600000-0xd0601fff at device 0.0 on pci1
[22] iwm0: hw rev 0x210, fw ver 22.361476.0, address [_MAC_XXXXXXXXXX]
[25] ubt0 on uhub0
[25] ubt0: <vendor 0x8087 product 0x0a2a, class 224/1, rev 2.00/0.01, addr 1> on usbus0
[25] uhid0 on uhub1
[25] uhid0: <ITE Tech. Inc. ITE Device(8350), class 0/0, rev 2.00/10.16, addr 4> on usbus0
[25] wmt0 on uhub1
[25] wmt0: <ELAN Touchscreen, class 0/0, rev 2.00/11.13, addr 6> on usbus0
[25] wmt0: 10 contacts and [WH]. Report range [0:0] - [3264:1856]
[26] WARNING: attempt to domain_add(bluetooth) after domainfinalize()
[27] WARNING: attempt to domain_add(netgraph) after domainfinalize()
[32] Security policy loaded: MAC/ntpd (mac_ntpd)
[42] pid 27002 (polkitd), jid 0, uid 565: exited on signal 11
[83] [HBSD INTERNAL] the process started with non-default hardening settings
[83]  -> fname: /usr/local/bin/python3.6 
[83]  -> pid: 36521 ppid: 84401 p_pax: 0x66a<NOPAGEEXEC,NOMPROTECT,NOSEGVGUARD,ASLR,NOSHLIBRANDOM,DISALLOWMAP32BIT> 
[151] wlan0: Ethernet address: [_MAC_XXXXXXXXXX]
[153] wlan0: link state changed to UP
[192] pid 14366 (polkitd), jid 0, uid 565: exited on signal 11
[198] [HBSD INTERNAL] the process started with non-default hardening settings
[198]  -> fname: /usr/local/bin/firefox 
[198]  -> pid: 36615 ppid: 66417 p_pax: 0x669<PAGEEXEC,NOMPROTECT,NOSEGVGUARD,ASLR,NOSHLIBRANDOM,DISALLOWMAP32BIT> 
[210] [HBSD INTERNAL] the process started with non-default hardening settings
[210]  -> fname: /usr/local/lib/firefox/firefox 
[210]  -> pid: 99100 ppid: 36615 p_pax: 0x669<PAGEEXEC,NOMPROTECT,NOSEGVGUARD,ASLR,NOSHLIBRANDOM,DISALLOWMAP32BIT> 
[210] [HBSD INTERNAL] the process started with non-default hardening settings
[210]  -> fname: /usr/local/lib/firefox/firefox 
[210]  -> pid: 4802 ppid: 36615 p_pax: 0x669<PAGEEXEC,NOMPROTECT,NOSEGVGUARD,ASLR,NOSHLIBRANDOM,DISALLOWMAP32BIT> 
[213] [HBSD INTERNAL] the process started with non-default hardening settings
[213]  -> fname: /usr/local/lib/firefox/firefox 
[213]  -> pid: 5298 ppid: 36615 p_pax: 0x669<PAGEEXEC,NOMPROTECT,NOSEGVGUARD,ASLR,NOSHLIBRANDOM,DISALLOWMAP32BIT> 
[221] [HBSD INTERNAL] the process started with non-default hardening settings
[221]  -> fname: /usr/local/lib/firefox/firefox 
[221]  -> pid: 18580 ppid: 36615 p_pax: 0x669<PAGEEXEC,NOMPROTECT,NOSEGVGUARD,ASLR,NOSHLIBRANDOM,DISALLOWMAP32BIT>