Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2020-01-02 01:04:37
From: uin
Description: ASUS X200M 10inch Baytrail laptop 2014
---<<BOOT>>--- [1] Copyright (c) 2013-2019 The HardenedBSD Project. [1] Copyright (c) 1992-2019 The FreeBSD Project. [1] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [1] The Regents of the University of California. All rights reserved. [1] FreeBSD is a registered trademark of The FreeBSD Foundation. [1] FreeBSD 12.0-STABLE-HBSD [STABLE:HardenedBSD-12-STABLE-v1200059.3] HARDENEDBSD-12-STABLE amd64 [1] FreeBSD clang version 8.0.1 (tags/RELEASE_801/final 366581) (based on LLVM 8.0.1) [1] VT(efifb): resolution 800x600 [1] HardenedBSD: initialize and check features (__HardenedBSD_version 1200059 __FreeBSD_version 1200514). [1] module_register: cannot register cpu/coretemp from kernel; already loaded from coretemp.ko [1] Module cpu/coretemp failed to register: 17 [1] CPU: Intel(R) Celeron(R) CPU N2830 @ 2.16GHz (2166.72-MHz K8-class CPU) [1] Origin="GenuineIntel" Id=0x30678 Family=0x6 Model=0x37 Stepping=8 [1] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [1] Features2=0x41d8e3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,RDRAND> [1] AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> [1] AMD Features2=0x101<LAHF,Prefetch> [1] Structured Extended Features=0x2282<TSCADJ,SMEP,ERMS,NFPUSG> [1] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [1] TSC: P-state invariant, performance statistics [1] real memory = 4294967296 (4096 MB) [1] avail memory = 3979071488 (3794 MB) [1] Event timer "LAPIC" quality 600 [1] ACPI APIC Table: <_ASUS_ Notebook> [1] WARNING: L1 data cache covers fewer APIC IDs than a core (0 < 1) [1] FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs [1] FreeBSD/SMP: 1 package(s) x 2 core(s) [1] random: unblocking device. [1] Firmware Warning (ACPI): 32/64X length mismatch in FADT/Gpe0Block: 128/32 (20181213/tbfadt-748) [1] WARNING: Bogus Interrupt Trigger Mode. Assume CONFORMS. [1] WARNING: Bogus Interrupt Polarity. Assume CONFORMS [1] ioapic0 <Version 2.0> irqs 0-86 on motherboard [1] Launching APs: 1 [1] Timecounter "TSC-low" frequency 1083360109 Hz quality 1000 [1] random: entropy device external interface [1] 000.000017 [4254] netmap_init netmap: loaded module [1] [ath_hal] loaded [1] module_register_init: MOD_LOAD (vesa, 0xffffffff810ac950, 0) error 19 [1] random: registering fast source Intel Secure Key RNG [1] random: fast provider: "Intel Secure Key RNG" [1] kbd1 at kbdmux0 [1] nexus0 [1] kernel trap 12 with interrupts disabled [1] kernel trap 12 with interrupts disabled [1] cryptosoft0: <software crypto> on motherboard [1] aesni0: No AES or SHA support. [1] acpi0: <_ASUS_ Notebook> on motherboard [1] acpi_ec_ecdt_probe: can't get handle [1] acpi0: Power Button (fixed) [1] unknown: I/O range not supported [1] cpu0: <ACPI CPU> on acpi0 [1] atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0 [1] atrtc0: Warning: Couldn't map I/O. [1] atrtc0: registered as a time-of-day clock, resolution 1.000000s [1] Event timer "RTC" frequency 32768 Hz quality 0 [1] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 8 on acpi0 [1] Timecounter "HPET" frequency 14318180 Hz quality 950 [1] Event timer "HPET" frequency 14318180 Hz quality 450 [1] Event timer "HPET1" frequency 14318180 Hz quality 440 [1] Event timer "HPET2" frequency 14318180 Hz quality 440 [1] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [1] Timecounter "i8254" frequency 1193182 Hz quality 0 [1] Event timer "i8254" frequency 1193182 Hz quality 100 [1] Timecounter "ACPI-safe" frequency 3579545 Hz quality 850 [1] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [1] acpi_ec0: <Embedded Controller: GPE 0x18> port 0x62,0x66 on acpi0 [1] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [1] pcib0: Length mismatch for 3 range: 10815fff vs 10816000 [1] pci0: <ACPI PCI bus> on pcib0 [1] vgapci0: <VGA-compatible display> port 0xf080-0xf087 mem 0xd0000000-0xd03fffff,0xc0000000-0xcfffffff at device 2.0 on pci0 [1] vgapci0: Boot video device [1] ahci0: <AHCI SATA controller> port 0xf070-0xf077,0xf060-0xf063,0xf050-0xf057,0xf040-0xf043,0xf020-0xf03f mem 0xd0815000-0xd08157ff at device 19.0 on pci0 [1] ahci0: AHCI v1.30 with 2 3Gbps ports, Port Multiplier not supported [1] ahcich0: <AHCI channel> at channel 0 on ahci0 [1] xhci0: <Intel BayTrail USB 3.0 controller> mem 0xd0800000-0xd080ffff at device 20.0 on pci0 [1] xhci0: 32 bytes context size, 64-bit DMA [1] xhci0: Port routing mask set to 0xffffffff [1] usbus0 on xhci0 [1] usbus0: 5.0Gbps Super Speed USB v3.0 [1] pci0: <encrypt/decrypt> at device 26.0 (no driver attached) [1] hdac0: <Intel BayTrail HDA Controller> mem 0xd0810000-0xd0813fff at device 27.0 on pci0 [1] pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0 [1] pci1: <ACPI PCI bus> on pcib1 [1] pcib2: <ACPI PCI-PCI bridge> at device 28.1 on pci0 [1] pci2: <ACPI PCI bus> on pcib2 [1] ath0: <Atheros AR9485> mem 0xd0700000-0xd077ffff at device 0.0 on pci2 [1] ar9300_flash_map: unimplemented for now [1] Restoring Cal data from DRAM [1] Restoring Cal data from EEPROM [1] Restoring Cal data from Flash [1] Restoring Cal data from Flash [1] Restoring Cal data from OTP [1] ar9300_hw_attach: ar9300_eeprom_attach returned 0 [1] ath0: [HT] enabling HT modes [1] ath0: [HT] enabling short-GI in 20MHz mode [1] ath0: [HT] 1 stream STBC receive enabled [1] ath0: [HT] 1 RX streams; 1 TX streams [1] ath0: AR9485 mac 576.1 RF5110 phy 0.0 [1] ath0: 2GHz radio: 0x0000; 5GHz radio: 0x0000 [1] pcib3: <ACPI PCI-PCI bridge> at device 28.3 on pci0 [1] pci3: <ACPI PCI bus> on pcib3 [1] pci3: <unknown> at device 0.0 (no driver attached) [1] re0: <RealTek 810xE PCIe 10/100baseTX> port 0xe000-0xe0ff mem 0xd0614000-0xd0614fff,0xd0610000-0xd0613fff at device 0.2 on pci3 [1] re0: Using 1 MSI-X message [1] re0: ASPM disabled [1] re0: Chip rev. 0x44000000 [1] re0: MAC rev. 0x00000000 [1] miibus0: <MII bus> on re0 [1] rlphy0: <RTL8201E 10/100 media interface> PHY 1 on miibus0 [1] rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow [1] re0: Using defaults for TSO: 65518/35/2048 [1] re0: Ethernet address: [_MAC_XXXXXXXXXX] [1] re0: netmap queues/slots: TX 1/256, RX 1/256 [1] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [1] isa0: <ISA bus> on isab0 [1] acpi_button0: <Power Button> on acpi0 [1] acpi_lid0: <Control Method Lid Switch> on acpi0 [1] acpi_button1: <Sleep Button> on acpi0 [1] acpi_tz0: <Thermal Zone> on acpi0 [1] acpi_acad0: <AC Adapter> on acpi0 [1] battery0: <ACPI Control Method Battery> on acpi0 [1] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 [1] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [1] kbd0 at atkbd0 [1] atkbd0: [GIANT-LOCKED] [1] psm0: <PS/2 Mouse> irq 12 on atkbdc0 [1] psm0: [GIANT-LOCKED] [1] psm0: model Generic PS/2 mouse, device ID 0 [1] uart0: <16550 or compatible> at port 0x3f8 irq 4 flags 0x10 on isa0 [1] coretemp0: <CPU On-Die Thermal Sensors> on cpu0 [1] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [1] ZFS NOTICE: Prefetch is disabled by default if less than 4GB of RAM is present; [1] to enable, add "vfs.zfs.prefetch_disable=0" to /boot/loader.conf. [1] ZFS filesystem version: 5 [1] ZFS storage pool version: features support (5000) [1] Timecounters tick every 1.000 msec [1] hdacc0: <Realtek ALC233 HDA CODEC> at cad 0 on hdac0 [1] hdaa0: <Realtek ALC233 Audio Function Group> at nid 1 on hdacc0 [1] pcm0: <Realtek ALC233 (Internal Analog)> at nid 20 and 27 on hdaa0 [1] pcm1: <Realtek ALC233 (Right Analog Headphones)> at nid 33 on hdaa0 [1] hdacc1: <Intel (0x2882) HDA CODEC> at cad 2 on hdac0 [1] hdaa1: <Intel (0x2882) Audio Function Group> at nid 1 on hdacc1 [1] pcm2: <Intel (0x2882) (HDMI/DP 8ch)> at nid 4 on hdaa1 [1] ugen0.1: <0x8086 XHCI root HUB> at usbus0 [1] uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [1] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 ada0: <Samsung SSD 860 QVO 1TB RVQ01B6Q> ACS-4 ATA SATA 3.x device ada0: [_SERIAL_NUMBER_XXXXXXXXXXXX] ada0: 150.000MB/s transfers (SATA 1.x, UDMA6, PIO 512bytes) ada0: Command Queueing enabled ada0: 953869MB (1953525168 512 byte sectors) [1] Trying to mount root from zfs:asusroot/ROOT/default []... [1] GEOM_ELI: Device ada0p4.eli created. [1] GEOM_ELI: Encryption: AES-XTS 256 [1] GEOM_ELI: Crypto: software [1] Root mount waiting for: usbus0 [1] uhub0: 7 ports with 7 removable, self powered [2] Root mount waiting for: usbus0 [2] ugen0.2: <USBest Technology SiS HID Touch Controller> at usbus0 [3] ugen0.3: <Chicony Electronics Co.,Ltd. USB2.0 HD UVC WebCam> at usbus0 [3] Root mount waiting for: usbus0 [3] ugen0.4: <vendor 0x05e3 USB2.0 Hub> at usbus0 [3] uhub1 on uhub0 [3] uhub1: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/85.37, addr 3> on usbus0 [4] Root mount waiting for: usbus0 [4] uhub1: 3 ports with 2 removable, self powered [5] GEOM_ELI: Device ada0p3.eli created. [5] GEOM_ELI: Encryption: AES-XTS 128 [5] GEOM_ELI: Crypto: software [7] drmn0: <drmn> on vgapci0 [7] vgapci0: child drmn0 requested pci_enable_io [7] vgapci0: child drmn0 requested pci_enable_io [7] <5>[drm] Unable to create a private tmpfs mount, hugepage support will be disabled(-19). [7] Successfully added WC MTRR for [0xc0000000-0xcfffffff]: 0; [7] <6>[drm] Got stolen memory base 0xbb000000, size 0x4000000 [7] <6>[drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [7] <6>[drm] Driver supports precise vblank timestamp query. [7] <6>[drm] Connector VGA-1: get mode from tunables: [7] <6>[drm] - kern.vt.fb.modes.VGA-1 [7] <6>[drm] - kern.vt.fb.default_mode [7] <6>[drm] Connector DP-1: get mode from tunables: [7] <6>[drm] - kern.vt.fb.modes.DP-1 [7] <6>[drm] - kern.vt.fb.default_mode [7] <6>[drm] Connector HDMI-A-1: get mode from tunables: [7] <6>[drm] - kern.vt.fb.modes.HDMI-A-1 [7] <6>[drm] - kern.vt.fb.default_mode [7] <6>[drm] Connector eDP-1: get mode from tunables: [7] <6>[drm] - kern.vt.fb.modes.eDP-1 [7] <6>[drm] - kern.vt.fb.default_mode [7] <6>[drm] Initialized i915 1.6.0 20171222 for drmn0 on minor 0 [7] VT: Replacing driver "efifb" with new "fb". [7] start FB_INFO: [7] type=11 height=768 width=1366 depth=32 [7] cmsize=16 size=4227072 [7] pbase=0xc0240000 vbase=0xfffff800c0240000 [7] name=drmn0 flags=0x0 stride=5504 bpp=32 [7] cmap[0]=0 cmap[1]=7f0000 cmap[2]=7f00 cmap[3]=c4a000 [7] end FB_INFO [7] drmn0: fb0: inteldrmfb frame buffer device [9] wlan0: Ethernet address: [_MAC_XXXXXXXXXX] [9] lo0: link state changed to UP [9] re0: link state changed to DOWN [12] wlan0: link state changed to UP [14] wmt0 on uhub0 [14] wmt0: <USBest Technology SiS HID Touch Controller, class 0/0, rev 2.00/1.01, addr 1> on usbus0 [14] wmt0: 10 contacts and []. Report range [0:0] - [4095:4095] [41] pid 28211 (polkitd), jid 0, uid 565: exited on signal 11 [69] pid 6411 (polkitd), jid 0, uid 565: exited on signal 11 [70] [HBSD INTERNAL] the process started with non-default hardening settings [70] -> fname: /usr/local/bin/python3.6 [70] -> pid: 48297 ppid: 84402 p_pax: 0x66a<NOPAGEEXEC,NOMPROTECT,NOSEGVGUARD,ASLR,NOSHLIBRANDOM,DISALLOWMAP32BIT> [96] pid 57615 (polkitd), jid 0, uid 565: exited on signal 11 [121] pid 2822 (polkitd), jid 0, uid 565: exited on signal 11 [146] pid 84225 (polkitd), jid 0, uid 565: exited on signal 11 [247] pid 39840 (polkitd), jid 0, uid 565: exited on signal 11