Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2020-01-26 19:49:18
From: complex
Description: Lenovo ThinkCentre M625q Tiny FreeBSD 13.0-CURRENT
---<<BOOT>>---
Copyright (c) 1992-2020 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 13.0-CURRENT #0 r356767: Thu Jan 16 04:52:44 UTC 2020
[_EMAIL_XXXXXXXXXXXXXXXXXXX]:/usr/obj/usr/src/amd64.amd64/sys/GENERIC amd64
FreeBSD clang version 9.0.1 ([_EMAIL_XXXXX]:llvm/llvm-project.git c1a0a213378a458fbea1a5c77b315c7dce08fd05) (based on LLVM 9.0.1)
WARNING: WITNESS option enabled, expect reduced performance.
VT(efifb): resolution 3840x2160
CPU: AMD E2-9000e RADEON R2, 4 COMPUTE CORES 2C+2G (1497.22-MHz K8-class CPU)
Origin="AuthenticAMD" Id=0x670f00 Family=0x15 Model=0x70 Stepping=0
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
Features2=0x7ed8320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM>
AMD Features2=0x2febbfff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,XOP,SKINIT,WDT,LWP,FMA4,TCE,NodeId,TBM,Topology,PCXC,PNXC,<b25>,DBE,PTSC,MWAITX>
Structured Extended Features=0x1a9<FSGSBASE,BMI1,AVX2,SMEP,BMI2>
XSAVE Features=0x1<XSAVEOPT>
AMD Extended Feature Extensions ID EBX=0x1000<IBPB>
SVM: NP,NRIP,VClean,AFlush,DAssist,NAsids=32768
TSC: P-state invariant, performance statistics
real memory = 4294967296 (4096 MB)
avail memory = 3519836160 (3356 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <LENOVO TC-M1W >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
arc4random: WARNING: initial seeding bypassed the cryptographic random device because it was not yet seeded and the knob 'bypass_before_seeding' was enabled.
Firmware Warning (ACPI): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20200110/tbfadt-796)
ioapic0 <Version 2.1> irqs 0-23
ioapic1 <Version 2.1> irqs 24-55
Launching APs: 1
Timecounter "TSC" frequency 1497221789 Hz quality 1000
random: entropy device external interface
WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 13.0.
kbd1 at kbdmux0
000.000045 [4336] netmap_init netmap: loaded module
[ath_hal] loaded
nexus0
efirtc0: <EFI Realtime Clock>
efirtc0: registered as a time-of-day clock, resolution 1.000000s
cryptosoft0: <software crypto>
acpi0: <LENOVO TC-M1W>
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
Event timer "HPET1" frequency 14318180 Hz quality 450
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <base peripheral, IOMMU> at device 0.2 (no driver attached)
vgapci0: <VGA-compatible display> port 0xf000-0xf0ff mem 0xe0000000-0xefffffff,0xf0000000-0xf07fffff,0xfeb00000-0xfeb3ffff irq 30 at device 1.0 on pci0
vgapci0: Boot video device
hdac0: <ATI (0x15b3) HDA Controller> mem 0xfeb64000-0xfeb67fff irq 31 at device 1.1 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 2.3 on pci0
pci1: <ACPI PCI bus> on pcib1
re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xe000-0xe0ff mem 0xfea04000-0xfea04fff,0xfea00000-0xfea03fff irq 40 at device 0.0 on pci1
re0: Using 1 MSI-X message
re0: ASPM disabled
re0: Chip rev. 0x54000000
re0: MAC rev. 0x00100000
miibus0: <MII bus> on re0
rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0
rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re0: Using defaults for TSO: 65518/35/2048
re0: Ethernet address: [_MAC_XXXXXXXXXX]
re0: netmap queues/slots: TX 1/256, RX 1/256
pci0: <encrypt/decrypt> at device 8.0 (no driver attached)
hdac1: <AMD (0x157a) HDA Controller> mem 0xfeb60000-0xfeb63fff at device 9.2 on pci0
xhci0: <XHCI (generic) USB 3.0 controller> mem 0xfeb68000-0xfeb69fff irq 18 at device 16.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
xhci0: Unable to map MSI-X table
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
ahci0: <AMD KERNCZ AHCI SATA controller> port 0xf140-0xf147,0xf130-0xf133,0xf120-0xf127,0xf110-0xf113,0xf100-0xf10f mem 0xfeb6d000-0xfeb6d3ff irq 19 at device 17.0 on pci0
ahci0: AHCI v1.30 with 1 6Gbps ports, Port Multiplier supported with FBS
ahcich1: <AHCI channel> at channel 1 on ahci0
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfeb6c000-0xfeb6c0ff irq 18 at device 18.0 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci0
usbus1: 480Mbps High Speed USB v2.0
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
acpi_button0: <Power Button> on acpi0
orm0: <ISA Option ROM> at iomem 0xd0000-0xd0fff pnpid ORM0000 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 12.
hwpstate0: <Cool`n'Quiet 2.0> on cpu0
Timecounters tick every 1.000 msec
Obsolete code will be removed soon: random(9) is the obsolete Park-Miller LCG from 1988
hdacc0: <ATI R6xx HDA CODEC> at cad 0 on hdac0
hdaa0: <ATI R6xx Audio Function Group> at nid 1 on hdacc0
pcm0: <ATI R6xx (HDMI)> at nid 3 on hdaa0
pcm1: <ATI R6xx (HDMI)> at nid 5 on hdaa0
hdacc1: <Realtek ALC235 HDA CODEC> at cad 0 on hdac1
hdaa1: <Realtek ALC235 Audio Function Group> at nid 1 on hdacc1
pcm2: <Realtek ALC235 (Analog 2.0+HP/2.0)> at nid 20,33 and 25 on hdaa1
pcm3: <Realtek ALC235 (Front Analog Mic)> at nid 26 on hdaa1
WARNING: WITNESS option enabled, expect reduced performance.
ugen1.1: <AMD EHCI root HUB> at usbus1
ugen0.1: <0x1022 XHCI root HUB> at usbus0
uhub0 on usbus1
uhub1 on usbus0
uhub0: <AMD EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
uhub1: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
Trying to mount root from cd9660:/dev/iso9660/13_0_CURRENT_AMD64_CD [ro]...
Root mount waiting for: usbus0 CAM usbus1
ada0 at ahcich1 bus 0 scbus0 target 0 lun 0
ada0: <UMIS-RTFMB032RFM1EWLX R2002> ACS-2 ATA SATA 3.x device
ada0: [_SERIAL_NUMBER_XXXXXXXXXXXXXXXXX]
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 30533MB (62533296 512 byte sectors)
uhub1: 8 ports with 6 removable, self powered
uhub0: 2 ports with 2 removable, self powered
Root mount waiting for: usbus0 usbus1
ugen0.2: <ELMCU iPazzPort> at usbus0
ukbd0 on uhub1
ukbd0: <ELMCU iPazzPort, class 0/0, rev 1.10/0.01, addr 1> on usbus0
kbd2 at ukbd0
ugen1.2: <vendor 0x0438 product 0x7900> at usbus1
uhub2 on uhub0
uhub2: <vendor 0x0438 product 0x7900, class 9/0, rev 2.00/0.18, addr 2> on usbus1
uhub2: 4 ports with 4 removable, self powered
Root mount waiting for: usbus1
ugen1.3: <Initio INIC-3609> at usbus1
umass0 on uhub2
umass0: <Initio INIC-3609, class 0/0, rev 2.10/4.02, addr 3> on usbus1
umass0: 8070i (ATAPI) over Bulk-Only; quirks = 0x4000
umass0:1:0: Attached to scbus1
cd0 at umass-sim0 bus 0 scbus1 target 0 lun 0
cd0: <TSSTcorp DVDWBD SN-406AB AS02> Removable CD-ROM SCSI device
cd0: 40.000MB/s transfers
cd0: 889MB (455248 2048 byte sectors)
cd0: quirks=0x10<10_BYTE_ONLY>
mountroot: waiting for device /dev/iso9660/13_0_CURRENT_AMD64_CD...
random: unblocking device.
lo0: link state changed to UP
re0: link state changed to UP
intsmb0: <AMD FCH SMBus Controller> at device 20.0 on pci0
smbus0: <System Management Bus> on intsmb0
ums0 on uhub1
ums0: <ELMCU iPazzPort, class 0/0, rev 1.10/0.01, addr 1> on usbus0
ums0: 5 buttons and [XYZ] coordinates ID=1