Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2020-02-03 04:16:55
From: despair
Description: FreeBSD/amd64 on Joyent SmartDC HVM
---<<BOOT>>--- Copyright (c) 1992-2019 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 12.1-RELEASE r354233 GENERIC amd64 FreeBSD clang version 8.0.1 (tags/RELEASE_801/final 366581) (based on LLVM 8.0.1) VT(efifb): resolution 1024x768 CPU: AMD Opteron(tm) Processor 6386 SE (2799.99-MHz K8-class CPU) Origin="AuthenticAMD" Id=0x600f20 Family=0x15 Model=0x2 Stepping=0 Features=0x1783fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE,SSE2,HTT> Features2=0xbe983203<SSE3,PCLMULQDQ,SSSE3,FMA,CX16,SSE4.1,SSE4.2,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C,HV> AMD Features=0x24500800<SYSCALL,NX,MMX+,Page1GB,LM> AMD Features2=0x6139fb<LAHF,CMP,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,XOP,SKINIT,WDT,FMA4,TBM,Topology> Structured Extended Features=0x8<BMI1> Hypervisor: Origin = "bhyve bhyve " real memory = 68717379584 (65534 MB) avail memory = 8274108416 (7890 MB) Event timer "LAPIC" quality 600 ACPI APIC Table: <BHYVE BVMADT > FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs FreeBSD/SMP: 4 package(s) x 1 core(s) random: unblocking device. ioapic0: Changing APIC ID to 4 MADT: Forcing active-low polarity and level trigger for SCI ioapic0 <Version 1.1> irqs 0-31 on motherboard Launching APs: 1 2 3 random: entropy device external interface kbd1 at kbdmux0 000.000023 [4335] netmap_init netmap: loaded module [ath_hal] loaded module_register_init: MOD_LOAD (vesa, 0xffffffff8112e050, 0) error 19 nexus0 efirtc0: <EFI Realtime Clock> on motherboard efirtc0: registered as a time-of-day clock, resolution 1.000000s cryptosoft0: <software crypto> on motherboard acpi0: <BHYVE BVFACP> on motherboard acpi0: Power Button (fixed) atrtc0: <AT realtime clock> port 0x70-0x71,0x72-0x77 irq 8 on acpi0 atrtc0: registered as a time-of-day clock, resolution 1.000000s Event timer "RTC" frequency 32768 Hz quality 0 attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 16777216 Hz quality 950 Event timer "HPET" frequency 16777216 Hz quality 550 Event timer "HPET1" frequency 16777216 Hz quality 450 Event timer "HPET2" frequency 16777216 Hz quality 450 Event timer "HPET3" frequency 16777216 Hz quality 450 Event timer "HPET4" frequency 16777216 Hz quality 450 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <32-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib0: no PRT entry for 0.4.INTB pcib0: no PRT entry for 0.30.INTA virtio_pci0: <VirtIO PCI Block adapter> port 0x2000-0x203f mem 0xc0000000-0xc0001fff irq 17 at device 4.0 on pci0 vtblk0: <VirtIO Block Adapter> on virtio_pci0 vtblk0: 40960MB (83886080 512 byte sectors) virtio_pci1: <VirtIO PCI Block adapter> port 0x2040-0x207f mem 0xc0002000-0xc0003fff irq 6 at device 4.1 on pci0 vtblk1: <VirtIO Block Adapter> on virtio_pci1 vtblk1: 163840MB (335544320 512 byte sectors) virtio_pci2: <VirtIO PCI Network adapter> port 0x2080-0x209f mem 0xc0004000-0xc0005fff irq 19 at device 6.0 on pci0 vtnet0: <VirtIO Networking Adapter> on virtio_pci2 vtnet0: Ethernet address: [_MAC_XXXXXXXXXX] vtnet0: netmap queues/slots: TX 1/1024, RX 1/512 000.001486 [ 503] vtnet_netmap_attach vtnet attached txq=1, txd=1024 rxq=1, rxd=512 vgapci0: <VGA-compatible display> mem 0xc0006000-0xc000607f,0xc1000000-0xc1ffffff at device 30.0 on pci0 vgapci0: Boot video device xhci0: <Intel Panther Point USB 3.0 controller> mem 0xc2000000-0xc2000fff irq 7 at device 30.1 on pci0 xhci0: 32 bytes context size, 32-bit DMA xhci0: Port routing mask set to 0xffffffff usbus0 on xhci0 usbus0: 5.0Gbps Super Speed USB v3.0 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model Generic PS/2 mouse, device ID 0 uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 uart0: console (115200,n,8,1) uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 vga0: <Generic ISA VGA> at port 0x3b0-0x3bb iomem 0xb0000-0xb7fff pnpid PNP0900 on isa0 Timecounters tick every 10.000 msec Trying to mount root from ufs:/dev/vtbd0p2 [rw]... ugen0.1: <0x8086 XHCI root HUB> at usbus0 uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 uhub0: 8 ports with 8 removable, self powered lo0: link state changed to UP ugen0.2: <BHYVE HID Tablet> at usbus0 vtnet0: link state changed to UP ums0 on uhub0 ums0: <BHYVE HID Tablet, class 0/0, rev 3.00/0.00, addr 1> on usbus0 ums0: 3 buttons and [Z] coordinates ID=0 Waiting (max 60 seconds) for system process `vnlru' to stop... done Waiting (max 60 seconds) for system process `syncer' to stop... Syncing disks, vnodes remaining... 4 2 0 done Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done Waiting (max 60 seconds) for system thread `bufspacedaemon-1' to stop... done Waiting (max 60 seconds) for system thread `bufspacedaemon-2' to stop... done Waiting (max 60 seconds) for system thread `bufspacedaemon-3' to stop... done All buffers synced. Uptime: 1h28m56s ums0: detached ---<<BOOT>>--- Copyright (c) 1992-2019 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 12.1-RELEASE r354233 GENERIC amd64 FreeBSD clang version 8.0.1 (tags/RELEASE_801/final 366581) (based on LLVM 8.0.1) VT(efifb): resolution 1024x768 CPU: AMD Opteron(tm) Processor 6386 SE (2800.00-MHz K8-class CPU) Origin="AuthenticAMD" Id=0x600f20 Family=0x15 Model=0x2 Stepping=0 Features=0x1783fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE,SSE2,HTT> Features2=0xbe983203<SSE3,PCLMULQDQ,SSSE3,FMA,CX16,SSE4.1,SSE4.2,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C,HV> AMD Features=0x24500800<SYSCALL,NX,MMX+,Page1GB,LM> AMD Features2=0x6139fb<LAHF,CMP,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,XOP,SKINIT,WDT,FMA4,TBM,Topology> Structured Extended Features=0x8<BMI1> Hypervisor: Origin = "bhyve bhyve " real memory = 68717379584 (65534 MB) avail memory = 8274108416 (7890 MB) Event timer "LAPIC" quality 600 ACPI APIC Table: <BHYVE BVMADT > FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs FreeBSD/SMP: 4 package(s) x 1 core(s) random: unblocking device. ioapic0: Changing APIC ID to 4 MADT: Forcing active-low polarity and level trigger for SCI ioapic0 <Version 1.1> irqs 0-31 on motherboard Launching APs: 3 2 1 random: entropy device external interface kbd1 at kbdmux0 000.000023 [4335] netmap_init netmap: loaded module [ath_hal] loaded module_register_init: MOD_LOAD (vesa, 0xffffffff8112e050, 0) error 19 nexus0 efirtc0: <EFI Realtime Clock> on motherboard efirtc0: registered as a time-of-day clock, resolution 1.000000s cryptosoft0: <software crypto> on motherboard acpi0: <BHYVE BVFACP> on motherboard acpi0: Power Button (fixed) atrtc0: <AT realtime clock> port 0x70-0x71,0x72-0x77 irq 8 on acpi0 atrtc0: registered as a time-of-day clock, resolution 1.000000s Event timer "RTC" frequency 32768 Hz quality 0 attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 16777216 Hz quality 950 Event timer "HPET" frequency 16777216 Hz quality 550 Event timer "HPET1" frequency 16777216 Hz quality 450 Event timer "HPET2" frequency 16777216 Hz quality 450 Event timer "HPET3" frequency 16777216 Hz quality 450 Event timer "HPET4" frequency 16777216 Hz quality 450 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <32-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib0: no PRT entry for 0.4.INTB pcib0: no PRT entry for 0.30.INTA virtio_pci0: <VirtIO PCI Block adapter> port 0x2000-0x203f mem 0xc0000000-0xc0001fff irq 17 at device 4.0 on pci0 vtblk0: <VirtIO Block Adapter> on virtio_pci0 vtblk0: 40960MB (83886080 512 byte sectors) virtio_pci1: <VirtIO PCI Block adapter> port 0x2040-0x207f mem 0xc0002000-0xc0003fff irq 6 at device 4.1 on pci0 vtblk1: <VirtIO Block Adapter> on virtio_pci1 vtblk1: 163840MB (335544320 512 byte sectors) virtio_pci2: <VirtIO PCI Network adapter> port 0x2080-0x209f mem 0xc0004000-0xc0005fff irq 19 at device 6.0 on pci0 vtnet0: <VirtIO Networking Adapter> on virtio_pci2 vtnet0: Ethernet address: [_MAC_XXXXXXXXXX] vtnet0: netmap queues/slots: TX 1/1024, RX 1/512 000.001486 [ 503] vtnet_netmap_attach vtnet attached txq=1, txd=1024 rxq=1, rxd=512 vgapci0: <VGA-compatible display> mem 0xc0006000-0xc000607f,0xc1000000-0xc1ffffff at device 30.0 on pci0 vgapci0: Boot video device xhci0: <Intel Panther Point USB 3.0 controller> mem 0xc2000000-0xc2000fff irq 7 at device 30.1 on pci0 xhci0: 32 bytes context size, 32-bit DMA xhci0: Port routing mask set to 0xffffffff usbus0 on xhci0 usbus0: 5.0Gbps Super Speed USB v3.0 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model Generic PS/2 mouse, device ID 0 uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 uart0: console (115200,n,8,1) uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 vga0: <Generic ISA VGA> at port 0x3b0-0x3bb iomem 0xb0000-0xb7fff pnpid PNP0900 on isa0 Timecounters tick every 10.000 msec Trying to mount root from ufs:/dev/vtbd0p2 [rw]... ugen0.1: <0x8086 XHCI root HUB> at usbus0 uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 uhub0: 8 ports with 8 removable, self powered ugen0.2: <BHYVE HID Tablet> at usbus0 lo0: link state changed to UP vtnet0: link state changed to UP ums0 on uhub0 ums0: <BHYVE HID Tablet, class 0/0, rev 3.00/0.00, addr 1> on usbus0 ums0: 3 buttons and [Z] coordinates ID=0 Waiting (max 60 seconds) for system process `vnlru' to stop... done Waiting (max 60 seconds) for system process `syncer' to stop... Syncing disks, vnodes remaining... 2 0 0 done Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done Waiting (max 60 seconds) for system thread `bufspacedaemon-1' to stop... done Waiting (max 60 seconds) for system thread `bufspacedaemon-2' to stop... done Waiting (max 60 seconds) for system thread `bufspacedaemon-3' to stop... done All buffers synced. Uptime: 13m2s ums0: detached ---<<BOOT>>--- Copyright (c) 1992-2019 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 12.1-RELEASE r354233 GENERIC amd64 FreeBSD clang version 8.0.1 (tags/RELEASE_801/final 366581) (based on LLVM 8.0.1) VT(efifb): resolution 1024x768 CPU: AMD Opteron(tm) Processor 6386 SE (2800.01-MHz K8-class CPU) Origin="AuthenticAMD" Id=0x600f20 Family=0x15 Model=0x2 Stepping=0 Features=0x1783fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE,SSE2,HTT> Features2=0xbe983203<SSE3,PCLMULQDQ,SSSE3,FMA,CX16,SSE4.1,SSE4.2,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C,HV> AMD Features=0x24500800<SYSCALL,NX,MMX+,Page1GB,LM> AMD Features2=0x6139fb<LAHF,CMP,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,XOP,SKINIT,WDT,FMA4,TBM,Topology> Structured Extended Features=0x8<BMI1> Hypervisor: Origin = "bhyve bhyve " real memory = 68717379584 (65534 MB) avail memory = 8274108416 (7890 MB) Event timer "LAPIC" quality 600 ACPI APIC Table: <BHYVE BVMADT > FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs FreeBSD/SMP: 4 package(s) x 1 core(s) random: unblocking device. ioapic0: Changing APIC ID to 4 MADT: Forcing active-low polarity and level trigger for SCI ioapic0 <Version 1.1> irqs 0-31 on motherboard Launching APs: 2 3 1 random: entropy device external interface kbd1 at kbdmux0 000.000023 [4335] netmap_init netmap: loaded module [ath_hal] loaded module_register_init: MOD_LOAD (vesa, 0xffffffff8112e050, 0) error 19 nexus0 efirtc0: <EFI Realtime Clock> on motherboard efirtc0: registered as a time-of-day clock, resolution 1.000000s cryptosoft0: <software crypto> on motherboard acpi0: <BHYVE BVFACP> on motherboard acpi0: Power Button (fixed) atrtc0: <AT realtime clock> port 0x70-0x71,0x72-0x77 irq 8 on acpi0 atrtc0: registered as a time-of-day clock, resolution 1.000000s Event timer "RTC" frequency 32768 Hz quality 0 attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 16777216 Hz quality 950 Event timer "HPET" frequency 16777216 Hz quality 550 Event timer "HPET1" frequency 16777216 Hz quality 450 Event timer "HPET2" frequency 16777216 Hz quality 450 Event timer "HPET3" frequency 16777216 Hz quality 450 Event timer "HPET4" frequency 16777216 Hz quality 450 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <32-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib0: no PRT entry for 0.4.INTB pcib0: no PRT entry for 0.30.INTA virtio_pci0: <VirtIO PCI Block adapter> port 0x2000-0x203f mem 0xc0000000-0xc0001fff irq 17 at device 4.0 on pci0 vtblk0: <VirtIO Block Adapter> on virtio_pci0 vtblk0: 40960MB (83886080 512 byte sectors) virtio_pci1: <VirtIO PCI Block adapter> port 0x2040-0x207f mem 0xc0002000-0xc0003fff irq 6 at device 4.1 on pci0 vtblk1: <VirtIO Block Adapter> on virtio_pci1 vtblk1: 163840MB (335544320 512 byte sectors) virtio_pci2: <VirtIO PCI Network adapter> port 0x2080-0x209f mem 0xc0004000-0xc0005fff irq 19 at device 6.0 on pci0 vtnet0: <VirtIO Networking Adapter> on virtio_pci2 vtnet0: Ethernet address: [_MAC_XXXXXXXXXX] vtnet0: netmap queues/slots: TX 1/1024, RX 1/512 000.001486 [ 503] vtnet_netmap_attach vtnet attached txq=1, txd=1024 rxq=1, rxd=512 vgapci0: <VGA-compatible display> mem 0xc0006000-0xc000607f,0xc1000000-0xc1ffffff at device 30.0 on pci0 vgapci0: Boot video device xhci0: <Intel Panther Point USB 3.0 controller> mem 0xc2000000-0xc2000fff irq 7 at device 30.1 on pci0 xhci0: 32 bytes context size, 32-bit DMA xhci0: Port routing mask set to 0xffffffff usbus0 on xhci0 usbus0: 5.0Gbps Super Speed USB v3.0 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model Generic PS/2 mouse, device ID 0 uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 uart0: console (115200,n,8,1) uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 vga0: <Generic ISA VGA> at port 0x3b0-0x3bb iomem 0xb0000-0xb7fff pnpid PNP0900 on isa0 Timecounters tick every 10.000 msec Trying to mount root from ufs:/dev/vtbd0p2 [rw]... ugen0.1: <0x8086 XHCI root HUB> at usbus0 uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 uhub0: 8 ports with 8 removable, self powered lo0: link state changed to UP ugen0.2: <BHYVE HID Tablet> at usbus0 vtnet0: link state changed to UP ums0 on uhub0 ums0: <BHYVE HID Tablet, class 0/0, rev 3.00/0.00, addr 1> on usbus0 ums0: 3 buttons and [Z] coordinates ID=0