Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2020-02-08 15:15:29
From: [tj]
Description: NanoPi R2S
---<<BOOT>>---
KDB: debugger backends: ddb
KDB: current backend: ddb
Copyright (c) 1992-2020 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 13.0-CURRENT #98 r357147:357497M: Fri Feb 7 14:30:10 +08 2020
[_EMAIL_XXXXXXXXXXXXXXXX]:/usr/obj/usr/src/arm64.aarch64/sys/GENERIC arm64
FreeBSD clang version 9.0.0 (tags/RELEASE_900/final 372316) (based on LLVM 9.0.0)
WARNING: WITNESS option enabled, expect reduced performance.
VT: init without driver.
module firmware already present!
KLD file umodem.ko is missing dependencies
Starting CPU 1 (1)
Starting CPU 2 (2)
Starting CPU 3 (3)
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
random: unblocking device.
random: entropy device external interface
MAP 3cefc000 mode 2 pages 1
MAP 3ffa4000 mode 2 pages 1
WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 13.0.
kbd0 at kbdmux0
WARNING: Device "openfirm" is Giant locked and may be deleted before FreeBSD 13.0.
ofwbus0: <Open Firmware Device Tree>
simplebus0: <Flattened device tree simple bus> on ofwbus0
clk_fixed0: <Fixed clock> on ofwbus0
rk_grf0: <RockChip General Register Files> mem 0xff100000-0xff100fff on ofwbus0
rk3328_cru0: <Rockchip RK3328 Clock and Reset Unit> mem 0xff440000-0xff440fff on ofwbus0
rk3328_cru0: cannot get parent at idx 6
Cannot set frequency for clk: aclk_bus_pre, error: 34
rk3328_cru0: Failed to set aclk_bus_pre to a frequency of 15000000
Cannot set frequency for clk: aclk_peri_pre, error: 34
rk3328_cru0: Failed to set aclk_peri_pre to a frequency of 15000000
clk_fixed1: <Fixed clock> on ofwbus0
regfix0: <Fixed Regulator> on ofwbus0
regfix1: <Fixed Regulator> on ofwbus0
regfix2: <Fixed Regulator> on ofwbus0
regfix3: <Fixed Regulator> on ofwbus0
simple_mfd0: <Simple MFD (Multi-Functions Device)> mem 0xff450000-0xff45ffff on ofwbus0
psci0: <ARM Power State Co-ordination Interface Driver> on ofwbus0
gic0: <ARM Generic Interrupt Controller> mem 0xff811000-0xff811fff,0xff812000-0xff813fff,0xff814000-0xff815fff,0xff816000-0xff817fff irq 50 on ofwbus0
gic0: pn 0x2, arch 0x2, rev 0x1, implementer 0x43b irqs 160
rk_pinctrl0: <RockChip Pinctrl controller> on ofwbus0
gpio0: <RockChip GPIO Bank controller> mem 0xff210000-0xff2100ff irq 53 on rk_pinctrl0
gpiobus0: <OFW GPIO bus> on gpio0
gpio1: <RockChip GPIO Bank controller> mem 0xff220000-0xff2200ff irq 54 on rk_pinctrl0
gpiobus1: <OFW GPIO bus> on gpio1
gpio2: <RockChip GPIO Bank controller> mem 0xff230000-0xff2300ff irq 55 on rk_pinctrl0
gpiobus2: <OFW GPIO bus> on gpio2
gpio3: <RockChip GPIO Bank controller> mem 0xff240000-0xff2400ff irq 56 on rk_pinctrl0
gpiobus3: <OFW GPIO bus> on gpio3
rk_i2c0: <RockChip I2C> mem 0xff160000-0xff160fff irq 16 on ofwbus0
iicbus0: <OFW I2C bus> on rk_i2c0
rk805_pmu0: <RockChip RK805 PMIC> at addr 0x30 irq 57 on iicbus0
generic_timer0: <ARMv8 Generic Timer> irq 4,5,6,7 on ofwbus0
Timecounter "ARM MPCore Timecounter" frequency 24000000 Hz quality 1000
Event timer "ARM MPCore Eventtimer" frequency 24000000 Hz quality 1000
rk_tsadc0: <RockChip temperature sensors> mem 0xff250000-0xff2500ff irq 22 on ofwbus0
cpulist0: <Open Firmware CPU Group> on ofwbus0
cpu0: <Open Firmware CPU> on cpulist0
cpufreq_dt0: <Generic cpufreq driver> on cpu0
cpu1: <Open Firmware CPU> on cpulist0
cpufreq_dt1: <Generic cpufreq driver> on cpu1
cpu2: <Open Firmware CPU> on cpulist0
cpufreq_dt2: <Generic cpufreq driver> on cpu2
cpu3: <Open Firmware CPU> on cpulist0
cpufreq_dt3: <Generic cpufreq driver> on cpu3
uart0: <16750 or compatible> mem 0xff130000-0xff1300ff irq 14 on ofwbus0
uart0: console (-1,n,8,1)
iic0: <I2C generic I/O> on iicbus0
syscon_generic0: <syscon> mem 0xff460000-0xff460fff on ofwbus0
rockchip_dwmmc0: <Synopsys DesignWare Mobile Storage Host Controller (RockChip)> mem 0xff500000-0xff503fff irq 42 on ofwbus0
rockchip_dwmmc0: Hardware version ID is 270a
mmc0: <MMC/SD bus> on rockchip_dwmmc0
rockchip_dwmmc1: <Synopsys DesignWare Mobile Storage Host Controller (RockChip)> mem 0xff520000-0xff523fff irq 44 on ofwbus0
rockchip_dwmmc1: Hardware version ID is 270a
mmc1: <MMC/SD bus> on rockchip_dwmmc1
dwc0: <Rockchip Gigabit Ethernet Controller> mem 0xff540000-0xff54ffff irq 45 on ofwbus0
miibus0: <MII bus> on dwc0
rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 0 on miibus0
rgephy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto
rgephy1: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0
rgephy1: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto
dwc0: Ethernet address: [_MAC_XXXXXXXXXX]
dwcotg0: <DWC OTG 2.0 integrated USB controller> mem 0xff580000-0xff5bffff irq 47 on ofwbus0
usbus0 on dwcotg0
ehci0: <Generic EHCI Controller> mem 0xff5c0000-0xff5cffff irq 48 on ofwbus0
usbus1: EHCI version 1.0
usbus1 on ehci0
ohci0: <Generic OHCI Controller> mem 0xff5d0000-0xff5dffff irq 49 on ofwbus0
usbus2 on ohci0
rk_dwc30: <Rockchip RK3399 DWC3> on ofwbus0
xhci0: <Synopsys Designware DWC3> mem 0xff600000-0xff6fffff irq 58 on rk_dwc30
xhci0: 64 bytes context size, 32-bit DMA
usbus3: trying to attach
usbus3 on xhci0
gpioc0: <GPIO controller> on gpio0
gpioc1: <GPIO controller> on gpio1
gpioc2: <GPIO controller> on gpio2
gpioc3: <GPIO controller> on gpio3
gpioled0: <GPIO LEDs> on ofwbus0
gpioled0: <power> failed to map pin
gpioled0: <standby> failed to map pin
cryptosoft0: <software crypto>
Timecounters tick every 1.000 msec
usbus0: 480Mbps High Speed USB v2.0
usbus1: 480Mbps High Speed USB v2.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 5.0Gbps Super Speed USB v3.0
Obsolete code will be removed soon: random(9) is the obsolete Park-Miller LCG from 1988
ugen2.1: <Generic OHCI root HUB> at usbus2
uhub0 on usbus2
uhub0: <Generic OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen1.1: <Generic EHCI root HUB> at usbus1
uhub1 on usbus1
uhub1: <Generic EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
ugen0.1: <DWCOTG OTG Root HUB> at usbus0
uhub2 on usbus0
uhub2: <DWCOTG OTG Root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
ugen3.1: <Synopsys XHCI root HUB> at usbus3
uhub3 on usbus3
uhub3: <Synopsys XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus3
mmcsd0: 32GB <SDHC 00000 1.0 SN FD9B2EBE MFG 12/2014 by 27 SM> at mmc0 50.0MHz/4bit/256-block
cmd err 0x00000100 cmd 0x00000008
cmd err 0x00000100 cmd 0x00000008
cmd err 0x00000100 cmd 0x00000008
cmd err 0x00000100 cmd 0x00000008
cmd err 0x00000100 cmd 0x00000037
cmd err 0x00000100 cmd 0x00000037
cmd err 0x00000100 cmd 0x00000037
cmd err 0x00000100 cmd 0x00000037
cmd err 0x00000100 cmd 0x00000001
cmd err 0x00000100 cmd 0x00000001
cmd err 0x00000100 cmd 0x00000001
cmd err 0x00000100 cmd 0x00000001
mmc1: No compatible cards found on bus
Release APs...done
CPU 0: ARM Cortex-A53 r0p4 affinity: 0
Instruction Set Attributes 0 = <CRC32,SHA2,SHA1,AES+PMULL>
Instruction Set Attributes 1 = <>
Processor Features 0 = <AdvSIMD,FP,EL3 32,EL2 32,EL1 32,EL0 32>
Processor Features 1 = <>
Memory Model Features 0 = <TGran4,TGran64,SNSMem,BigEnd,16bit ASID,1TB PA>
Memory Model Features 1 = <8bit VMID>
Memory Model Features 2 = <32bit CCIDX,48bit VA>
Debug Features 0 = <2 CTX BKPTs,4 Watchpoints,6 Breakpoints,PMUv3,Debugv8>
Debug Features 1 = <>
Auxiliary Features 0 = <>
Trying to mount root from ufs:/dev/ufs/rootfs [rw]...
Auxiliary Features 1 = <>
CPU 1: ARM Cortex-A53 r0p4 affinity: 1
CPU 2: ARM Cortex-A53 r0p4 affinity: 2
CPU 3: ARM Cortex-A53 r0p4 affinity: 3
WARNING: WITNESS option enabled, expect reduced performance.
Warning: no time-of-day clock registered, system time will not be set accurately
uhub0: 1 port with 1 removable, self powered
uhub3: 2 ports with 2 removable, self powered
uhub2: 1 port with 1 removable, self powered
uhub1: 1 port with 1 removable, self powered
ugen3.2: <Realtek USB 10/100/1000 LAN> at usbus3
lo0: link state changed to UP
dwc0: link state changed to DOWN
ure0 on uhub3
ure0: <Realtek USB 10/100/1000 LAN, class 0/0, rev 3.00/31.00, addr 1> on usbus3
ure0: unknown version 0x0000
ure0: timeout waiting for chip autoload
ure0: timeout waiting for phy to stabilize
ure0: timeout waiting for phy to stabilize
ure0: timeout waiting for phy to stabilize
ure0: MAC assigned randomly
ure0: attaching PHYs failed