Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].
Date: 2020-02-14 23:45:15
From: johnklos
Description: Mac mini G4
[ 1.000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, [ 1.000000] 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, [ 1.000000] 2018, 2019, 2020 The NetBSD Foundation, Inc. All rights reserved. [ 1.000000] Copyright (c) 1982, 1986, 1989, 1991, 1993 [ 1.000000] The Regents of the University of California. All rights reserved. [ 1.000000] NetBSD 9.0 (AMI) #0: Fri Feb 14 23:37:51 UTC 2020 [ 1.000000] [_EMAIL_XXXXXX]:/usr/obj-macppc/sys/arch/macppc/compile/AMI [ 1.000000] total memory = 1024 MB [ 1.000000] oea_startup: failed to allocate DEAD ZONE: error=12 [ 1.000000] avail memory = 979 MB [ 1.000000] timecounter: Timecounters tick every 10.000 msec [ 1.000000] Kernelized RAIDframe activated [ 1.000000] found openpic PIC at 80040000 [ 1.000000] OpenPIC Version 1.2: Supports 4 CPUs and 64 interrupt sources. [ 1.000000] bootpath: /pci@f4000000/ata-6@d/disk@0:2,/netbsd [ 1.000000] mainbus0 (root) [ 1.000000] cpu0 at mainbus0: 7447A (Revision 1.2), ID 0 (primary) [ 1.000000] cpu0: HID0 0x84d0c1bc<EMCP,TBEN,HIGH_BAT_EN,NAP,DPM,ICE,DCE,XBSEN,SGE,BTIC,LRSTK,FOLD,BHT>, powersave: 1 [ 1.000000] cpu0: 1500.00 MHz, 512KB L2 cache no parity [ 1.000000] memory0 at mainbus0: len=128 [ 1.000000] spdmem0 at memory0 [ 1.000000] spdmem0: DDR SDRAM, no parity or ECC, 1GB, 400MHz (PC-3200) [ 1.000000] spdmem0: 13 rows, 11 cols, 2 ranks, 4 banks/chip, 5.0ns cycle time [ 1.000000] spdmem0: tAA-tRCD-tRP-tRAS: 2-3-3-8 [ 1.000000] spdmem0: voltage SSTL 2.5V, refresh time 7.8us (self-refreshing) [ 1.000000] uni_n0 at mainbus0 address 0xf8000000 [ 1.000000] hw-clock at uni_n0 not configured [ 1.000000] ki2c0 at uni_n0 address 0xf8001000 [ 1.000000] iic0 at ki2c0: I2C bus [ 1.000000] cereal at iic0 addr 0xe0 not configured [ 1.000000] uninorth0 at mainbus0 [ 1.000000] pci0 at uninorth0 bus 0 [ 1.000000] pci0: i/o space, memory space enabled [ 1.000000] pchb0 at pci0 dev 11 function 0 [ 1.000000] pchb0: Apple Computer UniNorth AGP Bridge (rev. 0x00) [ 1.000000] radeonfb0 at pci0 dev 16 function 0: ATI Technologies Radeon 9200 5962 (rev. 0x01) [ 1.000000] trying to read disabled BIOS... [ 1.000000] radeonfb0: No video BIOS, using default clocks [ 1.000000] radeonfb0: refclk = 27.000 MHz, refdiv = 12 minpll = 125000, maxpll = 400000 [ 1.000000] radeonfb0: 64 MB aperture at 0x98000000, 64 KB registers at 0x90000000 [ 1.000000] radeonfb0: display 0: initial virtual resolution 640x480 at 8 bpp [ 1.000000] radeonfb0: using 32 MB per display [ 1.000000] radeonfb0: port 0: physical 1024x768 60Hz [ 1.000000] radeonfb0: port 1: physical 1024x768 60Hz [ 1.000000] wsdisplay0 at radeonfb0 kbdmux 1: console (fb, vt100 emulation) [ 1.000000] wsmux1: connecting to wsdisplay0 [ 1.000000] drm at radeonfb0 not configured [ 1.000000] uninorth1 at mainbus0 [ 1.000000] pci1 at uninorth1 bus 0 [ 1.000000] pci1: i/o space, memory space enabled [ 1.000000] pchb1 at pci1 dev 11 function 0 [ 1.000000] pchb1: Apple Computer UniNorth Host-PCI Bridge (rev. 0x00) [ 1.000000] bwi0 at pci1 dev 18 function 0: Broadcom Wireless [ 1.000000] bwi0: interrupting at irq 52 [ 1.000000] bwi0: BBP id 0x4306, BBP rev 0x3, BBP pkg 0 [ 1.000000] bwi0: MAC: rev 5 [ 1.000000] bwi0: PHY type 2, rev 2, ver 2 [ 1.000000] bwi0: RF manu 0x17f, type 0x2050, rev 2 [ 1.000000] bwi0: autoconfiguration error: invalid antenna gain in sprom [ 1.000000] bwi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps [ 1.000000] bwi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps [ 1.000000] obio0 at pci1 dev 23 function 0: addr 0x80000000 [ 1.000000] zsc0 at obio0 irq 22,23 [ 1.000000] zstty0 at zsc0 channel 0 [ 1.000000] zstty1 at zsc0 channel 1 [ 1.000000] snapper0 at obio0 offset 0x10000: irq 30,1,2 [ 1.000000] pmu0 at obio0 offset 0x16000 irq 47: rev. 85 [ 1.000000] pmu0: initializing IIC bus [ 1.000000] iic1 at pmu0: I2C bus [ 1.000000] admtemp0 at iic1 addr 0x48: MAX6642 temperature sensor: id. 0x4d, rev. 0x4d [ 1.000000] pmu0: initializing RTC [ 1.000000] pmu0: power-mgt not configured [ 1.000000] pmu0: pmu-pwm-fans not configured [ 1.000000] ki2c1 at obio0 [ 1.000000] iic2 at ki2c1: I2C bus [ 1.000000] cereal at iic2 addr 0xe0 not configured [ 1.000000] wdc0 at obio0 offset 0x20000 irq 24, level triggered: DMA transfer [ 1.000000] atabus0 at wdc0 channel 0 [ 1.000000] snapper0: software codec [ 1.000000] audio0 at snapper0: playback, capture, full duplex [ 1.000000] audio0: slinear_be:16 -> slinear_be:16 2ch 48000Hz, blk 21ms for playback [ 1.000000] audio0: slinear_be:16 <- slinear_be:16 2ch 48000Hz, blk 21ms for recording [ 1.000000] spkr0 at audio0: PC Speaker (synthesized) [ 1.000000] wsbell at spkr0 not configured [ 1.000000] ohci0 at pci1 dev 24 function 0: Apple Computer Intrepid USB Controller (rev. 0x00) [ 1.000000] ohci0: autoconfiguration error: memory access is disabled [ 1.000000] ohci1 at pci1 dev 25 function 0: Apple Computer Intrepid USB Controller (rev. 0x00) [ 1.000000] ohci1: autoconfiguration error: memory access is disabled [ 1.000000] ohci2 at pci1 dev 26 function 0: Apple Computer Intrepid USB Controller (rev. 0x00) [ 1.000000] ohci2: interrupting at irq 29 [ 1.000000] ohci2: OHCI version 1.0, legacy support [ 1.000000] usb0 at ohci2: USB revision 1.0 [ 1.000000] ohci3 at pci1 dev 27 function 0: NEC USB Host Controller (rev. 0x43) [ 1.000000] ohci3: interrupting at irq 63 [ 1.000000] ohci3: OHCI version 1.0 [ 1.000000] usb1 at ohci3: USB revision 1.0 [ 1.000000] ohci4 at pci1 dev 27 function 1: NEC USB Host Controller (rev. 0x43) [ 1.000000] ohci4: interrupting at irq 63 [ 1.000000] ohci4: OHCI version 1.0 [ 1.000000] usb2 at ohci4: USB revision 1.0 [ 1.000000] ehci0 at pci1 dev 27 function 2: NEC USB2 Host Controller (rev. 0x04) [ 1.000000] ehci0: interrupting at irq 63 [ 1.000000] ehci0: EHCI version 1.0 [ 1.000000] ehci0: 2 companion controllers, 3 ports each: ohci3 ohci4 [ 1.000000] usb3 at ehci0: USB revision 2.0 [ 1.000000] uninorth2 at mainbus0 [ 1.000000] pci2 at uninorth2 bus 0 [ 1.000000] pci2: i/o space, memory space enabled [ 1.000000] pchb2 at pci2 dev 11 function 0 [ 1.000000] pchb2: Apple Computer UniNorth Host-PCI Bridge (rev. 0x00) [ 1.000000] wdc1 at pci2 dev 13 function 0: interrupting at irq 39 [ 1.000000] atabus1 at wdc1 channel 0 [ 1.000000] fwohci0 at pci2 dev 14 function 0: Apple Computer UniNorth Firewire (rev. 0x81) [ 1.000000] fwohci0: interrupting at irq 40 [ 1.000000] fwohci0: OHCI version 1.10 (ROM=0) [ 1.000000] fwohci0: No. of Isochronous channels is 8. [ 1.000000] fwohci0: EUI64 [_MAC_XXXXXXXXXX]:af:04 [ 1.000000] fwohci0: Phy 1394a available S400, 2 ports. [ 1.000000] fwohci0: Link S400, max_rec 2048 bytes. [ 1.000000] ieee1394if0 at fwohci0: IEEE1394 bus [ 1.000000] fwip0 at ieee1394if0: IP over IEEE1394 [ 1.000000] fwohci0: Initiate bus reset [ 1.000000] fwohci0: Clear PME# now [ 1.000000] gem0 at pci2 dev 15 function 0: Apple Computer GMAC Ethernet (rev. 0x80) [ 1.000000] gem0: interrupting at irq 41 [ 1.000000] bmtphy0 at gem0 phy 0: BCM5221 10/100 media interface, rev. 4 [ 1.000000] bmtphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto [ 1.000000] gem0: Ethernet address [_MAC_XXXXXXXXXX], 10KB RX fifo, 4KB TX fifo [ 1.000000] vmmask 737c0000 schedmask 7ffc0000 highmask 7ffc0000 [ 1.000000] timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0 [ 1.000003] timecounter: Timecounter "mftb" frequency 41620997 Hz quality 100 [ 1.000015] fwohci0: BUS reset [ 1.000015] fwohci0: node_id=0xc800ffc0, gen=2, CYCLEMASTER mode [ 1.000015] ieee1394if0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me) [ 1.000015] ieee1394if0: bus manager 0 [ 1.069997] uhub0 at usb0: NetBSD (0000) OHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1 [ 1.069997] uhub0: 2 ports with 2 removable, self powered [ 1.069997] uhub1 at usb1: NetBSD (0000) OHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1 [ 1.069997] uhub1: 3 ports with 3 removable, self powered [ 1.069997] uhub2 at usb2: NetBSD (0000) OHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1 [ 1.069997] uhub2: 2 ports with 2 removable, self powered [ 1.069997] uhub3 at usb3: NetBSD (0000) EHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 1 [ 1.069997] uhub3: 5 ports with 5 removable, self powered [ 1.069997] IPsec: Initialized Security Association Processing. [ 3.369996] uhidev0 at uhub0 port 1 configuration 1 interface 0 [ 3.369996] uhidev0: Apple Computer (0x5ac) Bluetooth HCI (HID-proxy mode) (0x1000), rev 2.00/15.86, addr 2, iclass 3/1 [ 3.399996] ukbd0 at uhidev0 [ 3.809996] wskbd0 at ukbd0: console keyboard, using wsdisplay0 [ 3.809996] uhidev1 at uhub0 port 1 configuration 1 interface 1 [ 3.809996] uhidev1: Apple Computer (0x5ac) Bluetooth HCI (HID-proxy mode) (0x1000), rev 2.00/15.86, addr 2, iclass 3/1 [ 3.859996] ums0 at uhidev1: 5 buttons [ 3.859996] wsmouse0 at ums0 mux 0 [ 4.119995] wd0 at atabus1 drive 0 [ 4.119995] wd0: <ST2000LM003 HN-M201RAD> [ 4.119995] wd0: drive supports 16-sector PIO transfers, LBA48 addressing [ 4.119995] wd0: 1863 GB, 3876021 cyl, 16 head, 63 sec, 512 bytes/sect x 3907029168 sectors [ 4.169996] wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133), NCQ (32 tags) w/PRIO [ 4.169996] wd0(wdc1:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) (using DMA) [ 4.169996] swwdog0: software watchdog initialized [ 4.169996] WARNING: 3 errors while detecting hardware; check system log. [ 4.169996] boot device: wd0 [ 4.169996] root on wd0a dumps on wd0b [ 4.189999] root file system type: ffs [ 4.189999] kern.module.path=/stand/macppc/9.0/modules