Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].


Date: 2020-02-15 14:17:11
From: jmcneill
Description: NetBSD/amd64 9.0 on HPE ProLiant MicroServer Gen10
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
    2018, 2019, 2020 The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 9.0 (GENERIC) #0: Fri Feb 14 00:06:28 UTC 2020
	[_EMAIL_XXXXXXXXXXXXXXXXX]:/usr/src/sys/arch/amd64/compile/GENERIC
total memory = 7639 MB
avail memory = 7394 MB
cpu_rng: RDRAND
timecounter: Timecounters tick every 10.000 msec
Kernelized RAIDframe activated
running cgd selftest aes-xts-256 aes-xts-512 done
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
HPE ProLiant MicroServer Gen10 (Rev B)
mainbus0 (root)
ACPI: RSDP 0x00000000000F05B0 000024 (v02 ALASKA)
ACPI: XSDT 0x00000000DD3AC0A0 0000BC (v01 ALASKA A M I    01072009 AMI  00010013)
ACPI: FACP 0x00000000DD3B3E00 00010C (v05 ALASKA A M I    01072009 AMI  00010013)
Firmware Warning (ACPI): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20190405/tbfadt-693)
ACPI: DSDT 0x00000000DD3AC1F0 007C09 (v02 ALASKA A M I    01072009 INTL 20120913)
ACPI: FACS 0x00000000DD6DCF00 000040
ACPI: APIC 0x00000000DD3B3F10 00007E (v03 ALASKA A M I    01072009 AMI  00010013)
ACPI: FPDT 0x00000000DD3B3F90 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
ACPI: FIDT 0x00000000DD3B3FD8 00009C (v01 ALASKA A M I    01072009 AMI  00010013)
ACPI: MCFG 0x00000000DD3B4078 00003C (v01 ALASKA A M I    01072009 MSFT 00010013)
ACPI: HPET 0x00000000DD3B40B8 000038 (v01 ALASKA A M I    01072009 AMI  00000005)
ACPI: ASF! 0x00000000DD3B40F0 0000D6 (v32 AMD    SB700ASF 00000001 TFSM 000F4240)
ACPI: UEFI 0x00000000DD3B41C8 000042 (v01                 00000000      00000000)
ACPI: SSDT 0x00000000DD3B4210 000854 (v01 AMD    AGESA    00000001 AMD  00000001)
ACPI: SSDT 0x00000000DD3B4A68 00888F (v02 AMD    AGESA    00000002 MSFT 04000000)
ACPI: CRAT 0x00000000DD3BD2F8 000528 (v01 AMD    AGESA    00000001 AMD  00000001)
ACPI: SSDT 0x00000000DD3BD820 001492 (v01 AMD    CPMDFIGP 00000001 INTL 20120913)
ACPI: SSDT 0x00000000DD3BECB8 00165E (v01 AMD    CPMCMN   00000001 INTL 20120913)
ACPI: HEST 0x00000000DD3C0318 0000EC (v01 AMD    AMD HEST 00000000      00000000)
ACPI: BERT 0x00000000DD3C0408 000030 (v01 AMD    AMD BERT 00000000      00000000)
ACPI: EINJ 0x00000000DD3C0438 000130 (v01 AMI    AMI.EINJ 00000000 AMI. 00000000)
ACPI: ERST 0x00000000DD3C0568 000230 (v01 AMIER  AMI.ERST 00000000 AMI. 00000000)
ACPI: BERT 0x00000000DD3C0798 000030 (v01 AMI    AMI.BERT 00000000 AMI. 00000000)
ACPI: HEST 0x00000000DD3C07C8 0000A8 (v01 AMI    AMI.HEST 00000000 AMI. 00000000)
ACPI: 5 ACPI AML tables successfully acquired and loaded
ioapic0 at mainbus0 apid 0: pa 0xfec00000, version 0x21, 24 pins
ioapic1 at mainbus0 apid 1: pa 0xfec01000, version 0x21, 32 pins
cpu0 at mainbus0 apid 16
cpu0: AMD Opteron(tm) X3421 APU                      , id 0x660f01
cpu0: package 0, core 0, smt 0
cpu1 at mainbus0 apid 17
cpu1: AMD Opteron(tm) X3421 APU                      , id 0x660f01
cpu1: package 0, core 1, smt 0
cpu2 at mainbus0 apid 18
cpu2: AMD Opteron(tm) X3421 APU                      , id 0x660f01
cpu2: package 0, core 2, smt 0
cpu3 at mainbus0 apid 19
cpu3: AMD Opteron(tm) X3421 APU                      , id 0x660f01
cpu3: package 0, core 3, smt 0
acpi0 at mainbus0: Intel ACPICA 20190405
acpi0: X/RSDT: OemId <ALASKA,  A M I ,01072009>, AslId <AMI ,00010013>
acpi0: MCFG: segment 0, bus 0-63, address 0x00000000f8000000
acpi0: SCI interrupting at int 9
acpi0: fixed power button present
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
AMDN (PNP0C01) at acpi0 not configured
BROD (PNP0C02) at acpi0 not configured
UMEM (PNP0C02) at acpi0 not configured
acpivga0 at acpi0 (VGA): ACPI Display Adapter
acpiout0 at acpivga0 (LCD, 0x0110): ACPI Display Output Device
acpiout0: brightness levels: [2,4,6,8,10,12,14,16,18,20,22,24,26,28,30,32,34,36,38,40,42,44,46,48,50,52,54,56,58,60,62,64,66,68,70,72,74,76,78,80,82,84,86,88,90,92,94,96,98,100]
I2SC at acpivga0 not configured
acpivga0: connected output devices:
acpivga0:   0x0100: Ext. Monitor, head 0, bios detect
acpivga0:   0x0110 (acpiout0): LCD Panel, head 0, bios detect
acpivga0:   0x0200: TV, head 0
acpivga0:   0x0210: Unknown Output Device, head 0, bios detect
acpivga0:   0x0220: Unknown Output Device, head 0, bios detect
RTKC (RTK0000) at acpi0 not configured
attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43 irq 0
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
spkr0 at pcppi1: PC Speaker
wsbell at spkr0 not configured
midi0 at pcppi1: PC speaker
sysbeep0 at pcppi1
S900 (PNP0C02) at acpi0 not configured
acpibut0 at acpi0 (PWRB, PNP0C0C-170): ACPI Power Button
GPIO (AMD0030) at acpi0 not configured
FUR0 (AMD0020) at acpi0 not configured
I2CA (AMD0010) at acpi0 not configured
I2CB (AMD0010) at acpi0 not configured
AWR0 (PNP0C02) at acpi0 not configured
ABR0 (PNP0C02) at acpi0 not configured
ABR1 (PNP0C02) at acpi0 not configured
ABR2 (PNP0C02) at acpi0 not configured
ABR3 (PNP0C02) at acpi0 not configured
ABR4 (PNP0C02) at acpi0 not configured
AWR1 (PNP0C02) at acpi0 not configured
ABR5 (PNP0C02) at acpi0 not configured
ABR6 (PNP0C02) at acpi0 not configured
ABR7 (PNP0C02) at acpi0 not configured
ABR8 (PNP0C02) at acpi0 not configured
ABR9 (PNP0C02) at acpi0 not configured
ACPI: Enabled 1 GPEs in block 00 to 1F
attimer1: attached to pcppi1
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 1022 product 1576 (rev. 0x00)
vga0 at pci0 dev 1 function 0: vendor 1002 product 9874 (rev. 0x84)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
drm at vga0 not configured
pchb1 at pci0 dev 2 function 0: vendor 1022 product 157b (rev. 0x00)
ppb0 at pci0 dev 2 function 2: vendor 1022 product 157c (rev. 0x00)
ppb0: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x2 @ 8.0GT/s
ppb0: link is x2 @ 5.0GT/s
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
ahcisata0 at pci1 dev 0 function 0: vendor 1b4b product 9230 (rev. 0x11)
ahcisata0: 64-bit DMA
ahcisata0: AHCI revision 1.20, 8 ports, 32 slots, CAP 0xc0309f07<PMD,ISS=0x3=Gen3,SNCQ,S64A>
ahcisata0: interrupting at msi0 vec 0
atabus0 at ahcisata0 channel 0
atabus1 at ahcisata0 channel 1
atabus2 at ahcisata0 channel 2
atabus3 at ahcisata0 channel 3
atabus4 at ahcisata0 channel 4
atabus5 at ahcisata0 channel 5
atabus6 at ahcisata0 channel 6
atabus7 at ahcisata0 channel 7
ppb1 at pci0 dev 2 function 5: vendor 1022 product 157c (rev. 0x00)
ppb1: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 8.0GT/s
ppb1: link is x1 @ 5.0GT/s
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled
bge0 at pci2 dev 0 function 0: Broadcom BCM5720 Gigabit Ethernet
bge0: APE firmware NCSI[_IP_XX]
bge0: interrupting at msix1 vec 0
bge0: HW config 002b10d4, 00006014, 0000aa38, 00000000 00000000
bge0: ASIC BCM5720 A0 (0x5720000), Ethernet address [_MAC_XXXXXXXXXX]
bge0: setting short Tx thresholds
brgphy0 at bge0 phy 1: BCM5720C 1000BASE-T media interface, rev. 0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
bge1 at pci2 dev 0 function 1: Broadcom BCM5720 Gigabit Ethernet
bge1: APE firmware NCSI[_IP_XX]
bge1: interrupting at msix2 vec 0
bge1: HW config 002b10d4, 00006014, 0000aa38, 00000000 00000000
bge1: ASIC BCM5720 A0 (0x5720000), Ethernet address [_MAC_XXXXXXXXXX]
bge1: setting short Tx thresholds
brgphy1 at bge1 phy 2: BCM5720C 1000BASE-T media interface, rev. 0
brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
pchb2 at pci0 dev 3 function 0: vendor 1022 product 157b (rev. 0x00)
vendor 1022 product 1578 (miscellaneous crypto) at pci0 dev 8 function 0 not configured
pchb3 at pci0 dev 9 function 0: vendor 1022 product 157d (rev. 0x00)
xhci0 at pci0 dev 16 function 0: vendor 1022 product 7914 (rev. 0x20)
xhci0: interrupting at msix3 vec 0
xhci0: xHCI version 1.0
usb0 at xhci0: USB revision 3.0
usb1 at xhci0: USB revision 2.0
ahcisata1 at pci0 dev 17 function 0: vendor 1022 product 7901 (rev. 0x49)
ahcisata1: 64-bit DMA
ahcisata1: AHCI revision 1.30, 1 port, 32 slots, CAP 0xf733ff00<PSC,SSC,PMD,FBSS,SPM,ISS=0x3=Gen3,SCLO,SAL,SALP,SMPS,SSNTF,SNCQ,S64A>
ahcisata1: interrupting at ioapic0 pin 19
atabus8 at ahcisata1 channel 0
ehci0 at pci0 dev 18 function 0: vendor 1022 product 7908 (rev. 0x49)
ehci0: interrupting at ioapic0 pin 18
ehci0: BIOS has given up ownership
ehci0: EHCI version 1.0
usb2 at ehci0: USB revision 2.0
piixpm0 at pci0 dev 20 function 0: vendor 1022 product 790b (rev. 0x4a)
piixpm0: polling
iic0 at piixpm0 port 0: I2C bus
iic1 at piixpm0 port 1: I2C bus
iic2 at piixpm0 port 2: I2C bus
iic3 at piixpm0 port 3: I2C bus
pcib0 at pci0 dev 20 function 3: vendor 1022 product 790e (rev. 0x11)
pchb4 at pci0 dev 24 function 0: vendor 1022 product 1570 (rev. 0x00)
pchb5 at pci0 dev 24 function 1: vendor 1022 product 1571 (rev. 0x00)
pchb6 at pci0 dev 24 function 2: vendor 1022 product 1572 (rev. 0x00)
pchb7 at pci0 dev 24 function 3: vendor 1022 product 1573 (rev. 0x00)
pchb8 at pci0 dev 24 function 4: vendor 1022 product 1574 (rev. 0x00)
pchb9 at pci0 dev 24 function 5: vendor 1022 product 1575 (rev. 0x00)
isa0 at pcib0
pckbc0 at isa0 port 0x60-0x64
autoconfiguration error: pckbc: cmd word write error
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: HLT, lat   0 us, pow     0 mW
acpicpu0: C2: I/O, lat 400 us, pow     0 mW
acpicpu0: P0: FFH, lat   4 us, pow  5036 mW, 2100 MHz
acpicpu0: P1: FFH, lat   4 us, pow  3650 mW, 1800 MHz
acpicpu0: P2: FFH, lat   4 us, pow  2428 mW, 1400 MHz
acpicpu0: T0: I/O, lat   1 us, pow     0 mW, 100 %
acpicpu0: T1: I/O, lat   1 us, pow     0 mW,  88 %
acpicpu0: T2: I/O, lat   1 us, pow     0 mW,  76 %
acpicpu0: T3: I/O, lat   1 us, pow     0 mW,  64 %
acpicpu0: T4: I/O, lat   1 us, pow     0 mW,  52 %
acpicpu0: T5: I/O, lat   1 us, pow     0 mW,  40 %
acpicpu0: T6: I/O, lat   1 us, pow     0 mW,  28 %
acpicpu0: T7: I/O, lat   1 us, pow     0 mW,  16 %
acpicpu1 at cpu1: ACPI CPU
acpicpu2 at cpu2: ACPI CPU
acpicpu3 at cpu3: ACPI CPU
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
autoconfiguration error: ERROR: 752 cycle TSC drift observed
acpivga0: connected output devices:
acpivga0:   0x0100: Ext. Monitor, head 0, bios detect
acpivga0:   0x0110 (acpiout0): LCD Panel, head 0, bios detect
acpivga0:   0x0200: TV, head 0
acpivga0:   0x0210: Unknown Output Device, head 0, bios detect
acpivga0:   0x0220: Unknown Output Device, head 0, bios detect
uhub0 at usb0: NetBSD (0000) xHCI root hub (0000), class 9/0, rev 3.00/1.00, addr 0
uhub0: 4 ports with 4 removable, self powered
uhub1 at usb1: NetBSD (0000) xHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 0
uhub1: 4 ports with 4 removable, self powered
IPsec: Initialized Security Association Processing.
uhub2 at usb2: NetBSD (0000) EHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ahcisata0 port 0: device present, speed: 6.0Gb/s
ahcisata0 port 1: device present, speed: 6.0Gb/s
ahcisata0 port 2: device present, speed: 6.0Gb/s
ahcisata0 port 7: device present, speed: 1.5Gb/s
ahcisata0 port 7: device present, speed: 1.5Gb/s
ahcisata0 port 0: device present, speed: 6.0Gb/s
ahcisata0 port 1: device present, speed: 6.0Gb/s
ahcisata0 port 2: device present, speed: 6.0Gb/s
autoconfiguration error: ahcisata0 port 7: setting WDCTL_RST failed for drive 0
autoconfiguration error: ahcisata0 port 0: setting WDCTL_RST failed for drive 0
autoconfiguration error: ahcisata0 port 1: setting WDCTL_RST failed for drive 0
uhub3 at uhub2 port 1: vendor 0438 (0x438) product 7900 (0x7900), class 9/0, rev 2.00/0.18, addr 2
uhub3: single transaction translator
uhub3: 4 ports with 4 removable, self powered
wd0 at atabus0 drive 0
wd0: <CT500MX500SSD1>
wd0: drive supports 1-sector PIO transfers, LBA48 addressing
wd0: 465 GB, 969021 cyl, 16 head, 63 sec, 512 bytes/sect x 976773168 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133), WRITE DMA FUA, NCQ (32 tags)
wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA), NCQ (31 tags)
wd1 at atabus1 drive 0
wd1: <Hitachi HDS723020BLA642>
wd1: drive supports 16-sector PIO transfers, LBA48 addressing
wd1: 1863 GB, 3876021 cyl, 16 head, 63 sec, 512 bytes/sect x 3907029168 sectors
wd1: GPT GUID: 620df83a-1a61-4e18-8fcc-971af21851b4
dk0 at wd1: "data", 3907029101 blocks at 34, type: ffs
wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133), WRITE DMA FUA, NCQ (32 tags) w/PRIO
wd1(ahcisata0:1:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA), NCQ (31 tags) w/PRIO
wd2 at atabus2 drive 0
wd2: <WDC WD30EFRX-68AX9N0>
wd2: drive supports 16-sector PIO transfers, LBA48 addressing
wd2: 2794 GB, 5814021 cyl, 16 head, 63 sec, 512 bytes/sect x 5860533168 sectors
wd2: GPT GUID: 3a7b13b8-c84d-4b80-abb7-1018c157f229
dk1 at wd2: "media", 5860533088 blocks at 40, type: ffs
wd2: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133), NCQ (32 tags) w/PRIO
wd2(ahcisata0:2:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA), NCQ (31 tags) w/PRIO
atapibus0 at atabus7: 1 targets
uk0 at atapibus0 drive 0: <MARVELL VIRTUAL, HKDP221516WL, 1.09> processor fixed
uk0: drive supports PIO mode 4, Ultra-DMA mode 4 (Ultra/66)
uk0(ahcisata0:7:0): using PIO mode 4, Ultra-DMA mode 4 (Ultra/66) (using DMA)
umass0 at uhub3 port 2 configuration 1 interface 0
umass0: HP (0x13fe) 8GB_EM_USB_Drive (0x4200), rev 2.00/1.00, addr 3
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, 1 lun per target
sd0 at scsibus0 target 0 lun 0: <HP, 8GB_EM_USB_Drive, PMAP> disk removable
sd0: 7652 MB, 3841 cyl, 255 head, 32 sec, 512 bytes/sect x 15671296 sectors
sd0: GPT GUID: bf8deb0f-f067-43a1-9031-aeb65cc4b245
dk2 at sd0: "46d84c2f-055e-4dd7-bf6c-af578e243195", 2048 blocks at 2048, type: <unknown>
dk3 at sd0: "8ee237f5-ad50-496c-932c-1e6c803206e8", 4857631 blocks at 4096, type: ext2fs
ugen0 at uhub3 port 3
ugen0: APC (0x51d) Back-UPS ES 450G FW:844.K4 .D USB FW:K4 (0x02), rev 1.10/1.06, addr 4
umodem0 at uhub3 port 4 configuration 1 interface 0
umodem0: SoftIron, Inc. (0x2e02) OverDrive 1000 (0x1000), rev 2.00/1.02, addr 5, iclass 2/2
umodem0: data interface 1, has no CM over data, has break
umodem0: status change notification available
ucom0 at umodem0
WARNING: 5 errors while detecting hardware; check system log.
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
kern.module.path=/stand/amd64/9.0/modules