Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2020-02-22 03:52:58
From: yamori813
Description: Asus K8V with ral
---<<BOOT>>--- Copyright (c) 1992-2019 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 12.1-RELEASE-p2 GENERIC amd64 FreeBSD clang version 8.0.1 (tags/RELEASE_801/final 366581) (based on LLVM 8.0.1) VT(vga): resolution 640x480 CPU: AMD Athlon(tm) 64 Processor 3000+ (2002.60-MHz K8-class CPU) Origin="AuthenticAMD" Id=0xf48 Family=0xf Model=0x4 Stepping=8 Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2> AMD Features=0xe0500800<SYSCALL,NX,MMX+,LM,3DNow!+,3DNow!> real memory = 1072889856 (1023 MB) avail memory = 999391232 (953 MB) Event timer "LAPIC" quality 100 ACPI APIC Table: <A M I OEMAPIC > random: unblocking device. ioapic0: Changing APIC ID to 1 MADT: Forcing active-low polarity and level trigger for SCI ioapic0 <Version 0.3> irqs 0-23 on motherboard Timecounter "TSC" frequency 2002602262 Hz quality 800 random: entropy device external interface kbd1 at kbdmux0 000.000022 [4335] netmap_init netmap: loaded module [ath_hal] loaded module_register_init: MOD_LOAD (vesa, 0xffffffff8112e0f0, 0) error 19 nexus0 vtvga0: <VT VGA driver> on motherboard cryptosoft0: <software crypto> on motherboard acpi0: <A M I OEMRSDT> on motherboard acpi0: Power Button (fixed) cpu0: <ACPI CPU> on acpi0 attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 atrtc0: registered as a time-of-day clock, resolution 1.000000s Event timer "RTC" frequency 32768 Hz quality 0 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 agp0: <VIA 8385 host to PCI bridge> on hostb0 pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 vgapci0: <VGA-compatible display> mem 0xfc000000-0xfcffffff,0xe8000000-0xefffffff irq 16 at device 0.0 on pci1 vgapci0: Boot video device pci0: <serial bus, FireWire> at device 7.0 (no driver attached) atapci0: <Promise PDC20378 SATA150 controller> port 0xe800-0xe83f,0xe400-0xe40f,0xe000-0xe07f mem 0xfdf00000-0xfdf00fff,0xfde00000-0xfde1ffff irq 18 at device 8.0 on pci0 ata2: <ATA channel> at channel 0 on atapci0 ata3: <ATA channel> at channel 1 on atapci0 ata4: <ATA channel> at channel 2 on atapci0 skc0: <3Com 3C940 Gigabit Ethernet> port 0xd400-0xd4ff mem 0xfda00000-0xfda03fff irq 17 at device 10.0 on pci0 skc0: 3Com Gigabit LOM (3C940) rev. (0x1) sk0: <Marvell Semiconductor, Inc. Yukon> on skc0 sk0: Ethernet address: [_MAC_XXXXXXXXXX] miibus0: <MII bus> on sk0 e1000phy0: <Marvell 88E1011 Gigabit PHY> PHY 0 on miibus0 e1000phy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto cbb0: <RF5C475 PCI-CardBus Bridge> at device 12.0 on pci0 cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 bge0: <Altima Gigabit Ethernet Controller, ASIC rev. 0x000105> mem 0xfdb00000-0xfdb0ffff irq 18 at device 13.0 on pci0 bge0: CHIP ID 0x00000105; ASIC REV 0x00; CHIP REV 0x01; PCI on PCI-X 33 MHz; 32bit miibus1: <MII bus> on bge0 brgphy0: <BCM5701 1000BASE-T media interface> PHY 1 on miibus1 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow bge0: Ethernet address: [_MAC_XXXXXXXXXX] pcm0: <ESS Technology Maestro3> port 0xd000-0xd0ff mem 0xfdc00000-0xfdc01fff irq 19 at device 14.0 on pci0 pcm0: <Wolfson WM9703/4/7/8 AC97 Codec> atapci1: <VIA 6420 SATA150 controller> port 0xc800-0xc807,0xc400-0xc403,0xc000-0xc007,0xb800-0xb803,0xb400-0xb40f,0xb000-0xb0ff irq 20 at device 15.0 on pci0 ata5: <ATA channel> at channel 0 on atapci1 ata6: <ATA channel> at channel 1 on atapci1 atapci2: <VIA 8237 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfc00-0xfc0f at device 15.1 on pci0 ata0: <ATA channel> at channel 0 on atapci2 ata1: <ATA channel> at channel 1 on atapci2 uhci0: <VIA 83C572 USB controller> port 0xbc00-0xbc1f irq 21 at device 16.0 on pci0 uhci0: LegSup = 0xa000 usbus0 on uhci0 uhci1: <VIA 83C572 USB controller> port 0xcc00-0xcc1f irq 21 at device 16.1 on pci0 uhci1: LegSup = 0xa000 usbus1 on uhci1 uhci2: <VIA 83C572 USB controller> port 0xdc00-0xdc1f irq 21 at device 16.2 on pci0 uhci2: LegSup = 0xa000 usbus2 on uhci2 uhci3: <VIA 83C572 USB controller> port 0xec00-0xec1f irq 21 at device 16.3 on pci0 uhci3: LegSup = 0xa000 usbus3 on uhci3 ehci0: <VIA VT6202 USB 2.0 controller> mem 0xfd400000-0xfd4000ff irq 21 at device 16.4 on pci0 usbus4: EHCI version 1.0 usbus4 on ehci0 isab0: <PCI-ISA bridge> at device 17.0 on pci0 isa0: <ISA bus> on isab0 acpi_button0: <Power Button> on acpi0 acpi_button1: <Sleep Button> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 ppc0: <Parallel port> port 0x378-0x37f irq 7 on acpi0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode ppbus0: <Parallel port bus> on ppc0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 powernow0: <Cool`n'Quiet K8> on cpu0 Timecounters tick every 1.000 msec usbus0: 12Mbps Full Speed USB v1.0 usbus1: 12Mbps Full Speed USB v1.0 usbus2: 12Mbps Full Speed USB v1.0 usbus3: 12Mbps Full Speed USB v1.0 ugen0.1: <VIA UHCI root HUB> at usbus0 uhub0: <VIA UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 ugen1.1: <VIA UHCI root HUB> at usbus1 uhub1: <VIA UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 ugen2.1: <VIA UHCI root HUB> at usbus2 uhub2: <VIA UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 ugen3.1: <VIA UHCI root HUB> at usbus3 uhub3: <VIA UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3 usbus4: 480Mbps High Speed USB v2.0 ugen4.1: <VIA EHCI root HUB> at usbus4 uhub4: <VIA EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4 uhub0: 2 ports with 2 removable, self powered uhub1: 2 ports with 2 removable, self powered uhub2: 2 ports with 2 removable, self powered uhub3: 2 ports with 2 removable, self powered cardbus0: Expecting link target, got 0x1 cardbus0: Expecting link target, got 0x1 ral0: <Ralink Technology RT2860> irq 17 at device 0.0 on cardbus0 ral0: MAC/BBP RT2860 (rev 0x0103), RF RT2820 (MIMO 2T3R), address [_MAC_XXXXXXXXXX] uhub4: 8 ports with 8 removable, self powered ada0 at ata0 bus 0 scbus5 target 0 lun 0 ada0: <Maxtor 6Y160L0 YAR41BW0> ATA-7 device ada0: [_SERIAL_NUMBER_XXXXX] ada0: 133.000MB/s transfers (UDMA6, PIO 8192bytes) ada0: 156334MB (320173056 512 byte sectors) cd0 at ata1 bus 0 scbus6 target 0 lun 0 cd0: < 16X10X32 CD-RW 1.03> Removable CD-ROM SCSI device cd0: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes) cd0: Attempt to query device size failed: NOT READY, Medium not present Trying to mount root from ufs:/dev/ada0s1a [rw]...