Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2020-02-26 14:41:04
From: yamajun
Description: FreeBSD/amd64 12.1-RELEASE on Topjoy Falcon
---<<BOOT>>--- Copyright (c) 1992-2019 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 12.1-RELEASE r354233 GENERIC amd64 FreeBSD clang version 8.0.1 (tags/RELEASE_801/final 366581) (based on LLVM 8.0.1) VT(efifb): resolution 600x800 Skipping TSC calibration since no legacy devices reported by FADT and CPUID works CPU: Intel(R) Pentium(R) Silver J5005 CPU @ 1.50GHz (1497.60-MHz K8-class CPU) Origin="GenuineIntel" Id=0x706a1 Family=0x6 Model=0x7a Stepping=1 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x4ff8ebbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,RDRAND> AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> AMD Features2=0x101<LAHF,Prefetch> Structured Extended Features=0x2294e287<FSGSBASE,TSCADJ,SGX,SMEP,ERMS,NFPUSG,MPX,PQE,RDSEED,SMAP,CLFLUSHOPT,PROCTRACE,SHA> Structured Extended Features2=0x40400004<UMIP,RDPID,SGXLC> Structured Extended Features3=0xac000400<MD_CLEAR,IBPB,STIBP,ARCH_CAP,SSBD> XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> IA32_ARCH_CAPS=0x6a<IBRS_ALL,SKIP_L1DFL_VME> VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr TSC: P-state invariant, performance statistics real memory = 8589934592 (8192 MB) avail memory = 8061276160 (7687 MB) Event timer "LAPIC" quality 600 ACPI APIC Table: <INTEL GLK-SOC > WARNING: L1 data cache covers fewer APIC IDs than a core (0 < 1) FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs FreeBSD/SMP: 1 package(s) x 4 core(s) arc4random: no preloaded entropy cache ioapic0 <Version 2.0> irqs 0-119 on motherboard Launching APs: 3 2 1 Timecounter "TSC" frequency 1497600000 Hz quality 1000 random: entropy device external interface kbd1 at kbdmux0 000.000023 [4335] netmap_init netmap: loaded module [ath_hal] loaded module_register_init: MOD_LOAD (vesa, 0xffffffff8112e050, 0) error 19 random: registering fast source Intel Secure Key RNG random: fast provider: "Intel Secure Key RNG" nexus0 efirtc0: <EFI Realtime Clock> on motherboard efirtc0: registered as a time-of-day clock, resolution 1.000000s cryptosoft0: <software crypto> on motherboard acpi0: <ALASKA A M I > on motherboard Firmware Error (ACPI): Failure creating [\134_SB.PCI0.TCPU._ADR], AE_ALREADY_EXISTS (20181213/dswload2-477) ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20181213/psobject-372) unknown: I/O range not supported ACPI Error: No handler for Region [ECF2] (0xfffff80003692980) [EmbeddedControl] (20181213/evregion-288) ACPI Error: Region EmbeddedControl (ID=3) has no handler (20181213/exfldio-428) ACPI Error: Method parse/execution failed \134_SB.PCI0.SBRG.H_EC.BAT0._STA, AE_NOT_EXIST (20181213/psparse-689) cpu0: <ACPI CPU> on acpi0 attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0 atrtc0: Warning: Couldn't map I/O. atrtc0: registered as a time-of-day clock, resolution 1.000000s Event timer "RTC" frequency 32768 Hz quality 0 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 8 on acpi0 Timecounter "HPET" frequency 19200000 Hz quality 950 Event timer "HPET" frequency 19200000 Hz quality 550 Event timer "HPET1" frequency 19200000 Hz quality 440 Event timer "HPET2" frequency 19200000 Hz quality 440 Event timer "HPET3" frequency 19200000 Hz quality 440 Event timer "HPET4" frequency 19200000 Hz quality 440 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <32-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 acpi_ec0: <Embedded Controller: GPE 0x26> port 0x62,0x66 on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pcib0: Length mismatch for 3 range: 1 vs 1000000010000 pci0: <ACPI PCI bus> on pcib0 vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xa0000000-0xa0ffffff,0x90000000-0x9fffffff at device 2.0 on pci0 vgapci0: Boot video device hdac0: <Intel (0x3198) HDA Controller> mem 0xa1210000-0xa1213fff,0xa1000000-0xa10fffff irq 25 at device 14.0 on pci0 pci0: <simple comms> at device 15.0 (no driver attached) ahci0: <AHCI SATA controller> port 0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0xa1214000-0xa1215fff,0xa1238000-0xa12380ff,0xa1237000-0xa12377ff at device 18.0 on pci0 ahci0: AHCI v1.31 with 2 6Gbps ports, Port Multiplier supported ahcich0: <AHCI channel> at channel 0 on ahci0 ahcich1: <AHCI channel> at channel 1 on ahci0 pcib1: <ACPI PCI-PCI bridge> at device 19.0 on pci0 pci1: <ACPI PCI bus> on pcib1 pci1: <network> at device 0.0 (no driver attached) xhci0: <XHCI (generic) USB 3.0 controller> mem 0xa1200000-0xa120ffff irq 17 at device 21.0 on pci0 xhci0: 32 bytes context size, 64-bit DMA usbus0 on xhci0 usbus0: 5.0Gbps Super Speed USB v3.0 sdhci_pci0: <Generic SD HCI> mem 0xa121a000-0xa121afff,0xa1219000-0xa1219fff irq 39 at device 28.0 on pci0 sdhci_pci0: 1 slot(s) allocated mmc0: <MMC/SD bus> on sdhci_pci0 sdhci_pci1: <Generic SD HCI> mem 0xa1218000-0xa1218fff,0xa1217000-0xa1217fff irq 42 at device 30.0 on pci0 sdhci_pci1: 1 slot(s) allocated mmc1: <MMC/SD bus> on sdhci_pci1 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 acpi_button0: <Power Button> on acpi0 acpi_tz0: <Thermal Zone> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] acpi_acad0: <AC Adapter> on acpi0 battery0: <ACPI Control Method Battery> on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 est0: <Enhanced SpeedStep Frequency Control> on cpu0 Timecounters tick every 1.000 msec arc4random: no preloaded entropy cache hdacc0: <Realtek ALC269 HDA CODEC> at cad 0 on hdac0 hdaa0: <Realtek ALC269 Audio Function Group> at nid 1 on hdacc0 pcm0: <Realtek ALC269 (Analog)> at nid 20 and 24 on hdaa0 pcm1: <Realtek ALC269 (Analog)> at nid 21 and 18 on hdaa0 hdacc1: <Intel (0x280d) HDA CODEC> at cad 2 on hdac0 hdaa1: <Intel (0x280d) Audio Function Group> at nid 1 on hdacc1 pcm2: <Intel (0x280d) (HDMI/DP 8ch)> at nid 3 on hdaa1 ugen0.1: <0x8086 XHCI root HUB> at usbus0 uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 mmc0: No compatible cards found on bus mmc1: No compatible cards found on bus ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 ada0: <Netac SSD 256GB R0522A0> ACS-2 ATA SATA 3.x device ada0: [_SERIAL_NUMBER_XXXXXXXXXXXXXXXXX] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) ada0: Command Queueing enabled ada0: 244198MB (500118192 512 byte sectors) Trying to mount root from cd9660:/dev/iso9660/12_1_RELEASE_AMD64_CD [ro]... Root mount waiting for: usbus0 uhub0: 16 ports with 16 removable, self powered Root mount waiting for: usbus0 ugen0.2: <vendor 0x8087 product 0x0a2a> at usbus0 Root mount waiting for: usbus0 Root mount waiting for: usbus0 ugen0.4: <HAILUCK CO.,LTD USB KEYBOARD> at usbus0 ukbd0 on uhub0 ukbd0: <HAILUCK CO.,LTD USB KEYBOARD, class 0/0, rev 1.10/1.00, addr 3> on usbus0 kbd2 at ukbd0 hid_get_item: Number of items(1039) truncated to 1024 mountroot: waiting for device /dev/iso9660/12_1_RELEASE_AMD64_CD... random: unblocking device. arc4random: no preloaded entropy cache arc4random: no preloaded entropy cache lo0: link state changed to UP iwm0: <Intel(R) Dual Band Wireless AC 3165> mem 0xa1100000-0xa1101fff at device 0.0 on pci1 iwm0: hw rev 0x210, fw ver 22.361476.0, address [_MAC_XXXXXXXXXX] ubt0 on uhub0 ubt0: <vendor 0x8087 product 0x0a2a, class 224/1, rev 2.00/0.01, addr 1> on usbus0 hid_get_item: Number of items(1039) truncated to 1024 hid_get_item: Number of items(1039) truncated to 1024 hid_get_item: Number of items(1039) truncated to 1024 hid_get_item: Number of items(1039) truncated to 1024 hid_get_item: Number of items(1039) truncated to 1024 uhid0 on uhub0 uhid0: <HAILUCK CO.,LTD USB KEYBOARD, class 0/0, rev 1.10/1.00, addr 3> on usbus0 hid_get_item: Number of items(1039) truncated to 1024 hid_get_item: Number of items(1039) truncated to 1024 hid_get_item: Number of items(1039) truncated to 1024 WARNING: attempt to domain_add(bluetooth) after domainfinalize() WARNING: attempt to domain_add(netgraph) after domainfinalize() ubt0: ubt_ctrl_write_callback:906: control transfer failed: USB_ERR_TIMEOUT ng_hci_process_command_timeout: ubt0hci - unable to complete HCI command OGF=0x3, OCF=0x3. Timeout