Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2020-03-24 07:53:22
From: yamori813
Description: SophiaDigital_ARecX6
---<<BOOT>>---
KDB: debugger backends: ddb
KDB: current backend: ddb
Copyright (c) 1992-2020 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 12.1-STABLE #2 9c6eed97e20(stable/12)-dirty: Tue Mar 24 16:21:34 JST 2020
hiroki@zrouter:/usr/home/hiroki/zobj/usr/home/hiroki/ZRouter/tmp/usr/home/hiroki/freebsd/arm.arm/sys/SophiaDigital_ARecX6 arm
FreeBSD clang version 9.0.1 ([_EMAIL_XXXXX]:llvm/llvm-project.git c1a0a213378a458fbea1a5c77b315c7dce08fd05) (based on LLVM 9.0.1)
CPU: Feroceon 88FR131 rev 1 (**unknown 4** core)
Little-endian DC enabled IC enabled WA disabled DC streaming enabled
BTB disabled L2 enabled L2 prefetch enabled
WB enabled LABT branch prediction enabled
16KB/32B 4-way instruction cache
16KB/32B 4-way write-back-locking-C data cache
real memory = 536866816 (511 MB)
avail memory = 519495680 (495 MB)
arc4random: no preloaded entropy cache
random: entropy device external interface
ofwbus0: <Open Firmware Device Tree>
simplebus0: <Flattened device tree simple bus> on ofwbus0
gpio0: <Marvell Integrated GPIO Controller> mem 0x10100-0x1011f irq 35,36,37,38,39,40,41 on simplebus0
gpio0: ERROR: no pin-count or ngpios entry found!
device_attach: gpio0 attach returned 6
cpulist0: <Open Firmware CPU Group> on ofwbus0
cpu0: <Open Firmware CPU> on cpulist0
localbus0: <Marvell device bus> on ofwbus0
nand0: <Marvell NAND controller> mem 0xf9300000-0xf93fffff on localbus0
nandbus0: <NAND bus> on nand0
lnand0: <Samsung NAND 512MiB 3,3V 8-bit> on nandbus0
lnand0: Found BBT table for chip
ic0: <Marvell Integrated Interrupt Controller> mem 0x20200-0x2023b on simplebus0
timer0: <Marvell CPU Timer> mem 0x20300-0x2032f irq 1 on simplebus0
Event timer "CPUTimer0" frequency 200000000 Hz quality 1000
Timecounter "CPUTimer1" frequency 200000000 Hz quality 1000
gpio0: <Marvell Integrated GPIO Controller> mem 0x10100-0x1011f irq 35,36,37,38,39,40,41 on simplebus0
gpio0: ERROR: no pin-count or ngpios entry found!
device_attach: gpio0 attach returned 6
rtc0: <Marvell Integrated RTC> mem 0x10300-0x10307 on simplebus0
rtc0: registered as a time-of-day clock, resolution 1.000000s
twsi0: <Marvell Integrated I2C Bus Controller> mem 0x11000-0x1101f irq 43 on simplebus0
iicbus0: <OFW I2C bus> on twsi0
iic0: <I2C generic I/O> on iicbus0
mge0: <Marvell Gigabit Ethernet controller> mem 0x72000-0x73fff irq 12,13,14,11,46 on simplebus0
mge0: PHY8 attached, phy_sc points to mge0
mge0: Ethernet address: [_MAC_XXXXXXXXXX]
miibus0: <MII bus> on mge0
e1000phy0: <Marvell 88E1116R Gigabit PHY> PHY 8 on miibus0
e1000phy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto
uart0: <16550 or compatible> mem 0x12000-0x1201f irq 33 on simplebus0
uart0: console (1056,n,8,1)
uart1: <16550 or compatible> mem 0x12100-0x1211f irq 34 on simplebus0
cesa0: <Marvell Cryptographic Engine and Security Accelerator> mem 0x30000-0x30fff,0x3d000-0x3dfff irq 22 on simplebus0
ehci0: <Marvell Integrated USB 2.0 controller> mem 0x50000-0x50fff irq 48,19 on simplebus0
usbus0: EHCI version 1.0
usbus0 on ehci0
mvs0: <Marvell 88F6281 SATA controller> mem 0x80000-0x85fff irq 21 on simplebus0
mvs0: Gen-IIe, 2 3Gbps ports, Port Multiplier supported with FBS
mvsch0: <Marvell SATA channel> at channel 0 on mvs0
mvsch1: <Marvell SATA channel> at channel 1 on mvs0
cryptosoft0: <software crypto>
Timecounters tick every 10.000 msec
usbus0: 480Mbps High Speed USB v2.0
ugen0.1: <Marvell EHCI root HUB> at usbus0
uhub0: <Marvell EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
Trying to mount root from cd9660:/dev/da0s2 []...
Root mount waiting for: usbus0 CAM
uhub0: 1 port with 1 removable, self powered
Root mount waiting for: usbus0
ugen0.2: <vendor 0x05e3 USB2.0 Hub> at usbus0
uhub1 on uhub0
uhub1: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/77.32, addr 2> on usbus0
uhub1: MTT enabled
Root mount waiting for: usbus0
uhub1: 4 ports with 3 removable, self powered
Root mount waiting for: usbus0
ugen0.3: <vendor 0x05e3 USB2.0 Hub> at usbus0
uhub2 on uhub1
uhub2: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/77.32, addr 3> on usbus0
uhub2: MTT enabled
uhub2: 4 ports with 4 removable, self powered
Root mount waiting for: usbus0
ugen0.4: <MDTV Receiver MDTV Receiver> at usbus0
Root mount waiting for: usbus0
ugen0.5: <MDTV Receiver MDTV Receiver> at usbus0
ugen0.6: <MDTV Receiver MDTV Receiver> at usbus0
Root mount waiting for: usbus0
Root mount waiting for: usbus0
ugen0.7: <TOSHIBA THNU2128H> at usbus0
umass0 on uhub2
umass0: <TOSHIBA THNU2128H, class 0/0, rev 2.00/1.00, addr 7> on usbus0
da0 at umass-sim0 bus 0 scbus2 target 0 lun 0
da0: <HAGIWARA USB Flash Memory 2.00> Removable Direct Access SCSI-2 device
da0: [_SERIAL_NUMBER_XXXXXXXXXXXX]
da0: 40.000MB/s transfers
da0: 123MB (251904 512 byte sectors)
da0: quirks=0x2<NO_6_BYTE>
ugen0.8: <MDTV Receiver MDTV Receiver> at usbus0
Root mount waiting for: usbus0
ugen0.9: <MDTV Receiver MDTV Receiver> at usbus0
ugen0.10: <MDTV Receiver MDTV Receiver> at usbus0
mountroot: waiting for device /dev/da0s2...
random: unblocking device.
lo0: link state changed to UP
/tmp: optimization changed from SPACE to TIME