Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2020-05-05 04:10:14
From: ashafer
Description: Acer Aspire 1 A114-32-P7E5
---<<BOOT>>---
Copyright (c) 1992-2020 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 13.0-CURRENT #0 r360479: Thu Apr 30 04:29:02 UTC 2020
[_EMAIL_XXXXXXXXXXXXXXXXXXX]:/usr/obj/usr/src/amd64.amd64/sys/GENERIC amd64
FreeBSD clang version 10.0.0 ([_EMAIL_XXXXX]:llvm/llvm-project.git llvmorg-10.0.0-0-gd32170dbd5b)
WARNING: WITNESS option enabled, expect reduced performance.
VT(efifb): resolution 1366x768
CPU: Intel(R) Pentium(R) Silver N5000 CPU @ 1.10GHz (1094.45-MHz K8-class CPU)
Origin="GenuineIntel" Id=0x706a1 Family=0x6 Model=0x7a Stepping=1
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x4ff8ebbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,RDRAND>
AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
AMD Features2=0x101<LAHF,Prefetch>
Structured Extended Features=0x2294e287<FSGSBASE,TSCADJ,SGX,SMEP,ERMS,NFPUSG,MPX,PQE,RDSEED,SMAP,CLFLUSHOPT,PROCTRACE,SHA>
Structured Extended Features2=0x40400004<UMIP,RDPID,SGXLC>
Structured Extended Features3=0xac000000<IBPB,STIBP,ARCH_CAP,SSBD>
XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
IA32_ARCH_CAPS=0xa<IBRS_ALL,SKIP_L1DFL_VME>
VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr
TSC: P-state invariant, performance statistics
real memory = 4294967296 (4096 MB)
avail memory = 3878043648 (3698 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <ACRSYS ACRPRDCT>
WARNING: L1 data cache covers fewer APIC IDs than a core (0 < 1)
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s)
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
random: unblocking device.
ioapic0 <Version 2.0> irqs 0-119
Launching APs: 1 2 3
Timecounter "TSC" frequency 1094451632 Hz quality 1000
random: entropy device external interface
WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 13.0.
kbd1 at kbdmux0
000.000044 [4342] netmap_init netmap: loaded module
[ath_hal] loaded
nexus0
efirtc0: <EFI Realtime Clock>
efirtc0: registered as a time-of-day clock, resolution 1.000000s
cryptosoft0: <software crypto>
acpi0: <ACRSYS ACRPRDCT>
acpi0: Power Button (fixed)
unknown: I/O range not supported
cpu0: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0
atrtc0: Warning: Couldn't map I/O.
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 8 on acpi0
Timecounter "HPET" frequency 19200000 Hz quality 950
Event timer "HPET" frequency 19200000 Hz quality 550
Event timer "HPET1" frequency 19200000 Hz quality 440
Event timer "HPET2" frequency 19200000 Hz quality 440
Event timer "HPET3" frequency 19200000 Hz quality 440
Event timer "HPET4" frequency 19200000 Hz quality 440
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x25> port 0x62,0x66 on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib0: no PRT entry for 0.0.INTA
vgapci0: <VGA-compatible display> port 0x2000-0x203f mem 0xa0000000-0xa0ffffff,0x90000000-0x9fffffff at device 2.0 on pci0
vgapci0: Boot video device
hdac0: <Intel Gemini Lake HDA Controller> mem 0xa1410000-0xa1413fff,0xa1200000-0xa12fffff irq 25 at device 14.0 on pci0
pci0: <simple comms> at device 15.0 (no driver attached)
ahci0: <AHCI SATA controller> port 0x2080-0x2087,0x2088-0x208b,0x2060-0x207f mem 0xa1414000-0xa1415fff,0xa141e000-0xa141e0ff,0xa141c000-0xa141c7ff at device 18.0 on pci0
ahci0: AHCI v1.31 with 2 6Gbps ports, Port Multiplier supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
pcib1: <ACPI PCI-PCI bridge> at device 19.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 19.2 on pci0
pcib2: failed to allocate initial I/O port window: 0x1000-0x1fff
pci2: <ACPI PCI bus> on pcib2
pci2: <unknown> at device 0.0 (no driver attached)
re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0x3000-0x30ff mem 0xa1304000-0xa1304fff,0xa1300000-0xa1303fff at device 0.1 on pci2
re0: Using 1 MSI-X message
re0: ASPM disabled
re0: Chip rev. 0x5c800000
re0: MAC rev. 0x00000000
miibus0: <MII bus> on re0
rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0
rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re0: Using defaults for TSO: 65518/35/2048
re0: Ethernet address: [_MAC_XXXXXXXXXX]
re0: netmap queues/slots: TX 1/256, RX 1/256
pcib3: <ACPI PCI-PCI bridge> at device 19.3 on pci0
pci3: <ACPI PCI bus> on pcib3
pci3: <network> at device 0.0 (no driver attached)
xhci0: <XHCI (generic) USB 3.0 controller> mem 0xa1400000-0xa140ffff irq 17 at device 21.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
usbus0: waiting for BIOS to give up control
xhci_interrupt: host controller halted
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
sdhci_pci0: <Generic SD HCI> mem 0xa141a000-0xa141afff,0xa141b000-0xa141bfff irq 39 at device 28.0 on pci0
sdhci_pci0: 1 slot(s) allocated
mmc0: <MMC/SD bus> on sdhci_pci0
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
acpi_acad0: <AC Adapter> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
WARNING: Device "psm" is Giant locked and may be deleted before FreeBSD 13.0.
psm0: model Elantech Touchpad, device ID 0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
ZFS NOTICE: Prefetch is disabled by default if less than 4GB of RAM is present;
to enable, add "vfs.zfs.prefetch_disable=0" to /boot/loader.conf.
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
Obsolete code will be removed soon: random(9) is the obsolete Park-Miller LCG from 1988
ugen0.1: <0x8086 XHCI root HUB> at usbus0
hdacc0: <Realtek ALC255 HDA CODEC> at cad 0 on hdac0
hdaa0: <Realtek ALC255 Audio Function Group> at nid 1 on hdacc0
pcm0: <Realtek ALC255 (Internal Analog)> at nid 20 and 18 on hdaa0
pcm1: <Realtek ALC255 (Front Analog Headphones)> at nid 33 on hdaa0
hdacc1: <Intel Geminilake HDA CODEC> at cad 2 on hdac0
hdaa1: <Intel Geminilake Audio Function Group> at nid 1 on hdacc1
pcm2: <Intel Geminilake (HDMI/DP 8ch)> at nid 3 on hdaa1
uhub0 on usbus0
uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
mmcsd0: 63GB <MMCHC DA4064 0.1 SN EE12593F MFG 05/2019 by 69 0x0000> at mmc0 200.0MHz/8bit/8192-block
mmcsd0boot0: 4MB partition 1 at mmcsd0
mmcsd0boot1: 4MB partition 2 at mmcsd0
mmcsd0rpmb: 17MB partition 3 at mmcsd0
Trying to mount root from zfs:zroot/ROOT/default []...
WARNING: WITNESS option enabled, expect reduced performance.
Root mount waiting for: usbus0
uhub0: 16 ports with 16 removable, self powered
Root mount waiting for: usbus0
ugen0.2: <USB Flash Disk> at usbus0
umass0 on uhub0
umass0: <USB Flash Disk, class 0/0, rev 2.00/1.00, addr 1> on usbus0
umass0: SCSI over Bulk-Only; quirks = 0x4101
umass0:2:0: Attached to scbus2
da0 at umass-sim0 bus 0 scbus2 target 0 lun 0
da0: <USB Flash Disk 8.07> Removable Direct Access SPC-2 SCSI device
da0: [_SERIAL_NUMBER_XXXXX]
da0: 40.000MB/s transfers
da0: 7640MB (15646720 512 byte sectors)
da0: quirks=0x2<NO_6_BYTE>
ugen0.3: <vendor 0x04ca product 0x3015> at usbus0
Root mount waiting for: usbus0
ugen0.4: <Quanta VGA WebCam> at usbus0
lo0: link state changed to UP
re0: link state changed to UP
ubt0 on uhub0
ubt0: <vendor 0x04ca product 0x3015, class 224/1, rev 2.01/0.01, addr 2> on usbus0
WARNING: attempt to domain_add(bluetooth) after domainfinalize()
WARNING: attempt to domain_add(netgraph) after domainfinalize()
re0: link state changed to DOWN
re0: link state changed to UP