Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].


Date: 2020-05-11 19:05:10
From: Andrew
Description: FreeBSD on Amazon AWS m6g.medium
KDB: debugger backends: ddb
KDB: current backend: ddb
Copyright (c) 1992-2020 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 13.0-CURRENT #0 r360723: Thu May  7 03:50:27 UTC 2020
    [_EMAIL_XXXXXXXXXXXXXXXXXXX]:/usr/obj/usr/src/arm64.aarch64/sys/GENERIC arm64
FreeBSD clang version 10.0.0 ([_EMAIL_XXXXX]:llvm/llvm-project.git llvmorg-10.0.0-0-gd32170dbd5b)
WARNING: WITNESS option enabled, expect reduced performance.
VT: init without driver.
module firmware already present!
FreeBSD/SMP: Multiprocessor System Detected: 1 CPUs
arc4random: WARNING: initial seeding bypassed the cryptographic random device because it was not yet seeded and the knob 'bypass_before_seeding' was enabled.
random: entropy device external interface
MAP 7c2e0000 mode 2 pages 272
MAP 7f6d0000 mode 2 pages 144
MAP 7f780000 mode 2 pages 272
MAP 9010000 mode 0 pages 1
WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 13.0.
kbd0 at kbdmux0
WARNING: Device "openfirm" is Giant locked and may be deleted before FreeBSD 13.0.
acpi0: <AMAZON AMZNFACP>
acpi0: Power Button (fixed)
acpi0: Sleep Button (fixed)
acpi0: Could not update all GPEs: AE_NOT_CONFIGURED
psci0: <ARM Power State Co-ordination Interface Driver> on acpi0
gic0: <ARM Generic Interrupt Controller v3.0> iomem 0x10000000-0x1001ffff,0x10200000-0x1ffeffff on acpi0
its0: <ARM GIC Interrupt Translation Service> on gic0
generic_timer0: <ARM Generic Timer> irq 33,34,35 on acpi0
Timecounter "ARM MPCore Timecounter" frequency 121875000 Hz quality 1000
Event timer "ARM MPCore Eventtimer" frequency 121875000 Hz quality 1000
efirtc0: <EFI Realtime Clock>
efirtc0: registered as a time-of-day clock, resolution 1.000000s
cpu0: <ACPI CPU> on acpi0
pcib0: <Generic PCI host controller> on acpi0
pci0: <PCI bus> on pcib0
uart0: <Amazon PCI serial device> mem 0x80118000-0x80118fff at device 1.0 on pci0
pci0: <old, non-VGA display device> at device 2.0 (no driver attached)
pci0: <old, non-VGA display device> at device 3.0 (no driver attached)
nvme0: <Generic NVMe Device> mem 0x80114000-0x80117fff irq 36 at device 4.0 on pci0
ena0: <ENA adapter> mem 0x80110000-0x80113fff,0x80000000-0x800fffff,0x80100000-0x8010ffff irq 37 at device 5.0 on pci0
ena0: Elastic Network Adapter (ENA)ena v2.1.1
ena0: Placement policy: Low Latency
ena0: Creating 1 io queues. Rx queue size: 1024, Tx queue size: 1024
ena0: Ethernet address: [_MAC_XXXXXXXXXX]
pci0: <old, non-VGA display device> at device 6.0 (no driver attached)
pci0: <old, non-VGA display device> at device 7.0 (no driver attached)
pci0: <old, non-VGA display device> at device 8.0 (no driver attached)
pci0: <old, non-VGA display device> at device 9.0 (no driver attached)
pci0: <old, non-VGA display device> at device 10.0 (no driver attached)
pci0: <old, non-VGA display device> at device 11.0 (no driver attached)
pci0: <old, non-VGA display device> at device 12.0 (no driver attached)
pci0: <old, non-VGA display device> at device 13.0 (no driver attached)
pci0: <old, non-VGA display device> at device 14.0 (no driver attached)
pci0: <old, non-VGA display device> at device 15.0 (no driver attached)
pci0: <old, non-VGA display device> at device 16.0 (no driver attached)
pci0: <old, non-VGA display device> at device 17.0 (no driver attached)
pci0: <old, non-VGA display device> at device 18.0 (no driver attached)
pci0: <old, non-VGA display device> at device 19.0 (no driver attached)
pci0: <old, non-VGA display device> at device 20.0 (no driver attached)
pci0: <old, non-VGA display device> at device 21.0 (no driver attached)
pci0: <old, non-VGA display device> at device 22.0 (no driver attached)
pci0: <old, non-VGA display device> at device 23.0 (no driver attached)
pci0: <old, non-VGA display device> at device 24.0 (no driver attached)
pci0: <old, non-VGA display device> at device 25.0 (no driver attached)
pci0: <old, non-VGA display device> at device 26.0 (no driver attached)
pci0: <old, non-VGA display device> at device 27.0 (no driver attached)
pci0: <old, non-VGA display device> at device 28.0 (no driver attached)
pci0: <old, non-VGA display device> at device 29.0 (no driver attached)
pci0: <old, non-VGA display device> at device 30.0 (no driver attached)
pci0: <old, non-VGA display device> at device 31.0 (no driver attached)
acpi_button0: <Power Button> on acpi0
cryptosoft0: <software crypto>
Timecounters tick every 1.000 msec
ena0: link is UP
ena0: link state changed to UP
Obsolete code will be removed soon: random(9) is the obsolete Park-Miller LCG from 1988
usb_needs_explore_all: no devclass
nvme0: temperature threshold not supported
CPU  0: ARM Neoverse-N1 r3p1 affinity:  0
                   Cache Type = <64 byte D-cacheline,64 byte I-cacheline,PIPT ICache,64 byte ERG,64 byte CWG,IDC,DIC>
 Instruction Set Attributes 0 = <DP,RDM,Atomic,CRC32,SHA2,SHA1,AES+PMULL>
 Instruction Set Attributes 1 = <LRCPC,DPB>
         Processor Features 0 = <CSV3,CSV2,RASv1,GIC,AdvSIMD+HP,FP+HP,EL3,EL2,EL1,EL0 32>
         Processor Features 1 = <PSTATE.SSBS MSR>
      Memory Model Features 0 = <TGran4,TGran64,TGran16,SNSMem,BigEnd,16bit ASID,256TB PA>
      Memory Model Features 1 = <PAN+ATS1E1,LO,HPD+TTPBHA,VH,16bit VMID,HAF+DS>
      Memory Model Features 2 = <32bit CCIDX,48bit VA,UAO,CnP>
             Debug Features 0 = <SPE,2 CTX BKPTs,4 Watchpoints,6 Breakpoints,PMUv3+16 bit evtCount,Debugv8.2>
             Debug Features 1 = <>
         Auxiliary Features 0 = <>
         Auxiliary Features 1 = <>
WARNING: WITNESS option enabled, expect reduced performance.
Trying to mount root from ufs:/dev/ufs/rootfs [rw]...
Root mount waiting for: CAM
nda0 at nvme0 bus 0 scbus0 target 0 lun 1
nda0: <Amazon Elastic Block Store 1.0 vol02d6464bb18060ac1>
nda0: nvme version 1.0 x0 (max x0) lanes PCIe Gen0 (max Gen0) link
nda0: 20480MB (41943040 512 byte sectors)