Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2020-05-27 07:26:47
From: klaus
Description: FreeBSD-13_RPI4_pcie_fdt_experimental_crowston
U-Boot 2020.04 (May 06 2020 - 20:49:10 +0000)
DRAM: 3.9 GiB
RPI 4 Model B (0xc03111)
MMC: emmc2@7e340000: 0, mmc@7e300000: 1
Loading Environment from FAT... In: serial
Out: vidconsole
Err: vidconsole
Net: eth0: genet@7d580000
Hit any key to stop autoboot: 0
switch to partitions #0, OK
mmc0 is current device
Scanning mmc 0:1...
Found EFI removable media binary efi/boot/bootaa64.efi
libfdt fdt_check_header(): FDT_ERR_BADMAGIC
Scanning disk [_EMAIL_XXXXXXXXX]...
** Unrecognized filesystem type **
Scanning disk [_EMAIL_XXXXXXX]...
Disk [_EMAIL_XXXXXXX] not ready
Found 3 disks
BootOrder not defined
EFI boot manager: Cannot load any image
678800 bytes read in 78 ms (8.3 MiB/s)
libfdt fdt_check_header(): FDT_ERR_BADMAGIC
Consoles: EFI console
Reading loader env vars from /efi/freebsd/loader.env
Setting currdev to disk0p1:
FreeBSD/arm64 EFI loader, Revision 1.1
(Thu Jan 16 07:18:28 UTC 2020 [_EMAIL_XXXXXXXXXXXXXXXXXXX])
Command line arguments: loader.efi
Image base: 0x39e8f000
EFI version: 2.80
EFI Firmware: Das U-Boot (rev 8224.1024)
Console: efi (0x1000)
Load Path: /efi\boot\bootaa64.efi
Load Device: /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/SD(0)/SD(0)/HD(1,0x01,0,0x81f,0x18fa8)
Trying ESP: /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/SD(0)/SD(0)/HD(1,0x01,0,0x81f,0x18fa8)
Setting currdev to disk0p1:
Trying: /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/SD(0)/SD(0)/HD(2,0x01,0,0x197c7,0x76da839)
Setting currdev to disk0p2:
Loading /boot/defaults/loader.conf
Loading /boot/defaults/loader.conf
Loading /boot/device.hints
Loading /boot/loader.conf
Loading /boot/loader.conf.local
Loading kernel...
/boot/kernel/kernel text=0xa492ec data=0x190358 data=0x0+0x30173e syms=[0x8+0x10cc20+0x8+0x132d35]
Loading configured modules...
/boot/entropy size=0x1000
/etc/hostid size=0x25
/boot/kernel/umodem.ko text=0x1be0 text=0xfb0 data=0x618+0x8 syms=[0x8+0xe40+0x8+0xa8c]
Hit [Enter] to boot immediately, or any other key for command prompt.
Booting [/boot/kernel/kernel]...
Using DTB provided by EFI at 0x7ef2000.
EFI framebuffer information:
addr, size 0x3e4e0000, 0x6d8c00
dimensions 1824 x 984
stride 1824
masks 0x00ff0000, 0x0000ff00, 0x000000ff, 0xff000000
---<<BOOT>>---
KDB: debugger backends: ddb
KDB: current backend: ddb
Copyright (c) 1992-2020 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 13.0-CURRENT #18 53d07242e9a-c268943(master): Sun Apr 26 14:14:27 UTC 2020
root@generic:/usr/obj/usr/src/arm64.aarch64/sys/GENERIC-NODEBUG arm64
FreeBSD clang version 10.0.1 ([_EMAIL_XXXXX]:llvm/llvm-project.git llvmorg-10.0.1-rc1-0-gf79cd71e145)
VT(efifb): resolution 1824x984
module firmware already present!
KLD file umodem.ko is missing dependencies
module_register: cannot register simplebus/pcib from kernel; already loaded from kernel
Module simplebus/pcib failed to register: 17
Starting CPU 1 (1)
Starting CPU 2 (2)
Starting CPU 3 (3)
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
random: unblocking device.
random: entropy device external interface
MAP 39f3d000 mode 2 pages 1
MAP 39f46000 mode 2 pages 2
MAP 3b350000 mode 2 pages 16
MAP fe100000 mode 0 pages 1
WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 13.0.
kbd0 at kbdmux0
WARNING: Device "openfirm" is Giant locked and may be deleted before FreeBSD 13.0.
ofwbus0: <Open Firmware Device Tree>
simplebus0: <Flattened device tree simple bus> on ofwbus0
ofw_clkbus0: <OFW clocks bus> on ofwbus0
clk_fixed0: <Fixed clock> on ofw_clkbus0
clk_fixed1: <Fixed clock> on ofw_clkbus0
simplebus1: <Flattened device tree simple bus> on ofwbus0
simplebus2: <Flattened device tree simple bus> on ofwbus0
regfix0: <Fixed Regulator> on ofwbus0
regfix1: <Fixed Regulator> on ofwbus0
regfix2: <Fixed Regulator> on ofwbus0
psci0: <ARM Power State Co-ordination Interface Driver> on ofwbus0
gic0: <ARM Generic Interrupt Controller> mem 0x40041000-0x40041fff,0x40042000-0x40043fff,0x40044000-0x40045fff,0x40046000-0x40047fff irq 46 on simplebus0
gic0: pn 0x2, arch 0x2, rev 0x1, implementer 0x43b irqs 256
gpio0: <BCM2708/2835 GPIO controller> mem 0x7e200000-0x7e2000b3 irq 22,23 on simplebus0
gpiobus0: <OFW GPIO bus> on gpio0
gpioregulator0: <GPIO controlled regulator> on ofwbus0
gpioregulator0: cannot get pin 0
gpioregulator0: cannot parse parameters
device_attach: gpioregulator0 attach returned 6
generic_timer0: <ARMv7 Generic Timer> irq 4,5,6,7 on ofwbus0
Timecounter "ARM MPCore Timecounter" frequency 54000000 Hz quality 1000
Event timer "ARM MPCore Eventtimer" frequency 54000000 Hz quality 1000
gpioregulator0: <GPIO controlled regulator> on ofwbus0
gpioregulator0: cannot get pin 0
gpioregulator0: cannot parse parameters
device_attach: gpioregulator0 attach returned 6
gpioregulator0: <GPIO controlled regulator> on ofwbus0
gpioregulator0: cannot get pin 0
gpioregulator0: cannot parse parameters
device_attach: gpioregulator0 attach returned 6
gpioregulator0: <GPIO controlled regulator> on ofwbus0
gpioregulator0: cannot get pin 0
gpioregulator0: cannot parse parameters
device_attach: gpioregulator0 attach returned 6
gpioregulator0: <GPIO controlled regulator> on ofwbus0
gpioregulator0: cannot get pin 0
gpioregulator0: cannot parse parameters
device_attach: gpioregulator0 attach returned 6
usb_nop_xceiv0: <USB NOP PHY> on ofwbus0
gpioregulator0: <GPIO controlled regulator> on ofwbus0
gpioregulator0: cannot get pin 0
gpioregulator0: cannot parse parameters
device_attach: gpioregulator0 attach returned 6
bcm_dma0: <BCM2835 DMA Controller> mem 0x7e007000-0x7e007aff irq 9,10,11,12,13,14,15,16,17,18,19 on simplebus0
bcmwd0: <BCM2708/2835 Watchdog> mem 0x7e100000-0x7e100113,0x7e00a000-0x7e00a023,0x7ec11000-0x7ec1101f on simplebus0
mbox0: <BCM2835 VideoCore Mailbox> mem 0x7e00b880-0x7e00b8bf irq 21 on simplebus0
gpioc0: <GPIO controller> on gpio0
uart0: <PrimeCell UART (PL011)> mem 0x7e201000-0x7e2011ff irq 24 on simplebus0
uart0: console (115200,n,8,1)
spi0: <BCM2708/2835 SPI controller> mem 0x7e204000-0x7e2041ff irq 26 on simplebus0
spibus0: <OFW SPI bus> on spi0
spibus0: <unknown card> at cs 0 mode 0
spibus0: <unknown card> at cs 1 mode 0
iichb0: <BCM2708/2835 BSC controller> mem 0x7e804000-0x7e804fff irq 38 on simplebus0
sdhci_bcm0: <Broadcom 2708 SDHCI controller> mem 0x7e340000-0x7e3400ff irq 60 on simplebus0
mmc0: <MMC/SD bus> on sdhci_bcm0
sdhci_bcm1: <Broadcom 2708 SDHCI controller> mem 0x7e300000-0x7e3000ff irq 61 on simplebus0
mmc1: <MMC/SD bus> on sdhci_bcm1
fb0: <BCM2835 VT framebuffer driver> on simplebus0
fb0: keeping existing fb bpp of 32
fbd0 on fb0
WARNING: Device "fb" is Giant locked and may be deleted before FreeBSD 13.0.
VT: Replacing driver "efifb" with new "fb".
fb0: 1824x984(1824x984@0,0) 32bpp
fb0: fbswap: 1, pitch 7296, base 0x3e4e0000, screen_size 7237632
cpulist0: <Open Firmware CPU Group> on ofwbus0
cpu0: <Open Firmware CPU> on cpulist0
cpu1: <Open Firmware CPU> on cpulist0
cpu2: <Open Firmware CPU> on cpulist0
cpu3: <Open Firmware CPU> on cpulist0
pcib0: <BCM2838-compatible PCI-express controller> mem 0x7d500000-0x7d50930f,0x7e00f300-0x7e00f31f irq 66,67 on simplebus2
pcib0: hardware identifies as revision 0x304.
pci0: <PCI bus> on pcib0
pcib1: <PCI-PCI bridge> irq 77 at device 0.0 on pci0
pcib0: bcm_pcib_alloc_resource FAIL: type=3, rid=36, start=00000000f8000000, end=00000000f80fffff, count=0000000000100000, flags=40
pcib1: failed to allocate initial prefetch window: 0-0xfffff
pci1: <PCI bus> on pcib1
xhci0: <XHCI (generic) USB 3.0 controller> irq 78 at device 0.0 on pci1
xhci0: 32 bytes context size, 64-bit DMA
usbus0 on xhci0
genet0: <RPi4 Gigabit Ethernet> mem 0x7d580000-0x7d58ffff irq 68,69 on simplebus2
genet0: GENET version 5.0 phy 0x0000
miibus0: <MII bus> on genet0
ukphy0: <Generic IEEE 802.3u media interface> PHY 1 on miibus0
ukphy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
genet0: Ethernet address: [_MAC_XXXXXXXXXX]
gpioled0: <GPIO LEDs> on ofwbus0
gpioled0: <led1> failed to map pin
gpioregulator0: <GPIO controlled regulator> on ofwbus0
gpioregulator0: cannot get pin 0
gpioregulator0: cannot parse parameters
device_attach: gpioregulator0 attach returned 6
cryptosoft0: <software crypto>
Timecounters tick every 1.000 msec
Obsolete code will be removed soon: random(9) is the obsolete Park-Miller LCG from 1988
usbus0: 5.0Gbps Super Speed USB v3.0
iicbus0: <OFW I2C bus> on iichb0
iic0: <I2C generic I/O> on iicbus0
ugen0.1: <0x1106 XHCI root HUB> at usbus0
uhub0 on usbus0
uhub0: <0x1106 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
mmcsd0: 64GB <SDHC SN64G 8.0 SN 2B855ED5 MFG 08/2019 by 3 SD> at mmc0 50.0MHz/4bit/65535-block
sdhci_bcm1-slot0: Got command interrupt 0x00030000, but there is no active command.
sdhci_bcm1-slot0: ============== REGISTER DUMP ==============
sdhci_bcm1-slot0: Sys addr: 0x00000000 | Version: 0x00009902
sdhci_bcm1-slot0: Blk size: 0x00000000 | Blk cnt: 0x00000000
sdhci_bcm1-slot0: Argument: 0x000001aa | Trn mode: 0x00000000
sdhci_bcm1-slot0: Present: 0x000f0000 | Host ctl: 0x00000001
sdhci_bcm1-slot0: Power: 0x0000000f | Blk gap: 0x00000000
sdhci_bcm1-slot0: Wake-up: 0x00000000 | Clock: 0x00003947
sdhci_bcm1-slot0: Timeout: 0x00000000 | Int stat: 0x00000000
sdhci_bcm1-slot0: Int enab: 0x01ff00bb | Sig enab: 0x01ff00bb
sdhci_bcm1-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000
sdhci_bcm1-slot0: Caps: 0x00000000 | Caps2: 0x00000000
sdhci_bcm1-slot0: Max curr: 0x00000001 | ADMA err: 0x00000000
sdhci_bcm1-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000
sdhci_bcm1-slot0: ===========================================
sdhci_bcm1-slot0: Got command interrupt 0x00030000, but there is no active command.
sdhci_bcm1-slot0: ============== REGISTER DUMP ==============
sdhci_bcm1-slot0: Sys addr: 0x00000000 | Version: 0x00009902
sdhci_bcm1-slot0: Blk size: 0x00000000 | Blk cnt: 0x00000000
sdhci_bcm1-slot0: Argument: 0x000001aa | Trn mode: 0x00000000
sdhci_bcm1-slot0: Present: 0x000f0000 | Host ctl: 0x00000001
sdhci_bcm1-slot0: Power: 0x0000000f | Blk gap: 0x00000000
sdhci_bcm1-slot0: Wake-up: 0x00000000 | Clock: 0x00003947
sdhci_bcm1-slot0: Timeout: 0x00000000 | Int stat: 0x00000000
sdhci_bcm1-slot0: Int enab: 0x01ff00bb | Sig enab: 0x01ff00bb
sdhci_bcm1-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000
sdhci_bcm1-slot0: Caps: 0x00000000 | Caps2: 0x00000000
sdhci_bcm1-slot0: Max curr: 0x00000001 | ADMA err: 0x00000000
sdhci_bcm1-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000
sdhci_bcm1-slot0: ===========================================
sdhci_bcm1-slot0: Got command interrupt 0x00030000, but there is no active command.
sdhci_bcm1-slot0: ============== REGISTER DUMP ==============
sdhci_bcm1-slot0: Sys addr: 0x00000000 | Version: 0x00009902
sdhci_bcm1-slot0: Blk size: 0x00000000 | Blk cnt: 0x00000000
sdhci_bcm1-slot0: Argument: 0x000001aa | Trn mode: 0x00000000
sdhci_bcm1-slot0: Present: 0x000f0000 | Host ctl: 0x00000001
sdhci_bcm1-slot0: Power: 0x0000000f | Blk gap: 0x00000000
sdhci_bcm1-slot0: Wake-up: 0x00000000 | Clock: 0x00003947
sdhci_bcm1-slot0: Timeout: 0x00000000 | Int stat: 0x00000000
sdhci_bcm1-slot0: Int enab: 0x01ff00bb | Sig enab: 0x01ff00bb
sdhci_bcm1-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000
sdhci_bcm1-slot0: Caps: 0x00000000 | Caps2: 0x00000000
sdhci_bcm1-slot0: Max curr: 0x00000001 | ADMA err: 0x00000000
sdhci_bcm1-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000
sdhci_bcm1-slot0: ===========================================
sdhci_bcm1-slot0: Got command interrupt 0x00030000, but there is no active command.
sdhci_bcm1-slot0: ============== REGISTER DUMP ==============
sdhci_bcm1-slot0: Sys addr: 0x00000000 | Version: 0x00009902
sdhci_bcm1-slot0: Blk size: 0x00000000 | Blk cnt: 0x00000000
sdhci_bcm1-slot0: Argument: 0x00000000 | Trn mode: 0x00000000
sdhci_bcm1-slot0: Present: 0x000f0000 | Host ctl: 0x00000001
sdhci_bcm1-slot0: Power: 0x0000000f | Blk gap: 0x00000000
sdhci_bcm1-slot0: Wake-up: 0x00000000 | Clock: 0x00003947
sdhci_bcm1-slot0: Timeout: 0x00000000 | Int stat: 0x00000000
sdhci_bcm1-slot0: Int enab: 0x01ff00bb | Sig enab: 0x01ff00bb
sdhci_bcm1-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000
sdhci_bcm1-slot0: Caps: 0x00000000 | Caps2: 0x00000000
sdhci_bcm1-slot0: Max curr: 0x00000001 | ADMA err: 0x00000000
sdhci_bcm1-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000
sdhci_bcm1-slot0: ===========================================
sdhci_bcm1-slot0: Got command interrupt 0x00030000, but there is no active command.
sdhci_bcm1-slot0: ============== REGISTER DUMP ==============
sdhci_bcm1-slot0: Sys addr: 0x00000000 | Version: 0x00009902
sdhci_bcm1-slot0: Blk size: 0x00000000 | Blk cnt: 0x00000000
sdhci_bcm1-slot0: Argument: 0x00000000 | Trn mode: 0x00000000
sdhci_bcm1-slot0: Present: 0x000f0000 | Host ctl: 0x00000001
sdhci_bcm1-slot0: Power: 0x0000000f | Blk gap: 0x00000000
sdhci_bcm1-slot0: Wake-up: 0x00000000 | Clock: 0x00003947
sdhci_bcm1-slot0: Timeout: 0x00000000 | Int stat: 0x00000000
sdhci_bcm1-slot0: Int enab: 0x01ff00bb | Sig enab: 0x01ff00bb
sdhci_bcm1-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000
sdhci_bcm1-slot0: Caps: 0x00000000 | Caps2: 0x00000000
sdhci_bcm1-slot0: Max curr: 0x00000001 | ADMA err: 0x00000000
sdhci_bcm1-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000
sdhci_bcm1-slot0: ===========================================
sdhci_bcm1-slot0: Got command interrupt 0x00030000, but there is no active command.
sdhci_bcm1-slot0: ============== REGISTER DUMP ==============
sdhci_bcm1-slot0: Sys addr: 0x00000000 | Version: 0x00009902
sdhci_bcm1-slot0: Blk size: 0x00000000 | Blk cnt: 0x00000000
sdhci_bcm1-slot0: Argument: 0x00000000 | Trn mode: 0x00000000
sdhci_bcm1-slot0: Present: 0x000f0000 | Host ctl: 0x00000001
sdhci_bcm1-slot0: Power: 0x0000000f | Blk gap: 0x00000000
sdhci_bcm1-slot0: Wake-up: 0x00000000 | Clock: 0x00003947
sdhci_bcm1-slot0: Timeout: 0x00000000 | Int stat: 0x00000000
sdhci_bcm1-slot0: Int enab: 0x01ff00bb | Sig enab: 0x01ff00bb
sdhci_bcm1-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000
sdhci_bcm1-slot0: Caps: 0x00000000 | Caps2: 0x00000000
sdhci_bcm1-slot0: Max curr: 0x00000001 | ADMA err: 0x00000000
sdhci_bcm1-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000
sdhci_bcm1-slot0: ===========================================
uhub0: 5 ports with 4 removable, self powered
sdhci_bcm1-slot0: Got command interrupt 0x00030000, but there is no active command.
sdhci_bcm1-slot0: ============== REGISTER DUMP ==============
sdhci_bcm1-slot0: Sys addr: 0x00000000 | Version: 0x00009902
sdhci_bcm1-slot0: Blk size: 0x00000000 | Blk cnt: 0x00000000
sdhci_bcm1-slot0: Argument: 0x00000000 | Trn mode: 0x00000000
sdhci_bcm1-slot0: Present: 0x000f0000 | Host ctl: 0x00000001
sdhci_bcm1-slot0: Power: 0x0000000f | Blk gap: 0x00000000
sdhci_bcm1-slot0: Wake-up: 0x00000000 | Clock: 0x00003947
sdhci_bcm1-slot0: Timeout: 0x00000000 | Int stat: 0x00000000
sdhci_bcm1-slot0: Int enab: 0x01ff00bb | Sig enab: 0x01ff00bb
sdhci_bcm1-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000
sdhci_bcm1-slot0: Caps: 0x00000000 | Caps2: 0x00000000
sdhci_bcm1-slot0: Max curr: 0x00000001 | ADMA err: 0x00000000
sdhci_bcm1-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000
sdhci_bcm1-slot0: ===========================================
mmc1: No compatible cards found on bus
Trying to mount root from ufs:/dev/ufs/rootfs [rw]...
Release APs...done
CPU 0: ARM Cortex-A72 r0p3 affinity: 0
Cache Type = <64 byte D-cacheline,64 byte I-cacheline,PIPT ICache,64 byte ERG,64 byte CWG>
Instruction Set Attributes 0 = <CRC32>
Instruction Set Attributes 1 = <>
Processor Features 0 = <AdvSIMD,FP,EL3 32,EL2 32,EL1 32,EL0 32>
Processor Features 1 = <>
Memory Model Features 0 = <TGran4,TGran64,SNSMem,BigEnd,16bit ASID,16TB PA>
Memory Model Features 1 = <8bit VMID>
Memory Model Features 2 = <32bit CCIDX,48bit VA>
Debug Features 0 = <2 CTX BKPTs,4 Watchpoints,6 Breakpoints,PMUv3,Debugv8>
Debug Features 1 = <>
Auxiliary Features 0 = <>
Auxiliary Features 1 = <>
CPU 1: ARM Cortex-A72 r0p3 affinity: 1
CPU 2: ARM Cortex-A72 r0p3 affinity: 2
CPU 3: ARM Cortex-A72 r0p3 affinity: 3
Warning: no time-of-day clock registered, system time will not be set accurately
Setting hostuuid: 30303031-3030-3030-6663-613230626663.
Setting hostid: 0x4ea5205f.
No suitable dump device was found.
Starting file system checks:
/dev/ufs/rootfs: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ufs/rootfs: clean, 8493993 free (19913 frags, 1059260 blocks, 0.1% fragmentation)
xhci0: Resetting controller
ugen0.2: <Unknown > at usbus0 (disconnected)
Mounting local filesystems:.
ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/local/lib /usr/local/lib/nss /usr/local/lib/perl5/5.30/mach/CORE /usr/local/lib/samba4 /usr/local/llvm80/lib
Setting hostname: generic.
Setting up harvesting: [UMA],[FS_ATIME],SWI,INTERRUPT,NET_NG,[NET_ETHER],NET_TUN,MOUSE,KEYBOARD,ATTACH,CACHED
Feeding entropy: .
ugen0.2: <Unknown > at usbus0 (disconnected)
lo0: link state changed to UP
uhub0: at usbus0, port 1, addr 1 (disconnected)
uhub0: detached
uhub0 on usbus0
uhub0: <0x1106 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
genet0: link state changed to DOWN
uhub0: 5 ports with 4 removable, self powered
ugen0.2: <vendor 0x2109 USB2.0 Hub> at usbus0
uhub1 on uhub0
uhub1: <vendor 0x2109 USB2.0 Hub, class 9/0, rev 2.10/4.21, addr 1> on usbus0
uhub1: 4 ports with 4 removable, self powered
Starting Network: lo0 genet0.
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
options=680003<RXCSUM,TXCSUM,LINKSTATE,RXCSUM_IPV6,TXCSUM_IPV6>
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x2
inet[_IP_XXXX] netmask 0xff000000
groups: lo
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
genet0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=68000b<RXCSUM,TXCSUM,VLAN_MTU,LINKSTATE,RXCSUM_IPV6,TXCSUM_IPV6>
ether [_MAC_XXXXXXXXXX]
media: Ethernet autoselect (none)
status: no carrier
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
Starting devd.
ugen0.3: <Mitsumi Electric Hub in Apple Extended USB Keyboard> at usbus0
uhub2 on uhub1
uhub2: <Mitsumi Electric Hub in Apple Extended USB Keyboard, class 9/0, rev 1.10/4.20, addr 2> on usbus0
uhub2: 3 ports with 2 removable, bus powered
genet0: link state changed to UP
ugen0.4: <SIGMACHIP Usb Mouse> at usbus0
ugen0.5: <Mitsumi Electric Apple Extended USB Keyboard> at usbus0
ukbd0 on uhub2
ukbd0: <Mitsumi Electric Apple Extended USB Keyboard, class 0/0, rev 1.10/4.20, addr 4> on usbus0
kbd1 at ukbd0
ugen0.6: <SanDisk Ultra USB 3.0> at usbus0
umass0 on uhub0
umass0: <SanDisk Ultra USB 3.0, class 0/0, rev 3.00/1.00, addr 5> on usbus0
ugen0.4: <SIGMACHIP Usb Mouse> at usbus0 (disconnected)
da0 at umass-sim0 bus 0 scbus0 target 0 lun 0
da0: <SanDisk Ultra USB 3.0 1.00> Removable Direct Access SPC-4 SCSI device
da0: [_SERIAL_NUMBER_XXXXXXXXXXXXXXXXX]
da0: 400.000MB/s transfers
da0: 29327MB (60062500 512 byte sectors)
da0: quirks=0x2<NO_6_BYTE>
GEOM: da0s2: invalid disklabel.
ugen0.4: <SIGMACHIP Usb Mouse> at usbus0
ugen0.4: <SIGMACHIP Usb Mouse> at usbus0 (disconnected)
Starting dhclient.
DHCPREQUEST on genet0 to[_IP_XXXXXXXXXX] port 67
DHCPACK from[_IP_XXXXXX]
bound to[_IP_XXXXXXXX] -- renewal in 43200 seconds.
Autoloading module: uhid.ko
Autoloading module: ums.ko
ugen0.4: <SIGMACHIP Usb Mouse> at usbus0
ums0 on uhub2
ums0: <SIGMACHIP Usb Mouse, class 0/0, rev 1.10/1.10, addr 3> on usbus0
ums0: 3 buttons and [XYZ] coordinates ID=0
uhid0 on uhub2
uhid0: <Mitsumi Electric Apple Extended USB Keyboard, class 0/0, rev 1.10/4.20, addr 4> on usbus0
Autoloading module: uhid.ko
Autoloading module: wmt.ko
Autoloading module: uhid.ko
Autoloading module: ums.ko
Starting ums0 moused.
add host[_IP_XXXX]: gateway lo0 fib 0: route already in table
add host ::1: gateway lo0 fib 0: route already in table
add net fe80::: gateway ::1
add net ff02::: gateway ::1
add net ::ffff:0.0.0.0: gateway ::1
add net ::0.0.0.0: gateway ::1
Creating and/or trimming log files.
Starting syslogd.
Clearing /tmp (X related).
Updating motd:.
Mounting late filesystems:.
Updating /var/run/os-release done.
Configuring vt: blanktime.
Performing sanity check on sshd configuration.
Starting sshd.
Starting cron.
Starting background file system checks in 60 seconds.
Sun Apr 26 16:12:56 UTC 2020
FreeBSD/arm64 (generic) (ttyu0)
login: root
Password:
Apr 26 16:13:06 generic login[1174]: ROOT LOGIN (root) ON ttyu0
Last login: Sun Apr 26 16:09:10 on ttyu0
FreeBSD 13.0-CURRENT (GENERIC-NODEBUG) #18 53d07242e9a-c268943(master): Sun Apr 26 14:14:27 UTC 2020
Welcome to FreeBSD!
Release Notes, Errata: https://www.FreeBSD.org/releases/
Security Advisories: https://www.FreeBSD.org/security/
FreeBSD Handbook: https://www.FreeBSD.org/handbook/
FreeBSD FAQ: https://www.FreeBSD.org/faq/
Questions List: https://lists.FreeBSD.org/mailman/listinfo/freebsd-questions/
FreeBSD Forums: https://forums.FreeBSD.org/
Documents installed with the system are in the /usr/local/share/doc/freebsd/
directory, or can be installed later with: pkg install en-freebsd-doc
For other languages, replace "en" with a language code like de or fr.
Show the version of FreeBSD installed: freebsd-version ; uname -a
Please include that output and any error messages when posting questions.
Introduction to manual pages: man man
FreeBSD directory layout: man hier
Edit /etc/motd.template to change this login announcement.
root@generic:~ # usbconfig
ugen0.1: <0x1106 XHCI root HUB> at usbus0, cfg=0 md=HOST spd=SUPER (5.0Gbps) pwr=SAVE (0mA)
ugen0.2: <vendor 0x2109 USB2.0 Hub> at usbus0, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAVE (100mA)
ugen0.3: <Mitsumi Electric Hub in Apple Extended USB Keyboard> at usbus0, cfg=0 md=HOST spd=FULL (12Mbps) pwr=SAVE (50mA)
ugen0.5: <Mitsumi Electric Apple Extended USB Keyboard> at usbus0, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON (50mA)
ugen0.6: <SanDisk Ultra USB 3.0> at usbus0, cfg=0 md=HOST spd=SUPER (5.0Gbps) pwr=ON (224mA)
ugen0.4: <SIGMACHIP Usb Mouse> at usbus0, cfg=0 md=HOST spd=LOW (1.5Mbps) pwr=ON (100mA)
root@generic:~ # mount_msdosfs /dev/da0s1 /mnt
root@generic:~ # df -h
Filesystem Size Used Avail Capacity Mounted on
/dev/ufs/rootfs 58G 25G 28G 47% /
devfs 1.0K 1.0K 0B 100% /dev
/dev/msdosfs/MSDOSBOOT 50M 29M 21M 57% /boot/msdos
/dev/da0s1 50M 26M 23M 53% /mnt