Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2020-06-23 01:16:53
From: yamori813
Description: Buffalo_WZR-HP-G300NH
Starting kernel ...
CPU platform: Atheros AR9132 rev 2
CPU Frequency=400 MHz
CPU DDR Frequency=400 MHz
CPU AHB Frequency=200 MHz
platform frequency: 400 MHz
CPU reference clock: 5 MHz
CPU MDIO clock: 5 MHz
arguments:
a0 = 00000007
a1 = a3f57fb0
a2 = a3f58480
a3 = 00000020
Cmd line:argv is invalid
Environment:
envp is invalid
Cache info:
picache_stride = 4096
picache_loopcount = 16
pdcache_stride = 4096
pdcache_loopcount = 8
max line size = 32
Physical memory chunk(s):
0x547000 - 0x3ffffff, 61575168 bytes (15033 pages)
Maxmem is 0x4000000
---<<BOOT>>---
KDB: debugger backends: ddb
KDB: current backend: ddb
Copyright (c) 1992-2020 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 13.0-CURRENT #0 r362508: Tue Jun 23 09:42:56 JST 2020
hiroki@ryzen:/usr/home/hiroki/z/obj/usr/home/hiroki/z/ZRouter/tmp/usr/home/hiroki/z/src/mips.mips/sys/Buffalo_WZR-HP-G300NH mips
FreeBSD clang version 10.0.1 ([_EMAIL_XXXXX]:llvm/llvm-project.git llvmorg-10.0.0-97-g6f71678ecd2)
Preloaded elf kernel "kernel" at 0x80540a10.
CPU: MIPS Technologies (Atheros AR9132 rev 2) processor v116.147
MMU: Standard TLB, 16 entries (4K 16K 64K 256K 1M 16M 64M 256M pg sizes)
L1 i-cache: 4 ways of 512 sets, 32 bytes per line
L1 d-cache: 4 ways of 256 sets, 32 bytes per line
L2 cache: disabled
Config1=0x9ee3519e<PerfCount,WatchRegs,MIPS16,EJTAG>
Config2=0x80000000
Config3=0x20
Config7=0x0
real memory = 67108864 (65536K bytes)
Physical memory chunk(s):
0x005d3000 - 0x03efcfff, 59940864 bytes (14634 pages)
avail memory = 59084800 (56MB)
random: no preloaded entropy cache
arc4random: WARNING: initial seeding bypassed the cryptographic random device because it was not yet seeded and the knob 'bypass_before_seeding' was enabled.
hostuuid: using 00000000-0000-0000-0000-000000000000
random: entropy device external interface
wlan: <802.11 Link Layer>
null: <full device, null device, zero device>
[ath_hal] loaded
mem: <memory>
nexus0: <MIPS32 root nexus>
clock0: <Generic MIPS32 ticker> on nexus0
Timecounter "MIPS32" frequency 200000000 Hz quality 800
Event timer "MIPS32" frequency 200000000 Hz quality 800
apb0 at irq 4 on nexus0
uart0: <16550 or compatible> at mem 0x18020003-0x1802001a irq 3 on apb0
uart0: console (115200,n,8,1)
uart0: fast interrupt
uart0: PPS capture mode: DCD
gpio0: <Atheros AR71XX GPIO driver> at mem 0x18040000-0x18040fff irq 2 on apb0
gpio0: [GIANT-LOCKED]
gpio0: function_set: 0x2000
gpio0: function_clear: 0x0
gpio0: gpio pinmask=0x1e5a40
gpiobus0: <GPIO bus> on gpio0
gpioiic0: <GPIO I2C> at pins 19-20 on gpiobus0
gpioiic0: SCL pin: gpiobus0:20, SDA pin: gpiobus0:19
iicbb0: <I2C bit-banging driver> on gpioiic0
iicbus0: <Philips I2C bus> on iicbb0 master-only
rtl8366rb0: <RTL8366RB Ethernet Switch Controller> at addr 0xa8 on iicbus0
rtl8366rb0: rev. 3
miibus0: <MII bus> on rtl8366rb0
ukphy0: <Generic IEEE 802.3u media interface> PHY 0 on miibus0
ukphy0: OUI 0x00e04c, model 0x0016, rev. 1
ukphy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto
miibus1: <MII bus> on rtl8366rb0
ukphy1: <Generic IEEE 802.3u media interface> PHY 1 on miibus1
ukphy1: OUI 0x00e04c, model 0x0016, rev. 1
ukphy1: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto
miibus2: <MII bus> on rtl8366rb0
ukphy2: <Generic IEEE 802.3u media interface> PHY 2 on miibus2
ukphy2: OUI 0x00e04c, model 0x0016, rev. 1
ukphy2: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto
miibus3: <MII bus> on rtl8366rb0
ukphy3: <Generic IEEE 802.3u media interface> PHY 3 on miibus3
ukphy3: OUI 0x00e04c, model 0x0016, rev. 1
ukphy3: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto
mdio0: <MDIO> on rtl8366rb0
mdioproxy0: <MII/MDIO proxy, MDIO side> on mdio0
etherswitch0: <Switch controller> on rtl8366rb0
iic0: <I2C generic I/O> on iicbus0
gpiobus0: <unknown device> at pins 9,11-12,14
gpioled0: <GPIO led> at pin 6 on gpiobus0
gpioled1: <GPIO led> at pin 17 on gpiobus0
gpioled2: <GPIO led> at pin 18 on gpiobus0
gpioc0: <GPIO controller> on gpio0
arge0: <Atheros AR71xx built-in ethernet interface> at mem 0x19000000-0x19000fff irq 2 on nexus0
arge0: Overriding MAC from EEPROM
arge0: arge_fetch_pll_config: pll_1000 = 0x1e000100
arge0: arge_attach: overriding MII mode to 'RGMII'
mii_attach_proxy: not attaching, no mdio device hint for arge0
arge0: finishing attachment, phymask 0000, proxy null
arge0: bpf attached
arge0: Ethernet address: [_MAC_XXXXXXXXXX]
arge1: <Atheros AR71xx built-in ethernet interface> at mem 0x1a000000-0x1a000fff irq 3 on nexus0
arge1: arge_fetch_pll_config: pll_1000 = 0x1e000100
arge1: arge_attach: overriding MII mode to 'RGMII'
arge1: Generating random ethernet address.
miiproxy0: <MII/MDIO proxy, MII side> on arge1
miiproxy0: attached to target mdio0
arge1: finishing attachment, phymask 0010, proxy set
miibus4: <MII bus> on miiproxy0
ukphy4: <Generic IEEE 802.3u media interface> PHY 4 on miibus4
ukphy4: OUI 0x00e04c, model 0x0016, rev. 1
ukphy4: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto
arge1: bpf attached
arge1: Ethernet address: [_MAC_XXXXXXXXXX]
spi0: <AR71XX SPI> at mem 0x1f000000-0x1f00000f on nexus0
spibus0: <SPI bus> on spi0
ehci0: <AR71XX Integrated USB 2.0 controller> at mem 0x1b000100-0x1bffffff irq 1 on nexus0
usbus0: EHCI version 1.0
usbus0 on ehci0
ehci0: usbpf: Attached
cfi0 at mem 0xbe000000-0xbfffffff on nexus0
cfi0: [256x128KB]
cfi0: Manufacturer ID:c2 Device ID:227e
cfid0 on cfi0
ath0: Vendor=0x168c, Device=0x000b
ath0: Vendor=0x168c, Device=0x000b
ath0: <Atheros 9130> at mem 0x180c0000-0x180effff irq 0 on nexus0
ath0: unable to attach hardware; HAL status 8
Unimplemented nexus_teardown_intr at /usr/home/hiroki/z/src/sys/mips/mips/nexus.c:511
device_attach: ath0 attach returned 6
ar71xx_wdog0: <Atheros AR71XX watchdog timer> on nexus0
ar71xx_wdog0: Previous reset was due to watchdog timeout
Device configuration finished.
Timecounters tick every 1.000 msec
lo0: bpf attached
vlan: initialized, using hash tables with chaining
tcp_init: net.inet.tcp.tcbhashsize auto tuned to 1024
Obsolete code will be removed soon: random(9) is the obsolete Park-Miller LCG from 1988
rtl8366rb0port0: link state changed to DOWN
rtl8366rb0port1: link state changed to DOWN
rtl8366rb0port2: link state changed to DOWN
rtl8366rb0port3: link state changed to DOWN
GEOM: new disk cfid0
MAP: cfid0: 0x40000, data=0x40000 "/dev/map/u-boot"
MAP: cfid0: 40000x20000, data=0x20000 "/dev/map/u-boot-env"
MAP: search cfid0 for key ".!/bin/sh" from 0x100000, step 0x10000
usbus0: 480Mbps High Speed USB v2.0
Trying to mount root from cd9660:/dev/map/rootfs.uzip []...
ugen0.1: <Atheros EHCI root HUB> at usbus0
uhub0 on usbus0
uhub0: <Atheros EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
MAP: cfid0: 60000x160000, data=0x160000 "/dev/map/kernel"
MAP: search cfid0 for key ".!/bin/sh" from 0x100000, step 0x10000
MAP: cfid0: 1c0000x1e00000, data=0x1e00000 "/dev/map/rootfs"
MAP: cfid0: 1fc0000x20000, data=0x20000 "/dev/map/ART"
MAP: cfid0: 1fe0000x20000, data=0x20000 "/dev/map/properties"
MAP: cfid0: 60000x1f60000, data=0x1f60000 "/dev/map/upgrade"
MAP: No valid partition found at map/rootfs.uzip
cd9660: RockRidge Extension
Warning: no time-of-day clock registered, system time will not be set accurately
start_init: trying /sbin/init
uhub0: 1 port with 1 removable, self powered
rtl8366rb0port1: link state changed to UP
port0:
pvid: 1
flags=0<>
media: Ethernet autoselect (none)
status: no carrier
port1:
pvid: 1
flags=0<>
media: Ethernet autoselect (1000baseT <full-duplex>)
status: active
port2:
pvid: 1
flags=0<>
media: Ethernet autoselect (none)
status: no carrier
port3:
pvid: 1
flags=0<>
media: Ethernet autoselect (none)
status: no carrier
port4:
pvid: 1
flags=1<CPUPORT>
media: Ethernet 1000baseT <full-duplex,rxpause,txpause>
status: active
vlangroup1:
vlan: 2
members none
vlangroup0:
vlan: 1
members 0,1,2,3,4
kern.coredump: 1 -> 0
net.inet.ip.forwarding: 0 -> 1
memory disk size = 10m
MAP: No valid partition found at md0
random: unblocking device.
MAP: No valid partition found at md0