Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2020-06-28 03:34:30
From: al3c77
Description: FreeBSD/amd64 on Dell Inc. Inspiron 5437
---<<BOOT>>--- Copyright (c) 1992-2020 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 12.1-STABLE GENERIC amd64 FreeBSD clang version 9.0.1 ([_EMAIL_XXXXX]:llvm/llvm-project.git c1a0a213378a458fbea1a5c77b315c7dce08fd05) (based on LLVM 9.0.1) VT(vga): resolution 640x480 CPU: Intel(R) Core(TM) i7-4500U CPU @ 1.80GHz (1795.88-MHz K8-class CPU) Origin="GenuineIntel" Id=0x40651 Family=0x6 Model=0x45 Stepping=1 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x7fdafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> AMD Features2=0x21<LAHF,ABM> Structured Extended Features=0x27ab<FSGSBASE,TSCADJ,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG> Structured Extended Features3=0x9c000000<IBPB,STIBP,L1DFL,SSBD> XSAVE Features=0x1<XSAVEOPT> VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID TSC: P-state invariant, performance statistics real memory = 8589934592 (8192 MB) avail memory = 8168345600 (7789 MB) ACPI APIC Table: <DELL WN09> FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 hardware threads arc4random: no preloaded entropy cache ioapic0 <Version 2.0> irqs 0-39 on motherboard Launching APs: 1 2 3 Timecounter "TSC" frequency 1795881832 Hz quality 1000 Cuse v0.1.36 @ /dev/cuse random: entropy device external interface 000.000020 [4336] netmap_init netmap: loaded module [ath_hal] loaded module_register_init: MOD_LOAD (vesa, 0xffffffff81183130, 0) error 19 random: registering fast source Intel Secure Key RNG random: fast provider: "Intel Secure Key RNG" kbd1 at kbdmux0 nexus0 vtvga0: <VT VGA driver> on motherboard cryptosoft0: <software crypto> on motherboard aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> on motherboard acpi0: <DELL WN09 > on motherboard acpi0: Power Button (fixed) cpu0: <ACPI CPU> on acpi0 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 Event timer "HPET" frequency 14318180 Hz quality 550 Event timer "HPET1" frequency 14318180 Hz quality 440 Event timer "HPET2" frequency 14318180 Hz quality 440 Event timer "HPET3" frequency 14318180 Hz quality 440 Event timer "HPET4" frequency 14318180 Hz quality 440 atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 atrtc0: Warning: Couldn't map I/O. atrtc0: registered as a time-of-day clock, resolution 1.000000s Event timer "RTC" frequency 32768 Hz quality 0 attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xf7400000-0xf77fffff,0xd0000000-0xdfffffff irq 16 at device 2.0 on pci0 vgapci0: Boot video device hdac0: <Intel Haswell HDA Controller> mem 0xf7a14000-0xf7a17fff irq 16 at device 3.0 on pci0 xhci0: <Intel Panther Point USB 3.0 controller> mem 0xf7a00000-0xf7a0ffff irq 16 at device 20.0 on pci0 xhci0: 32 bytes context size, 64-bit DMA xhci0: Port routing mask set to 0xffffffff usbus0 on xhci0 usbus0: 5.0Gbps Super Speed USB v3.0 pci0: <simple comms> at device 22.0 (no driver attached) hdac1: <Intel Lynx Point-LP HDA Controller> mem 0xf7a10000-0xf7a13fff irq 22 at device 27.0 on pci0 pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 pci1: <ACPI PCI bus> on pcib1 pcib2: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 pci2: <ACPI PCI bus> on pcib2 ath0: <Qualcomm Atheros AR9565> mem 0xf7900000-0xf797ffff irq 18 at device 0.0 on pci2 ath0: WB335 1-ANT card detected ath0: Bluetooth Antenna Diversity card detected ar9300_flash_map: unimplemented for now Restoring Cal data from DRAM Restoring Cal data from EEPROM Restoring Cal data from Flash Restoring Cal data from Flash Restoring Cal data from OTP ar9300_hw_attach: ar9300_eeprom_attach returned 0 ath0: [HT] enabling HT modes ath0: [HT] enabling short-GI in 20MHz mode ath0: [HT] 1 stream STBC receive enabled ath0: [HT] 1 RX streams; 1 TX streams arc4random: no preloaded entropy cache ath0: QCA9565 mac 704.1 RF5110 phy 3093.0 ath0: 2GHz radio: 0x0000; 5GHz radio: 0x0000 pcib3: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 pci3: <ACPI PCI bus> on pcib3 re0: <RealTek 810xE PCIe 10/100baseTX> port 0xe000-0xe0ff mem 0xf7804000-0xf7804fff,0xf7800000-0xf7803fff irq 19 at device 0.0 on pci3 re0: Using 1 MSI-X message re0: ASPM disabled re0: Chip rev. 0x50800000 re0: MAC rev. 0x00100000 miibus0: <MII bus> on re0 rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0 rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, auto, auto-flow re0: Using defaults for TSO: 65518/35/2048 re0: Ethernet address: [_MAC_XXXXXXXXXX] re0: netmap queues/slots: TX 1/256, RX 1/256 pcib4: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0 pci4: <ACPI PCI bus> on pcib4 vgapci1: <VGA-compatible display> port 0xd000-0xd07f mem 0xf6000000-0xf6ffffff,0xe0000000-0xefffffff,0xf0000000-0xf1ffffff irq 16 at device 0.0 on pci4 ehci0: <Intel Lynx Point-LP USB 2.0 controller> mem 0xf7a1b000-0xf7a1b3ff irq 23 at device 29.0 on pci0 usbus1: EHCI version 1.0 usbus1 on ehci0 usbus1: 480Mbps High Speed USB v2.0 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 ahci0: <Intel Lynx Point-LP AHCI SATA controller> port 0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0xf7a1a000-0xf7a1a7ff irq 19 at device 31.2 on pci0 ahci0: AHCI v1.30 with 4 6Gbps ports, Port Multiplier not supported ahcich0: <AHCI channel> at channel 0 on ahci0 ahcich1: <AHCI channel> at channel 1 on ahci0 battery0: <ACPI Control Method Battery> on acpi0 acpi_acad0: <AC Adapter> on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_button0: <Power Button> on acpi0 acpi_button1: <Sleep Button> on acpi0 acpi_tz0: <Thermal Zone> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] orm0: <ISA Option ROM> at iomem 0xcf000-0xcffff pnpid ORM0000 on isa0 est0: <Enhanced SpeedStep Frequency Control> on cpu0 ZFS filesystem version: 5 ZFS storage pool version: features support (5000) Timecounters tick every 10.000 msec arc4random: no preloaded entropy cache ugen1.1: <Intel EHCI root HUB> at usbus1 ugen0.1: <0x8086 XHCI root HUB> at usbus0 battery0: hdacc0: <Intel Haswell HDA CODEC> at cad 0 on hdac0 hdaa0: critically low charge! <Intel Haswell Audio Function Group> at nid 1 on hdacc0 pcm0: <Intel Haswell (HDMI/DP 8ch)> at nid 3 on hdaa0 hdacc1: <Realtek ALC283 HDA CODEC> at cad 0 on hdac1 hdaa1: <Realtek ALC283 Audio Function Group> at nid 1 on hdacc1 pcm1: <Realtek ALC283 (Analog 2.0+HP/2.0)> at nid 20,33 and 18 on hdaa1 uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 Trying to mount root from zfs:zBSD/ROOT/initial []... Root mount waiting for: CAM uhub1: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 ada0: <WDC WDS120G2G0A-00JH30 UE300000> ACS-2 ATA SATA 3.x device ada0: [_SERIAL_NUMBER_XXXXXXXXX] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) ada0: Command Queueing enabled ada0: 114480MB (234455040 512 byte sectors) ada0: quirks=0x3<4K,NCQ_TRIM_BROKEN> ada1 at ahcich1 bus 0 scbus1 target 0 lun 0 ada1: <ST1000LM024 HN-M101MBB 2BA30001> ATA8-ACS SATA 3.x device ada1: [_SERIAL_NUMBER_XXXXXXXXXXX] ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) ada1: Command Queueing enabled ada1: 953869MB (1953525168 512 byte sectors) random: unblocking device. arc4random: no preloaded entropy cache uhub1: 13 ports with 13 removable, self powered uhub0: 2 ports with 2 removable, self powered interface fusefs.1 already present in the KLD 'fusefs.ko'! linker_load_file: /boot/kernel/fuse.ko - unsupported file type ugen1.2: <vendor 0x8087 product 0x8000> at usbus1 uhub2 on uhub0 uhub2: <vendor 0x8087 product 0x8000, class 9/0, rev 2.00/0.04, addr 2> on usbus1 [drm] amdgpu kernel modesetting enabled. uhub2: 8 ports with 8 removable, self powered [drm] radeon kernel modesetting enabled. drmn0: <drmn> on vgapci0 vgapci0: child drmn0 requested pci_enable_io vgapci0: child drmn0 requested pci_enable_io [drm] Unable to create a private tmpfs mount, hugepage support will be disabled(-19). Failed to add WC MTRR for [0xd0000000-0xdfffffff]: -22; performance may suffer [drm] Got stolen memory base 0xcd200000, size 0x2000000 [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [drm] Driver supports precise vblank timestamp query. [drm] Connector eDP-1: get mode from tunables: [drm] - kern.vt.fb.modes.eDP-1 [drm] - kern.vt.fb.default_mode ugen1.3: <Microsoft Microsoft 2.4GHz Transceiver v8.0> at usbus1 ukbd0 on uhub2 ukbd0: <Microsoft Microsoft 2.4GHz Transceiver v8.0, class 0/0, rev 2.00/6.56, addr 3> on usbus1 kbd2 at ukbd0 ums0 on uhub2 ums0: <Microsoft Microsoft 2.4GHz Transceiver v8.0, class 0/0, rev 2.00/6.56, addr 3> on usbus1 ums0: 5 buttons and [XYZT] coordinates ID=26 ums0: 0 buttons and [T] coordinates ID=0 [drm] Connector HDMI-A-1: get mode from tunables: [drm] - kern.vt.fb.modes.HDMI-A-1 [drm] - kern.vt.fb.default_mode [drm] Initialized i915 1.6.0 20171222 for drmn0 on minor 0 VT: Replacing driver "vga" with new "fb". start FB_INFO: type=11 height=768 width=1360 depth=32 cmsize=16 size=4227072 pbase=0xd0081000 vbase=0xfffff800d0081000 name=drmn0 flags=0x0 stride=5504 bpp=32 cmap[0]=0 cmap[1]=7f0000 cmap[2]=7f00 cmap[3]=c4a000 end FB_INFO drmn0: fb0: inteldrmfb frame buffer device ugen1.4: <CN0Y3PX87248743LB1R9A02 IntegratedWebcamHD> at usbus1 wlan0: Ethernet address: [_MAC_XXXXXXXXXX] bridge0: Ethernet address: [_MAC_XXXXXXXXXX] tap0: Ethernet address: [_MAC_XXXXXXXXXX] lo0: link state changed to UP re0: link state changed to DOWN ugen1.5: <vendor 0x0cf3 product 0x0036> at usbus1 re0: promiscuous mode enabled bridge0: link state changed to DOWN tap0: promiscuous mode enabled ugen1.6: <ELAN Touchscreen> at usbus1 re0: link state changed to UP bridge0: link state changed to UP