Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2020-06-28 11:06:02
From: _nrgmilk
Description: Raspberry Pi 3 Model B, UEFI boot, FreeBSD 12.1-STABLE r362642 GENERIC arm64
Raspberry Pi Bootcode
Read File: config.txt, 169
Read File: start.elf, 2998432 (bytes)
Read File: fixup.dat, 7270 (bytes)
NOTICE: Booting Trusted Firmware
NOTICE: BL1: v2.3():v2.3
NOTICE: BL1: Built : 10:40:46, Apr 21 2020
NOTICE: rpi3: Detected: Raspberry Pi 3 Model B (1GB, Sony, UK) [0x00a02082]
NOTICE: BL1: Booting BL2
NOTICE: BL2: v2.3():v2.3
NOTICE: BL2: Built : 10:40:42, Apr 21 2020
NOTICE: BL1: Booting BL31
NOTICE: BL31: v2.3():v2.3
NOTICE: BL31: Built : 10:40:44, Apr 21 2020
UEFI firmware (version UEFI Firmware v1.27 built at 16:16:56 on Jun 12 2020)
ESC (setup), F1 (shell), ENTER (boot).
Raspberry Pi 3 Model B
BCM2837 (ARM Cortex-A53) 1.20 GHz
UEFI Firmware v1.27 1024 MB RAM
Select Language <Standard English> Continue
> Device Manager
> Boot Manager
> Boot Maintenance Manager
Continue
Reset
^v=Move Highlight <Enter>=Select Entry
>> FreeBSD EFI boot block
Loader path: /boot/loader.efi
Initializing modules: ZFS UFS
Load Path: \EFI\BOOT\BOOTAA64.EFI
Load Device: VenHw(58ABD787-F64D-4CA2-A034-B9AC2D5AD0CF)/HD(1,MBR,0x00000000,
0x3F,0x3AA5FC1)
BootCurrent: 0002
BootOrder: 0000 0001 0002[*] 0003
Probing 5 block devices...not supported
not supported
not supported
not supported
good
done
ZFS found no pools
UFS found 1 partition
Consoles: EFI console
Reading loader env vars from /efi/freebsd/loader.env
Setting currdev to disk1p2:
FreeBSD/arm64 EFI loader, Revision 1.1
Command line arguments: loader.efi
EFI version: 2.70
EFI Firmware: https://github.com/pftf/RPi3 (rev 1.00)
Console: efi (0)
Load Path: HD(2,MBR,0x00000000,0x197C7,0x3AFC839)
Load Device: VenHw(4BF1704C-03F4-46D5-BCA6-82FA580BADFD)/USB(0x0,0x0)/USB(0x2
,0x0)/HD(2,MBR,0x00000000,0x197C7,0x3AFC839)
BootCurrent: 0002
BootOrder: 0000 0001 0002[*] 0003
BootInfo Path: VenHw(58ABD787-F64D-4CA2-A034-B9AC2D5AD0CF)
Ignoring Boot0002: Only one DP found
Trying ESP: VenHw(4BF1704C-03F4-46D5-BCA6-82FA580BADFD)/USB(0x0,0x0)/USB(0x2,0x0
)/HD(2,MBR,0x00000000,0x197C7,0x3AFC839)
Setting currdev to disk1p2:
Loading /boot/defaults/loader.conf
Loading /boot/defaults/loader.conf
Loading /boot/device.hints
Loading /boot/loader.conf
Loading /boot/loader.conf.local
Loading kernel...
/boot/kernel/kernel text=0x8fe6f4 data=0x1848c0 data=0x0+0x2cebfe syms=[0x8+0x13
2e88+0x8+0x11fd91]
Loading configured modules...
/etc/hostid size=0x25
/boot/kernel/umodem.ko text=0x1ba0 text=0xf60 data=0x610+0x8 syms=[0x8+0xe28+0x8
+0xa7e]
/boot/kernel/pf.ko text=0x5d61 text=0x2be8c data=0x4428+0x1c8 syms=[0x8+0x4128+0
x8+0x2ff5]
/boot/entropy size=0x1000
Hit [Enter] to boot immediately, or any other key for command prompt.
Booting [/boot/kernel/kernel]...
Using DTB provided by EFI at 0x35bf7000.
EFI framebuffer information:
addr, size 0x3eaa9000, 0x151800
dimensions 720 x 480
stride 720
masks 0x00ff0000, 0x0000ff00, 0x000000ff, 0xff000000
---<<BOOT>>---
Copyright (c) 1992-2020 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 12.1-STABLE r362642 GENERIC arm64
FreeBSD clang version 10.0.0 ([_EMAIL_XXXXX]:llvm/llvm-project.git llvmorg-10.0.0-0-gd32170dbd5b)
VT(efifb): resolution 720x480
KLD file umodem.ko is missing dependencies
Starting CPU 1 (1)
Starting CPU 2 (2)
Starting CPU 3 (3)
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
random: unblocking device.
random: entropy device external interface
MAP 1d0000 mode 2 pages 32
MAP 33890000 mode 2 pages 80
MAP 338f0000 mode 2 pages 80
MAP 33940000 mode 2 pages 80
MAP 33a10000 mode 2 pages 128
MAP 33ab0000 mode 2 pages 128
MAP 37000000 mode 2 pages 400
MAP 37190000 mode 2 pages 592
kbd0 at kbdmux0
ofwbus0: <Open Firmware Device Tree>
simplebus0: <Flattened device tree simple bus> on ofwbus0
ofw_clkbus0: <OFW clocks bus> on ofwbus0
clk_fixed0: <Fixed clock> on ofw_clkbus0
clk_fixed1: <Fixed clock> on ofw_clkbus0
regfix0: <Fixed Regulator> on ofwbus0
regfix1: <Fixed Regulator> on ofwbus0
psci0: <ARM Power State Co-ordination Interface Driver> on ofwbus0
lintc0: <BCM2836 Interrupt Controller> mem 0x40000000-0x400000ff on simplebus0
intc0: <BCM2835 Interrupt Controller> mem 0x7e00b200-0x7e00b3ff irq 40 on simplebus0
gpio0: <BCM2708/2835 GPIO controller> mem 0x7e200000-0x7e2000b3 irq 8,9 on simplebus0
gpiobus0: <OFW GPIO bus> on gpio0
generic_timer0: <ARMv7 Generic Timer> irq 1,2,3,4 on ofwbus0
Timecounter "ARM MPCore Timecounter" frequency 19200000 Hz quality 1000
Event timer "ARM MPCore Eventtimer" frequency 19200000 Hz quality 1000
usb_nop_xceiv0: <USB NOP PHY> on ofwbus0
efirtc0: <EFI Realtime Clock>
efirtc0: registered as a time-of-day clock, resolution 0.000001s
bcm2835_clkman0: <BCM283x Clock Manager> mem 0x7e101000-0x7e102fff on simplebus0
bcmrng0: <Broadcom BCM2835 RNG> mem 0x7e104000-0x7e10400f irq 6 on simplebus0
mbox0: <BCM2835 VideoCore Mailbox> mem 0x7e00b880-0x7e00b8bf irq 7 on simplebus0
gpioc0: <GPIO controller> on gpio0
uart2: <PrimeCell UART (PL011)> mem 0x7e201000-0x7e2011ff irq 10 on simplebus0
sdhost_bcm0: <Broadcom 2708 SDHOST controller> mem 0x7e202000-0x7e2020ff irq 11 on simplebus0
sdhost_bcm0-slot0: Hardware doesn't specify timeout clock frequency, setting BROKEN_TIMEOUT quirk.
mmc0: <MMC/SD bus> on sdhost_bcm0
uart3: <BCM2835 Mini-UART> mem 0x7e215040-0x7e21507f irq 15 on simplebus0
uart3: console (115200,n,8,1)
bcm283x_dwcotg0: <DWC OTG 2.0 integrated USB controller (bcm283x)> mem 0x7e980000-0x7e98ffff,0x7e006000-0x7e006fff irq 22,23 on simplebus0
usbus0 on bcm283x_dwcotg0
bcm_dma0: <BCM2835 DMA Controller> mem 0x7e007000-0x7e007eff irq 24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39 on simplebus0
bcmwd0: <BCM2708/2835 Watchdog> mem 0x7e100000-0x7e100113,0x7e00a000-0x7e00a023 on simplebus0
sdhci_bcm0: <Broadcom 2708 SDHCI controller> mem 0x7e300000-0x7e3000ff irq 49 on simplebus0
mmc1: <MMC/SD bus> on sdhci_bcm0
fb0: <BCM2835 VT framebuffer driver> on simplebus0
fb0: keeping existing fb bpp of 32
fbd0 on fb0
VT: Replacing driver "efifb" with new "fb".
fb0: 720x480(720x480@0,0) 32bpp
fb0: fbswap: 1, pitch 2880, base 0x3eaa9000, screen_size 1382400
pmu0: <Performance Monitoring Unit> irq 0 on ofwbus0
cpulist0: <Open Firmware CPU Group> on ofwbus0
cpu0: <Open Firmware CPU> on cpulist0
bcm2835_cpufreq0: <CPU Frequency Control> on cpu0
cpu1: <Open Firmware CPU> on cpulist0
cpu2: <Open Firmware CPU> on cpulist0
cpu3: <Open Firmware CPU> on cpulist0
gpioled0: <GPIO LEDs> on ofwbus0
gpioled0: <led0> failed to map pin
gpioled0: <led1> failed to map pin
cryptosoft0: <software crypto>
Timecounters tick every 1.000 msec
usbus0: 480Mbps High Speed USB v2.0
ugen0.1: <DWCOTG OTG Root HUB> at usbus0
uhub0: <DWCOTG OTG Root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
mmcsd0: 31GB <SDHC SA32G 1.2 SN 23271D3D MFG 04/2014 by 2 TM> at mmc0 50.0MHz/4bit/65535-block
mmc1: No compatible cards found on bus
bcm2835_cpufreq0: ARM 1200MHz, Core 400MHz, SDRAM 400MHz, Turbo ON
Release APs...done
Trying to mount root from ufs:/dev/ufs/rootfs [rw]...
CPU 0: ARM Cortex-A53 r0p4 affinity: 0
Instruction Set Attributes 0 = <CRC32>
Instruction Set Attributes 1 = <>
Processor Features 0 = <AdvSIMD,Float,EL3 32,EL2 32,EL1 32,EL0 32>
Processor Features 1 = <0>
Memory Model Features 0 = <4k Granule,64k Granule,S/NS Mem,MixedEndian,16bit ASID,1TB PA>
Memory Model Features 1 = <>
Memory Model Features 2 = <32b CCIDX,48b VA>
Debug Features 0 = <2 CTX Breakpoints,4 Watchpoints,6 Breakpoints,PMUv3,Debug v8>
Debug Features 1 = <0>
Auxiliary Features 0 = <0>
Auxiliary Features 1 = <0>
CPU 1: ARM Cortex-A53 r0p4 affinity: 1
CPU 2: ARM Cortex-A53 r0p4 affinity: 2
CPU 3: ARM Cortex-A53 r0p4 affinity: 3
Root mount waiting for: usbus0
uhub0: 1 port with 1 removable, self powered
ugen0.2: <vendor 0x0424 product 0x9514> at usbus0
uhub1 on uhub0
uhub1: <vendor 0x0424 product 0x9514, class 9/0, rev 2.00/2.00, addr 2> on usbus0
uhub1: MTT enabled
Root mount waiting for: usbus0
uhub1: 5 ports with 4 removable, self powered
Root mount waiting for: usbus0
ugen0.3: <vendor 0x0424 product 0xec00> at usbus0
smsc0 on uhub1
smsc0: <vendor 0x0424 product 0xec00, rev 2.00/2.00, addr 3> on usbus0
smsc0: chip 0xec00, rev. 0002
miibus0: <MII bus> on smsc0
smscphy0: <SMC LAN8700 10/100 interface> PHY 1 on miibus0
smscphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ue0: <USB Ethernet> on smsc0
ue0: Ethernet address: [_MAC_XXXXXXXXXX]
Root mount waiting for: usbus0
Root mount waiting for: usbus0
ugen0.4: <Generic USB Storage> at usbus0
umass0 on uhub1
umass0 on uhub1
umass0: <Generic USB Storage, class 0/0, rev 2.10/8.19, addr 4> on usbus0
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
(probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00
(probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error
(probe0:umass-sim0:0:0:0): Retrying command, 3 more tries remain
(probe0:umass-sim0:0:0:0): REPORT LUNS. CDB: a0 00 00 00 00 00 00 00 00 10 00 00
(probe0:umass-sim0:0:0:0): CAM status: SCSI Status Error
(probe0:umass-sim0:0:0:0): SCSI status: Check Condition
(probe0:umass-sim0:0:0:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code)
Root mount waiting for:(probe0:umass-sim0:0:0:0): Error 22, Unretryable error CAM
da0 at umass-sim0 bus 0 scbus0 target 0 lun 0
da0: <Generic STORAGE DEVICE 0819> Removable Direct Access SPC-4 SCSI device
da0: [_SERIAL_NUMBER_XXXXXXXXX]
da0: 40.000MB/s transfers
da0: 30255MB (61962240 512 byte sectors)
da0: quirks=0x3<NO_SYNC_CACHE,NO_6_BYTE>
mountroot: waiting for device /dev/ufs/rootfs...
ue0: link state changed to DOWN
ue0: link state changed to UP