Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].


Date: 2020-06-28 21:19:18
From: thorpej
Description: Firefly / Libre Computer ROC-RK3328-CC - NetBSD 9.99.68
[   1.0000000] NetBSD/evbarm (fdt) booting ...
[   1.0000000] pool redzone disabled for 'kmem-04096'
[   1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
[   1.0000000]     2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
[   1.0000000]     2018, 2019, 2020 The NetBSD Foundation, Inc.  All rights reserved.
[   1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
[   1.0000000]     The Regents of the University of California.  All rights reserved.

[   1.0000000] NetBSD 9.99.68 (GENERIC64) #0: Sat Jun 20 15:48:19 UTC 2020
[   1.0000000]  [_EMAIL_XXXXXXXXXXXXXXXXX]:/usr/src/sys/arch/evbarm/compile/GENERIC64
[   1.0000000] total memory = 2028 MB
[   1.0000000] avail memory = 1967 MB
[   1.0000000] pool redzone disabled for 'buf4k'
[   1.0000000] pool redzone disabled for 'buf64k'
[   1.0000000] entropy: no seed from bootloader
[   1.0000000] armfdt0 (root)
[   1.0000000] simplebus0 at armfdt0: Firefly roc-rk3328-cc
[   1.0000000] cpus0 at simplebus0
[   1.0000000] simplebus1 at simplebus0
[   1.0000000] psci0 at simplebus0: PSCI 1.1
[   1.0000000] simplebus2 at simplebus0
[   1.0000000] cpu0 at cpus0: Arm Cortex-A53 r0p4 (v8-A), id 0x0
[   1.0000000] cpufreqdt0 at cpu0
[   1.0000000] cpu1 at cpus0: Arm Cortex-A53 r0p4 (v8-A), id 0x1
[   1.0000000] cpufreqdt1 at cpu1
[   1.0000000] cpu2 at cpus0: Arm Cortex-A53 r0p4 (v8-A), id 0x2
[   1.0000000] cpufreqdt2 at cpu2
[   1.0000000] cpu3 at cpus0: Arm Cortex-A53 r0p4 (v8-A), id 0x3
[   1.0000000] cpufreqdt3 at cpu3
[   1.0000000] gic0 at simplebus0: GIC
[   1.0000000] armgic0 at gic0: Generic Interrupt Controller, 160 sources (149 valid)
[   1.0000000] armgic0: 16 Priorities, 128 SPIs, 6 PPIs, 15 SGIs
[   1.0000000] syscon0 at simplebus0: System Controller Registers
[   1.0000000] fclock0 at simplebus0: 24000000 Hz fixed clock (xin24m)
[   1.0000000] syscon1 at simplebus0: System Controller Registers
[   1.0000000] fclock1 at simplebus0: 125000000 Hz fixed clock (gmac_clkin)
[   1.0000000] gtmr0 at simplebus0: Generic Timer
[   1.0000000] gtmr0: interrupting on GIC irq 27
[   1.0000000] armgtmr0 at gtmr0: Generic Timer (24000 kHz, virtual)
[   1.0000030] rkcru0 at simplebus0: RK3328 CRU
[   1.0000030] rkiomux0 at simplebus0: RK3328 IOMUX control
[   1.0000030] rkgpio0 at rkiomux0: GPIO (gpio0@ff210000)
[   1.0000030] gpio0 at rkgpio0: 32 pins
[   1.0000030] rkgpio1 at rkiomux0: GPIO (gpio1@ff220000)
[   1.0000030] gpio1 at rkgpio1: 32 pins
[   1.0000030] rkgpio2 at rkiomux0: GPIO (gpio2@ff230000)
[   1.0000030] gpio2 at rkgpio2: 32 pins
[   1.0000030] rkgpio3 at rkiomux0: GPIO (gpio3@ff240000)
[   1.0000030] gpio3 at rkgpio3: 32 pins
[   1.0000030] rkiic0 at simplebus0: Rockchip I2C (100000 Hz)
[   1.0000030] iic0 at rkiic0: I2C bus
[   1.0000030] rkpmic0 at iic0 addr 0x18: RK805 Power Management and Real Time Clock IC
[   1.0000030] rkreg0 at rkpmic0: vdd_logic
[   1.0000030] rkreg1 at rkpmic0: vdd_arm
[   1.0000030] rkreg2 at rkpmic0: vcc_ddr
[   1.0000030] rkreg3 at rkpmic0: vcc_io
[   1.0000030] rkreg4 at rkpmic0: vcc_18
[   1.0000030] rkreg5 at rkpmic0: vcc18_emmc
[   1.0000030] rkreg6 at rkpmic0: vdd_10
[   1.0000030] gregulator0 at simplebus0: vcc_sdio
[   1.0000030] gregulator0: cannot get pin 0
[   1.0000030] fregulator0 at simplebus0: vcc_sys
[   1.0000030] fregulator1 at simplebus0: vcc_sd
[   1.0000030] fregulator2 at simplebus0: vcc_phy
[   1.0000030] fregulator3 at simplebus0: dc_12v
[   1.0000030] com0 at simplebus0: ns16550a, working fifo
[   1.0000030] com0: console
[   1.0000030] com0: interrupting on GIC irq 89
[   1.0000030] fregulator4 at simplebus0: vcc_host1_5v
[   1.0000030] rkdrm0 at simplebus0
[   1.0000030] rkusb0 at syscon1: USB2 PHY
[   1.0000030] rkusbphy0 at rkusb0: USB2 OTG port
[   1.0000030] rkusbphy1 at rkusb0: USB2 host port
[   1.0000030] /opp_table0 at simplebus0 not configured
[   1.0000030] /vop@ff370000 at simplebus0 not configured
[   1.0000030] /hdmi@ff3c0000 at simplebus0 not configured
[   1.0000030] /amba/dmac@ff1f0000 at simplebus1 not configured
[   1.0000030] rktsadc0 at simplebus0: RK3328/3399 Temperature Sensor ADC
: could not get TSHUT mode, default to GPIO: could not get TSHUT polarity, default to lowrktsadc0: interrupting on GIC irq 90
[   1.0000030] /iommu@ff350800 at simplebus0 not configured
[   1.0000030] /syscon@ff100000/power-controller at syscon0 not configured
[   1.0000030] /iommu@ff373f00 at simplebus0 not configured
[   1.0000030] /phy@ff430000 at simplebus0 not configured
[   1.0000030] /efuse@ff260000 at simplebus0 not configured
[   1.0000030] /syscon@ff100000/grf-gpio at syscon0 not configured
[   1.0000030] /syscon@ff100000/io-domains at syscon0 not configured
[   1.0000030] dwcwdt0 at simplebus0: couldn't enable clock
[   1.0000030] /gpu@ff300000 at simplebus0 not configured
[   1.0000030] /video-codec@ff350000 at simplebus0 not configured
[   1.0000030] dwcmmc0 at simplebus0: DesignWare SD/MMC
[   1.0000030] dwcmmc0: interrupting on GIC irq 44
[   1.0000030] dwcmmc1 at simplebus0: DesignWare SD/MMC
[   1.0000030] dwcmmc1: interrupting on GIC irq 46
[   1.0000030] awge0 at simplebus0: GMAC
[   1.0000030] awge0: Core version: 00001035
[   1.0000030] awge0: Ethernet address [_MAC_XXXXXXXXXX]
[   1.0000030] awge0: HW feature mask: d0f17
[   1.0000030] rgephy0 at awge0 phy 0: RTL8211E 1000BASE-T media interface
[   1.0000030] rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
[   1.0000030] rgephy1 at awge0 phy 1: RTL8211E 1000BASE-T media interface
[   1.0000030] rgephy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
[   1.0000030] awge0: interrupting on GIC irq 56
[   1.0000030] dwctwo0 at simplebus0: mode 'otg' not supported
[   1.0000030] ehci0 at simplebus0: EHCI
[   1.0000030] ehci0: interrupting on GIC irq 48
[   1.0000030] ehci0: 1 companion controller, 1 port
[   1.0000030] usb0 at ehci0: USB revision 2.0
[   1.0000030] ohci0 at simplebus0: OHCI
[   1.0000030] ohci0: interrupting on GIC irq 49
[   1.0000030] ohci0: OHCI version 1.0
[   1.0000030] usb1 at ohci0: USB revision 1.0
[   1.0000030] armpmu0 at simplebus0: Performance Monitor Unit
[   1.0000030] gpioleds0 at simplebus0:
[   1.0000030] /syscon@ff100000/reboot-mode at syscon0 not configured
[   1.0000030] rkdrm0: no display interface ports configured
[   1.0000030] rkdrm0: couldn't register DRM device: -6
[   1.0000030] entropy: WARNING: extracting entropy too early
[   1.9392124] cpufreqdt0: rate: 1296.000 MHz, 1300000 uV
[   1.9392124] sdmmc0 at dwcmmc0
[   1.9392124] sdmmc1 at dwcmmc1
[   1.9492186] armpmu0: interrupting on GIC irq 132
[   1.9492186] armpmu0: interrupting on GIC irq 133
[   1.9492186] armpmu0: interrupting on GIC irq 134
[   1.9492186] armpmu0: interrupting on GIC irq 135
[   1.9592161] uhub0 at usb0: NetBSD (0x0000) EHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1
[   1.9692173] uhub1 at usb1: NetBSD (0x0000) OHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1
[   2.0392165] sdmmc1: sdmmc_mem_enable failed with error 60
[   2.0392165] sdmmc1: couldn't enable card: 60
[   2.0792174] sdmmc0: SD card status: 4-bit, C10, U1, A1
[   2.0792174] ld0 at sdmmc0: <0x03:0x5344:SC32G:0x80:0xc1ce13bb:0x121>
[   2.0792174] ld0: 30436 MB, 7729 cyl, 128 head, 63 sec, 512 bytes/sect x 62333952 sectors
[   2.0892218] dk0 at ld0: "EFI", 163840 blocks at 32768, type: msdos
[   2.0892218] dk1 at ld0: "netbsd-root", 62136320 blocks at 196608, type: ffs
[   2.0892218] ld0: 4-bit width, High-Speed/SDR25, 50.000 MHz
[   2.6892315] WARNING: 8 errors while detecting hardware; check system log.
[   2.6892315] boot device: dk1
[   2.6892315] root on dk1
[   2.6992339] root file system type: ffs
[   2.6992339] kern.module.path=/stand/evbarm/9.99.68/modules
[   2.7092337] WARNING: clock lost 1612 days
[   2.7092337] WARNING: using filesystem time
[   2.7131496] WARNING: CHECK AND RESET THE DATE!