Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2020-07-02 13:24:30
From: @nrgmilk_
Description: Raspberry pi 4 8GB, FreeBSD 13.0-CURRENT r362882 patched D25068 arm64
U-Boot 2020.07-rc5-00160-gbcfe764ee9-dirty (Jul 02 2020 - 21:50:14 +0900)
DRAM: 7.9 GiB
RPI 4 Model B (0xd03114)
MMC: mmc@7e300000: 1, emmc2@7e340000: 0
Loading Environment from FAT... In: serial
Out: vidconsole
Err: vidconsole
Net: eth0: ethernet@7d580000
Hit any key to stop autoboot: 0
U-Boot> boot
switch to partitions #0, OK
mmc0 is current device
Scanning mmc 0:1...
Found EFI removable media binary efi/boot/bootaa64.efi
libfdt fdt_check_header(): FDT_ERR_BADMAGIC
Scanning disk [_EMAIL_XXXXXXX]...
Disk [_EMAIL_XXXXXXX] not ready
Scanning disk [_EMAIL_XXXXXXXXX]...
** Unrecognized filesystem type **
Found 3 disks
BootOrder not defined
EFI boot manager: Cannot load any image
694960 bytes read in 51 ms (13 MiB/s)
libfdt fdt_check_header(): FDT_ERR_BADMAGIC
Consoles: EFI console
Reading loader env vars from /efi/freebsd/loader.env
Setting currdev to disk0p1:
FreeBSD/arm64 EFI loader, Revision 1.1
(Thu Jun 25 08:19:31 UTC 2020 [_EMAIL_XXXXXXXXXXXXXXXXXXX])
Command line arguments: loader.efi
Image base: 0x39e86000
EFI version: 2.80
EFI Firmware: Das U-Boot (rev 8224.1792)
Console: comconsole (0)
Load Path: /efi\boot\bootaa64.efi
Load Device: /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/SD(0)/SD(0)/HD(1,0x01,0,0x81f,0x18fa8)
Trying ESP: /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/SD(0)/SD(0)/HD(1,0x01,0,0x81f,0x18fa8)
Setting currdev to disk0p1:
Trying: /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/SD(0)/SD(0)/HD(2,0x01,0,0x197c7,0x1d92839)
Setting currdev to disk0p2:
Loading /boot/defaults/loader.conf
Loading /boot/defaults/loader.conf
Loading /boot/device.hints
Loading /boot/loader.conf
Loading /boot/loader.conf.local
Loading kernel...
/boot/kernel/kernel text=0x9cba5c data=0x1976d8 data=0x0+0x3a15de syms=[0x8+0x115350+0x8+0x13a73c]
Loading configured modules...
/etc/hostid size=0x25
/boot/entropy size=0x1000
/boot/kernel/umodem.ko text=0x2100 text=0x1390 data=0x6e0+0x10 syms=[0x8+0xf48+0x8+0xb6e]
Hit [Enter] to boot immediately, or any other key for command prompt.
Booting [/boot/kernel/kernel]...
Using DTB provided by EFI at 0x7ef1000.
EFI framebuffer information:
addr, size 0x3e4e0000, 0x6d8c00
dimensions 1824 x 984
stride 1824
masks 0x00ff0000, 0x0000ff00, 0x000000ff, 0xff000000
---<<BOOT>>---
KDB: debugger backends: ddb
KDB: current backend: ddb
Copyright (c) 1992-2020 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 13.0-CURRENT #0 r362882M: Thu Jul 2 17:51:40 JST 2020
[_EMAIL_XXXXXX]:/usr/obj/z2/src/D25068/arm64.aarch64/sys/GENERIC arm64
FreeBSD clang version 10.0.0 ([_EMAIL_XXXXX]:llvm/llvm-project.git llvmorg-10.0.0-0-gd32170dbd5b)
WARNING: WITNESS option enabled, expect reduced performance.
VT(efifb): resolution 1824x984
module firmware already present!
KLD file umodem.ko is missing dependencies
module_register: cannot register simplebus/gpio from kernel; already loaded from kernel
Module simplebus/gpio failed to register: 17
module_register: cannot register simplebus/pcib from kernel; already loaded from kernel
Module simplebus/pcib failed to register: 17
Starting CPU 1 (1)
Starting CPU 2 (2)
Starting CPU 3 (3)
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
random: unblocking device.
random: entropy device external interface
MAP 39f38000 mode 2 pages 1
MAP 39f3e000 mode 2 pages 2
MAP 3b350000 mode 2 pages 16
MAP fe100000 mode 0 pages 1
WARNING: Device "openfirm" is Giant locked and may be deleted before FreeBSD 13.0.
WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 13.0.
kbd0 at kbdmux0
ofwbus0: <Open Firmware Device Tree>
simplebus0: <Flattened device tree simple bus> on ofwbus0
ofw_clkbus0: <OFW clocks bus> on ofwbus0
clk_fixed0: <Fixed clock> on ofw_clkbus0
clk_fixed1: <Fixed clock> on ofw_clkbus0
clk_fixed2: <Fixed clock> on ofwbus0
simplebus1: <Flattened device tree simple bus> on ofwbus0
regfix0: <Fixed Regulator> on ofwbus0
regfix1: <Fixed Regulator> on ofwbus0
simplebus2: <Flattened device tree simple bus> on ofwbus0
simplebus3: <Flattened device tree simple bus> on ofwbus0
regfix2: <Fixed Regulator> on ofwbus0
simple_mfd0: <Simple MFD (Multi-Functions Device)> mem 0x7d5d2000-0x7d5d2eff on simplebus0
psci0: <ARM Power State Co-ordination Interface Driver> on ofwbus0
gic0: <ARM Generic Interrupt Controller> mem 0x40041000-0x40041fff,0x40042000-0x40043fff,0x40044000-0x40045fff,0x40046000-0x40047fff irq 31 on simplebus0
gic0: pn 0x2, arch 0x2, rev 0x1, implementer 0x43b irqs 256
gpioregulator0: <GPIO controlled regulator> on ofwbus0
gpioregulator0: cannot get pin 0
gpioregulator0: cannot parse parameters
device_attach: gpioregulator0 attach returned 6
generic_timer0: <ARMv8 Generic Timer> irq 4,5,6,7 on ofwbus0
Timecounter "ARM MPCore Timecounter" frequency 54000000 Hz quality 1000
Event timer "ARM MPCore Eventtimer" frequency 54000000 Hz quality 1000
gpioregulator0: <GPIO controlled regulator> on ofwbus0
gpioregulator0: cannot get pin 0
gpioregulator0: cannot parse parameters
device_attach: gpioregulator0 attach returned 6
gpioregulator0: <GPIO controlled regulator> on ofwbus0
gpioregulator0: cannot get pin 0
gpioregulator0: cannot parse parameters
device_attach: gpioregulator0 attach returned 6
gpioregulator0: <GPIO controlled regulator> on ofwbus0
gpioregulator0: cannot get pin 0
gpioregulator0: cannot parse parameters
device_attach: gpioregulator0 attach returned 6
gpioregulator0: <GPIO controlled regulator> on ofwbus0
gpioregulator0: cannot get pin 0
gpioregulator0: cannot parse parameters
device_attach: gpioregulator0 attach returned 6
usb_nop_xceiv0: <USB NOP PHY> on ofwbus0
gpioregulator0: <GPIO controlled regulator> on ofwbus0
gpioregulator0: cannot get pin 0
gpioregulator0: cannot parse parameters
device_attach: gpioregulator0 attach returned 6
mbox0: <BCM2835 VideoCore Mailbox> mem 0x7e00b880-0x7e00b8bf irq 14 on simplebus0
uart0: <PrimeCell UART (PL011)> mem 0x7e201000-0x7e2011ff irq 17 on simplebus0
uart0: console (115200,n,8,1)
spi0: <BCM2708/2835 SPI controller> mem 0x7e204000-0x7e2041ff irq 19 on simplebus0
spibus0: <OFW SPI bus> on spi0
spibus0: <unknown card> at cs 0 mode 0
spibus0: <unknown card> at cs 1 mode 0
iichb0: <BCM2708/2835 BSC controller> mem 0x7e804000-0x7e804fff irq 27 on simplebus0
bcm_dma0: <BCM2835 DMA Controller> mem 0x7e007000-0x7e007aff irq 32,33,34,35,36,37,38,39,40,41,42 on simplebus0
bcmwd0: <BCM2708/2835 Watchdog> mem 0x7e100000-0x7e100113,0x7e00a000-0x7e00a023,0x7ec11000-0x7ec1101f on simplebus0
sdhci_bcm0: <Broadcom 2708 SDHCI controller> mem 0x7e300000-0x7e3000ff irq 63 on simplebus0
mmc0: <MMC/SD bus> on sdhci_bcm0
fb0: <BCM2835 VT framebuffer driver> on simplebus0
fb0: keeping existing fb bpp of 32
fbd0 on fb0
WARNING: Device "fb" is Giant locked and may be deleted before FreeBSD 13.0.
VT: Replacing driver "efifb" with new "fb".
uma_zalloc_debug: zone "kenv" with the following non-sleepable locks held:
exclusive sleep mutex vtdev (vtdev) r = 0 (0xffff000000a0ec78) locked @ /z2/src/D25068/sys/dev/vt/vt_core.c:2818
stack backtrace:
#0 0xffff000000484b98 at witness_debugger+0x64
#1 0xffff000000485ba8 at witness_warn+0x3f0
#2 0xffff0000006ea660 at uma_zalloc_debug+0x2c
#3 0xffff0000006ea0c8 at uma_zalloc_arg+0x2c
#4 0xffff0000003c9aa4 at getenv_string_buffer+0x40
#5 0xffff0000003ca1c0 at getenv_quad+0x14
#6 0xffff0000003ca190 at getenv_int+0x14
#7 0xffff0000002d3d54 at vt_fb_init+0xbc
#8 0xffff0000002d8c00 at vt_replace_backend+0x10c
#9 0xffff0000002d3e8c at vt_fb_attach+0x14
#10 0xffff00000019dd38 at fbd_register+0xec
#11 0xffff0000004523e8 at device_attach+0x400
#12 0xffff000000451f50 at device_probe_and_attach+0x7c
#13 0xffff000000748f74 at bcm_fb_attach+0x280
#14 0xffff0000004523e8 at device_attach+0x400
#15 0xffff000000451f50 at device_probe_and_attach+0x7c
#16 0xffff000000454134 at bus_generic_new_pass+0xf8
#17 0xffff0000004540e4 at bus_generic_new_pass+0xa8
fb0: 1824x984(1824x984@0,0) 32bpp
fb0: fbswap: 1, pitch 7296, base 0x3e4e0000, screen_size 7237632
pmu0: <Performance Monitoring Unit> irq 0,1,2,3 on ofwbus0
cpulist0: <Open Firmware CPU Group> on ofwbus0
cpu0: <Open Firmware CPU> on cpulist0
bcm2835_cpufreq0: <CPU Frequency Control> on cpu0
cpu1: <Open Firmware CPU> on cpulist0
cpu2: <Open Firmware CPU> on cpulist0
cpu3: <Open Firmware CPU> on cpulist0
pcib0: <BCM2838-compatible PCI-express controller> mem 0x7d500000-0x7d50930f irq 69,70 on simplebus1
pcib0: hardware identifies as revision 0x304.
pci0: <PCI bus> on pcib0
pcib1: <PCI-PCI bridge> irq 81 at device 0.0 on pci0
pcib0: Failed to translate resource 0-fffff type 3 for pcib1
pcib1: failed to allocate initial prefetch window: 0-0xfffff
pci1: <PCI bus> on pcib1
xhci0: <XHCI (generic) USB 3.0 controller> irq 82 at device 0.0 on pci1
xhci0: 32 bytes context size, 64-bit DMA
xhci0: Controller reset timeout.
xhci0: XHCI halt/start/probe failed err=18
xhci0: Controller reset timeout.
device_attach: xhci0 attach returned 6
genet0: <RPi4 Gigabit Ethernet> mem 0x7d580000-0x7d58ffff irq 71,72 on simplebus1
genet0: GENET version 5.0 phy 0x0000
miibus0: <MII bus> on genet0
brgphy0: <BCM54213PE 1000BASE-T media interface> PHY 1 on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto
genet0: Ethernet address: [_MAC_XXXXXXXXXX]
gpioled0: <GPIO LEDs> on ofwbus0
gpioled0: <led0> failed to map pin
gpioled0: <led1> failed to map pin
gpioregulator0: <GPIO controlled regulator> on ofwbus0
gpioregulator0: cannot get pin 0
gpioregulator0: cannot parse parameters
device_attach: gpioregulator0 attach returned 6
sdhci_bcm1: <Broadcom 2708 SDHCI controller> mem 0x7e340000-0x7e3400ff irq 80 on simplebus3
mmc1: <MMC/SD bus> on sdhci_bcm1
cryptosoft0: <software crypto>
Timecounters tick every 1.000 msec
Obsolete code will be removed soon: random(9) is the obsolete Park-Miller LCG from 1988
usb_needs_explore_all: no devclass
iicbus0: <OFW I2C bus> on iichb0
iic0: <I2C generic I/O> on iicbus0
sdhci_bcm0-slot0: Got command interrupt 0x00030000, but there is no active command.
sdhci_bcm0-slot0: ============== REGISTER DUMP ==============
sdhci_bcm0-slot0: Sys addr: 0x00000000 | Version: 0x00009902
sdhci_bcm0-slot0: Blk size: 0x00000000 | Blk cnt: 0x00000000
sdhci_bcm0-slot0: Argument: 0x000001aa | Trn mode: 0x00000000
sdhci_bcm0-slot0: Present: 0x000f0000 | Host ctl: 0x00000001
sdhci_bcm0-slot0: Power: 0x0000000f | Blk gap: 0x00000000
sdhci_bcm0-slot0: Wake-up: 0x00000000 | Clock: 0x00003947
sdhci_bcm0-slot0: Timeout: 0x00000000 | Int stat: 0x00000000
sdhci_bcm0-slot0: Int enab: 0x01ff00bb | Sig enab: 0x01ff00bb
sdhci_bcm0-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000
sdhci_bcm0-slot0: Caps: 0x00000000 | Caps2: 0x00000000
sdhci_bcm0-slot0: Max curr: 0x00000001 | ADMA err: 0x00000000
sdhci_bcm0-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000
sdhci_bcm0-slot0: ===========================================
sdhci_bcm0-slot0: Got command interrupt 0x00030000, but there is no active command.
sdhci_bcm0-slot0: ============== REGISTER DUMP ==============
sdhci_bcm0-slot0: Sys addr: 0x00000000 | Version: 0x00009902
sdhci_bcm0-slot0: Blk size: 0x00000000 | Blk cnt: 0x00000000
sdhci_bcm0-slot0: Argument: 0x000001aa | Trn mode: 0x00000000
sdhci_bcm0-slot0: Present: 0x000f0000 | Host ctl: 0x00000001
sdhci_bcm0-slot0: Power: 0x0000000f | Blk gap: 0x00000000
sdhci_bcm0-slot0: Wake-up: 0x00000000 | Clock: 0x00003947
sdhci_bcm0-slot0: Timeout: 0x00000000 | Int stat: 0x00000000
sdhci_bcm0-slot0: Int enab: 0x01ff00bb | Sig enab: 0x01ff00bb
sdhci_bcm0-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000
sdhci_bcm0-slot0: Caps: 0x00000000 | Caps2: 0x00000000
sdhci_bcm0-slot0: Max curr: 0x00000001 | ADMA err: 0x00000000
sdhci_bcm0-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000
sdhci_bcm0-slot0: ===========================================
sdhci_bcm0-slot0: Got command interrupt 0x00030000, but there is no active command.
sdhci_bcm0-slot0: ============== REGISTER DUMP ==============
sdhci_bcm0-slot0: Sys addr: 0x00000000 | Version: 0x00009902
sdhci_bcm0-slot0: Blk size: 0x00000000 | Blk cnt: 0x00000000
sdhci_bcm0-slot0: Argument: 0x000001aa | Trn mode: 0x00000000
sdhci_bcm0-slot0: Present: 0x000f0000 | Host ctl: 0x00000001
sdhci_bcm0-slot0: Power: 0x0000000f | Blk gap: 0x00000000
sdhci_bcm0-slot0: Wake-up: 0x00000000 | Clock: 0x00003947
sdhci_bcm0-slot0: Timeout: 0x00000000 | Int stat: 0x00000000
sdhci_bcm0-slot0: Int enab: 0x01ff00bb | Sig enab: 0x01ff00bb
sdhci_bcm0-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000
sdhci_bcm0-slot0: Caps: 0x00000000 | Caps2: 0x00000000
sdhci_bcm0-slot0: Max curr: 0x00000001 | ADMA err: 0x00000000
sdhci_bcm0-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000
sdhci_bcm0-slot0: ===========================================
sdhci_bcm0-slot0: Got command interrupt 0x00030000, but there is no active command.
sdhci_bcm0-slot0: ============== REGISTER DUMP ==============
sdhci_bcm0-slot0: Sys addr: 0x00000000 | Version: 0x00009902
sdhci_bcm0-slot0: Blk size: 0x00000000 | Blk cnt: 0x00000000
sdhci_bcm0-slot0: Argument: 0x000001aa | Trn mode: 0x00000000
sdhci_bcm0-slot0: Present: 0x000f0000 | Host ctl: 0x00000001
sdhci_bcm0-slot0: Power: 0x0000000f | Blk gap: 0x00000000
sdhci_bcm0-slot0: Wake-up: 0x00000000 | Clock: 0x00003947
sdhci_bcm0-slot0: Timeout: 0x00000000 | Int stat: 0x00000000
sdhci_bcm0-slot0: Int enab: 0x01ff00bb | Sig enab: 0x01ff00bb
sdhci_bcm0-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000
sdhci_bcm0-slot0: Caps: 0x00000000 | Caps2: 0x00000000
sdhci_bcm0-slot0: Max curr: 0x00000001 | ADMA err: 0x00000000
sdhci_bcm0-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000
sdhci_bcm0-slot0: ===========================================
sdhci_bcm0-slot0: Got command interrupt 0x00030000, but there is no active command.
sdhci_bcm0-slot0: ============== REGISTER DUMP ==============
sdhci_bcm0-slot0: Sys addr: 0x00000000 | Version: 0x00009902
sdhci_bcm0-slot0: Blk size: 0x00000000 | Blk cnt: 0x00000000
sdhci_bcm0-slot0: Argument: 0x00000000 | Trn mode: 0x00000000
sdhci_bcm0-slot0: Present: 0x000f0000 | Host ctl: 0x00000001
sdhci_bcm0-slot0: Power: 0x0000000f | Blk gap: 0x00000000
sdhci_bcm0-slot0: Wake-up: 0x00000000 | Clock: 0x00003947
sdhci_bcm0-slot0: Timeout: 0x00000000 | Int stat: 0x00000000
sdhci_bcm0-slot0: Int enab: 0x01ff00bb | Sig enab: 0x01ff00bb
sdhci_bcm0-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000
sdhci_bcm0-slot0: Caps: 0x00000000 | Caps2: 0x00000000
sdhci_bcm0-slot0: Max curr: 0x00000001 | ADMA err: 0x00000000
sdhci_bcm0-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000
sdhci_bcm0-slot0: ===========================================
sdhci_bcm0-slot0: Got command interrupt 0x00030000, but there is no active command.
sdhci_bcm0-slot0: ============== REGISTER DUMP ==============
sdhci_bcm0-slot0: Sys addr: 0x00000000 | Version: 0x00009902
sdhci_bcm0-slot0: Blk size: 0x00000000 | Blk cnt: 0x00000000
sdhci_bcm0-slot0: Argument: 0x00000000 | Trn mode: 0x00000000
sdhci_bcm0-slot0: Present: 0x000f0000 | Host ctl: 0x00000001
sdhci_bcm0-slot0: Power: 0x0000000f | Blk gap: 0x00000000
sdhci_bcm0-slot0: Wake-up: 0x00000000 | Clock: 0x00003947
sdhci_bcm0-slot0: Timeout: 0x00000000 | Int stat: 0x00000000
sdhci_bcm0-slot0: Int enab: 0x01ff00bb | Sig enab: 0x01ff00bb
sdhci_bcm0-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000
sdhci_bcm0-slot0: Caps: 0x00000000 | Caps2: 0x00000000
sdhci_bcm0-slot0: Max curr: 0x00000001 | ADMA err: 0x00000000
sdhci_bcm0-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000
sdhci_bcm0-slot0: ===========================================
sdhci_bcm0-slot0: Got command interrupt 0x00030000, but there is no active command.
sdhci_bcm0-slot0: ============== REGISTER DUMP ==============
sdhci_bcm0-slot0: Sys addr: 0x00000000 | Version: 0x00009902
sdhci_bcm0-slot0: Blk size: 0x00000000 | Blk cnt: 0x00000000
sdhci_bcm0-slot0: Argument: 0x00000000 | Trn mode: 0x00000000
sdhci_bcm0-slot0: Present: 0x000f0000 | Host ctl: 0x00000001
sdhci_bcm0-slot0: Power: 0x0000000f | Blk gap: 0x00000000
sdhci_bcm0-slot0: Wake-up: 0x00000000 | Clock: 0x00003947
sdhci_bcm0-slot0: Timeout: 0x00000000 | Int stat: 0x00000000
sdhci_bcm0-slot0: Int enab: 0x01ff00bb | Sig enab: 0x01ff00bb
sdhci_bcm0-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000
sdhci_bcm0-slot0: Caps: 0x00000000 | Caps2: 0x00000000
sdhci_bcm0-slot0: Max curr: 0x00000001 | ADMA err: 0x00000000
sdhci_bcm0-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000
sdhci_bcm0-slot0: ===========================================
sdhci_bcm0-slot0: Got command interrupt 0x00030000, but there is no active command.
sdhci_bcm0-slot0: ============== REGISTER DUMP ==============
sdhci_bcm0-slot0: Sys addr: 0x00000000 | Version: 0x00009902
sdhci_bcm0-slot0: Blk size: 0x00000000 | Blk cnt: 0x00000000
sdhci_bcm0-slot0: Argument: 0x00000000 | Trn mode: 0x00000000
sdhci_bcm0-slot0: Present: 0x000f0000 | Host ctl: 0x00000001
sdhci_bcm0-slot0: Power: 0x0000000f | Blk gap: 0x00000000
sdhci_bcm0-slot0: Wake-up: 0x00000000 | Clock: 0x00003947
sdhci_bcm0-slot0: Timeout: 0x00000000 | Int stat: 0x00000000
sdhci_bcm0-slot0: Int enab: 0x01ff00bb | Sig enab: 0x01ff00bb
sdhci_bcm0-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000
sdhci_bcm0-slot0: Caps: 0x00000000 | Caps2: 0x00000000
sdhci_bcm0-slot0: Max curr: 0x00000001 | ADMA err: 0x00000000
sdhci_bcm0-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000
sdhci_bcm0-slot0: ===========================================
mmc0: No compatible cards found on bus
bcm2835_cpufreq0: ARM 600MHz, Core 200MHz, SDRAM 400MHz, Turbo OFF
mmcsd0: 16GB <SDHC SE16G 8.0 SN 03B1C5E3 MFG 12/2014 by 3 SD> at mmc1 50.0MHz/4bit/65535-block
Trying to mount root from ufs:/dev/ufs/rootfs [rw]...
Release APs...done
CPU 0: ARM Cortex-A72 r0p3 affinity: 0
Cache Type = <64 byte D-cacheline,64 byte I-cacheline,PIPT ICache,64 byte ERG,64 byte CWG>
Instruction Set Attributes 0 = <CRC32>
Instruction Set Attributes 1 = <>
Processor Features 0 = <AdvSIMD,FP,EL3 32,EL2 32,EL1 32,EL0 32>
Processor Features 1 = <>
Memory Model Features 0 = <TGran4,TGran64,SNSMem,BigEnd,16bit ASID,16TB PA>
Memory Model Features 1 = <8bit VMID>
Memory Model Features 2 = <32bit CCIDX,48bit VA>
Debug Features 0 = <2 CTX BKPTs,4 Watchpoints,6 Breakpoints,PMUv3,Debugv8>
Debug Features 1 = <>
Auxiliary Features 0 = <>
Auxiliary Features 1 = <>
CPU 1: ARM Cortex-A72 r0p3 affinity: 1
CPU 2: ARM Cortex-A72 r0p3 affinity: 2
CPU 3: ARM Cortex-A72 r0p3 affinity: 3
WARNING: WITNESS option enabled, expect reduced performance.
Warning: no time-of-day clock registered, system time will not be set accurately
Setting hostuuid: 30303031-3030-3030-3861-663762306639.
Setting hostid: 0xec9ad8b3.
No suitable dump device was found.
Starting file system checks:
/dev/ufs/rootfs: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ufs/rootfs: clean, 3045205 free (2685 frags, 380315 blocks, 0.1% fragmentation)
Mounting local filesystems:.
ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/local/lib /usr/local/lib/compat/pkg /usr/local/lib/compat/pkg
Setting hostname: rpi4.
Setting up harvesting: [UMA],[FS_ATIME],SWI,INTERRUPT,NET_NG,[NET_ETHER],NET_TUN,MOUSE,KEYBOARD,ATTACH,CACHED
Feeding entropy: .
lo0: link state changed to UP
genet0: link state changed to DOWN
Starting Network: lo0 genet0.
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
options=680003<RXCSUM,TXCSUM,LINKSTATE,RXCSUM_IPV6,TXCSUM_IPV6>
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x2
inet[_IP_XXXX] netmask 0xff000000
groups: lo
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
genet0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=68000b<RXCSUM,TXCSUM,VLAN_MTU,LINKSTATE,RXCSUM_IPV6,TXCSUM_IPV6>
ether [_MAC_XXXXXXXXXX]
media: Ethernet autoselect (none)
status: no carrier
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
Starting devd.
genet0: link state changed to UP
Starting dhclient.
DHCPREQUEST on genet0 to[_IP_XXXXXXXXXX] port 67
DHCPACK from[_IP_XXXXXX]
bound to[_IP_XXXXXX] -- renewal in 129600 seconds.
add host[_IP_XXXX]: gateway lo0 fib 0: route already in table
add host ::1: gateway lo0 fib 0: route already in table
add net fe80::: gateway ::1
add net ff02::: gateway ::1
add net ::ffff:0.0.0.0: gateway ::1
add net ::0.0.0.0: gateway ::1
Creating and/or trimming log files.
Starting syslogd.
Clearing /tmp (X related).
Updating motd:.
Mounting late filesystems:.
Updating /var/run/os-release done.
Configuring vt: blanktime.
Performing sanity check on sshd configuration.
Starting sshd.
Starting cron.
Starting background file system checks in 60 seconds.
Thu Jul 2 12:52:06 UTC 2020
FreeBSD/arm64 (rpi4) (ttyu0)
login: root