Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.


Date: 2020-07-23 20:15:49
From: lwunder
Description: FreeBSD/amd64 on Supermicro Super Server
---<<BOOT>>---
Copyright (c) 1992-2019 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 12.1-RELEASE-p6 GENERIC amd64
FreeBSD clang version 8.0.1 (tags/RELEASE_801/final 366581) (based on LLVM 8.0.1)
VT(efifb): resolution 1024x768
CPU: Intel(R) Xeon(R) CPU E5-1620 v3 @ 3.50GHz (3500.07-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x306f2  Family=0x6  Model=0x3f  Stepping=2
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x7ffefbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
  AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
  AMD Features2=0x21<LAHF,ABM>
  Structured Extended Features=0x37ab<FSGSBASE,TSCADJ,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,PQM,NFPUSG>
  Structured Extended Features3=0x9c000000<IBPB,STIBP,L1DFL,SSBD>
  XSAVE Features=0x1<XSAVEOPT>
  VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr
  TSC: P-state invariant, performance statistics
real memory  = 17179869184 (16384 MB)
avail memory = 16471343104 (15708 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <SUPERM SMCI--MB>
FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 hardware threads
random: unblocking device.
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
Launching APs: 1 4 6 5 2 3 7
Timecounter "TSC-low" frequency 1750033700 Hz quality 1000
random: entropy device external interface
000.000017 [4335] netmap_init               netmap: loaded module
[ath_hal] loaded
module_register_init: MOD_LOAD (vesa, 0xffffffff8112e0f0, 0) error 19
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
kbd1 at kbdmux0
nexus0
efirtc0: <EFI Realtime Clock> on motherboard
efirtc0: registered as a time-of-day clock, resolution 1.000000s
cryptosoft0: <software crypto> on motherboard
acpi0: <> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71,0x74-0x77 irq 8 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
pcib0: <ACPI Host-PCI bridge> on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <dasp, performance counters> at device 11.1 (no driver attached)
pci0: <dasp, performance counters> at device 11.2 (no driver attached)
pci0: <dasp, performance counters> at device 16.1 (no driver attached)
pci0: <dasp, performance counters> at device 16.6 (no driver attached)
pci0: <dasp, performance counters> at device 18.1 (no driver attached)
acpi_syscontainer0: <System Container> on acpi0
pcib1: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 26 at device 1.0 on pci1
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 26 at device 1.1 on pci1
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> irq 40 at device 3.0 on pci1
pci4: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> irq 40 at device 3.2 on pci1
pci5: <ACPI PCI bus> on pcib5
pci1: <unknown> at device 17.0 (no driver attached)
ahci0: <Intel Wellsburg AHCI SATA controller> port 0xf110-0xf117,0xf100-0xf103,0xf0f0-0xf0f7,0xf0e0-0xf0e3,0xf020-0xf03f mem 0xfb338000-0xfb3387ff irq 16 at device 17.4 on pci1
ahci0: AHCI v1.30 with 4 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahciem0: <AHCI enclosure management bridge> at channel 2147483647 on ahci0
device_attach: ahciem0 attach returned 6
xhci0: <Intel Wellsburg USB 3.0 controller> mem 0xfb300000-0xfb30ffff irq 19 at device 20.0 on pci1
xhci0: 32 bytes context size, 64-bit DMA
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
pci1: <simple comms> at device 22.0 (no driver attached)
pci1: <simple comms> at device 22.1 (no driver attached)
ehci0: <Intel Wellsburg USB 2.0 controller> mem 0xfb334000-0xfb3343ff irq 18 at device 26.0 on pci1
usbus1: EHCI version 1.0
usbus1 on ehci0
usbus1: 480Mbps High Speed USB v2.0
pcib6: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci1
pci6: <ACPI PCI bus> on pcib6
pcib7: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci1
pci7: <ACPI PCI bus> on pcib7
igb0: <Intel(R) PRO/1000 PCI-Express Network Driver> port 0xe000-0xe01f mem 0xfb200000-0xfb27ffff,0xfb280000-0xfb283fff irq 16 at device 0.0 on pci7
igb0: Using 1024 TX descriptors and 1024 RX descriptors
igb0: Using 4 RX queues 4 TX queues
igb0: Using MSI-X interrupts with 5 vectors
igb0: Ethernet address: [_MAC_XXXXXXXXXX]
igb0: netmap queues/slots: TX 4/1024, RX 4/1024
pcib8: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci1
pci8: <ACPI PCI bus> on pcib8
igb1: <Intel(R) PRO/1000 PCI-Express Network Driver> port 0xd000-0xd01f mem 0xfb100000-0xfb17ffff,0xfb180000-0xfb183fff irq 17 at device 0.0 on pci8
igb1: Using 1024 TX descriptors and 1024 RX descriptors
igb1: Using 4 RX queues 4 TX queues
igb1: Using MSI-X interrupts with 5 vectors
igb1: Ethernet address: [_MAC_XXXXXXXXXX]
igb1: netmap queues/slots: TX 4/1024, RX 4/1024
pcib9: <ACPI PCI-PCI bridge> irq 18 at device 28.6 on pci1
pci9: <ACPI PCI bus> on pcib9
pcib10: <ACPI PCI-PCI bridge> at device 0.0 on pci9
pci10: <ACPI PCI bus> on pcib10
vgapci0: <VGA-compatible display> port 0xc000-0xc07f mem 0xfa000000-0xfaffffff,0xfb000000-0xfb01ffff irq 18 at device 0.0 on pci10
vgapci0: Boot video device
ehci1: <Intel Wellsburg USB 2.0 controller> mem 0xfb333000-0xfb3333ff irq 18 at device 29.0 on pci1
usbus2: EHCI version 1.0
usbus2 on ehci1
usbus2: 480Mbps High Speed USB v2.0
isab0: <PCI-ISA bridge> at device 31.0 on pci1
isa0: <ISA bus> on isab0
ahci1: <Intel Wellsburg AHCI SATA controller> port 0xf070-0xf077,0xf060-0xf063,0xf050-0xf057,0xf040-0xf043,0xf000-0xf01f mem 0xfb332000-0xfb3327ff irq 16 at device 31.2 on pci1
ahci1: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported
ahcich4: <AHCI channel> at channel 0 on ahci1
ahcich5: <AHCI channel> at channel 1 on ahci1
ahcich6: <AHCI channel> at channel 2 on ahci1
ahcich7: <AHCI channel> at channel 3 on ahci1
ahcich8: <AHCI channel> at channel 4 on ahci1
ahcich9: <AHCI channel> at channel 5 on ahci1
ahciem1: <AHCI enclosure management bridge> at channel 2147483647 on ahci1
device_attach: ahciem1 attach returned 6
acpi_button0: <Power Button> on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: console (115200,n,8,1)
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
Timecounters tick every 1.000 msec
ugen0.1: <0x8086 XHCI root HUB> at usbus0
ugen2.1: <Intel EHCI root HUB> at usbus2
ugen1.1: <Intel EHCI root HUB> at usbus1
uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <ST4000VN000-1H4168 SC46> ACS-2 ATA SATA 3.x device
ada0: [_SERIAL_NUMBER_XXXXX]
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 3815447MB (7814037168 512 byte sectors)
ada1 at ahcich1 bus 0 scbus1 target 0 lun 0
ada1: <WDC WD2002FAEX-007BA0 05.01D05> ATA8-ACS SATA 3.x device
ada1: [_SERIAL_NUMBER_XXXXXXXXXXXX]
ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 1907729MB (3907029168 512 byte sectors)
ada2 at ahcich2 bus 0 scbus2 target 0 lun 0
ada2: <WDC WD20EFRX-68AX9N0 80.00A80> ACS-2 ATA SATA 3.x device
ada2: [_SERIAL_NUMBER_XXXXXXXXXXXX]
ada2: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada2: Command Queueing enabled
ada2: 1907729MB (3907029168 512 byte sectors)
ada2: quirks=0x1<4K>
ada3 at ahcich3 bus 0 scbus3 target 0 lun 0
ada3: <LITEON CV8-CE128-11 SATA 128GB C17110B> ACS-2 ATA SATA 3.x device
ada3: [_SERIAL_NUMBER_XXXXXXXXXXXXXXXXX]
ada3: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 1024bytes)
ada3: Command Queueing enabled
ada3: 122104MB (250069680 512 byte sectors)
ada4 at ahcich4 bus 0 scbus4 target 0 lun 0
ada4: <Crucial CT256MX100SSD1 MU01> ACS-2 ATA SATA 3.x device
ada4: [_SERIAL_NUMBER_XXXXXXXXX]
ada4: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada4: Command Queueing enabled
ada4: 244198MB (500118192 512 byte sectors)
ada5 at ahcich5 bus 0 scbus5 target 0 lun 0
ada5: <WDC WD20EFRX-68AX9N0 80.00A80> ACS-2 ATA SATA 3.x device
ada5: [_SERIAL_NUMBER_XXXXXXXXXXXX]
ada5: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada5: Command Queueing enabled
ada5: 1907729MB (3907029168 512 byte sectors)
ada5: quirks=0x1<4K>
ada6 at ahcich6 bus 0 scbus6 target 0 lun 0
ada6: <ST4000VN000-1H4168 SC46> ACS-2 ATA SATA 3.x device
ada6: [_SERIAL_NUMBER_XXXXX]
ada6: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada6: Command Queueing enabled
ada6: 3815447MB (7814037168 512 byte sectors)
ada7 at ahcich7 bus 0 scbus7 target 0 lun 0
ada7: <ST4000VN000-1H4168 SC46> ACS-2 ATA SATA 3.x device
ada7: [_SERIAL_NUMBER_XXXXX]
ada7: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada7: Command Queueing enabled
ada7: 3815447MB (7814037168 512 byte sectors)
ada8 at ahcich8 bus 0 scbus8 target 0 lun 0
ada8: <ST4000VN000-1H4168 SC46> ACS-2 ATA SATA 3.x device
ada8: [_SERIAL_NUMBER_XXXXX]
ada8: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada8: Command Queueing enabled
ada8: 3815447MB (7814037168 512 byte sectors)
ada9 at ahcich9 bus 0 scbus9 target 0 lun 0
ada9: <ST4000VN000-1H4168 SC46> ACS-2 ATA SATA 3.x device
ada9: [_SERIAL_NUMBER_XXXXX]
ada9: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada9: Command Queueing enabled
ada9: 3815447MB (7814037168 512 byte sectors)
uhub2: Trying to mount root from ufs:/dev/label/freebsd_os [rw]...
2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub0: 21 ports with 21 removable, self powered
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
ugen0.2: <vendor 0x05e3 USB2.0 Hub> at usbus0
uhub3 on uhub0
uhub3: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/8.01, addr 1> on usbus0
uhub3: MTT enabled
ugen2.2: <vendor 0x8087 product 0x8002> at usbus2
uhub4 on uhub2
uhub4: <vendor 0x8087 product 0x8002, class 9/0, rev 2.00/0.05, addr 2> on usbus2
ugen1.2: <vendor 0x8087 product 0x800a> at usbus1
uhub5 on uhub1
uhub5: <vendor 0x8087 product 0x800a, class 9/0, rev 2.00/0.05, addr 2> on usbus1
uhub5: 6 ports with 6 removable, self powered
uhub4: 8 ports with 8 removable, self powered
uhub3: 4 ports with 4 removable, bus powered
ugen0.3: <LOGITECH G110 G-keys> at usbus0
ukbd0 on uhub3
ukbd0: <LOGITECH G110 G-keys, class 0/0, rev 2.00/1.01, addr 2> on usbus0
kbd2 at ukbd0
ugen0.4: <vendor 0x046d Gaming Keyboard G110> at usbus0
ukbd1 on uhub3
ukbd1: <vendor 0x046d Gaming Keyboard G110, class 0/0, rev 2.00/1.00, addr 3> on usbus0
kbd3 at ukbd1
ugen0.5: <vendor 0x0557 product 0x7000> at usbus0
uhub6 on uhub0
uhub6: <vendor 0x0557 product 0x7000, class 9/0, rev 2.00/0.00, addr 4> on usbus0
uhub6: 4 ports with 3 removable, self powered
ugen0.6: <vendor 0x0557 product 0x2419> at usbus0
ukbd2 on uhub6
ukbd2: <vendor 0x0557 product 0x2419, class 0/0, rev 1.10/1.00, addr 5> on usbus0
kbd4 at ukbd2
lo0: link state changed to UP
ioat0: <HSW IOAT Ch0> mem 0xfb32c000-0xfb32ffff irq 31 at device 4.0 on pci1
ioat0: Capabilities: 2f7<PQ,Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break>
ioat1: <HSW IOAT Ch1> mem 0xfb328000-0xfb32bfff irq 39 at device 4.1 on pci1
ioat1: Capabilities: 2f7<PQ,Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break>
ioat2: <HSW IOAT Ch2> mem 0xfb324000-0xfb327fff irq 31 at device 4.2 on pci1
ioat2: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break>
ioat3: <HSW IOAT Ch3> mem 0xfb320000-0xfb323fff irq 39 at device 4.3 on pci1
ioat3: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break>
ioat4: <HSW IOAT Ch4> mem 0xfb31c000-0xfb31ffff irq 31 at device 4.4 on pci1
ioat4: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break>
ioat5: <HSW IOAT Ch5> mem 0xfb318000-0xfb31bfff irq 39 at device 4.5 on pci1
ioat5: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break>
ioat6: <HSW IOAT Ch6> mem 0xfb314000-0xfb317fff irq 31 at device 4.6 on pci1
ioat6: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break>
ioat7: <HSW IOAT Ch7> mem 0xfb310000-0xfb313fff irq 39 at device 4.7 on pci1
ioat7: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break>
uhid0 on uhub3
uhid0: <LOGITECH G110 G-keys, class 0/0, rev 2.00/1.01, addr 2> on usbus0
device_attach: uhid0 attach returned 12
uhid0 on uhub3
uhid0: <vendor 0x046d Gaming Keyboard G110, class 0/0, rev 2.00/1.00, addr 3> on usbus0
uhid1 on uhub3
uhid1: <LOGITECH G110 G-keys, class 0/0, rev 2.00/1.01, addr 2> on usbus0
device_attach: uhid1 attach returned 12
ums0 on uhub6
ums0: <vendor 0x0557 product 0x2419, class 0/0, rev 1.10/1.00, addr 5> on usbus0
ums0: 3 buttons and [Z] coordinates ID=0