Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2020-08-08 05:59:43
From: zzhang
Description: FreeBSD/amd64 on To Be Filled By O.E.M. To Be Filled By O.E.M.
---<<BOOT>>--- Copyright (c) 1992-2019 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 12.1-RELEASE-p8 GENERIC amd64 FreeBSD clang version 8.0.1 (tags/RELEASE_801/final 366581) (based on LLVM 8.0.1) VT(efifb): resolution 1024x768 module_register: cannot register pci/em from kernel; already loaded from if_igb.ko Module pci/em failed to register: 17 module_register: cannot register pci/igb from kernel; already loaded from if_igb.ko Module pci/igb failed to register: 17 CPU: Intel(R) Xeon(R) CPU E3-1230L v3 @ 1.80GHz (1796.04-MHz K8-class CPU) Origin="GenuineIntel" Id=0x306c3 Family=0x6 Model=0x3c Stepping=3 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> AMD Features2=0x21<LAHF,ABM> Structured Extended Features=0x27ab<FSGSBASE,TSCADJ,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG> Structured Extended Features3=0xc000000<IBPB,STIBP> XSAVE Features=0x1<XSAVEOPT> VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID TSC: P-state invariant, performance statistics real memory = 17179869184 (16384 MB) avail memory = 16579952640 (15811 MB) Event timer "LAPIC" quality 600 ACPI APIC Table: <ALASKA A M I> FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 hardware threads random: unblocking device. ioapic0 <Version 2.0> irqs 0-23 on motherboard Launching APs: 1 6 4 2 3 5 7 Timecounter "TSC" frequency 1796036892 Hz quality 1000 random: entropy device external interface 000.000017 [4335] netmap_init netmap: loaded module [ath_hal] loaded module_register_init: MOD_LOAD (vesa, 0xffffffff8112e0f0, 0) error 19 random: registering fast source Intel Secure Key RNG random: fast provider: "Intel Secure Key RNG" kbd1 at kbdmux0 nexus0 efirtc0: <EFI Realtime Clock> on motherboard efirtc0: registered as a time-of-day clock, resolution 1.000000s cryptosoft0: <software crypto> on motherboard acpi0: <ALASKA A M I> on motherboard acpi0: Power Button (fixed) cpu0: <ACPI CPU> on acpi0 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 Event timer "HPET" frequency 14318180 Hz quality 550 atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 atrtc0: registered as a time-of-day clock, resolution 1.000000s Event timer "RTC" frequency 32768 Hz quality 0 attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 xhci0: <Intel Lynx Point USB 3.0 controller> mem 0xf7300000-0xf730ffff irq 16 at device 20.0 on pci0 xhci0: 32 bytes context size, 64-bit DMA xhci0: Port routing mask set to 0xffffffff usbus0 on xhci0 usbus0: 5.0Gbps Super Speed USB v3.0 pci0: <simple comms> at device 22.0 (no driver attached) pci0: <simple comms> at device 22.1 (no driver attached) ehci0: <Intel Lynx Point USB 2.0 controller USB-B> mem 0xf7313000-0xf73133ff irq 16 at device 26.0 on pci0 usbus1: EHCI version 1.0 usbus1 on ehci0 usbus1: 480Mbps High Speed USB v2.0 pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 pci1: <ACPI PCI bus> on pcib1 pcib2: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 pci2: <ACPI PCI bus> on pcib2 igb0: <Intel(R) PRO/1000 PCI-Express Network Driver> port 0xe000-0xe01f mem 0xf7200000-0xf727ffff,0xf7280000-0xf7283fff irq 18 at device 0.0 on pci2 igb0: Using 1024 TX descriptors and 1024 RX descriptors igb0: Using 4 RX queues 4 TX queues igb0: Using MSI-X interrupts with 5 vectors igb0: Ethernet address: [_MAC_XXXXXXXXXX] igb0: netmap queues/slots: TX 4/1024, RX 4/1024 pcib3: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 pci3: <ACPI PCI bus> on pcib3 igb1: <Intel(R) PRO/1000 PCI-Express Network Driver> port 0xd000-0xd01f mem 0xf7100000-0xf717ffff,0xf7180000-0xf7183fff irq 19 at device 0.0 on pci3 igb1: Using 1024 TX descriptors and 1024 RX descriptors igb1: Using 4 RX queues 4 TX queues igb1: Using MSI-X interrupts with 5 vectors igb1: Ethernet address: [_MAC_XXXXXXXXXX] igb1: netmap queues/slots: TX 4/1024, RX 4/1024 pcib4: <ACPI PCI-PCI bridge> irq 19 at device 28.7 on pci0 pci4: <ACPI PCI bus> on pcib4 pcib5: <ACPI PCI-PCI bridge> irq 19 at device 0.0 on pci4 pci5: <ACPI PCI bus> on pcib5 vgapci0: <VGA-compatible display> port 0xc000-0xc07f mem 0xf6000000-0xf6ffffff,0xf7000000-0xf701ffff irq 19 at device 0.0 on pci5 vgapci0: Boot video device ehci1: <Intel Lynx Point USB 2.0 controller USB-A> mem 0xf7312000-0xf73123ff irq 22 at device 29.0 on pci0 usbus2: EHCI version 1.0 usbus2 on ehci1 usbus2: 480Mbps High Speed USB v2.0 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 ahci0: <Intel Lynx Point AHCI SATA controller> port 0xf070-0xf077,0xf060-0xf063,0xf050-0xf057,0xf040-0xf043,0xf020-0xf03f mem 0xf7311000-0xf73117ff irq 19 at device 31.2 on pci0 ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported ahcich0: <AHCI channel> at channel 0 on ahci0 ahcich1: <AHCI channel> at channel 1 on ahci0 ahcich2: <AHCI channel> at channel 2 on ahci0 ahcich3: <AHCI channel> at channel 3 on ahci0 ahcich4: <AHCI channel> at channel 4 on ahci0 ahcich5: <AHCI channel> at channel 5 on ahci0 ahciem0: <AHCI enclosure management bridge> at channel 2147483647 on ahci0 device_attach: ahciem0 attach returned 6 acpi_button0: <Power Button> on acpi0 acpi_button1: <Sleep Button> on acpi0 acpi_tz0: <Thermal Zone> on acpi0 acpi_tz1: <Thermal Zone> on acpi0 uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 uart0: console (115200,n,8,1) uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 ipmi0: <IPMI System Interface> port 0xca2,0xca3 on acpi0 ipmi0: KCS mode found at io 0xca2 on acpi orm0: <ISA Option ROM> at iomem 0xc0000-0xc7fff pnpid ORM0000 on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 12. coretemp0: <CPU On-Die Thermal Sensors> on cpu0 est0: <Enhanced SpeedStep Frequency Control> on cpu0 ZFS filesystem version: 5 ZFS storage pool version: features support (5000) Timecounters tick every 1.000 msec ipmi0: IPMI device rev. 1, firmware rev. 0.28, version 2.0, device support mask 0xbf ipmi0: Number of channels 2 ipmi0: Attached watchdog ipmi0: Establishing power cycle handler ugen1.1: <Intel EHCI root HUB> at usbus1 ugen0.1: <0x8086 XHCI root HUB> at usbus0 ugen2.1: <Intel EHCI root HUB> at usbus2 uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 uhub1: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 ada0: <ST4000VN008-2DR166 CN02> ACS-2 ATA SATA 3.x device ada0: [_SERIAL_NUMBER_XXXXX] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) ada0: Command Queueing enabled ada0: 3815447MB (7814037168 512 byte sectors) ada1 at ahcich1 bus 0 scbus1 target 0 lun 0 ada1: <ST4000NM000A-2HZ100 TN01> ACS-4 ATA SATA 3.x device ada1: [_SERIAL_NUMBER_XXXXX] ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) ada1: Command Queueing enabled ada1: 3815447MB (7814037168 512 byte sectors) ada2 at ahcich2 bus 0 scbus2 target 0 lun 0 ada2: <ST4000VN008-2DR166 CN02> ACS-2 ATA SATA 3.x device ada2: [_SERIAL_NUMBER_XXXXX] ada2: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) ada2: Command Queueing enabled ada2: 3815447MB (7814037168 512 byte sectors) ada3 at ahcich3 bus 0 scbus3 target 0 lun 0 ada3: <WDC WD40EFRX-68N32N0 82.00A82> ACS-3 ATA SATA 3.x device ada3: [_SERIAL_NUMBER_XXXXXXXXXXXX] ada3: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) ada3: Command Queueing enabled ada3: 3815447MB (7814037168 512 byte sectors) ada3: quirks=0x1<4K> ada4 at ahcich4 bus 0 scbus4 target 0 lun 0 ada4: <ST1000LM035-1RK172 ACM1> ACS-3 ATA SATA 3.x device ada4: [_SERIAL_NUMBER_XXXXX] ada4: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) ada4: Command Queueing enabled ada4: 953869MB (1953525168 512 byte sectors) Trying to mount root from zfs:zroot []... Root mount waiting for: usbus2 usbus1 usbus0 uhub0: 2 ports with 2 removable, self powered uhub2: 2 ports with 2 removable, self powered uhub1: 21 ports with 21 removable, self powered ugen0.2: <American Megatrends Inc. Virtual Hub> at usbus0 uhub3 on uhub1 uhub3: <7-port Hub> on usbus0 ugen1.2: <vendor 0x8087 product 0x8008> at usbus1 uhub4 on uhub0 uhub4: <vendor 0x8087 product 0x8008, class 9/0, rev 2.00/0.05, addr 2> on usbus1 ugen2.2: <vendor 0x8087 product 0x8000> at usbus2 uhub5 on uhub2 uhub5: <vendor 0x8087 product 0x8000, class 9/0, rev 2.00/0.05, addr 2> on usbus2 Root mount waiting for: usbus2 usbus1 usbus0 uhub4: 6 ports with 6 removable, self powered uhub5: 8 ports with 8 removable, self powered uhub3: 5 ports with 5 removable, self powered Root mount waiting for: usbus0 Root mount waiting for: usbus0 ugen0.3: <American Megatrends Inc. Virtual Cdrom Device> at usbus0 umass0 on uhub3 umass0: <Virtual Cdrom> on usbus0 umass0: SCSI over Bulk-Only; quirks = 0x0100 umass0:6:0: Attached to scbus6 cd0 at umass-sim0 bus 0 scbus6 target 0 lun 0 cd0: <AMI Virtual CDROM0 1.00> Removable CD-ROM SCSI device cd0: [_SERIAL_NUMBER_XXXXXXXXXX] cd0: 40.000MB/s transfers cd0: Attempt to query device size failed: NOT READY, Medium not present cd0: quirks=0x10<10_BYTE_ONLY> Root mount waiting for: usbus0 ugen0.4: <American Megatrends Inc. Virtual Floppy Device> at usbus0 umass1 on uhub3 umass1: <Virtual Floppy> on usbus0 umass1: SCSI over Bulk-Only; quirks = 0x0100 umass1:7:1: Attached to scbus7 da0 at umass-sim1 bus 1 scbus7 target 0 lun 0 da0: <AMI Virtual Floppy0 1.00> Removable Direct Access SCSI device da0: [_SERIAL_NUMBER_XXXXXXXXXX] da0: 40.000MB/s transfers da0: Attempt to query device size failed: NOT READY, Medium not present da0: quirks=0x2<NO_6_BYTE> Root mount waiting for: usbus0 ugen0.5: <American Megatrends Inc. Virtual HardDisk Device> at usbus0 umass2 on uhub3 umass2: <Virtual HardDisk> on usbus0 umass2: SCSI over Bulk-Only; quirks = 0x0100 umass2:8:2: Attached to scbus8 da1 at umass-sim2 bus 2 scbus8 target 0 lun 0 da1: <AMI Virtual HDISK0 1.00> Removable Direct Access SCSI device da1: [_SERIAL_NUMBER_XXXXXXXXXX] da1: 40.000MB/s transfers da1: Attempt to query device size failed: NOT READY, Medium not present da1: quirks=0x2<NO_6_BYTE> ugen0.6: <American Megatrends Inc. Virtual Keyboard and Mouse> at usbus0 ukbd0 on uhub3 ukbd0: <Keyboard Interface> on usbus0 kbd2 at ukbd0 bridge0: Ethernet address: [_MAC_XXXXXXXXXX] lo0: link state changed to UP bridge0: link state changed to UP igb0: promiscuous mode enabled igb1: promiscuous mode enabled lagg0: promiscuous mode enabled ums0 on uhub3 ums0: <Mouse Interface> on usbus0 ums0: 3 buttons and [Z] coordinates ID=0 igb0: link state changed to UP igb1: link state changed to UP lagg0: link state changed to UP tap9993: Ethernet address: [_MAC_XXXXXXXXXX] tap9993: changing name to 'ztauu5vigr2a7b3' ztauu5vigr2a7b3: link state changed to UP