Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.


Date: 2020-08-10 01:35:50
From: psisci
Description: FreeBSD/amd64 on PC Engines apu4
---<<BOOT>>---
Copyright (c) 1992-2019 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 12.1-RELEASE-p1 APU_HIVE amd64
FreeBSD clang version 8.0.1 (tags/RELEASE_801/final 366581) (based on LLVM 8.0.1)
VT(vga): resolution 640x480
CPU: AMD GX-412TC SOC                                (998.15-MHz K8-class CPU)
  Origin="AuthenticAMD"  Id=0x730f01  Family=0x16  Model=0x30  Stepping=1
  Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
  Features2=0x3ed8220b<SSE3,PCLMULQDQ,MON,SSSE3,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C>
  AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM>
  AMD Features2=0x1d4037ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT,Topology,PNXC,DBE,PTSC,PL2I>
  Structured Extended Features=0x8<BMI1>
  XSAVE Features=0x1<XSAVEOPT>
  SVM: NP,NRIP,AFlush,DAssist,NAsids=8
  TSC: P-state invariant, performance statistics
real memory  = 4815060992 (4592 MB)
avail memory = 4104646656 (3914 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <CORE   COREBOOT>
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s)
random: unblocking device.
ioapic1: Changing APIC ID to 5
ioapic0 <Version 2.1> irqs 0-23 on motherboard
ioapic1 <Version 2.1> irqs 24-55 on motherboard
Launching APs: 3 1 2
Timecounter "TSC" frequency 998149347 Hz quality 1000
random: entropy device external interface
module_register_init: MOD_LOAD (vesa, 0xffffffff809cc2a0, 0) error 19
kbd0 at kbdmux0
000.000039 [4335] netmap_init               netmap: loaded module
nexus0
vtvga0: <VT VGA driver> on motherboard
smbios0: <System Management BIOS> at iomem 0xf3ad0-0xf3aee on motherboard
smbios0: Version: 2.7
aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> on motherboard
cryptosoft0: <software crypto> on motherboard
acpi0: <CORE COREBOOT> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x818-0x81b on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 2.1 on pci0
pcib1: failed to allocate initial I/O port window: 0x1000-0x1fff
pci1: <ACPI PCI bus> on pcib1
igb0: <Intel(R) PRO/1000 PCI-Express Network Driver> mem 0xfe500000-0xfe51ffff,0xfe520000-0xfe523fff at device 0.0 on pci1
igb0: Using 1024 TX descriptors and 1024 RX descriptors
igb0: Using 2 RX queues 2 TX queues
igb0: Using MSI-X interrupts with 3 vectors
igb0: Ethernet address: [_MAC_XXXXXXXXXX]
igb0: netmap queues/slots: TX 2/1024, RX 2/1024
pcib2: <ACPI PCI-PCI bridge> at device 2.2 on pci0
pci2: <ACPI PCI bus> on pcib2
igb1: <Intel(R) PRO/1000 PCI-Express Network Driver> port 0x2000-0x201f mem 0xfe600000-0xfe61ffff,0xfe620000-0xfe623fff at device 0.0 on pci2
igb1: Using 1024 TX descriptors and 1024 RX descriptors
igb1: Using 2 RX queues 2 TX queues
igb1: Using MSI-X interrupts with 3 vectors
igb1: Ethernet address: [_MAC_XXXXXXXXXX]
igb1: netmap queues/slots: TX 2/1024, RX 2/1024
pcib3: <ACPI PCI-PCI bridge> at device 2.3 on pci0
pci3: <ACPI PCI bus> on pcib3
igb2: <Intel(R) PRO/1000 PCI-Express Network Driver> port 0x3000-0x301f mem 0xfe700000-0xfe71ffff,0xfe720000-0xfe723fff at device 0.0 on pci3
igb2: Using 1024 TX descriptors and 1024 RX descriptors
igb2: Using 2 RX queues 2 TX queues
igb2: Using MSI-X interrupts with 3 vectors
igb2: Ethernet address: [_MAC_XXXXXXXXXX]
igb2: netmap queues/slots: TX 2/1024, RX 2/1024
pcib4: <ACPI PCI-PCI bridge> at device 2.4 on pci0
pci4: <ACPI PCI bus> on pcib4
igb3: <Intel(R) PRO/1000 PCI-Express Network Driver> port 0x4000-0x401f mem 0xfe800000-0xfe81ffff,0xfe820000-0xfe823fff at device 0.0 on pci4
igb3: Using 1024 TX descriptors and 1024 RX descriptors
igb3: Using 2 RX queues 2 TX queues
igb3: Using MSI-X interrupts with 3 vectors
igb3: Ethernet address: [_MAC_XXXXXXXXXX]
igb3: netmap queues/slots: TX 2/1024, RX 2/1024
pci0: <encrypt/decrypt> at device 8.0 (no driver attached)
xhci0: <AMD FCH USB 3.0 controller> mem 0xfeb22000-0xfeb23fff at device 16.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
xhci0: Unable to map MSI-X table 
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
ahci0: <AMD Hudson-2 AHCI SATA controller> port 0x5010-0x5017,0x5020-0x5023,0x5018-0x501f,0x5024-0x5027,0x5000-0x500f mem 0xfeb25000-0xfeb253ff at device 17.0 on pci0
ahci0: AHCI v1.30 with 2 6Gbps ports, Port Multiplier supported with FBS
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ehci0: <AMD FCH USB 2.0 controller> mem 0xfeb25400-0xfeb254ff at device 18.0 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci0
usbus1: 480Mbps High Speed USB v2.0
ehci1: <AMD FCH USB 2.0 controller> mem 0xfeb25500-0xfeb255ff at device 19.0 on pci0
usbus2: EHCI version 1.0
usbus2 on ehci1
usbus2: 480Mbps High Speed USB v2.0
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
sdhci_pci0: <Generic SD HCI> mem 0xfeb25600-0xfeb256ff at device 20.7 on pci0
sdhci_pci0: 1 slot(s) allocated
amdtemp0: <AMD CPU On-Die Thermal Sensors> on hostb5
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: console (115200,n,8,1)
orm0: <ISA Option ROM> at iomem 0xef000-0xeffff pnpid ORM0000 on isa0
amdsbwd0: <AMD FCH Rev 41h+ Watchdog Timer> at iomem 0xfed80b00-0xfed80b03,0xfed80b04-0xfed80b07 on isa0
uart1: <16550 or compatible> at port 0x2f8 irq 3 on isa0
hwpstate0: <Cool`n'Quiet 2.0> on cpu0
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
ugen0.1: <0x1022 XHCI root HUB> at usbus0
ugen2.1: <AMD EHCI root HUB> at usbus2
ugen1.1: <AMD EHCI root HUB> at usbus1
uhub0: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
uhub1: <AMD EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
uhub2: <AMD EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
uhub0: 4 ports with 4 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
ugen1.2: <vendor 0x0438 product 0x7900> at usbus1
uhub3 on uhub2
uhub3: <vendor 0x0438 product 0x7900, class 9/0, rev 2.00/0.18, addr 2> on usbus1
ugen2.2: <vendor 0x0438 product 0x7900> at usbus2
uhub4 on uhub1
uhub4: <vendor 0x0438 product 0x7900, class 9/0, rev 2.00/0.18, addr 2> on usbus2
uhub4: 4 ports with 4 removable, self powered
uhub3: 4 ports with 4 removable, self powered
ugen0.2: <Seagate BUP SL> at usbus0
umass0 on uhub0
umass0: <Seagate BUP SL, class 0/0, rev 3.00/1.09, addr 1> on usbus0
umass0:  SCSI over Bulk-Only; quirks = 0x8100
umass0:2:0: Attached to scbus2
run_interrupt_driven_hooks: still waiting after 60 seconds for xpt_config
(probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 
(probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error
(probe0:umass-sim0:0:0:0): Retrying command, 3 more tries remain
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <Samsung SSD 860 EVO mSATA 1TB RVT42B6Q> ACS-4 ATA SATA 3.x device
ada0: [_SERIAL_NUMBER_XXXXXXXXXXXX]
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes)
ada0: Command Queueing enabled
ada0: 953869MB (1953525168 512 byte sectors)
da0 at umass-sim0 bus 0 scbus2 target 0 lun 0
da0: <Seagate BUP SL 0109> Fixed Direct Access SPC-4 SCSI device
da0: [_SERIAL_NUMBER_XXXXX]
da0: 400.000MB/s transfers
da0: 4769307MB (9767541167 512 byte sectors)
da0: quirks=0x2<NO_6_BYTE>
Trying to mount root from zfs:zroot/ROOT/default []...
TCP Hpts created 4 swi interrupt thread and bound 0
warning: total configured swap (4194304 pages) exceeds maximum recommended amount (4025664 pages).
warning: increase kern.maxswzone or reduce amount of swap.
lo0: link state changed to UP
vlan0: changing name to 'v_download'
vlan1: changing name to 'v_hxh'
vlan2: changing name to 'camera'
vlan3: changing name to 'lan'
igb0: link state changed to UP
igb1: link state changed to UP
v_download: link state changed to UP
v_hxh: link state changed to UP
igb2: link state changed to UP
lan: link state changed to UP
camera: link state changed to UP
intsmb0: <AMD FCH SMBus Controller> at device 20.0 on pci0
smbus0: <System Management Bus> on intsmb0
smb0: <SMBus generic I/O> on smbus0