Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2020-09-12 05:38:26
From: lider99
Description: orange pi pc
dmesg ---<<BOOT>>--- Copyright (c) 1992-2019 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 12.1-RELEASE r354233 GENERIC arm FreeBSD clang version 8.0.1 (tags/RELEASE_801/final 366581) (based on LLVM 8.0.1) VT: init without driver. module_register: cannot register ofwbus/pcib from kernel; already loaded from kernel Module ofwbus/pcib failed to register: 17 module_register: cannot register simplebus/pcib from kernel; already loaded from kernel Module simplebus/pcib failed to register: 17 CPU: ARM Cortex-A7 r0p5 (ECO: 0x00000000) CPU Features: Multiprocessing, Thumb2, Security, Virtualization, Generic Timer, VMSAv7, PXN, LPAE, Coherent Walk Optional instructions: SDIV/UDIV, UMULL, SMULL, SIMD(ext) LoUU:2 LoC:3 LoUIS:2 Cache level 1: 32KB/64B 4-way data cache WB Read-Alloc Write-Alloc 32KB/32B 2-way instruction cache Read-Alloc Cache level 2: 512KB/64B 8-way unified cache WB Read-Alloc Write-Alloc real memory = 1040113664 (991 MB) avail memory = 1002848256 (956 MB) No PSCI/SMCCC call function found FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs arc4random: no preloaded entropy cache random: entropy device external interface kbd0 at kbdmux0 ofwbus0: <Open Firmware Device Tree> ofw_clkbus0: <OFW clocks bus> on ofwbus0 clk_fixed0: <Fixed clock> on ofw_clkbus0 clk_fixed1: <Fixed clock> on ofw_clkbus0 simplebus0: <Flattened device tree simple bus> on ofwbus0 rtc0: <Allwinner RTC> mem 0x1f00000-0x1f003ff irq 40,41 on simplebus0 rtc0: registered as a time-of-day clock, resolution 1.000000s regfix0: <Fixed Regulator> on ofwbus0 regfix1: <Fixed Regulator> on ofwbus0 regfix2: <Fixed Regulator> on ofwbus0 regfix3: <Fixed Regulator> on ofwbus0 ccu_h3ng0: <Allwinner H3/H5 Clock Control Unit NG> mem 0x1c20000-0x1c203ff on simplebus0 ccu_sun8i_r0: <Allwinner SUN8I_R Clock Control Unit NG> mem 0x1f01400-0x1f014ff on simplebus0 gic0: <ARM Generic Interrupt Controller> mem 0x1c81000-0x1c81fff,0x1c82000-0x1c83fff,0x1c84000-0x1c85fff,0x1c86000-0x1c87fff irq 37 on simplebus0 gic0: pn 0x1, arch 0x2, rev 0x1, implementer 0x43b irqs 160 gpio0: <Allwinner GPIO/Pinmux controller> mem 0x1c20800-0x1c20bff irq 18,19 on simplebus0 gpiobus0: <OFW GPIO bus> on gpio0 iichb0: <Allwinner Integrated I2C Bus Controller> mem 0x1f02400-0x1f027ff irq 43 on simplebus0 iicbus0: <OFW I2C bus> on iichb0 sy8106a0: <Silergy SY8106A regulator> at addr 0xca on iicbus0 gpio1: <Allwinner GPIO/Pinmux controller> mem 0x1f02c00-0x1f02fff irq 44 on simplebus0 gpiobus1: <OFW GPIO bus> on gpio1 generic_timer0: <ARMv7 Generic Timer> irq 0,1,2,3 on ofwbus0 Timecounter "ARM MPCore Timecounter" frequency 24000000 Hz quality 1000 Event timer "ARM MPCore Eventtimer" frequency 24000000 Hz quality 1000 awusbphy0: <Allwinner USB PHY> mem 0x1c19400-0x1c1942b,0x1c1a800-0x1c1a803,0x1c1b800-0x1c1b803,0x1c1c800-0x1c1c803,0x1c1d800-0x1c1d803 on simplebus0 aw_syscon0: <Allwinner syscon> mem 0x1c00000-0x1c00fff on simplebus0 a31dmac0: <Allwinner DMA controller> mem 0x1c02000-0x1c02fff irq 4 on simplebus0 aw_mmc0: <Allwinner Integrated MMC/SD controller> mem 0x1c0f000-0x1c0ffff irq 6 on simplebus0 mmc0: <MMC/SD bus> on aw_mmc0 ehci0: <Allwinner Integrated USB 2.0 controller> mem 0x1c1a000-0x1c1a0ff irq 10 on simplebus0 usbus0: EHCI version 1.0 usbus0 on ehci0 ohci0: <Generic OHCI Controller> mem 0x1c1a400-0x1c1a4ff irq 11 on simplebus0 usbus1 on ohci0 ehci1: <Allwinner Integrated USB 2.0 controller> mem 0x1c1b000-0x1c1b0ff irq 12 on simplebus0 usbus2: EHCI version 1.0 usbus2 on ehci1 ohci1: <Generic OHCI Controller> mem 0x1c1b400-0x1c1b4ff irq 13 on simplebus0 usbus3 on ohci1 ehci2: <Allwinner Integrated USB 2.0 controller> mem 0x1c1c000-0x1c1c0ff irq 14 on simplebus0 usbus4: EHCI version 1.0 usbus4 on ehci2 ohci2: <Generic OHCI Controller> mem 0x1c1c400-0x1c1c4ff irq 15 on simplebus0 usbus5 on ohci2 ehci3: <Allwinner Integrated USB 2.0 controller> mem 0x1c1d000-0x1c1d0ff irq 16 on simplebus0 usbus6: EHCI version 1.0 usbus6 on ehci3 ohci3: <Generic OHCI Controller> mem 0x1c1d400-0x1c1d4ff irq 17 on simplebus0 usbus7 on ohci3 gpioc0: <GPIO controller> on gpio0 awg0: <Allwinner Gigabit Ethernet> mem 0x1c30000-0x1c3ffff irq 22 on simplebus0 miibus0: <MII bus> on awg0 ukphy0: <Generic IEEE 802.3u media interface> PHY 0 on miibus0 ukphy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow ukphy1: <Generic IEEE 802.3u media interface> PHY 1 on miibus0 ukphy1: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow awg0: Ethernet address: [_MAC_XXXXXXXXXX] aw_wdog0: <Allwinner A31 Watchdog> mem 0x1c20ca0-0x1c20cbf irq 25 on simplebus0 pcm0: <Allwinner Audio Codec> mem 0x1c22c00-0x1c22fff irq 29 on simplebus0 uart0: <16750 or compatible> mem 0x1c28000-0x1c283ff irq 30 on simplebus0 uart0: console (115384,n,8,1) aw_ir0: <Allwinner CIR controller> mem 0x1f02000-0x1f023ff irq 42 on simplebus0 iic0: <I2C generic I/O> on iicbus0 gpioc1: <GPIO controller> on gpio1 cpulist0: <Open Firmware CPU Group> on ofwbus0 cpu0: <Open Firmware CPU> on cpulist0 cpufreq_dt0: <Generic cpufreq driver> on cpu0 cpu1: <Open Firmware CPU> on cpulist0 cpu2: <Open Firmware CPU> on cpulist0 cpu3: <Open Firmware CPU> on cpulist0 gpioled0: <GPIO LEDs> on ofwbus0 cryptosoft0: <software crypto> Timecounters tick every 1.000 msec usbus0: 480Mbps High Speed USB v2.0 usbus1: 12Mbps Full Speed USB v1.0 usbus2: 480Mbps High Speed USB v2.0 usbus3: 12Mbps Full Speed USB v1.0 usbus4: 480Mbps High Speed USB v2.0 ugen0.1: <Allwinner EHCI root HUB> at usbus0 uhub0: <Allwinner EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 ugen1.1: <Generic OHCI root HUB> at usbus1 uhub1: <Generic OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 ugen2.1: <Allwinner EHCI root HUB> at usbus2 uhub2: <Allwinner EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 ugen3.1: <Generic OHCI root HUB> at usbus3 uhub3: <Generic OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3 ugen4.1: <Allwinner EHCI root HUB> at usbus4 uhub4: <Allwinner EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4 usbus5: 12Mbps Full Speed USB v1.0 usbus6: 480Mbps High Speed USB v2.0 usbus7: 12Mbps Full Speed USB v1.0 ugen5.1: <Generic OHCI root HUB> at usbus5 uhub5: <Generic OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5 ugen6.1: <Allwinner EHCI root HUB> at usbus6 uhub6: <Allwinner EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus6 ugen7.1: <Generic OHCI root HUB> at usbus7 uhub7: <Generic OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus7 mmcsd0: 64GB <SDHC 00000 1.0 SN 5AA05D30 MFG 07/2016 by 27 SM> at mmc0 50.0MHz/4bit/32768-block Release APs arc4random: no preloaded entropy cache mmc0: Trying to mount root from ufs:/dev/ufs/rootfs [rw]... Failed to set VCCQ for card at relative address 1 uhub1: 1 port with 1 removable, self powered uhub3: 1 port with 1 removable, self powered uhub5: 1 port with 1 removable, self powered uhub7: 1 port with 1 removable, self powered arc4random: no preloaded entropy cache arc4random: no preloaded entropy cache uhub0: 1 port with 1 removable, self powered uhub2: 1 port with 1 removable, self powered uhub4: 1 port with 1 removable, self powered uhub6: 1 port with 1 removable, self powered GEOM_PART: mmcsd0s2 was automatically resized. Use `gpart commit mmcsd0s2` to save changes or `gpart undo mmcsd0s2` to revert them. ugen6.2: <JMicron USB to ATA/ATAPI Bridge> at usbus6 umass0 on uhub6 umass0: <MSC Bulk-Only Transfer> on usbus6 da0 at umass-sim0 bus 0 scbus0 target 0 lun 0 da0: <CHN 25PA TA01M 128 0803> Fixed Direct Access SCSI-2 device da0: [_SERIAL_NUMBER_XXXXXXXXX] da0: 40.000MB/s transfers da0: 120832MB (247463936 512 byte sectors) da0: quirks=0x2<NO_6_BYTE> ugen3.2: <vendor 0x0a12 CSR8510 A10> at usbus3 random: unblocking device. lo0: link state changed to UP awg0: link state changed to DOWN awg0: link state changed to UP warning: KLD '/boot/kernel/netgraph.ko' is newer than the linker.hints file warning: KLD '/boot/kernel/ng_hci.ko' is newer than the linker.hints file warning: KLD '/boot/kernel/ng_bluetooth.ko' is newer than the linker.hints file ubt0 on uhub3 ubt0: <vendor 0x0a12 CSR8510 A10, class 224/1, rev 2.00/88.91, addr 2> on usbus3 warning: KLD '/boot/kernel/ng_l2cap.ko' is newer than the linker.hints file warning: KLD '/boot/kernel/ng_btsocket.ko' is newer than the linker.hints file WARNING: attempt to domain_add(bluetooth) after domainfinalize() WARNING: attempt to domain_add(netgraph) after domainfinalize() freebsd@generic:~ %