Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2020-09-15 02:30:10
From: nataraj
Description: FreeBSD/amd64 on Acer Aspire ES1-131
---<<BOOT>>--- Copyright (c) 1992-2019 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 12.1-RELEASE r354233 GENERIC amd64 FreeBSD clang version 8.0.1 (tags/RELEASE_801/final 366581) (based on LLVM 8.0.1) VT(efifb): resolution 1366x768 sysctl_warn_reuse: can't re-use a leaf (debug.mddebug)! sysctl_warn_reuse: can't re-use a leaf (vm.md_malloc_wait)! module_register: cannot register g_md from kernel; already loaded from geom_md.ko Module g_md failed to register: 17 CPU: Intel(R) Celeron(R) CPU N3150 @ 1.60GHz (1600.05-MHz K8-class CPU) Origin="GenuineIntel" Id=0x406c3 Family=0x6 Model=0x4c Stepping=3 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x43d8e3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,AESNI,RDRAND> AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> AMD Features2=0x101<LAHF,Prefetch> Structured Extended Features=0x2282<TSCADJ,SMEP,ERMS,NFPUSG> VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID TSC: P-state invariant, performance statistics real memory = 2147483648 (2048 MB) avail memory = 1953984512 (1863 MB) Event timer "LAPIC" quality 600 ACPI APIC Table: <ACRSYS ACRPRDCT> WARNING: L1 data cache covers fewer APIC IDs than a core (0 < 1) FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs FreeBSD/SMP: 1 package(s) x 4 core(s) random: unblocking device. ioapic0 <Version 2.0> irqs 0-114 on motherboard Launching APs: 2 1 3 Timecounter "TSC" frequency 1600051960 Hz quality 1000 random: entropy device external interface The GEOM class MD is already loaded. kbd1 at kbdmux0 000.000023 [4335] netmap_init netmap: loaded module [ath_hal] loaded module_register_init: MOD_LOAD (vesa, 0xffffffff8112e050, 0) error 19 random: registering fast source Intel Secure Key RNG random: fast provider: "Intel Secure Key RNG" nexus0 efirtc0: <EFI Realtime Clock> on motherboard efirtc0: registered as a time-of-day clock, resolution 1.000000s cryptosoft0: <software crypto> on motherboard aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> on motherboard acpi0: <ACRSYS ACRPRDCT> on motherboard acpi0: Power Button (fixed) unknown: I/O range not supported cpu0: <ACPI CPU> on acpi0 attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0 atrtc0: Warning: Couldn't map I/O. atrtc0: registered as a time-of-day clock, resolution 1.000000s Event timer "RTC" frequency 32768 Hz quality 0 Timecounter "ACPI-safe" frequency 3579545 Hz quality 850 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 acpi_ec0: <Embedded Controller: GPE 0x18> port 0x62,0x66 on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 vgapci0: <VGA-compatible display> port 0x2000-0x203f mem 0x90000000-0x90ffffff,0x80000000-0x8fffffff at device 2.0 on pci0 vgapci0: Boot video device ahci0: <AHCI SATA controller> port 0x2060-0x207f mem 0x9141d000-0x9141d7ff at device 19.0 on pci0 ahci0: AHCI v1.31 with 2 6Gbps ports, Port Multiplier not supported ahcich0: <AHCI channel> at channel 0 on ahci0 xhci0: <Intel Braswell USB 3.0 controller> mem 0x91400000-0x9140ffff at device 20.0 on pci0 xhci0: 32 bytes context size, 64-bit DMA usbus0: waiting for BIOS to give up control usbus0 on xhci0 usbus0: 5.0Gbps Super Speed USB v3.0 pci0: <encrypt/decrypt> at device 26.0 (no driver attached) hdac0: <Intel (0x2284) HDA Controller> mem 0x91410000-0x91413fff at device 27.0 on pci0 pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0 pcib1: [GIANT-LOCKED] pcib2: <ACPI PCI-PCI bridge> at device 28.2 on pci0 pci1: <ACPI PCI bus> on pcib2 ath0: <Qualcomm Atheros AR9565> mem 0x91100000-0x9117ffff at device 0.0 on pci1 ath0: Bluetooth Antenna Diversity card detected ar9300_flash_map: unimplemented for now Restoring Cal data from DRAM Restoring Cal data from EEPROM Restoring Cal data from Flash Restoring Cal data from Flash Restoring Cal data from OTP ar9300_hw_attach: ar9300_eeprom_attach returned 0 ath0: [HT] enabling HT modes ath0: [HT] enabling short-GI in 20MHz mode ath0: [HT] 1 stream STBC receive enabled ath0: [HT] 1 RX streams; 1 TX streams ath0: QCA9565 mac 704.2 RF5110 phy 2277.12 ath0: 2GHz radio: 0x0000; 5GHz radio: 0x0000 pcib3: <ACPI PCI-PCI bridge> at device 28.3 on pci0 pci2: <ACPI PCI bus> on pcib3 re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0x1000-0x10ff mem 0x91004000-0x91004fff,0x91000000-0x91003fff at device 0.0 on pci2 re0: Using 1 MSI-X message re0: turning off MSI enable bit. re0: ASPM disabled re0: Chip rev. 0x54000000 re0: MAC rev. 0x00100000 miibus0: <MII bus> on re0 rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0 rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow re0: Using defaults for TSO: 65518/35/2048 re0: Ethernet address: [_MAC_XXXXXXXXXX] re0: netmap queues/slots: TX 1/256, RX 1/256 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 acpi_button0: <Power Button> on acpi0 acpi_button1: <Sleep Button> on acpi0 acpi_acad0: <AC Adapter> on acpi0 battery0: <ACPI Control Method Battery> on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_tz0: <Thermal Zone> on acpi0 sdhci_acpi0: <Intel Bay Trail/Braswell eMMC 4.5/4.5.1 Controller> iomem 0x91421000-0x91421fff irq 45 on acpi0 mmc0: <MMC/SD bus> on sdhci_acpi0 sdhci_acpi1: <Intel Bay Trail/Braswell SDXC Controller> iomem 0x9141f000-0x9141ffff irq 47 on acpi0 mmc1: <MMC/SD bus> on sdhci_acpi1 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] uart0: <16550 or compatible> at port 0x3f8 irq 4 flags 0x10 on isa0 uart0: non-PNP ISA device will be removed from GENERIC in FreeBSD 12. est0: <Enhanced SpeedStep Frequency Control> on cpu0 Timecounters tick every 1.000 msec hdacc0: <Realtek ALC255 HDA CODEC> at cad 0 on hdac0 hdaa0: <Realtek ALC255 Audio Function Group> at nid 1 on hdacc0 pcm0: <Realtek ALC255 (Internal Analog)> at nid 20 and 18 on hdaa0 pcm1: <Realtek ALC255 (Front Analog Headphones)> at nid 33 on hdaa0 hdacc1: <Intel (0x2883) HDA CODEC> at cad 2 on hdac0 hdaa1: <Intel (0x2883) Audio Function Group> at nid 1 on hdacc1 pcm2: <Intel (0x2883) (HDMI/DP 8ch)> at nid 5 on hdaa1 ugen0.1: <0x8086 XHCI root HUB> at usbus0 uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 mmc0: No compatible cards found on bus mmc1: No compatible cards found on bus ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 ada0: <ST500LT012-1DG142 0001SDM1> ATA8-ACS SATA 3.x device ada0: [_SERIAL_NUMBER_XXXXX] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) ada0: Command Queueing enabled ada0: 476940MB (976773168 512 byte sectors) ada0: quirks=0x1<4K> Trying to mount root from ufs:/dev/ada0p6 [rw]... uhub0: 13 ports with 13 removable, self powered ugen0.2: <PixArt USB Optical Mouse> at usbus0 ugen0.3: <Chicony Electronics Co.,Ltd. VGA Webcam> at usbus0 ugen0.4: <vendor 0x04ca product 0x3014> at usbus0 drmn0: <drmn> on vgapci0 vgapci0: child drmn0 requested pci_enable_io vgapci0: child drmn0 requested pci_enable_io [drm] Unable to create a private tmpfs mount, hugepage support will be disabled(-19). Successfully added WC MTRR for [0x80000000-0x8fffffff]: 0; [drm] Got stolen memory base 0x7ce00000, size 0x2000000 [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [drm] Driver supports precise vblank timestamp query. [drm] Connector DP-1: get mode from tunables: [drm] - kern.vt.fb.modes.DP-1 [drm] - kern.vt.fb.default_mode [drm] Connector HDMI-A-1: get mode from tunables: [drm] - kern.vt.fb.modes.HDMI-A-1 [drm] - kern.vt.fb.default_mode [drm] Connector eDP-1: get mode from tunables: [drm] - kern.vt.fb.modes.eDP-1 [drm] - kern.vt.fb.default_mode [drm] Connector DP-2: get mode from tunables: [drm] - kern.vt.fb.modes.DP-2 [drm] - kern.vt.fb.default_mode [drm] Connector HDMI-A-2: get mode from tunables: [drm] - kern.vt.fb.modes.HDMI-A-2 [drm] - kern.vt.fb.default_mode [drm] Initialized i915 1.6.0 20171222 for drmn0 on minor 0 VT: Replacing driver "efifb" with new "fb". start FB_INFO: type=11 height=768 width=1360 depth=32 cmsize=16 size=4227072 pbase=0x80020000 vbase=0xfffff80080020000 name=drmn0 flags=0x0 stride=5504 bpp=32 cmap[0]=0 cmap[1]=7f0000 cmap[2]=7f00 cmap[3]=c4a000 end FB_INFO drmn0: fb0: inteldrmfb frame buffer device drmn0: bcs0 is not idle before parking wlan0: Ethernet address: [_MAC_XXXXXXXXXX] lo0: link state changed to UP re0: link state changed to DOWN ums0 on uhub0 ums0: <PixArt USB Optical Mouse, class 0/0, rev 1.10/1.00, addr 1> on usbus0 ums0: 3 buttons and [XYZ] coordinates ID=0 ubt0 on uhub0 ubt0: <vendor 0x04ca product 0x3014, class 224/1, rev 1.10/0.01, addr 3> on usbus0 WARNING: attempt to domain_add(bluetooth) after domainfinalize() WARNING: attempt to domain_add(netgraph) after domainfinalize()