Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2020-10-07 23:30:45
From: darkain
Description: FreeBSD 13.0-CURRENT on ESXi-Arm Fling
---<<BOOT>>---
KDB: debugger backends: ddb
KDB: current backend: ddb
Copyright (c) 1992-2020 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 13.0-CURRENT #0 e18fc94e525-c253475(main): Thu Oct 1 04:58:28 UTC 2020
[_EMAIL_XXXXXXXXXXXXXXXXXXX]:/usr/obj/usr/src/arm64.aarch64/sys/GENERIC arm64
FreeBSD clang version 11.0.0 ([_EMAIL_XXXXX]:llvm/llvm-project.git llvmorg-11.0.0-rc2-91-g6e042866c30)
WARNING: WITNESS option enabled, expect reduced performance.
VT(efifb): resolution 1024x768
module firmware already present!
real memory = 2144911360 (2045 MB)
avail memory = 2064756736 (1969 MB)
FreeBSD/SMP: Multiprocessor System Detected: 1 CPUs
random: unblocking device.
random: entropy device external interface
MAP f87d0000 mode 2 pages 80
MAP f8820000 mode 2 pages 80
MAP f8870000 mode 2 pages 80
MAP f88c0000 mode 2 pages 80
MAP f8910000 mode 2 pages 80
MAP f8960000 mode 2 pages 80
MAP f89b0000 mode 2 pages 80
MAP f8a00000 mode 2 pages 80
MAP f8a50000 mode 2 pages 80
MAP f8aa0000 mode 2 pages 160
MAP fbe20000 mode 2 pages 144
MAP fbef0000 mode 2 pages 240
MAP 1000000 mode 0 pages 24
MAP 20000000 mode 0 pages 1
WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 13.0.
kbd0 at kbdmux0
WARNING: Device "openfirm" is Giant locked and may be deleted before FreeBSD 13.0.
ofwbus0: <Open Firmware Device Tree>
clk_fixed0: <Fixed clock> on ofwbus0
psci0: <ARM Power State Co-ordination Interface Driver> on ofwbus0
gic0: <ARM Generic Interrupt Controller> mem 0x2c010000-0x2c01ffff,0x2c002000-0x2c003fff irq 0 on ofwbus0
gic0: pn 0x0, arch 0x2, rev 0x0, implementer 0x902 irqs 992
gicv2m0: <ARM Generic Interrupt Controller MSI/MSIX> mem 0-0xfff on gic0
generic_timer0: <ARMv8 Generic Timer> irq 1,2,3,4 on ofwbus0
Timecounter "ARM MPCore Timecounter" frequency 54000000 Hz quality 1000
Event timer "ARM MPCore Eventtimer" frequency 54000000 Hz quality 1000
efirtc0: <EFI Realtime Clock>
efirtc0: registered as a time-of-day clock, resolution 1.000000s
cpulist0: <Open Firmware CPU Group> on ofwbus0
cpu0: <Open Firmware CPU> on cpulist0
pcib0: <Generic PCI host controller> mem 0x40000000-0x4fffffff on ofwbus0
pci0: <PCI bus> on pcib0
vgapci0: <VGA-compatible display> mem 0x3f400000-0x3f7fffff,0x78000000-0x7fffffff at device 15.0 on pci0
vgapci0: Boot video device
pcib1: <PCI-PCI bridge> at device 17.0 on pci0
pci1: <PCI bus> on pcib1
ahci0: <AHCI SATA controller> mem 0x3fb00000-0x3fb00fff at device 1.0 on pci1
ahci0: AHCI v1.30 with 30 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
ahcich6: <AHCI channel> at channel 6 on ahci0
ahcich7: <AHCI channel> at channel 7 on ahci0
ahcich8: <AHCI channel> at channel 8 on ahci0
ahcich9: <AHCI channel> at channel 9 on ahci0
ahcich10: <AHCI channel> at channel 10 on ahci0
ahcich11: <AHCI channel> at channel 11 on ahci0
ahcich12: <AHCI channel> at channel 12 on ahci0
ahcich13: <AHCI channel> at channel 13 on ahci0
ahcich14: <AHCI channel> at channel 14 on ahci0
ahcich15: <AHCI channel> at channel 15 on ahci0
ahcich16: <AHCI channel> at channel 16 on ahci0
ahcich17: <AHCI channel> at channel 17 on ahci0
ahcich18: <AHCI channel> at channel 18 on ahci0
ahcich19: <AHCI channel> at channel 19 on ahci0
ahcich20: <AHCI channel> at channel 20 on ahci0
ahcich21: <AHCI channel> at channel 21 on ahci0
ahcich22: <AHCI channel> at channel 22 on ahci0
ahcich23: <AHCI channel> at channel 23 on ahci0
ahcich24: <AHCI channel> at channel 24 on ahci0
ahcich25: <AHCI channel> at channel 25 on ahci0
ahcich26: <AHCI channel> at channel 26 on ahci0
ahcich27: <AHCI channel> at channel 27 on ahci0
ahcich28: <AHCI channel> at channel 28 on ahci0
ahcich29: <AHCI channel> at channel 29 on ahci0
pcib2: <PCI-PCI bridge> at device 21.0 on pci0
pci2: <PCI bus> on pcib2
pci2: <mass storage, SAS> at device 0.0 (no driver attached)
pcib3: <PCI-PCI bridge> at device 21.1 on pci0
pcib4: <PCI-PCI bridge> at device 21.2 on pci0
pcib5: <PCI-PCI bridge> at device 21.3 on pci0
pcib6: <PCI-PCI bridge> at device 21.4 on pci0
pcib7: <PCI-PCI bridge> at device 21.5 on pci0
pcib8: <PCI-PCI bridge> at device 21.6 on pci0
pcib9: <PCI-PCI bridge> at device 21.7 on pci0
pcib10: <PCI-PCI bridge> at device 22.0 on pci0
pci3: <PCI bus> on pcib10
em0: <Intel(R) PRO/1000 Network Connection> mem 0x3f920000-0x3f93ffff,0x3f900000-0x3f91ffff,0x3f940000-0x3f943fff at device 0.0 on pci3
em0: Using 1024 TX descriptors and 1024 RX descriptors
em0: Using 1 RX queues 1 TX queues
em0: Using MSI-X interrupts with 2 vectors
em0: Ethernet address: [_MAC_XXXXXXXXXX]
pcib11: <PCI-PCI bridge> at device 22.1 on pci0
pcib12: <PCI-PCI bridge> at device 22.2 on pci0
pcib13: <PCI-PCI bridge> at device 22.3 on pci0
pcib14: <PCI-PCI bridge> at device 22.4 on pci0
pcib15: <PCI-PCI bridge> at device 22.5 on pci0
pcib16: <PCI-PCI bridge> at device 22.6 on pci0
pcib17: <PCI-PCI bridge> at device 22.7 on pci0
pcib18: <PCI-PCI bridge> at device 23.0 on pci0
pci4: <PCI bus> on pcib18
xhci0: <XHCI (generic) USB 3.0 controller> mem 0x3f800000-0x3f81ffff at device 0.0 on pci4
xhci0: 32 bytes context size, 64-bit DMA
xhci0: Unable to map MSI-X table
usbus0 on xhci0
pcib19: <PCI-PCI bridge> at device 23.1 on pci0
pcib20: <PCI-PCI bridge> at device 23.2 on pci0
pcib21: <PCI-PCI bridge> at device 23.3 on pci0
pcib22: <PCI-PCI bridge> at device 23.4 on pci0
pcib23: <PCI-PCI bridge> at device 23.5 on pci0
pcib24: <PCI-PCI bridge> at device 23.6 on pci0
pcib25: <PCI-PCI bridge> at device 23.7 on pci0
pcib26: <PCI-PCI bridge> at device 24.0 on pci0
pcib27: <PCI-PCI bridge> at device 24.1 on pci0
pcib28: <PCI-PCI bridge> at device 24.2 on pci0
pcib29: <PCI-PCI bridge> at device 24.3 on pci0
pcib30: <PCI-PCI bridge> at device 24.4 on pci0
pcib31: <PCI-PCI bridge> at device 24.5 on pci0
pcib32: <PCI-PCI bridge> at device 24.6 on pci0
pcib33: <PCI-PCI bridge> at device 24.7 on pci0
uart0: <16550 or compatible> mem 0x3fff03f8-0x3fff03ff irq 5 on ofwbus0
uart0: console (230400,n,8,1)
uart1: <16550 or compatible> mem 0x3fff02f8-0x3fff02ff irq 6 on ofwbus0
cryptosoft0: <software crypto>
Timecounters tick every 1.000 msec
em0: link state changed to UP
debugnet_any_ifnet_update: Bad dn_init result from em0 (ifp 0xffffa00000953800), ignoring.
usbus0: 5.0Gbps Super Speed USB v3.0
CPU 0: ARM Cortex-A72 r0p3 affinity: 0
Cache Type = <64 byte D-cacheline,64 byte I-cacheline,PIPT ICache,64 byte ERG,64 byte CWG>
Instruction Set Attributes 0 = <CRC32>
Instruction Set Attributes 1 = <>
Processor Features 0 = <AdvSIMD,FP,EL3 32,EL2 32,EL1 32,EL0 32>
Processor Features 1 = <>
Memory Model Features 0 = <TGran4,TGran64,SNSMem,BigEnd,16bit ASID,4TB PA>
Memory Model Features 1 = <8bit VMID>
Memory Model Features 2 = <32bit CCIDX,48bit VA>
Debug Features 0 = <2 CTX BKPTs,2 Watchpoints,2 Breakpoints,Debugv8>
Debug Features 1 = <>
Auxiliary Features 0 = <>
Auxiliary Features 1 = <>
WARNING: WITNESS option enabled, expect reduced performance.
ugen0.1: <0x15ad XHCI root HUB> at usbus0
uhub0 on usbus0
uhub0: <0x15ad XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
Trying to mount root from ufs:/dev/ufs/rootfs [rw]...
Root mount waiting for: CAM usbus0
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <VMware Virtual SATA Hard Drive 00000001> ATA-6 SATA 2.x device
ada0: [_SERIAL_NUMBER_XXXXXXXXXXXXXXXXX]
ada0: 600.000MB/s transfers (SATA 3.x, UDMA5, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 51200MB (104857600 512 byte sectors)
pass1 at ahcich1 bus 0 scbus1 target 0 lun 0
pass1: <NECVMWar VMware SATA CD01 1.00> Removable CD-ROM SCSI device
pass1: [_SERIAL_NUMBER_XXXXXXXXXXXXXXXXX]
pass1: 600.000MB/s transfers (SATA 3.x, UDMA2, ATAPI 12bytes, PIO 8192bytes)
uhub0: 8 ports with 8 removable, self powered
ugen0.2: <VMware VMware Virtual USB Mouse> at usbus0
ums0 on uhub0
ums0: <VMware> on usbus0
ums0: 16 buttons and [XYZT] coordinates ID=0
Root mount waiting for: usbus0
ugen0.3: <VMware VMware Virtual USB Keyboard> at usbus0
ukbd0 on uhub0
ukbd0: <VMware> on usbus0
kbd1 at ukbd0
ugen0.4: <VMware, Inc. VMware Virtual USB Hub> at usbus0
uhub1 on uhub0
uhub1: <VMware, Inc.> on usbus0
Root mount waiting for: usbus0
uhub1: 7 ports with 7 removable, self powered
Root mount waiting for: usbus0
ugen0.5: <VMware, Inc. VMware Virtual USB Hub> at usbus0
uhub2 on uhub0
uhub2: <VMware, Inc.> on usbus0
Root mount waiting for: usbus0
uhub2: 7 ports with 7 removable, self powered
mountroot: waiting for device /dev/ufs/rootfs...
Dual Console: Video Primary, Serial Secondary
lo0: link state changed to UP
uhid0 on uhub0
uhid0: <VMware> on usbus0