NYC*BUG dmesgd

Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.

---

Date: 2020-10-11 12:57:21
From: Klaus
Description: fbsd_SSDw/oSDcard-rpi4-4GB_w/o-armstub_uboot2020.10rc5_latestFW-masterRPIorg

Read start4.elf bytes  2224864 hnd 0x00001373 hash 'de61c6289ccede8c'
Read fixup4.dat bytes     5420 hnd 0x0000001c hash '2f8a43ba4a2efa0e'
0x00c03111 0x00000000 0x0000001f
MEM GPU: 76 ARM: 947 TOTAL: 1023
Starting start4.elf @ 0xfeb00200 partition 0

MESS:00:00:05.778942:0: bfs_xhci_retrieve 3ee69a60
MESS:00:00:05.780618:0: bfs_xhci_retrieve VL805 flags 00000001
MESS:00:00:05.797594:0: brfs: File read: /mfs/sd/config.txt
MESS:00:00:05.800374:0: brfs: File read: 190 bytes
MESS:00:00:05.870515:0: brfs: File read: /mfs/sd/config.txt
MESS:00:00:05.887942:0: brfs: File read: 190 bytes
MESS:00:00:06.369230:0: gpioman: gpioman_get_pin_num: pin DISPLAY_DSI_PORT not defined
MESS:00:00:06.376485:0: *** Restart logging
MESS:00:00:06.383746:0: hdmi: HDMI:hdmi_get_state is deprecated, use hdmi_get_display_state instead
MESS:00:00:06.393037:0: hdmi: HDMI:hdmi_get_state is deprecated, use hdmi_get_display_state instead
MESS:00:00:06.398971:0: HDMI0: hdmi_pixel_encoding: 300000000
MESS:00:00:06.404444:0: HDMI1: hdmi_pixel_encoding: 300000000
MESS:00:00:06.414653:0: dtb_file 'bcm2711-rpi-4-b.dtb'
MESS:00:00:06.420107:0: brfs: File read: /mfs/sd/bcm2711-rpi-4-b.dtb
MESS:00:00:06.423354:0: Loading 'bcm2711-rpi-4-b.dtb' to 0x4000 size 0xb99c
MESS:00:00:06.442093:0: brfs: File read: 47516 bytes
MESS:00:00:06.452109:0: brfs: File read: /mfs/sd/overlays/overlay_map.dtb
MESS:00:00:06.510431:0: brfs: File read: 1463 bytes
MESS:00:00:06.513425:0: brfs: File read: /mfs/sd/config.txt
MESS:00:00:06.517517:0: dtparam: audio=on
MESS:00:00:06.530071:0: dtparam: i2c_arm=on
MESS:00:00:06.539086:0: dtparam: spi=on
MESS:00:00:06.547639:0: brfs: File read: 190 bytes
MESS:00:00:06.555249:0: brfs: File read: /mfs/sd/overlays/miniuart-bt.dtbo
MESS:00:00:06.578484:0: Loaded overlay 'miniuart-bt'
MESS:00:00:06.626150:0: brfs: File read: 1819 bytes
MESS:00:00:06.630423:0: brfs: File read: /mfs/sd/overlays/mmc.dtbo
MESS:00:00:06.645542:0: Loaded overlay 'mmc'
MESS:00:00:06.675329:0: brfs: File read: 1221 bytes
MESS:00:00:06.680104:0: brfs: File read: /mfs/sd/overlays/pwm.dtbo
MESS:00:00:06.689364:0: Loaded overlay 'pwm'
MESS:00:00:06.710682:0: brfs: File read: 985 bytes
MESS:00:00:06.715132:0: Failed to open command line file 'cmdline.txt'
MESS:00:00:07.780157:0: brfs: File read: /mfs/sd/u-boot.bin
MESS:00:00:07.782623:0: Loading 'u-boot.bin' to 0x80000 size 0x8c708
MESS:00:00:07.788709:0: Device tree loaded to 0x4000 (size 0xbec4)
MESS:00:00:07.796493:0: uart: Set PL011 baud rate to 103448.300000 Hz
MESS:00:00:07.803670:0: uart: Baud rate change done...
MESS:00:00:07.805693:0: uart: Baud rate change done...
MESS:00:00:07.810772:0: bfs_xhci_stop
MESS:00:00:07.813939:0: XHCI-STOP
MESS:00:00:07.817055:0: xHC ver: 256 HCS: 05000420 fc000031 00e70004 HCC: 002841eb
MESS:00:00:07.826727:0: arasan: arasan_emmc_close


U-Boot 2020.10-rc5 (Oct 05 2020 - 03:08:23 +0000)

DRAM:  3.9 GiB
RPI 4 Model B (0xc03111)
MMC:   mmc@7e300000: 1, emmc2@7e340000: 0
Loading Environment from FAT... In:    serial
Out:   serial
Err:   serial
Net:   eth0: ethernet@7d580000
PCIe BRCM: link up, 5.0 Gbps x1 (SSC)
starting USB...
Bus xhci_pci: Register 5000420 NbrPorts 5
Starting the controller
USB XHCI 1.00
scanning bus xhci_pci for devices... 6 USB Device(s) found
       scanning usb for storage devices... 1 Storage Device(s) found
Hit any key to stop autoboot:  0 
Card did not respond to voltage select!

Device 0: Vendor: JMicron  Rev: 3202 Prod: Tech            
            Type: Hard Disk
            Capacity: 114473.4 MB = 111.7 GB (234441648 x 512)
... is now current device
Scanning usb 0:1...
Found EFI removable media binary efi/boot/bootaa64.efi
libfdt fdt_check_header(): FDT_ERR_BADMAGIC
Scanning disk [_EMAIL_XXXXXXX]...
Disk [_EMAIL_XXXXXXX] not ready
Card did not respond to voltage select!
Scanning disk [_EMAIL_XXXXXXXXX]...
Disk [_EMAIL_XXXXXXXXX] not ready
Scanning disk usb_mass_storage.lun0...
** Unrecognized filesystem type **
Found 3 disks
No EFI system partition
BootOrder not defined
EFI boot manager: Cannot load any image
688192 bytes read in 6 ms (109.4 MiB/s)
libfdt fdt_check_header(): FDT_ERR_BADMAGIC
Booting /efi\boot\bootaa64.efi


Consoles: EFI console  
    Reading loader env vars from /efi/freebsd/loader.env
Setting currdev to disk0p1:
FreeBSD/arm64 EFI loader, Revision 1.1
(Thu Jun 11 07:40:35 UTC 2020 [_EMAIL_XXXXXXXXXXXXXXXXXXX])

   Command line arguments: loader.efi
   Image base: 0x39d82000
   EFI version: 2.80
   EFI Firmware: Das U-Boot (rev 8224.4096)
   Console: comconsole (0)
   Load Path: /efi\boot\bootaa64.efi
   Load Device: /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/UsbClass(0x0,0x0,0x9,0x0,0x3)/UsbClass(0x152d,0x578,0x0,0x0,0x0)/HD(1,0x01,0,0x81f,0x18fa8)
Trying ESP: /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/UsbClass(0x0,0x0,0x9,0x0,0x3)/UsbClass(0x152d,0x578,0x0,0x0,0x0)/HD(1,0x01,0,0x81f,0x18fa8)
Setting currdev to disk0p1:
Trying: /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/UsbClass(0x0,0x0,0x9,0x0,0x3)/UsbClass(0x152d,0x578,0x0,0x0,0x0)/HD(2,0x01,0,0x197c7,0x76da839)
Setting currdev to disk0p2:
Loading /boot/defaults/loader.conf
Loading /boot/defaults/loader.conf
Loading /boot/device.hints
Loading /boot/loader.conf
Loading /boot/loader.conf.local
|
Loading kernel...
/boot/kernel/kernel text=0x2a8 text=0x7a7060 text=0x1b0d9c data=0x194600 data=0x0+0x302da6 syms=[0x8+0x178ba8+0x8+0x156776]
Loading configured modules...
/etc/hostid size=0x25
/boot/entropy size=0x1000
/boot/kernel/umodem.ko text=0x1be0 text=0xfb0 data=0x618+0x8 syms=[0x8+0xe40+0x8+0xa8c]

Hit [Enter] to boot immediately, or any other key for command prompt.

Type '?' for a list of commands, 'help' for more detailed help.
OK boot -s
Using DTB provided by EFI at 0x7ef1000.
---<<BOOT>>---
KDB: debugger backends: ddb
KDB: current backend: ddb
Copyright (c) 1992-2020 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 13.0-CURRENT #39 a1d832e8c08-c271678(master): Fri Jul 17 04:56:52 UTC 2020
    root@generic:/usr/obj/usr/src/arm64.aarch64/sys/GENERIC-NODEBUG arm64
FreeBSD clang version 11.0.0 ([_EMAIL_XXXXX]:llvm/llvm-project.git llvmorg-11.0.0-rc2-0-g414f32a9e86)
VT: init without driver.
module firmware already present!
KLD file umodem.ko is missing dependencies
No PSCI/SMCCC call function found
real memory  = 4146876416 (3954 MB)
avail memory = 4023062528 (3836 MB)
Starting CPU 1 (1)
panic: No PSCI/SMCCC call function set
cpuid = 0
time = 1
KDB: stack backtrace:
db_trace_self() at db_trace_self_wrapper+0x30
	 pc = 0xffff0000007289ac  lr = 0xffff000000195878
	 sp = 0xffff0000000cb440  fp = 0xffff0000000cb640

db_trace_self_wrapper() at kdb_backtrace+0x38
	 pc = 0xffff000000195878  lr = 0xffff0000004b6d6c
	 sp = 0xffff0000000cb650  fp = 0xffff0000000cb710

kdb_backtrace() at vpanic+0x19c
	 pc = 0xffff0000004b6d6c  lr = 0xffff0000004744f8
	 sp = 0xffff0000000cb720  fp = 0xffff0000000cb770

vpanic() at panic+0x44
	 pc = 0xffff0000004744f8  lr = 0xffff000000474358
	 sp = 0xffff0000000cb780  fp = 0xffff0000000cb830

panic() at psci_def_callfn+0x10
	 pc = 0xffff000000474358  lr = 0xffff00000076dfdc
	 sp = 0xffff0000000cb840  fp = 0xffff0000000cb840

psci_def_callfn() at psci_call+0x28
	 pc = 0xffff00000076dfdc  lr = 0xffff00000076e0b0
	 sp = 0xffff0000000cb850  fp = 0xffff0000000cb860

psci_call() at psci_cpu_on+0x30
	 pc = 0xffff00000076e0b0  lr = 0xffff00000076e0f0
	 sp = 0xffff0000000cb870  fp = 0xffff0000000cb870

psci_cpu_on() at start_cpu+0x11c
	 pc = 0xffff00000076e0f0  lr = 0xffff000000737814
	 sp = 0xffff0000000cb880  fp = 0xffff0000000cb880

start_cpu() at cpu_init_fdt+0x34
	 pc = 0xffff000000737814  lr = 0xffff000000736aec
	 sp = 0xffff0000000cb890  fp = 0xffff0000000cb8f0

cpu_init_fdt() at ofw_cpu_early_foreach+0x180
	 pc = 0xffff000000736aec  lr = 0xffff00000027dbcc
	 sp = 0xffff0000000cb900  fp = 0xffff0000000cb950

ofw_cpu_early_foreach() at cpu_mp_start+0x98
	 pc = 0xffff00000027dbcc  lr = 0xffff000000736a2c
	 sp = 0xffff0000000cb960  fp = 0xffff0000000cb9b0

cpu_mp_start() at mp_start+0x94
	 pc = 0xffff000000736a2c  lr = 0xffff0000004c8fdc
	 sp = 0xffff0000000cb9c0  fp = 0xffff0000000cb9e0

mp_start() at mi_startup+0x128
	 pc = 0xffff0000004c8fdc  lr = 0xffff00000040e5cc
	 sp = 0xffff0000000cb9f0  fp = 0xffff0000000cba10

mi_startup() at virtdone+0x60
	 pc = 0xffff00000040e5cc  lr = 0xffff000000001094
	 sp = 0xffff0000000cba20  fp = 0x0000000000000000

KDB: enter: panic
[ thread pid 0 tid 0 ]
Stopped at      0
db> 

All comments/news/posts are the property of their individual owner and is presented without warranty of suitability, and solely as an informational resource.
This site Copyright © 2004-2024 NYC*BUG.