Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2020-10-14 23:56:03
From: Klaus
Description: fbsd_SSDw/oSDcard-rpi4-4GB_uboot2020.10rc5_testStart4.elf_fromRPIorg_success
recover4.elf not found (6)
recovery.elf not found (6)
Read start4.elf bytes 2224928 hnd 0x00000d85 hash 'cf13213d9998b691'
Read fixup4.dat bytes 5417 hnd 0x0000039a hash '4761075e0d204e79'
0x00c03111 0x00000000 0x0000001f
MEM GPU: 76 ARM: 947 TOTAL: 1023
Starting start4.elf @ 0xfeb00200 partition 0
MESS:00:00:08.892502:0: bfs_xhci_retrieve 3ee69a80
MESS:00:00:08.894177:0: bfs_xhci_retrieve VL805 flags 00000001
MESS:00:00:08.912640:0: brfs: File read: /mfs/sd/config.txt
MESS:00:00:08.915390:0: brfs: File read: 163 bytes
MESS:00:00:09.014769:0: brfs: File read: /mfs/sd/config.txt
MESS:00:00:09.032194:0: brfs: File read: 163 bytes
MESS:00:00:09.513072:0: gpioman: gpioman_get_pin_num: pin DISPLAY_DSI_PORT not defined
MESS:00:00:09.520326:0: *** Restart logging
MESS:00:00:09.564978:0: hdmi: HDMI:hdmi_get_state is deprecated, use hdmi_get_display_state instead
MESS:00:00:09.570920:0: HDMI0: hdmi_pixel_encoding: 300000000
MESS:00:00:09.576400:0: HDMI1: hdmi_pixel_encoding: 300000000
MESS:00:00:09.586828:0: dtb_file 'bcm2711-rpi-4-b.dtb'
MESS:00:00:09.593486:0: brfs: File read: /mfs/sd/bcm2711-rpi-4-b.dtb
MESS:00:00:09.596731:0: Loading 'bcm2711-rpi-4-b.dtb' to 0x4000 size 0xb99c
MESS:00:00:09.615686:0: brfs: File read: 47516 bytes
MESS:00:00:09.626453:0: brfs: File read: /mfs/sd/overlays/overlay_map.dtb
MESS:00:00:09.684965:0: brfs: File read: 1463 bytes
MESS:00:00:09.688116:0: brfs: File read: /mfs/sd/config.txt
MESS:00:00:09.692043:0: dtparam: audio=on
MESS:00:00:09.704716:0: dtparam: i2c_arm=on
MESS:00:00:09.713745:0: dtparam: spi=on
MESS:00:00:09.722288:0: brfs: File read: 163 bytes
MESS:00:00:09.731110:0: brfs: File read: /mfs/sd/overlays/disable-bt.dtbo
MESS:00:00:09.748749:0: Loaded overlay 'disable-bt'
MESS:00:00:09.781376:0: brfs: File read: 1073 bytes
MESS:00:00:09.785876:0: brfs: File read: /mfs/sd/overlays/mmc.dtbo
MESS:00:00:09.800749:0: Loaded overlay 'mmc'
MESS:00:00:09.830499:0: brfs: File read: 1221 bytes
MESS:00:00:09.835495:0: brfs: File read: /mfs/sd/overlays/pwm.dtbo
MESS:00:00:09.844848:0: Loaded overlay 'pwm'
MESS:00:00:09.866159:0: brfs: File read: 985 bytes
MESS:00:00:09.871012:0: Failed to open command line file 'cmdline.txt'
MESS:00:00:10.932629:0: brfs: File read: /mfs/sd/armstub8-gic.bin
MESS:00:00:10.935615:0: Loading 'armstub8-gic.bin' to 0x0 size 0x1700
MESS:00:00:10.941793:0: brfs: File read: 5888 bytes
MESS:00:00:10.984743:0: brfs: File read: /mfs/sd/u-boot.bin
MESS:00:00:10.987209:0: Loading 'u-boot.bin' to 0x80000 size 0x8c708
MESS:00:00:10.993295:0: Device tree loaded to 0x4000 (size 0xbe64)
MESS:00:00:11.001073:0: uart: Set PL011 baud rate to 103448.300000 Hz
MESS:00:00:11.008256:0: uart: Baud rate change done...
MESS:00:00:11.010279:0: uart: Baud rate change done...
MESS:00:00:11.015369:0: bfs_xhci_stop
MESS:00:00:11.018525:0: XHCI-STOP
MESS:00:00:11.021641:0: xHC ver: 256 HCS: 05000420 fc000031 00e70004 HCC: 002841eb
U-Boot 2020.10-rc5 (Oct 05 2020 - 03:08:23 +0000)
DRAM: 3.9 GiB
RPI 4 Model B (0xc03111)
MMC: mmc@7e300000: 1, emmc2@7e340000: 0
Loading Environment from FAT... In: serial
Out: vidconsole
Err: vidconsole
Net: eth0: ethernet@7d580000
PCIe BRCM: link up, 5.0 Gbps x1 (SSC)
starting USB...
Bus xhci_pci: Register 5000420 NbrPorts 5
Starting the controller
USB XHCI 1.00
scanning bus xhci_pci for devices... 6 USB Device(s) found
scanning usb for storage devices... 1 Storage Device(s) found
Hit any key to stop autoboot: 0
Card did not respond to voltage select!
Device 0: Vendor: JMicron Rev: 3202 Prod: Tech
Type: Hard Disk
Capacity: 114473.4 MB = 111.7 GB (234441648 x 512)
... is now current device
Scanning usb 0:1...
Found EFI removable media binary efi/boot/bootaa64.efi
libfdt fdt_check_header(): FDT_ERR_BADMAGIC
Scanning disk [_EMAIL_XXXXXXX]...
Disk [_EMAIL_XXXXXXX] not ready
Card did not respond to voltage select!
Scanning disk [_EMAIL_XXXXXXXXX]...
Disk [_EMAIL_XXXXXXXXX] not ready
Scanning disk usb_mass_storage.lun0...
** Unrecognized filesystem type **
Found 3 disks
No EFI system partition
BootOrder not defined
EFI boot manager: Cannot load any image
688192 bytes read in 21 ms (31.3 MiB/s)
libfdt fdt_check_header(): FDT_ERR_BADMAGIC
Booting /efi\boot\bootaa64.efi
Consoles: EFI console
Reading loader env vars from /efi/freebsd/loader.env
Setting currdev to disk0p1:
FreeBSD/arm64 EFI loader, Revision 1.1
(Thu Jun 11 07:40:35 UTC 2020 [_EMAIL_XXXXXXXXXXXXXXXXXXX])
Command line arguments: loader.efi
Image base: 0x39d82000
EFI version: 2.80
EFI Firmware: Das U-Boot (rev 8224.4096)
Console: comconsole (0)
Load Path: /efi\boot\bootaa64.efi
Load Device: /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/UsbClass(0x0,0x0,0x9,0x0,0x3)/UsbClass(0x2109,0x3431,0x9,0x0,0x1)/UsbClass(0x152d,0x578,0x0,0x0,0x0)/HD(1,0x01,0,0x81f,0x18fa8)
Trying ESP: /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/UsbClass(0x0,0x0,0x9,0x0,0x3)/UsbClass(0x2109,0x3431,0x9,0x0,0x1)/UsbClass(0x152d,0x578,0x0,0x0,0x0)/HD(1,0x01,0,0x81f,0x18fa8)
Setting currdev to disk0p1:
Trying: /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/UsbClass(0x0,0x0,0x9,0x0,0x3)/UsbClass(0x2109,0x3431,0x9,0x0,0x1)/UsbClass(0x152d,0x578,0x0,0x0,0x0)/HD(2,0x01,0,0x197c7,0x76da839)
Setting currdev to disk0p2:
Loading /boot/defaults/loader.conf
Loading /boot/defaults/loader.conf
Loading /boot/device.hints
Loading /boot/loader.conf
Loading /boot/loader.conf.local
Loading kernel...
/boot/kernel/kernel text=0x2a8 text=0x7a7060 text=0x1b0d9c data=0x194600 data=0x0+0x302da6 syms=[0x8+0x178ba8+0x8+0x156776]
Loading configured modules...
/boot/entropy size=0x1000
/boot/kernel/umodem.ko text=0x1be0 text=0xfb0 data=0x618+0x8 syms=[0x8+0xe40+0x8+0xa8c]
/etc/hostid size=0x25
Hit [Enter] to boot immediately, or any other key for command prompt.
Booting [/boot/kernel/kernel]...
Using DTB provided by EFI at 0x7ef1000.
EFI framebuffer information:
addr, size 0x3e3dc000, 0x6d8c00
dimensions 1824 x 984
stride 1824
masks 0x00ff0000, 0x0000ff00, 0x000000ff, 0xff000000
---<<BOOT>>---
KDB: debugger backends: ddb
KDB: current backend: ddb
Copyright (c) 1992-2020 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 13.0-CURRENT #39 a1d832e8c08-c271678(master): Fri Jul 17 04:56:52 UTC 2020
root@generic:/usr/obj/usr/src/arm64.aarch64/sys/GENERIC-NODEBUG arm64
FreeBSD clang version 11.0.0 ([_EMAIL_XXXXX]:llvm/llvm-project.git llvmorg-11.0.0-rc2-0-g414f32a9e86)
VT(efifb): resolution 1824x984
module firmware already present!
KLD file umodem.ko is missing dependencies
real memory = 4146876416 (3954 MB)
avail memory = 4023062528 (3836 MB)
Starting CPU 1 (1)
Starting CPU 2 (2)
Starting CPU 3 (3)
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
random: unblocking device.
random: entropy device external interface
MAP 39e33000 mode 2 pages 1
MAP 39e37000 mode 2 pages 3
MAP 39e3b000 mode 2 pages 4
MAP 3b250000 mode 2 pages 16
MAP fe100000 mode 0 pages 1
WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 13.0.
kbd0 at kbdmux0
WARNING: Device "openfirm" is Giant locked and may be deleted before FreeBSD 13.0.
ofwbus0: <Open Firmware Device Tree>
simplebus0: <Flattened device tree simple bus> on ofwbus0
ofw_clkbus0: <OFW clocks bus> on ofwbus0
clk_fixed0: <Fixed clock> on ofw_clkbus0
clk_fixed1: <Fixed clock> on ofw_clkbus0
simplebus1: <Flattened device tree simple bus> on ofwbus0
simplebus2: <Flattened device tree simple bus> on ofwbus0
regfix0: <Fixed Regulator> on ofwbus0
regfix1: <Fixed Regulator> on ofwbus0
simplebus3: <Flattened device tree simple bus> on ofwbus0
clk_fixed2: <Fixed clock> on ofwbus0
regfix2: <Fixed Regulator> on ofwbus0
simple_mfd0: <Simple MFD (Multi-Functions Device)> mem 0x7d5d2000-0x7d5d2eff on simplebus0
psci0: <ARM Power State Co-ordination Interface Driver> on ofwbus0
gic0: <ARM Generic Interrupt Controller> mem 0x40041000-0x40041fff,0x40042000-0x40043fff,0x40044000-0x40045fff,0x40046000-0x40047fff irq 31 on simplebus0
gic0: pn 0x2, arch 0x2, rev 0x1, implementer 0x43b irqs 256
mbox0: <BCM2835 VideoCore Mailbox> mem 0x7e00b880-0x7e00b8bf irq 14 on simplebus0
bcm2835_firmware0: <BCM2835 Firmware> on simplebus0
ofw_clkbus1: <OFW clocks bus> on bcm2835_firmware0
gpio0: <Raspberry Pi Firmware GPIO controller> on bcm2835_firmware0
gpiobus0: <GPIO bus> on gpio0
gpioregulator0: <GPIO controlled regulator> on ofwbus0
generic_timer0: <ARMv8 Generic Timer> irq 4,5,6,7 on ofwbus0
Timecounter "ARM MPCore Timecounter" frequency 54000000 Hz quality 1000
Event timer "ARM MPCore Eventtimer" frequency 54000000 Hz quality 1000
usb_nop_xceiv0: <USB NOP PHY> on ofwbus0
uart0: <PrimeCell UART (PL011)> mem 0x7e201000-0x7e2011ff irq 17 on simplebus0
uart0: console (115200,n,8,1)
spi0: <BCM2708/2835 SPI controller> mem 0x7e204000-0x7e2041ff irq 19 on simplebus0
spibus0: <OFW SPI bus> on spi0
spibus0: <unknown card> at cs 0 mode 0
spibus0: <unknown card> at cs 1 mode 0
iichb0: <BCM2708/2835 BSC controller> mem 0x7e804000-0x7e804fff irq 27 on simplebus0
bcm_dma0: <BCM2835 DMA Controller> mem 0x7e007000-0x7e007aff irq 32,33,34,35,36,37,38,39,40,41,42 on simplebus0
bcmwd0: <BCM2708/2835 Watchdog> mem 0x7e100000-0x7e100113,0x7e00a000-0x7e00a023,0x7ec11000-0x7ec1101f on simplebus0
gpioc0: <GPIO controller> on gpio0
sdhci_bcm0: <Broadcom 2708 SDHCI controller> mem 0x7e300000-0x7e3000ff irq 58 on simplebus0
mmc0: <MMC/SD bus> on sdhci_bcm0
fb0: <BCM2835 VT framebuffer driver> on simplebus0
fb0: keeping existing fb bpp of 32
fbd0 on fb0
WARNING: Device "fb" is Giant locked and may be deleted before FreeBSD 13.0.
VT: Replacing driver "efifb" with new "fb".
fb0: 1824x984(1824x984@0,0) 32bpp
fb0: fbswap: 1, pitch 7296, base 0x3e3dc000, screen_size 7237632
sdhci_bcm1: <Broadcom 2708 SDHCI controller> mem 0x7e340000-0x7e3400ff irq 69 on simplebus1
mmc1: <MMC/SD bus> on sdhci_bcm1
pmu0: <Performance Monitoring Unit> irq 0,1,2,3 on ofwbus0
cpulist0: <Open Firmware CPU Group> on ofwbus0
cpu0: <Open Firmware CPU> on cpulist0
bcm2835_cpufreq0: <CPU Frequency Control> on cpu0
cpu1: <Open Firmware CPU> on cpulist0
cpu2: <Open Firmware CPU> on cpulist0
cpu3: <Open Firmware CPU> on cpulist0
pcib0: <BCM2838-compatible PCI-express controller> mem 0x7d500000-0x7d50930f irq 70,71 on simplebus2
pcib0: hardware identifies as revision 0x304.
pci0: <PCI bus> on pcib0
pcib1: <PCI-PCI bridge> irq 81 at device 0.0 on pci0
pci1: <PCI bus> on pcib1
bcm_xhci0: <VL805 USB 3.0 controller (on the Raspberry Pi 4b)> irq 82 at device 0.0 on pci1
bcm_xhci0: 32 bytes context size, 64-bit DMA
usbus0 on bcm_xhci0
genet0: <RPi4 Gigabit Ethernet> mem 0x7d580000-0x7d58ffff irq 72,73 on simplebus2
genet0: GENET version 5.0 phy 0x0000
miibus0: <MII bus> on genet0
brgphy0: <BCM54213PE 1000BASE-T media interface> PHY 1 on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto
genet0: Ethernet address: [_MAC_XXXXXXXXXX]
gpioled0: <GPIO LEDs> on ofwbus0
gpioled0: <led0> failed to map pin
cryptosoft0: <software crypto>
Timecounters tick every 1.000 msec
iicbus0: <OFW I2C bus> on iichb0
iic0: <I2C generic I/O> on iicbus0
usbus0: 5.0Gbps Super Speed USB v3.0
sdhci_bcm0-slot0: Got command interrupt 0x00030000, but there is no active command.
sdhci_bcm0-slot0: ============== REGISTER DUMP ==============
sdhci_bcm0-slot0: Sys addr: 0x00000000 | Version: 0x00009902
sdhci_bcm0-slot0: Blk size: 0x00000000 | Blk cnt: 0x00000000
sdhci_bcm0-slot0: Argument: 0x000001aa | Trn mode: 0x00000000
sdhci_bcm0-slot0: Present: 0x000f0000 | Host ctl: 0x00000001
sdhci_bcm0-slot0: Power: 0x0000000f | Blk gap: 0x00000000
sdhci_bcm0-slot0: Wake-up: 0x00000000 | Clock: 0x00003947
sdhci_bcm0-slot0: Timeout: 0x00000000 | Int stat: 0x00000000
sdhci_bcm0-slot0: Int enab: 0x01ff00bb | Sig enab: 0x01ff00bb
sdhci_bcm0-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000
sdhci_bcm0-slot0: Caps: 0x00000000 | Caps2: 0x00000000
sdhci_bcm0-slot0: Max curr: 0x00000001 | ADMA err: 0x00000000
sdhci_bcm0-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000
sdhci_bcm0-slot0: ===========================================
ugen0.1: <0x1106 XHCI root HUB> at usbus0
uhub0 on usbus0
uhub0: <0x1106 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
sdhci_bcm0-slot0: Got command interrupt 0x00030000, but there is no active command.
sdhci_bcm0-slot0: ============== REGISTER DUMP ==============
sdhci_bcm0-slot0: Sys addr: 0x00000000 | Version: 0x00009902
sdhci_bcm0-slot0: Blk size: 0x00000000 | Blk cnt: 0x00000000
sdhci_bcm0-slot0: Argument: 0x000001aa | Trn mode: 0x00000000
sdhci_bcm0-slot0: Present: 0x000f0000 | Host ctl: 0x00000001
sdhci_bcm0-slot0: Power: 0x0000000f | Blk gap: 0x00000000
sdhci_bcm0-slot0: Wake-up: 0x00000000 | Clock: 0x00003947
sdhci_bcm0-slot0: Timeout: 0x00000000 | Int stat: 0x00000000
sdhci_bcm0-slot0: Int enab: 0x01ff00bb | Sig enab: 0x01ff00bb
sdhci_bcm0-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000
sdhci_bcm0-slot0: Caps: 0x00000000 | Caps2: 0x00000000
sdhci_bcm0-slot0: Max curr: 0x00000001 | ADMA err: 0x00000000
sdhci_bcm0-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000
sdhci_bcm0-slot0: ===========================================
sdhci_bcm0-slot0: Got command interrupt 0x00030000, but there is no active command.
sdhci_bcm0-slot0: ============== REGISTER DUMP ==============
sdhci_bcm0-slot0: Sys addr: 0x00000000 | Version: 0x00009902
sdhci_bcm0-slot0: Blk size: 0x00000000 | Blk cnt: 0x00000000
sdhci_bcm0-slot0: Argument: 0x00000000 | Trn mode: 0x00000000
sdhci_bcm0-slot0: Present: 0x000f0000 | Host ctl: 0x00000001
sdhci_bcm0-slot0: Power: 0x0000000f | Blk gap: 0x00000000
sdhci_bcm0-slot0: Wake-up: 0x00000000 | Clock: 0x00003947
sdhci_bcm0-slot0: Timeout: 0x00000000 | Int stat: 0x00000000
sdhci_bcm0-slot0: Int enab: 0x01ff00bb | Sig enab: 0x01ff00bb
sdhci_bcm0-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000
sdhci_bcm0-slot0: Caps: 0x00000000 | Caps2: 0x00000000
sdhci_bcm0-slot0: Max curr: 0x00000001 | ADMA err: 0x00000000
sdhci_bcm0-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000
sdhci_bcm0-slot0: ===========================================
sdhci_bcm0-slot0: Got command interrupt 0x00030000, but there is no active command.
sdhci_bcm0-slot0: ============== REGISTER DUMP ==============
sdhci_bcm0-slot0: Sys addr: 0x00000000 | Version: 0x00009902
sdhci_bcm0-slot0: Blk size: 0x00000000 | Blk cnt: 0x00000000
sdhci_bcm0-slot0: Argument: 0x00000000 | Trn mode: 0x00000000
sdhci_bcm0-slot0: Present: 0x000f0000 | Host ctl: 0x00000001
sdhci_bcm0-slot0: Power: 0x0000000f | Blk gap: 0x00000000
sdhci_bcm0-slot0: Wake-up: 0x00000000 | Clock: 0x00003947
sdhci_bcm0-slot0: Timeout: 0x00000000 | Int stat: 0x00000000
sdhci_bcm0-slot0: Int enab: 0x01ff00bb | Sig enab: 0x01ff00bb
sdhci_bcm0-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000
sdhci_bcm0-slot0: Caps: 0x00000000 | Caps2: 0x00000000
sdhci_bcm0-slot0: Max curr: 0x00000001 | ADMA err: 0x00000000
sdhci_bcm0-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000
sdhci_bcm0-slot0: ===========================================
sdhci_bcm0-slot0: Got command interrupt 0x00030000, but there is no active command.
sdhci_bcm0-slot0: ============== REGISTER DUMP ==============
sdhci_bcm0-slot0: Sys addr: 0x00000000 | Version: 0x00009902
sdhci_bcm0-slot0: Blk size: 0x00000000 | Blk cnt: 0x00000000
sdhci_bcm0-slot0: Argument: 0x00000000 | Trn mode: 0x00000000
sdhci_bcm0-slot0: Present: 0x000f0000 | Host ctl: 0x00000001
sdhci_bcm0-slot0: Power: 0x0000000f | Blk gap: 0x00000000
sdhci_bcm0-slot0: Wake-up: 0x00000000 | Clock: 0x00003947
sdhci_bcm0-slot0: Timeout: 0x00000000 | Int stat: 0x00000000
sdhci_bcm0-slot0: Int enab: 0x01ff00bb | Sig enab: 0x01ff00bb
sdhci_bcm0-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000
sdhci_bcm0-slot0: Caps: 0x00000000 | Caps2: 0x00000000
sdhci_bcm0-slot0: Max curr: 0x00000001 | ADMA err: 0x00000000
sdhci_bcm0-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000
sdhci_bcm0-slot0: ===========================================
sdhci_bcm0-slot0: Got command interrupt 0x00030000, but there is no active command.
sdhci_bcm0-slot0: ============== REGISTER DUMP ==============
sdhci_bcm0-slot0: Sys addr: 0x00000000 | Version: 0x00009902
sdhci_bcm0-slot0: Blk size: 0x00000000 | Blk cnt: 0x00000000
sdhci_bcm0-slot0: Argument: 0x00000000 | Trn mode: 0x00000000
sdhci_bcm0-slot0: Present: 0x000f0000 | Host ctl: 0x00000001
sdhci_bcm0-slot0: Power: 0x0000000f | Blk gap: 0x00000000
sdhci_bcm0-slot0: Wake-up: 0x00000000 | Clock: 0x00003947
sdhci_bcm0-slot0: Timeout: 0x00000000 | Int stat: 0x00000000
sdhci_bcm0-slot0: Int enab: 0x01ff00bb | Sig enab: 0x01ff00bb
sdhci_bcm0-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000
sdhci_bcm0-slot0: Caps: 0x00000000 | Caps2: 0x00000000
sdhci_bcm0-slot0: Max curr: 0x00000001 | ADMA err: 0x00000000
sdhci_bcm0-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000
sdhci_bcm0-slot0: ===========================================
mmc0: No compatible cards found on bus
mmc1: No compatible cards found on bus
bcm2835_cpufreq0: ARM 600MHz, Core 200MHz, SDRAM 400MHz, Turbo OFF
Release APs...done
CPU 0: ARM Cortex-A72 r0p3 affinity: 0
Trying to mount root from ufs:/dev/ufs/rootfs [rw]...
Cache Type = <64 byte D-cacheline,64 byte I-cacheline,PIPT ICache,64 byte ERG,64 byte CWG>
Root mount waiting for: Instruction Set Attributes 0 = <CRC32>
usbus0
Instruction Set Attributes 1 = <>
Processor Features 0 = <AdvSIMD,FP,EL3 32,EL2 32,EL1 32,EL0 32>
Processor Features 1 = <>
Memory Model Features 0 = <TGran4,TGran64,SNSMem,BigEnd,16bit ASID,16TB PA>
Memory Model Features 1 = <8bit VMID>
Memory Model Features 2 = <32bit CCIDX,48bit VA>
Debug Features 0 = <2 CTX BKPTs,4 Watchpoints,6 Breakpoints,PMUv3,Debugv8>
Debug Features 1 = <>
Auxiliary Features 0 = <>
Auxiliary Features 1 = <>
CPU 1: ARM Cortex-A72 r0p3 affinity: 1
CPU 2: ARM Cortex-A72 r0p3 affinity: 2
CPU 3: ARM Cortex-A72 r0p3 affinity: 3
uhub0: 5 ports with 4 removable, self powered
ugen0.2: <vendor 0x2109 USB2.0 Hub> at usbus0
uhub1 on uhub0
uhub1: <vendor 0x2109 USB2.0 Hub, class 9/0, rev 2.10/4.21, addr 1> on usbus0
Root mount waiting for: usbus0
uhub1: 4 ports with 4 removable, self powered
Root mount waiting for: usbus0
Root mount waiting for: usbus0
ugen0.3: <JMicron External Disk 3.0> at usbus0
umass0 on uhub1
umass0: <JMicron External Disk 3.0, class 0/0, rev 2.10/32.02, addr 2> on usbus0
da0 at umass-sim0 bus 0 scbus0 target 0 lun 0
da0: <JMicron Tech 3202> Fixed Direct Access SPC-4 SCSI device
da0: [_SERIAL_NUMBER_XXXXXXXXXXXXXXXXX]
da0: 40.000MB/s transfers
da0: 114473MB (234441648 512 byte sectors)
da0: quirks=0x2<NO_6_BYTE>
ugen0.4: <Mitsumi Electric Hub in Apple Extended USB Keyboard> at usbus0
uhub2 on uhub1
uhub2: <Mitsumi Electric Hub in Apple Extended USB Keyboard, class 9/0, rev 1.10/4.20, addr 3> on usbus0
uhub2: 3 ports with 2 removable, bus powered
Root mount waiting for: usbus0
Root mount waiting for: usbus0
Root mount waiting for: usbus0
ugen0.5: <SIGMACHIP Usb Mouse> at usbus0
ugen0.6: <Mitsumi Electric Apple Extended USB Keyboard> at usbus0
ukbd0 on uhub2
ukbd0: <Mitsumi Electric Apple Extended USB Keyboard, class 0/0, rev 1.10/4.20, addr 5> on usbus0
kbd1 at ukbd0
mountroot: waiting for device /dev/ufs/rootfs...
Warning: no time-of-day clock registered, system time will not be set accurately
Setting hostuuid: 30303031-3030-3030-6663-613230626663.
Setting hostid: 0x4ea5205f.
No suitable dump device was found.
Starting file system checks:
/dev/ufs/rootfs: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ufs/rootfs: clean, 6811235 free (30907 frags, 847541 blocks, 0.2% fragmentation)
Mounting local filesystems:.
ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/local/lib /usr/local/lib/compat/pkg /usr/local/lib/compat/pkg /usr/local/lib/graphviz /usr/local/lib/perl5/5.30/mach/CORE /usr/local/lib/samba4 /usr/local/llvm80/lib
Setting hostname: generic.
Setting up harvesting: [UMA],[FS_ATIME],SWI,INTERRUPT,NET_NG,[NET_ETHER],NET_TUN,MOUSE,KEYBOARD,ATTACH,CACHED
Feeding entropy: ugen0.5: <SIGMACHIP Usb Mouse> at usbus0 (disconnected)
.
lo0: link state changed to UP
genet0: link state changed to DOWN
ugen0.5: <SIGMACHIP Usb Mouse> at usbus0
Starting Network: lo0 genet0.
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
options=680003<RXCSUM,TXCSUM,LINKSTATE,RXCSUM_IPV6,TXCSUM_IPV6>
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x2
inet[_IP_XXXX] netmask 0xff000000
groups: lo
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
genet0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=68000b<RXCSUM,TXCSUM,VLAN_MTU,LINKSTATE,RXCSUM_IPV6,TXCSUM_IPV6>
ether [_MAC_XXXXXXXXXX]
media: Ethernet autoselect (none)
status: no carrier
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
Starting devd.
ugen0.5: <SIGMACHIP Usb Mouse> at usbus0 (disconnected)
ugen0.5: <SIGMACHIP Usb Mouse> at usbus0
genet0: link state changed to UP
ugen0.5: <SIGMACHIP Usb Mouse> at usbus0 (disconnected)
ugen0.5: <SIGMACHIP Usb Mouse> at usbus0
ugen0.5: <SIGMACHIP Usb Mouse> at usbus0 (disconnected)
ugen0.5: <SIGMACHIP Usb Mouse> at usbus0
Autoloading module: uhid.ko
Autoloading module: ums.ko
ums0 on uhub2
ums0: <SIGMACHIP Usb Mouse, class 0/0, rev 1.10/1.10, addr 4> on usbus0
ums0: 3 buttons and [XYZ] coordinates ID=0
uhid0 on uhub2
uhid0: <Mitsumi Electric Apple Extended USB Keyboard, class 0/0, rev 1.10/4.20, addr 5> on usbus0
Autoloading module: uhid.ko
Autoloading module: wmt.ko
Autoloading module: uhid.ko
Autoloading module: ums.ko
Autoloading module: uhid.ko
Autoloading module: ums.ko
Starting dhclient.
DHCPREQUEST on genet0 to[_IP_XXXXXXXXXX] port 67
DHCPACK from[_IP_XXXXXX]
bound to[_IP_XXXXXXXX] -- renewal in 43200 seconds.
Autoloading module: uhid.ko
Autoloading module: ums.ko
Autoloading module: uhid.ko
Autoloading module: ums.ko
Starting ums0 moused.
add host[_IP_XXXX]: gateway lo0 fib 0: route already in table
add host ::1: gateway lo0 fib 0: route already in table
add net fe80::: gateway ::1
add net ff02::: gateway ::1
add net ::ffff:0.0.0.0: gateway ::1
add net ::0.0.0.0: gateway ::1
Creating and/or trimming log files.
Starting syslogd.
Clearing /tmp (X related).
Updating motd:.
Mounting late filesystems:.
Updating /var/run/os-release done.
Configuring vt: blanktime.
Performing sanity check on sshd configuration.
Starting sshd.
Starting cron.
Starting background file system checks in 60 seconds.
Tue Sep 1 14:12:23 UTC 2020
FreeBSD/arm64 (generic) (ttyu0)
login: