Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2020-10-19 21:20:16
From: emaste
Description: FreeBSD 13 on Traverse Ten64
---<<BOOT>>---
KDB: debugger backends: ddb
KDB: current backend: ddb
Copyright (c) 1992-2020 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 13.0-CURRENT #0 2fa296b785e-c253766(main): Thu Oct 15 05:27:35 UTC 2020
[_EMAIL_XXXXXXXXXXXXXXXXXXX]:/usr/obj/usr/src/arm64.aarch64/sys/GENERIC arm64
FreeBSD clang version 11.0.0 ([_EMAIL_XXXXX]:llvm/llvm-project.git llvmorg-11.0.0-0-g176249bd673)
WARNING: WITNESS option enabled, expect reduced performance.
VT: init without driver.
module firmware already present!
real memory = 3688775680 (3517 MB)
avail memory = 3572015104 (3406 MB)
Starting CPU 1 (1)
Starting CPU 2 (2)
Starting CPU 3 (3)
Starting CPU 4 (100)
Starting CPU 5 (101)
Starting CPU 6 (102)
Starting CPU 7 (103)
FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
arc4random: WARNING: initial seeding bypassed the cryptographic random device because it was not yet seeded and the knob 'bypass_before_seeding' was enabled.
random: entropy device external interface
MAP f69cb000 mode 2 pages 1
MAP fbcd0000 mode 2 pages 16
MAP 80dfff8000 mode 2 pages 1
MAP 80dfffb000 mode 2 pages 1
WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 13.0.
kbd0 at kbdmux0
WARNING: Device "openfirm" is Giant locked and may be deleted before FreeBSD 13.0.
ofwbus0: <Open Firmware Device Tree>
clk_fixed0: <Fixed clock> on ofwbus0
simplebus0: <Flattened device tree simple bus> on ofwbus0
psci0: <ARM Power State Co-ordination Interface Driver> on ofwbus0
gic0: <ARM Generic Interrupt Controller v3.0> mem 0x6000000-0x600ffff,0x6100000-0x61fffff,0xc0c0000-0xc0c1fff,0xc0d0000-0xc0d0fff,0xc0e0000-0xc0fffff irq 0 on ofwbus0
its0: <ARM GIC Interrupt Translation Service> mem 0x6020000-0x603ffff on gic0
generic_timer0: <ARMv8 Generic Timer> irq 1,2,3,4 on ofwbus0
Timecounter "ARM MPCore Timecounter" frequency 25000050 Hz quality 1000
Event timer "ARM MPCore Eventtimer" frequency 25000050 Hz quality 1000
cpulist0: <Open Firmware CPU Group> on ofwbus0
cpu0: <Open Firmware CPU> on cpulist0
cpu1: <Open Firmware CPU> on cpulist0
cpu2: <Open Firmware CPU> on cpulist0
cpu3: <Open Firmware CPU> on cpulist0
cpu4: <Open Firmware CPU> on cpulist0
cpu5: <Open Firmware CPU> on cpulist0
cpu6: <Open Firmware CPU> on cpulist0
cpu7: <Open Firmware CPU> on cpulist0
uart0: <16550 or compatible> mem 0x21c0500-0x21c05ff irq 7 on simplebus0
uart0: console (115131,n,8,1)
uart1: <16550 or compatible> mem 0x21c0600-0x21c06ff irq 8 on simplebus0
gpio0: <Integrated GPIO Controller> mem 0x2300000-0x230ffff irq 9 on simplebus0
gpiobus0: <GPIO bus> on gpio0
gpioc0: <GPIO controller> on gpio0
gpio1: <Integrated GPIO Controller> mem 0x2310000-0x231ffff irq 10 on simplebus0
gpiobus1: <GPIO bus> on gpio1
gpioc1: <GPIO controller> on gpio1
gpio2: <Integrated GPIO Controller> mem 0x2320000-0x232ffff irq 11 on simplebus0
gpiobus2: <GPIO bus> on gpio2
gpioc2: <GPIO controller> on gpio2
gpio3: <Integrated GPIO Controller> mem 0x2330000-0x233ffff irq 12 on simplebus0
gpiobus3: <GPIO bus> on gpio3
gpioc3: <GPIO controller> on gpio3
i2c0: <Vybrid Family Inter-Integrated Circuit (I2C)> mem 0x2000000-0x200ffff irq 14 on simplebus0
i2c0: Parent clock not found.
iicbus0: <OFW I2C bus> on i2c0
iic0: <I2C generic I/O> on iicbus0
iicbus0: <unknown card> at addr 0x30
iicbus0: <unknown card> at addr 0x22
iicbus0: <unknown card> at addr 0x34
iicbus0: <unknown card> at addr 0x98
iicbus0: <unknown card> at addr 0x52
iicbus0: <unknown card> at addr 0x5e
iicbus0: <unknown card> at addr 0xc0
iicbus0: <unknown card> at addr 0xc4
iicbus0: <unknown card> at addr 0xc8
iicbus0: <unknown card> at addr 0xec
i2c1: <Vybrid Family Inter-Integrated Circuit (I2C)> mem 0x2020000-0x202ffff irq 16 on simplebus0
i2c1: Parent clock not found.
iicbus1: <OFW I2C bus> on i2c1
iic1: <I2C generic I/O> on iicbus1
iicbus1: <unknown card> at addr 0x64
i2c2: <Vybrid Family Inter-Integrated Circuit (I2C)> mem 0x2030000-0x203ffff irq 17 on simplebus0
i2c2: Parent clock not found.
iicbus2: <OFW I2C bus> on i2c2
iic2: <I2C generic I/O> on iicbus2
iicbus2: <unknown card> at addr 0xe0
sdhci_fsl_fdt0: <NXP QorIQ Layerscape eSDHC controller> mem 0x2140000-0x214ffff irq 18 on simplebus0
sdhci_fsl_fdt0: Parent clock not found
device_attach: sdhci_fsl_fdt0 attach returned 2
xhci0: <Synopsys Designware DWC3> mem 0x3100000-0x310ffff irq 19 on simplebus0
xhci0: 64 bytes context size, 32-bit DMA
usbus0: trying to attach
usbus0 on xhci0
xhci1: <Synopsys Designware DWC3> mem 0x3110000-0x311ffff irq 20 on simplebus0
xhci1: 64 bytes context size, 32-bit DMA
usbus1: trying to attach
usbus1 on xhci1
gpioled0: <GPIO LEDs> on ofwbus0
cryptosoft0: <software crypto>
Timecounters tick every 1.000 msec
usbus0: 5.0Gbps Super Speed USB v3.0
usbus1: 5.0Gbps Super Speed USB v3.0
Release APs...done
CPU 0: ARM Cortex-A53 r0p4 affinity: 0 0
Trying to mount root from ufs:/dev/ufs/rootfs [rw]...
Cache Type = <64 byte D-cacheline,64 byte I-cacheline,VIPT ICache,64 byte ERG,64 byte CWG>
Root mount waiting for: usbus0 Instruction Set Attributes 0 = <CRC32,SHA2,SHA1,AES+PMULL>
usbus1 CAM
Instruction Set Attributes 1 = <>
Processor Features 0 = <GIC,AdvSIMD,FP,EL3 32,EL2 32,EL1 32,EL0 32>
Processor Features 1 = <>
Memory Model Features 0 = <TGran4,TGran64,SNSMem,BigEnd,16bit ASID,1TB PA>
Memory Model Features 1 = <8bit VMID>
Memory Model Features 2 = <32bit CCIDX,48bit VA>
Debug Features 0 = <2 CTX BKPTs,4 Watchpoints,6 Breakpoints,PMUv3,Debugv8>
Debug Features 1 = <>
Auxiliary Features 0 = <>
Auxiliary Features 1 = <>
CPU 1: ARM Cortex-A53 r0p4 affinity: 0 1
CPU 2: ARM Cortex-A53 r0p4 affinity: 0 2
CPU 3: ARM Cortex-A53 r0p4 affinity: 0 3
CPU 4: ARM Cortex-A53 r0p4 affinity: 1 0
CPU 5: ARM Cortex-A53 r0p4 affinity: 1 1
CPU 6: ARM Cortex-A53 r0p4 affinity: 1 2
CPU 7: ARM Cortex-A53 r0p4 affinity: 1 3
WARNING: WITNESS option enabled, expect reduced performance.
ugen1.1: <Synopsys XHCI root HUB> at usbus1
ugen0.1: <Synopsys XHCI root HUB> at usbus0
uhub0 on usbus1
uhub0: <Synopsys XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1
uhub1 on usbus0
uhub1: <Synopsys XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
ugen1.2: <Microchip Tech USB2744> at usbus1
uhub2 on uhub0
uhub2: <Microchip Tech USB2744, class 9/0, rev 2.10/2.08, addr 1> on usbus1
uhub2: MTT enabled
Root mount waiting for: usbus1
uhub2: 4 ports with 1 removable, self powered
ugen1.3: <Microchip Tech USB5744> at usbus1
Root mount waiting for: usbus1uhub3
on uhub0
uhub3: <Microchip Tech USB5744, class 9/0, rev 3.10/2.08, addr 2> on usbus1
uhub3: 4 ports with 1 removable, self powered
Root mount waiting for: usbus1
Root mount waiting for: usbus1
ugen1.4: <Samsung Portable SSD T3> at usbus1
umass0 on uhub3
umass0: <Samsung Portable SSD T3, class 0/0, rev 3.00/1.00, addr 3> on usbus1
umass0: SCSI over Bulk-Only; quirks = 0x0100
umass0:0:0: Attached to scbus0
da0 at umass-sim0 bus 0 scbus0 target 0 lun 0
da0: <Samsung Portable SSD T3 0> Fixed Direct Access SPC-4 SCSI device
da0: [_SERIAL_NUMBER_XXXXXXXXX]
da0: 400.000MB/s transfers
da0: 238475MB (488397168 512 byte sectors)
da0: quirks=0x2<NO_6_BYTE>
mountroot: waiting for device /dev/ufs/rootfs...