Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].


Date: 2020-10-30 20:35:50
From: darkain
Description: FreeBSD 13 under ESXi ARM Fling (most hardware working)
---<<BOOT>>---
KDB: debugger backends: ddb
KDB: current backend: ddb
Copyright (c) 1992-2020 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
    The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 13.0-CURRENT #2: Wed Oct 28 03:42:08 UTC 2020
    root@arm-bsd-13-builder:/usr/src/sys/arm64/compile/GENERIC arm64
FreeBSD clang version 11.0.0 (xxx@xxx.xxx:llvm/llvm-project.git llvmorg-11.0.0-0-g176249bd673)
WARNING: WITNESS option enabled, expect reduced performance.
VT(efifb): resolution 1024x768
module firmware already present!
real memory  = 2144911360 (2045 MB)
avail memory = 2058231808 (1962 MB)
Starting CPU 1 (1)
Starting CPU 2 (2)
Starting CPU 3 (3)
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
random: unblocking device.
random: entropy device external interface
MAP f87d0000 mode 2 pages 80
MAP f8820000 mode 2 pages 80
MAP f8870000 mode 2 pages 80
MAP f88c0000 mode 2 pages 80
MAP f8910000 mode 2 pages 80
MAP f8960000 mode 2 pages 80
MAP f89b0000 mode 2 pages 80
MAP f8a00000 mode 2 pages 80
MAP f8a50000 mode 2 pages 80
MAP f8aa0000 mode 2 pages 160
MAP fbe20000 mode 2 pages 144
MAP fbef0000 mode 2 pages 240
MAP 1000000 mode 0 pages 24
MAP 20000000 mode 0 pages 1
WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 13.0.
kbd0 at kbdmux0
WARNING: Device "openfirm" is Giant locked and may be deleted before FreeBSD 13.0.
ofwbus0: <Open Firmware Device Tree>
clk_fixed0: <Fixed clock> on ofwbus0
psci0: <ARM Power State Co-ordination Interface Driver> on ofwbus0
gic0: <ARM Generic Interrupt Controller> mem 0x2c010000-0x2c01ffff,0x2c002000-0x2c003fff irq 0 on ofwbus0
gic0: pn 0x0, arch 0x2, rev 0x0, implementer 0x902 irqs 992
gicv2m0: <ARM Generic Interrupt Controller MSI/MSIX> mem 0-0xfff on gic0
generic_timer0: <ARMv8 Generic Timer> irq 1,2,3,4 on ofwbus0
Timecounter "ARM MPCore Timecounter" frequency 54000000 Hz quality 1000
Event timer "ARM MPCore Eventtimer" frequency 54000000 Hz quality 1000
efirtc0: <EFI Realtime Clock>
efirtc0: registered as a time-of-day clock, resolution 1.000000s
cpulist0: <Open Firmware CPU Group> on ofwbus0
cpu0: <Open Firmware CPU> on cpulist0
cpu1: <Open Firmware CPU> on cpulist0
cpu2: <Open Firmware CPU> on cpulist0
cpu3: <Open Firmware CPU> on cpulist0
pcib0: <Generic PCI host controller> mem 0x40000000-0x4fffffff on ofwbus0
pci0: <PCI bus> on pcib0
vgapci0: <VGA-compatible display> mem 0x3f400000-0x3f7fffff,0x78000000-0x7fffffff at device 15.0 on pci0
vgapci0: Boot video device
pcib1: <PCI-PCI bridge> at device 17.0 on pci0
pci1: <PCI bus> on pcib1
uhci0: <UHCI (generic) USB controller> port 0xe000-0xe01f at device 0.0 on pci1
uhci0: LegSup = 0x0000
usbus0 on uhci0
ehci0: <EHCI (generic) USB 2.0 controller> mem 0x3fa01000-0x3fa01fff at device 1.0 on pci1
usbus1: EHCI version 1.0
usbus1 on ehci0
ahci0: <AHCI SATA controller> mem 0x3fa00000-0x3fa00fff at device 3.0 on pci1
ahci0: AHCI v1.30 with 30 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
ahcich6: <AHCI channel> at channel 6 on ahci0
ahcich7: <AHCI channel> at channel 7 on ahci0
ahcich8: <AHCI channel> at channel 8 on ahci0
ahcich9: <AHCI channel> at channel 9 on ahci0
ahcich10: <AHCI channel> at channel 10 on ahci0
ahcich11: <AHCI channel> at channel 11 on ahci0
ahcich12: <AHCI channel> at channel 12 on ahci0
ahcich13: <AHCI channel> at channel 13 on ahci0
ahcich14: <AHCI channel> at channel 14 on ahci0
ahcich15: <AHCI channel> at channel 15 on ahci0
ahcich16: <AHCI channel> at channel 16 on ahci0
ahcich17: <AHCI channel> at channel 17 on ahci0
ahcich18: <AHCI channel> at channel 18 on ahci0
ahcich19: <AHCI channel> at channel 19 on ahci0
ahcich20: <AHCI channel> at channel 20 on ahci0
ahcich21: <AHCI channel> at channel 21 on ahci0
ahcich22: <AHCI channel> at channel 22 on ahci0
ahcich23: <AHCI channel> at channel 23 on ahci0
ahcich24: <AHCI channel> at channel 24 on ahci0
ahcich25: <AHCI channel> at channel 25 on ahci0
ahcich26: <AHCI channel> at channel 26 on ahci0
ahcich27: <AHCI channel> at channel 27 on ahci0
ahcich28: <AHCI channel> at channel 28 on ahci0
ahcich29: <AHCI channel> at channel 29 on ahci0
pcib2: <PCI-PCI bridge> at device 21.0 on pci0
pci2: <PCI bus> on pcib2
pvscsi0: <VMware Paravirtual SCSI Controller> mem 0x3f900000-0x3f907fff at device 0.0 on pci2
pvscsi0: Interrupt: MSI-X
pvscsi0: Use Msg: 1
pvscsi0: REQ num pages: 32
pvscsi0: CMP num pages: 32
pvscsi0: MSG num pages: 1
pvscsi0: Queue size: 1024
pvscsi0: Adapter Reset
pcib3: <PCI-PCI bridge> at device 21.1 on pci0
pcib4: <PCI-PCI bridge> at device 21.2 on pci0
pcib5: <PCI-PCI bridge> at device 21.3 on pci0
pcib6: <PCI-PCI bridge> at device 21.4 on pci0
pcib7: <PCI-PCI bridge> at device 21.5 on pci0
pcib8: <PCI-PCI bridge> at device 21.6 on pci0
pcib9: <PCI-PCI bridge> at device 21.7 on pci0
pcib10: <PCI-PCI bridge> at device 22.0 on pci0
pci3: <PCI bus> on pcib10
vmx0: <VMware VMXNET3 Ethernet Adapter> mem 0x3f803000-0x3f803fff,0x3f802000-0x3f802fff,0x3f800000-0x3f801fff at device 0.0 on pci3
vmx0: Using 512 TX descriptors and 512 RX descriptors
vmx0: Using 4 RX queues 4 TX queues
vmx0: Using MSI-X interrupts with 5 vectors
vmx0: Ethernet address: xx:xx:xx:xx:xx:xx
pcib11: <PCI-PCI bridge> at device 22.1 on pci0
pcib12: <PCI-PCI bridge> at device 22.2 on pci0
pcib13: <PCI-PCI bridge> at device 22.3 on pci0
pcib14: <PCI-PCI bridge> at device 22.4 on pci0
pcib15: <PCI-PCI bridge> at device 22.5 on pci0
pcib16: <PCI-PCI bridge> at device 22.6 on pci0
pcib17: <PCI-PCI bridge> at device 22.7 on pci0
pcib18: <PCI-PCI bridge> at device 23.0 on pci0
pcib19: <PCI-PCI bridge> at device 23.1 on pci0
pcib20: <PCI-PCI bridge> at device 23.2 on pci0
pcib21: <PCI-PCI bridge> at device 23.3 on pci0
pcib22: <PCI-PCI bridge> at device 23.4 on pci0
pcib23: <PCI-PCI bridge> at device 23.5 on pci0
pcib24: <PCI-PCI bridge> at device 23.6 on pci0
pcib25: <PCI-PCI bridge> at device 23.7 on pci0
pcib26: <PCI-PCI bridge> at device 24.0 on pci0
pcib27: <PCI-PCI bridge> at device 24.1 on pci0
pcib28: <PCI-PCI bridge> at device 24.2 on pci0
pcib29: <PCI-PCI bridge> at device 24.3 on pci0
pcib30: <PCI-PCI bridge> at device 24.4 on pci0
pcib31: <PCI-PCI bridge> at device 24.5 on pci0
pcib32: <PCI-PCI bridge> at device 24.6 on pci0
pcib33: <PCI-PCI bridge> at device 24.7 on pci0
uart0: <16550 or compatible> mem 0x3fff03f8-0x3fff03ff irq 5 on ofwbus0
uart0: console (230400,n,8,1)
uart1: <16550 or compatible> mem 0x3fff02f8-0x3fff02ff irq 6 on ofwbus0
cryptosoft0: <software crypto>
Timecounters tick every 1.000 msec
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 480Mbps High Speed USB v2.0
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
ugen1.1: <(0x15ad) EHCI root HUB> at usbus1
uhub0 on usbus1
uhub0: <(0x15ad) EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
ugen0.1: <(0x15ad) UHCI root HUB> at usbus0
uhub1 on usbus0
uhub1: <(0x15ad) UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
Release APs...done
Trying to mount root from zfs:zroot/ROOT/default []...
Root mount waiting for: usbus0 usbus1 CAM
CPU  0: ARM Cortex-A72 r0p3 affinity:  0
                   Cache Type = <64 byte D-cacheline,64 byte I-cacheline,PIPT ICache,64 byte ERG,64 byte CWG>
 Instruction Set Attributes 0 = <CRC32>
 Instruction Set Attributes 1 = <>
         Processor Features 0 = <AdvSIMD,FP,EL3 32,EL2 32,EL1 32,EL0 32>
         Processor Features 1 = <>
      Memory Model Features 0 = <TGran4,TGran64,SNSMem,BigEnd,16bit ASID,4TB PA>
      Memory Model Features 1 = <8bit VMID>
      Memory Model Features 2 = <32bit CCIDX,48bit VA>
             Debug Features 0 = <2 CTX BKPTs,2 Watchpoints,2 Breakpoints,Debugv8>
             Debug Features 1 = <>
         Auxiliary Features 0 = <>
         Auxiliary Features 1 = <>
CPU  1: ARM Cortex-A72 r0p3 affinity:  1
CPU  2: ARM Cortex-A72 r0p3 affinity:  2
CPU  3: ARM Cortex-A72 r0p3 affinity:  3
WARNING: WITNESS option enabled, expect reduced performance.
uhub1: 2 ports with 2 removable, self powered
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <VMware Virtual SATA Hard Drive 00000001> ATA-6 SATA 2.x device
ada0: Serial Number xxxxxxxx
ada0: 600.000MB/s transfers (SATA 3.x, UDMA5, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 40960MB (83886080 512 byte sectors)
da0 at pvscsi0 bus 0 scbus30 target 0 lun 0
da0: <VMware Virtual disk 2.0> Fixed Direct Access SPC-4 SCSI device
da0: 4294901.760MB/s transfers
da0: Command Queueing enabled
da0: 40960MB (83886080 512 byte sectors)
da0: quirks=0x140<RETRY_BUSY,STRICT_UNMAP>
cd0 at ahcich1 bus 0 scbus1 target 0 lun 0
cd0: <NECVMWar VMware SATA CD01 1.00> Removable CD-ROM SCSI device
cd0: Serial Number xxxxxxxx
cd0: 600.000MB/s transfers (SATA 3.x, UDMA2, ATAPI 12bytes, PIO 8192bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present
ugen0.2: <VMware VMware Virtual USB Mouse> at usbus0
ums0 on uhub1
ums0: <VMware> on usbus0
ums0: 16 buttons and [XYZT] coordinates ID=0
Root mount waiting for: usbus0 usbus1
ugen0.3: <VMware, Inc. VMware Virtual USB Hub> at usbus0
uhub2 on uhub1
uhub2: <VMware, Inc.> on usbus0
Root mount waiting for: usbus0 usbus1
uhub0: 6 ports with 6 removable, self powered
uhub2: 7 ports with 7 removable, self powered
Root mount waiting for: usbus0
ugen0.4: <VMware VMware Virtual USB Keyboard> at usbus0
ukbd0 on uhub2
ukbd0: <VMware> on usbus0
kbd1 at ukbd0
Dual Console: Video Primary, Serial Secondary
VMware memory control driver initialized
lo0: link state changed to UP
vmx0: link state changed to UP
uhid0 on uhub1
uhid0: <VMware> on usbus0