Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2020-11-02 07:22:14
From: andreas
Description: FreeBSD/(uname -m) on (kenv smbios.system.maker) (kenv smbios.system.product)
---<<BOOT>>---
Copyright (c) 1992-2019 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 12.1-RELEASE-p10 GENERIC amd64
FreeBSD clang version 8.0.1 (tags/RELEASE_801/final 366581) (based on LLVM 8.0.1)
VT(efifb): resolution 1024x768
CPU: Intel(R) Core(TM) i3-5010U CPU @ 2.10GHz (2095.20-MHz K8-class CPU)
Origin="GenuineIntel" Id=0x306d4 Family=0x6 Model=0x3d Stepping=4
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x7ffafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
AMD Features2=0x121<LAHF,ABM,Prefetch>
Structured Extended Features=0x21c27ab<FSGSBASE,TSCADJ,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG,RDSEED,ADX,SMAP,PROCTRACE>
XSAVE Features=0x1<XSAVEOPT>
VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
TSC: P-state invariant, performance statistics
real memory = 4294967296 (4096 MB)
avail memory = 3965669376 (3781 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <INTEL NUC5i3RY>
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 hardware threads
random: unblocking device.
WARNING: Bogus Interrupt Trigger Mode. Assume CONFORMS.
WARNING: Bogus Interrupt Trigger Mode. Assume CONFORMS.
ioapic0 <Version 2.0> irqs 0-39 on motherboard
Launching APs: 1 3 2
Timecounter "TSC" frequency 2095197280 Hz quality 1000
random: entropy device external interface
kbd1 at kbdmux0
000.000023 [4335] netmap_init netmap: loaded module
[ath_hal] loaded
module_register_init: MOD_LOAD (vesa, 0xffffffff8112f0f0, 0) error 19
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
nexus0
efirtc0: <EFI Realtime Clock> on motherboard
efirtc0: registered as a time-of-day clock, resolution 1.000000s
cryptosoft0: <software crypto> on motherboard
acpi0: <INTEL> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
Event timer "HPET3" frequency 14318180 Hz quality 440
Event timer "HPET4" frequency 14318180 Hz quality 440
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
atrtc0: Warning: Couldn't map I/O.
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0x3000-0x303f mem 0xa9000000-0xa9ffffff,0xb0000000-0xbfffffff irq 16 at device 2.0 on pci0
vgapci0: Boot video device
hdac0: <Intel Broadwell HDA Controller> mem 0xaa134000-0xaa137fff irq 16 at device 3.0 on pci0
xhci0: <Broadwell Integrated PCH-LP chipset USB 3.0 controller> mem 0xaa120000-0xaa12ffff irq 21 at device 20.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
xhci0: Port routing mask set to 0xffffffff
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
pci0: <simple comms> at device 22.0 (no driver attached)
em0: <Intel(R) PRO/1000 Network Connection> port 0x3080-0x309f mem 0xaa100000-0xaa11ffff,0xaa13b000-0xaa13bfff irq 20 at device 25.0 on pci0
em0: Using 1024 TX descriptors and 1024 RX descriptors
em0: Using an MSI interrupt
em0: Ethernet address: [_MAC_XXXXXXXXXX]
em0: netmap queues/slots: TX 1/1024, RX 1/1024
hdac1: <Intel Broadwell HDA Controller> mem 0xaa130000-0xaa133fff irq 22 at device 27.0 on pci0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
pci2: <ACPI PCI bus> on pcib2
pci2: <network> at device 0.0 (no driver attached)
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xaa13a000-0xaa13a3ff irq 23 at device 29.0 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci0
usbus1: 480Mbps High Speed USB v2.0
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <AHCI SATA controller> port 0x30d0-0x30d7,0x30c0-0x30c3,0x30b0-0x30b7,0x30a0-0x30a3,0x3060-0x307f mem 0xaa139000-0xaa1397ff irq 19 at device 31.2 on pci0
ahci0: AHCI v1.30 with 4 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
acpi_button0: <Sleep Button> on acpi0
acpi_button1: <Power Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz1: <Thermal Zone> on acpi0
orm0: <ISA Option ROM> at iomem 0xd0000-0xd0fff pnpid ORM0000 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 12.
est0: <Enhanced SpeedStep Frequency Control> on cpu0
ZFS NOTICE: Prefetch is disabled by default if less than 4GB of RAM is present;
to enable, add "vfs.zfs.prefetch_disable=0" to /boot/loader.conf.
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
hdacc0: <Intel Broadwell HDA CODEC> at cad 0 on hdac0
hdaa0: <Intel Broadwell Audio Function Group> at nid 1 on hdacc0
pcm0: <Intel Broadwell (HDMI/DP 8ch)> at nid 3 on hdaa0
hdacc1: <Realtek ALC283 HDA CODEC> at cad 0 on hdac1
hdaa1: <Realtek ALC283 Audio Function Group> at nid 1 on hdacc1
pcm1: <Realtek ALC283 (Left Analog)> at nid 33 and 25 on hdaa1
ugen0.1: <0x8086 XHCI root HUB> at usbus0
ugen1.1: <Intel EHCI root HUB> at usbus1
uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <Intenso SSD Sata III Q0303B> ACS-2 ATA SATA 3.x device
ada0: [_SERIAL_NUMBER_XXXXXXXXXXXXXXXXX]
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 1024bytes)
ada0: Command Queueing enabled
ada0: 120832MB (247463936 512 byte sectors)
Trying to mount root from zfs:zroot/ROOT/nomadbsd-1.3.1 []...
Root mount waiting for: usbus1 usbus0
uhub0: 15 ports with 15 removable, self powered
uhub1: 2 ports with 2 removable, self powered
Root mount waiting for: usbus1 usbus0
ugen0.2: <vendor 0x05e3 USB2.0 Hub> at usbus0
uhub2 on uhub0
uhub2: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/32.98, addr 1> on usbus0
uhub2: MTT enabled
ugen1.2: <vendor 0x8087 product 0x8001> at usbus1
uhub3 on uhub1
uhub3: <vendor 0x8087 product 0x8001, class 9/0, rev 2.00/0.03, addr 2> on usbus1
Root mount waiting for: usbus1 usbus0
uhub2: 4 ports with 4 removable, self powered
uhub3: 8 ports with 8 removable, self powered
ugen0.3: <Fujitsu Fujitsu Keyboard> at usbus0
ukbd0 on uhub2
ukbd0: <Fujitsu Fujitsu Keyboard, class 0/0, rev 1.10/1.09, addr 2> on usbus0
kbd2 at ukbd0
Root mount waiting for: usbus0
ugen0.4: <Logitech USB Laser Mouse> at usbus0
ums0 on uhub2
ums0: <Logitech USB Laser Mouse, class 0/0, rev 2.00/34.00, addr 3> on usbus0
ums0: 8 buttons and [XYZT] coordinates ID=0
Root mount waiting for: usbus0
usb_alloc_device: set address 5 failed (USB_ERR_TIMEOUT, ignored)
Root mount waiting for: usbus0
usbd_setup_device_desc: getting device descriptor at addr 5 failed, USB_ERR_TIMEOUT
Root mount waiting for: usbus0
usbd_req_re_enumerate: addr=5, set address failed! (USB_ERR_TIMEOUT, ignored)
usbd_setup_device_desc: getting device descriptor at addr 5 failed, USB_ERR_TIMEOUT
Root mount waiting for: usbus0
Root mount waiting for: usbus0
usbd_req_re_enumerate: addr=5, set address failed! (USB_ERR_TIMEOUT, ignored)
usbd_setup_device_desc: getting device descriptor at addr 5 failed, USB_ERR_TIMEOUT
Root mount waiting for: usbus0
Root mount waiting for: usbus0
usbd_req_re_enumerate: addr=5, set address failed! (USB_ERR_TIMEOUT, ignored)
usbd_setup_device_desc: getting device descriptor at addr 5 failed, USB_ERR_TIMEOUT
Root mount waiting for: usbus0
Root mount waiting for: usbus0
usbd_req_re_enumerate: addr=5, set address failed! (USB_ERR_TIMEOUT, ignored)
usbd_setup_device_desc: getting device descriptor at addr 5 failed, USB_ERR_TIMEOUT
ugen0.5: <Unknown > at usbus0 (disconnected)
uhub_reattach_port: could not allocate new device
acpi_video0: <ACPI video extension> on vgapci0
Cuse v0.1.36 @ /dev/cuse
lo0: link state changed to UP
em0: link state changed to UP
iwm0: <Intel(R) Dual Band Wireless AC 7265> mem 0xaa000000-0xaa001fff irq 19 at device 0.0 on pci2
iwm0: hw rev 0x210, fw ver 22.361476.0, address [_MAC_XXXXXXXXXX]
uhid0 on uhub2
uhid0: <Fujitsu Fujitsu Keyboard, class 0/0, rev 1.10/1.09, addr 2> on usbus0
wlan0: Ethernet address: [_MAC_XXXXXXXXXX]