Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2020-11-07 18:13:41
From: werner
Description: FreeBSD/amd64 on Micro-Star International Co., Ltd. MS-7C52
---<<BOOT>>--- Copyright (c) 1992-2019 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 12.1-RELEASE-p10 GENERIC amd64 FreeBSD clang version 8.0.1 (tags/RELEASE_801/final 366581) (based on LLVM 8.0.1) VT(efifb): resolution 1920x1080 CPU: AMD Ryzen 3 1300X Quad-Core Processor (3500.08-MHz K8-class CPU) Origin="AuthenticAMD" Id=0x800f11 Family=0x17 Model=0x1 Stepping=1 Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> Features2=0x7ed8320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM> AMD Features2=0x35c233ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,SKINIT,WDT,TCE,Topology,PCXC,PNXC,DBE,PL2I,MWAITX> Structured Extended Features=0x209c01a9<FSGSBASE,BMI1,AVX2,SMEP,BMI2,RDSEED,ADX,SMAP,CLFLUSHOPT,SHA> XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> AMD Extended Feature Extensions ID EBX=0x1007<CLZERO,IRPerf,XSaveErPtr> SVM: (disabled in BIOS) NP,NRIP,VClean,AFlush,DAssist,NAsids=32768 TSC: P-state invariant, performance statistics real memory = 8589934592 (8192 MB) avail memory = 8223301632 (7842 MB) Event timer "LAPIC" quality 600 ACPI APIC Table: <ALASKA A M I > FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs FreeBSD/SMP: 1 package(s) x 2 cache groups x 2 core(s) random: unblocking device. ioapic0 <Version 2.1> irqs 0-23 on motherboard ioapic1 <Version 2.1> irqs 24-55 on motherboard Launching APs: 2 3 1 Timecounter "TSC-low" frequency 1750039567 Hz quality 1000 random: entropy device external interface kbd1 at kbdmux0 000.000023 [4335] netmap_init netmap: loaded module [ath_hal] loaded module_register_init: MOD_LOAD (vesa, 0xffffffff8112f0f0, 0) error 19 random: registering fast source Intel Secure Key RNG random: fast provider: "Intel Secure Key RNG" nexus0 efirtc0: <EFI Realtime Clock> on motherboard efirtc0: registered as a time-of-day clock, resolution 1.000000s cryptosoft0: <software crypto> on motherboard acpi0: <ALASKA A M I > on motherboard acpi0: Power Button (fixed) cpu0: <ACPI CPU> on acpi0 attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0 atrtc0: registered as a time-of-day clock, resolution 1.000000s Event timer "RTC" frequency 32768 Hz quality 0 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 Event timer "HPET" frequency 14318180 Hz quality 450 Event timer "HPET1" frequency 14318180 Hz quality 450 Event timer "HPET2" frequency 14318180 Hz quality 450 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pci0: <base peripheral, IOMMU> at device 0.2 (no driver attached) pcib1: <ACPI PCI-PCI bridge> at device 1.1 on pci0 pci1: <ACPI PCI bus> on pcib1 nvme0: <Generic NVMe Device> mem 0xf7800000-0xf7803fff irq 24 at device 0.0 on pci1 pcib2: <ACPI PCI-PCI bridge> at device 1.3 on pci0 pci2: <ACPI PCI bus> on pcib2 xhci0: <XHCI (generic) USB 3.0 controller> mem 0xf76a0000-0xf76a7fff irq 32 at device 0.0 on pci2 xhci0: 32 bytes context size, 64-bit DMA usbus0 on xhci0 usbus0: 5.0Gbps Super Speed USB v3.0 ahci0: <AHCI SATA controller> mem 0xf7680000-0xf769ffff irq 33 at device 0.1 on pci2 ahci0: AHCI v1.31 with 8 6Gbps ports, Port Multiplier supported ahcich0: <AHCI channel> at channel 0 on ahci0 ahcich1: <AHCI channel> at channel 1 on ahci0 ahcich4: <AHCI channel> at channel 4 on ahci0 ahcich5: <AHCI channel> at channel 5 on ahci0 pcib3: <ACPI PCI-PCI bridge> irq 34 at device 0.2 on pci2 pci3: <ACPI PCI bus> on pcib3 pcib4: <ACPI PCI-PCI bridge> irq 32 at device 4.0 on pci3 pci4: <ACPI PCI bus> on pcib4 re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xf000-0xf0ff mem 0xf7504000-0xf7504fff,0xf7500000-0xf7503fff irq 32 at device 0.0 on pci4 re0: Using 1 MSI-X message re0: Chip rev. 0x54000000 re0: MAC rev. 0x00100000 miibus0: <MII bus> on re0 rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0 rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow re0: Using defaults for TSO: 65518/35/2048 re0: Ethernet address: [_MAC_XXXXXXXXXX] re0: netmap queues/slots: TX 1/256, RX 1/256 pcib5: <ACPI PCI-PCI bridge> irq 33 at device 5.0 on pci3 pci5: <ACPI PCI bus> on pcib5 pcib6: <ACPI PCI-PCI bridge> irq 34 at device 6.0 on pci3 pci6: <ACPI PCI bus> on pcib6 pcib7: <ACPI PCI-PCI bridge> irq 35 at device 7.0 on pci3 pci7: <ACPI PCI bus> on pcib7 pcib8: <ACPI PCI-PCI bridge> at device 3.1 on pci0 pci8: <ACPI PCI bus> on pcib8 vgapci0: <VGA-compatible display> port 0xe000-0xe07f mem 0xf6000000-0xf6ffffff,0xe8000000-0xefffffff,0xf0000000-0xf1ffffff irq 54 at device 0.0 on pci8 nvidia0: <Graphics Device> on vgapci0 vgapci0: child nvidia0 requested pci_enable_io vgapci0: child nvidia0 requested pci_enable_io vgapci0: Boot video device hdac0: <NVIDIA (0x0e0f) HDA Controller> mem 0xf7080000-0xf7083fff irq 55 at device 0.1 on pci8 pcib9: <ACPI PCI-PCI bridge> at device 7.1 on pci0 pci9: <ACPI PCI bus> on pcib9 pci9: <unknown> at device 0.0 (no driver attached) pci9: <encrypt/decrypt> at device 0.2 (no driver attached) xhci1: <AMD KERNCZ USB 3.0 controller> mem 0xf7200000-0xf72fffff irq 37 at device 0.3 on pci9 xhci1: 64 bytes context size, 64-bit DMA usbus1 on xhci1 usbus1: 5.0Gbps Super Speed USB v3.0 pcib10: <ACPI PCI-PCI bridge> at device 8.1 on pci0 pci10: <ACPI PCI bus> on pcib10 pci10: <unknown> at device 0.0 (no driver attached) ahci1: <AMD KERNCZ AHCI SATA controller> mem 0xf7708000-0xf7708fff irq 42 at device 0.2 on pci10 ahci1: AHCI v1.31 with 1 6Gbps ports, Port Multiplier supported with FBS ahcich8: <AHCI channel> at channel 0 on ahci1 hdac1: <AMD (0x1457) HDA Controller> mem 0xf7700000-0xf7707fff irq 43 at device 0.3 on pci10 isab0: <PCI-ISA bridge> at device 20.3 on pci0 isa0: <ISA bus> on isab0 acpi_button0: <Power Button> on acpi0 uart2: <16x50 with 256 byte FIFO> iomem 0xfedc9000-0xfedc9fff,0xfedc7000-0xfedc7fff irq 3 on acpi0 uart3: <16x50 with 256 byte FIFO> iomem 0xfedca000-0xfedcafff,0xfedc8000-0xfedc8fff irq 4 on acpi0 uart4: <16x50 with 256 byte FIFO> iomem 0xfedce000-0xfedcefff,0xfedcc000-0xfedccfff irq 3 on acpi0 uart5: <16x50 with 256 byte FIFO> iomem 0xfedcf000-0xfedcffff,0xfedcd000-0xfedcdfff irq 4 on acpi0 uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 12. hwpstate0: <Cool`n'Quiet 2.0> on cpu0 Timecounters tick every 1.000 msec ugen1.1: <0x1022 XHCI root HUB> at usbus1 ugen0.1: <0x1022 XHCI root HUB> at usbus0 uhub0: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1 uhub1: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 nvd0: <SPCC M.2 PCIe SSD> NVMe namespace nvd0: 244198MB (500118192 512 byte sectors) hdacc0: <NVIDIA (0x0051) HDA CODEC> at cad 0 on hdac0 hdaa0: <NVIDIA (0x0051) Audio Function Group> at nid 1 on hdacc0 pcm0: <NVIDIA (0x0051) (HDMI/DP 8ch)> at nid 4 on hdaa0 pcm1: <NVIDIA (0x0051) (HDMI/DP 8ch)> at nid 5 on hdaa0 hdacc1: <Realtek ALC892 HDA CODEC> at cad 0 on hdac1 hdaa1: <Realtek ALC892 Audio Function Group> at nid 1 on hdacc1 pcm2: <Realtek ALC892 (Rear Analog)> at nid 20 and 24,26 on hdaa1 pcm3: <Realtek ALC892 (Front Analog)> at nid 27 and 25 on hdaa1 Trying to mount root from ufs:/dev/nvd0p2 [rw]... uhub0: 8 ports with 8 removable, self powered uhub1: 22 ports with 22 removable, self powered lo0: link state changed to UP re0: link state changed to DOWN ugen0.2: <Logitech USB Receiver> at usbus0 ukbd0 on uhub1 ukbd0: <Logitech USB Receiver, class 0/0, rev 2.00/12.11, addr 1> on usbus0 kbd2 at ukbd0 ugen0.3: <Logitech USB Receiver> at usbus0 re0: link state changed to UP intsmb0: <AMD FCH SMBus Controller> at device 20.0 on pci0 smbus0: <System Management Bus> on intsmb0 ums0 on uhub1 ums0: <Logitech USB Receiver, class 0/0, rev 2.00/12.11, addr 1> on usbus0 ums0: 16 buttons and [XYZT] coordinates ID=2 uhid0 on uhub1 uhid0: <Logitech USB Receiver, class 0/0, rev 2.00/12.11, addr 1> on usbus0 ums1 on uhub1 ums1: <Logitech USB Receiver, class 0/0, rev 2.00/30.00, addr 2> on usbus0 ums1: 16 buttons and [XYZT] coordinates ID=0 uhid1 on uhub1 uhid1: <Logitech USB Receiver, class 0/0, rev 2.00/30.00, addr 2> on usbus0