Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2020-11-15 13:28:44
From: mzar
Description: ProLiant DL360 G7
---<<BOOT>>---
Copyright (c) 1992-2020 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 12.2-STABLE #10 r367700: Sun Nov 15 09:26:03 CET 2020
[_EMAIL_XXXXXXXXXXXXXXX]:/usr/obj/usr/src/amd64.amd64/sys/PROLIANT amd64
FreeBSD clang version 10.0.1 ([_EMAIL_XXXXX]:llvm/llvm-project.git llvmorg-10.0.1-0-gef32c611aa2)
VT(vga): text 80x25
CPU: Intel(R) Xeon(R) CPU E5640 @ 2.67GHz (2666.82-MHz K8-class CPU)
Origin="GenuineIntel" Id=0x206c2 Family=0x6 Model=0x2c Stepping=2
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x29ee3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,POPCNT,AESNI>
AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
AMD Features2=0x1<LAHF>
Structured Extended Features3=0x9c000000<IBPB,STIBP,L1DFL,SSBD>
VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
TSC: P-state invariant, performance statistics
real memory = 25769803776 (24576 MB)
avail memory = 24987492352 (23829 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <HP ProLiant>
FreeBSD/SMP: Multiprocessor System Detected: 16 CPUs
FreeBSD/SMP: 2 package(s) x 4 core(s) x 2 hardware threads
random: unblocking device.
Firmware Warning (ACPI): Invalid length for FADT/Pm1aControlBlock: 32, using default 16 (20200430/tbfadt-850)
Firmware Warning (ACPI): Invalid length for FADT/Pm2ControlBlock: 32, using default 8 (20200430/tbfadt-850)
ioapic1 <Version 2.0> irqs 24-47 on motherboard
ioapic0 <Version 2.0> irqs 0-23 on motherboard
Launching APs: 1 7 3 12 8 10 4 6 14 11 5 9 15 13 2
Timecounter "TSC-low" frequency 1333408046 Hz quality 1000
random: entropy device external interface
000.000017 [4336] netmap_init netmap: loaded module
[ath_hal] loaded
module_register_init: MOD_LOAD (vesa, 0xffffffff810e6d70, 0) error 19
kbd1 at kbdmux0
nexus0
vtvga0: <VT VGA driver> on motherboard
cryptosoft0: <software crypto> on motherboard
aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> on motherboard
acpi0: <HP ProLiant> on motherboard
acpi0: Power Button (fixed)
acpi0: _OSC failed: AE_BUFFER_OVERFLOW
cpu0: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 350
Event timer "HPET1" frequency 14318180 Hz quality 340
Event timer "HPET2" frequency 14318180 Hz quality 340
Event timer "HPET3" frequency 14318180 Hz quality 340
atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
apei0: <ACPI Platform Error Interface> on acpi0
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x908-0x90b on acpi0
pcib0: <ACPI Host-PCI bridge> on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
ciss0: <HP Smart Array P410i> port 0x4000-0x40ff mem 0xfbe00000-0xfbffffff,0xfbdf0000-0xfbdf0fff irq 28 at device 0.0 on pci1
ciss0: PERFORMANT Transport
pcib2: <ACPI PCI-PCI bridge> at device 2.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 3.0 on pci0
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> at device 4.0 on pci0
pci4: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> at device 5.0 on pci0
pci5: <ACPI PCI bus> on pcib5
pcib6: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pci6: <ACPI PCI bus> on pcib6
pcib7: <ACPI PCI-PCI bridge> at device 7.0 on pci0
pci7: <ACPI PCI bus> on pcib7
bce0: <HP NC382i DP Multifunction Gigabit Server Adapter (C0)> mem 0xf4000000-0xf5ffffff irq 30 at device 0.0 on pci7
miibus0: <MII bus> on bce0
brgphy0: <BCM5709 10/100/1000baseT PHY> PHY 1 on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bce0: Using defaults for TSO: 65518/35/2048
bce0: Ethernet address: [_MAC_XXXXXXXXXX]
bce0: ASIC (0x57092003); Rev (C0);
bce0: link state changed to DOWN
Bus (PCIe x4, 2.5Gbps); B/C (5.2.3); Bufs (RX:2;TX:2;PG:8); Flags (SPLT|MSI|MFW); MFW (NCSI 2.0.6)
Coal (RX:6,6,18,18; TX:20,20,80,80)
bce1: <HP NC382i DP Multifunction Gigabit Server Adapter (C0)> mem 0xf2000000-0xf3ffffff irq 37 at device 0.1 on pci7
miibus1: <MII bus> on bce1
brgphy1: <BCM5709 10/100/1000baseT PHY> PHY 1 on miibus1
brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bce1: Using defaults for TSO: 65518/35/2048
bce1: Ethernet address: [_MAC_XXXXXXXXXX]
bce1: ASIC (0x57092003);
bce1: link state changed to DOWN
Rev (C0); Bus (PCIe x4, 2.5Gbps); B/C (5.2.3); Bufs (RX:2;TX:2;PG:8); Flags (SPLT|MSI|MFW); MFW (NCSI 2.0.6)
Coal (RX:6,6,18,18; TX:20,20,80,80)
pcib8: <ACPI PCI-PCI bridge> at device 8.0 on pci0
pci8: <ACPI PCI bus> on pcib8
bce2: <HP NC382i DP Multifunction Gigabit Server Adapter (C0)> mem 0xf8000000-0xf9ffffff irq 31 at device 0.0 on pci8
miibus2: <MII bus> on bce2
brgphy2: <BCM5709 10/100/1000baseT PHY> PHY 1 on miibus2
brgphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bce2: Using defaults for TSO: 65518/35/2048
bce2: Ethernet address: [_MAC_XXXXXXXXXX]
bce2: ASIC (0x57092003); Rev (C0);
bce2: link state changed to DOWN
Bus (PCIe x4, 2.5Gbps); B/C (5.2.3); Bufs (RX:2;TX:2;PG:8); Flags (SPLT|MSI|MFW); MFW (NCSI 2.0.6)
Coal (RX:6,6,18,18; TX:20,20,80,80)
bce3: <HP NC382i DP Multifunction Gigabit Server Adapter (C0)> mem 0xf6000000-0xf7ffffff irq 39 at device 0.1 on pci8
miibus3: <MII bus> on bce3
brgphy3: <BCM5709 10/100/1000baseT PHY> PHY 1 on miibus3
brgphy3: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bce3: Using defaults for TSO: 65518/35/2048
bce3: Ethernet address: [_MAC_XXXXXXXXXX]
bce3: ASIC (0x57092003);
bce3: link state changed to DOWN
Rev (C0); Bus (PCIe x4, 2.5Gbps); B/C (5.2.3); Bufs (RX:2;TX:2;PG:8); Flags (SPLT|MSI|MFW); MFW (NCSI 2.0.6)
Coal (RX:6,6,18,18; TX:20,20,80,80)
pcib9: <ACPI PCI-PCI bridge> at device 9.0 on pci0
pci9: <ACPI PCI bus> on pcib9
pcib10: <ACPI PCI-PCI bridge> at device 10.0 on pci0
pci10: <ACPI PCI bus> on pcib10
pci0: <base peripheral, interrupt controller> at device 20.0 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 20.1 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 20.2 (no driver attached)
pcib11: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pci11: <ACPI PCI bus> on pcib11
pcib12: <ACPI PCI-PCI bridge> at device 28.4 on pci0
pci12: <ACPI PCI bus> on pcib12
uhci0: <HP iLO Standard Virtual USB controller> port 0x3c00-0x3c1f irq 17 at device 0.4 on pci12
usbus0 on uhci0
usbus0: 12Mbps Full Speed USB v1.0
uhci1: <Intel 82801JI (ICH10) USB controller USB-A> port 0x1000-0x101f irq 20 at device 29.0 on pci0
uhci1: LegSup = 0x3000
usbus1 on uhci1
usbus1: 12Mbps Full Speed USB v1.0
uhci2: <Intel 82801JI (ICH10) USB controller USB-B> port 0x1020-0x103f irq 23 at device 29.1 on pci0
usbus2 on uhci2
usbus2: 12Mbps Full Speed USB v1.0
uhci3: <Intel 82801JI (ICH10) USB controller USB-C> port 0x1040-0x105f irq 22 at device 29.2 on pci0
usbus3 on uhci3
usbus3: 12Mbps Full Speed USB v1.0
uhci4: <Intel 82801JI (ICH10) USB controller USB-F> port 0x1060-0x107f irq 23 at device 29.3 on pci0
usbus4 on uhci4
usbus4: 12Mbps Full Speed USB v1.0
ehci0: <Intel 82801JI (ICH10) USB 2.0 controller USB-A> mem 0xf1bf0000-0xf1bf03ff irq 20 at device 29.7 on pci0
usbus5: EHCI version 1.0
usbus5 on ehci0
usbus5: 480Mbps High Speed USB v2.0
pcib13: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci13: <ACPI PCI bus> on pcib13
vgapci0: <VGA-compatible display> port 0x2000-0x20ff mem 0xe8000000-0xefffffff,0xf1cf0000-0xf1cfffff irq 23 at device 3.0 on pci13
vgapci0: Boot video device
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
acpi_syscontainer0: <System Container> port 0x2e-0x2f,0x620-0x65f,0x680-0x69f,0x600-0x61f,0x660-0x67f,0x300-0x31f on acpi0
uart0: <Non-standard ns8250 class UART with FIFOs> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
ichwd0: <Intel ICH10 watchdog timer> on isa0
ichwd0: ICH WDT present but disabled in BIOS or hardware
device_attach: ichwd0 attach returned 6
ichwd0: <Intel ICH10 watchdog timer> at port 0x930-0x937,0x960-0x97f on isa0
ichwd0: ICH WDT present but disabled in BIOS or hardware
device_attach: ichwd0 attach returned 6
orm0: <ISA Option ROM> at iomem 0xc0000-0xcafff pnpid ORM0000 on isa0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff pnpid PNP0900 on isa0
uart1: <Non-standard ns8250 class UART with FIFOs> at port 0x2f8 irq 3 on isa0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
Trying to mount root from zfs:zroot/ROOT/default []...
da0 at ciss0 bus 0 scbus0 target 0 lun 0
da0: <HP RAID 0 OK> Fixed Direct Access SPC-3 SCSI device
da0: [_SERIAL_NUMBER_XXXXXXXXXXXXX]
da0: 135.168MB/s transfers
da0: Command Queueing enabled
da0: 139979MB (286677120 512 byte sectors)
da1 at ciss0 bus 0 scbus0 target 1 lun 0
da1: <HP RAID 0 OK> Fixed Direct Access SPC-3 SCSI device
da1: [_SERIAL_NUMBER_XXXXXXXXXXXXX]
da1: 135.168MB/s transfers
da1: Command Queueing enabled
da1: 139979MB (286677120 512 byte sectors)
da2 at ciss0 bus 0 scbus0 target 2 lun 0
da2: <HP RAID 0 OK> Fixed Direct Access SPC-3 SCSI device
da2: [_SERIAL_NUMBER_XXXXXXXXXXXXX]
da2: 135.168MB/s transfers
da2: Command Queueing enabled
da2: 139979MB (286677120 512 byte sectors)
TCP Hpts created 16 swi interrupt thread and bound 0
ugen1.1: <Intel UHCI root HUB> at usbus1
ugen5.1: <Intel EHCI root HUB> at usbus5
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen3.1: <Intel UHCI root HUB> at usbus3
ugen0.1: <HP UHCI root HUB> at usbus0
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
ugen2.1: <Intel UHCI root HUB> at usbus2
uhub2: <HP UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
uhub4: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5
ugen4.1: <Intel UHCI root HUB> at usbus4
uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
Root mount waiting for: usbus0 usbus1 usbus2 usbus3 usbus4 usbus5
uhub2: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub0: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
uhub5: 2 ports with 2 removable, self powered
ugen0.2: <HP Virtual Keyboard> at usbus0
ukbd0 on uhub2
ukbd0: <Virtual Keyboard > on usbus0
kbd2 at ukbd0
Root mount waiting for: usbus5
Root mount waiting for: usbus5
Root mount waiting for: usbus5
uhub4: 8 ports with 8 removable, self powered
ugen4.2: <Logitech USB Receiver> at usbus4
ukbd1 on uhub5
ukbd1: <Logitech USB Receiver, class 0/0, rev 1.10/17.21, addr 2> on usbus4
kbd3 at ukbd1