Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2020-11-17 13:54:12
From: tingo
Description: FreeBSD/amd64 on Acer Aspire X1470
---<<BOOT>>--- Copyright (c) 1992-2020 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 12.2-RELEASE r366954 GENERIC amd64 FreeBSD clang version 10.0.1 ([_EMAIL_XXXXX]:llvm/llvm-project.git llvmorg-10.0.1-0-gef32c611aa2) VT(efifb): resolution 800x600 CPU: AMD A6-3620 APU with Radeon(tm) HD Graphics (2196.05-MHz K8-class CPU) Origin="AuthenticAMD" Id=0x300f10 Family=0x12 Model=0x1 Stepping=0 Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> Features2=0x802009<SSE3,MON,CX16,POPCNT> AMD Features=0xee500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM,3DNow!+,3DNow!> AMD Features2=0x37ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT> SVM: NP,NRIP,NAsids=64 TSC: P-state invariant, performance statistics real memory = 17179869184 (16384 MB) avail memory = 16054169600 (15310 MB) Event timer "LAPIC" quality 600 ACPI APIC Table: <ACRSYS ACRPRDCT> FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs FreeBSD/SMP: 1 package(s) x 4 core(s) random: unblocking device. Firmware Warning (ACPI): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20200430/tbfadt-796) ioapic0 <Version 2.1> irqs 0-23 on motherboard Launching APs: 2 3 1 Timecounter "TSC-low" frequency 1098023386 Hz quality 800 random: entropy device external interface kbd1 at kbdmux0 000.000023 [4336] netmap_init netmap: loaded module [ath_hal] loaded module_register_init: MOD_LOAD (vesa, 0xffffffff81115e40, 0) error 19 nexus0 efirtc0: <EFI Realtime Clock> on motherboard efirtc0: registered as a time-of-day clock, resolution 1.000000s cryptosoft0: <software crypto> on motherboard acpi0: <ACRSYS ACRPRDCT> on motherboard acpi0: Power Button (fixed) unknown: I/O range not supported cpu0: <ACPI CPU> on acpi0 attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 atrtc0: registered as a time-of-day clock, resolution 1.000000s Event timer "RTC" frequency 32768 Hz quality 0 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 Event timer "HPET" frequency 14318180 Hz quality 450 Event timer "HPET1" frequency 14318180 Hz quality 450 Event timer "HPET2" frequency 14318180 Hz quality 450 Timecounter "ACPI-safe" frequency 3579545 Hz quality 850 acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 vgapci0: <VGA-compatible display> port 0xf000-0xf0ff mem 0xc0000000-0xcfffffff,0xfef00000-0xfef3ffff irq 18 at device 1.0 on pci0 vgapci0: Boot video device hdac0: <ATI (0x1714) HDA Controller> mem 0xfef44000-0xfef47fff irq 19 at device 1.1 on pci0 pcib1: <ACPI PCI-PCI bridge> irq 19 at device 7.0 on pci0 pci1: <ACPI PCI bus> on pcib1 re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xe000-0xe0ff mem 0xd0004000-0xd0004fff,0xd0000000-0xd0003fff irq 19 at device 0.0 on pci1 re0: Using 1 MSI-X message re0: Chip rev. 0x2c800000 re0: MAC rev. 0x00100000 miibus0: <MII bus> on re0 rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0 rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow re0: Using defaults for TSO: 65518/35/2048 re0: Ethernet address: [_MAC_XXXXXXXXXX] re0: netmap queues/slots: TX 1/256, RX 1/256 xhci0: <XHCI (generic) USB 3.0 controller> mem 0xfef4a000-0xfef4bfff irq 18 at device 16.0 on pci0 xhci0: 32 bytes context size, 64-bit DMA xhci0: Unable to map MSI-X table usbus0 on xhci0 usbus0: 5.0Gbps Super Speed USB v3.0 xhci1: <XHCI (generic) USB 3.0 controller> mem 0xfef48000-0xfef49fff irq 17 at device 16.1 on pci0 xhci1: 32 bytes context size, 64-bit DMA xhci1: Unable to map MSI-X table usbus1 on xhci1 usbus1: 5.0Gbps Super Speed USB v3.0 ahci0: <AMD Hudson-2 AHCI SATA controller> port 0xf140-0xf147,0xf130-0xf133,0xf120-0xf127,0xf110-0xf113,0xf100-0xf10f mem 0xfef51000-0xfef517ff irq 19 at device 17.0 on pci0 ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier supported ahcich0: <AHCI channel> at channel 0 on ahci0 ahcich1: <AHCI channel> at channel 1 on ahci0 ahcich2: <AHCI channel> at channel 2 on ahci0 ahcich3: <AHCI channel> at channel 3 on ahci0 ahcich4: <AHCI channel> at channel 4 on ahci0 ahcich5: <AHCI channel> at channel 5 on ahci0 ohci0: <AMD FCH USB Controller> mem 0xfef50000-0xfef50fff irq 18 at device 18.0 on pci0 usbus2 on ohci0 usbus2: 12Mbps Full Speed USB v1.0 ehci0: <AMD FCH USB 2.0 controller> mem 0xfef4f000-0xfef4f0ff irq 17 at device 18.2 on pci0 usbus3: EHCI version 1.0 usbus3 on ehci0 usbus3: 480Mbps High Speed USB v2.0 ohci1: <AMD FCH USB Controller> mem 0xfef4e000-0xfef4efff irq 18 at device 19.0 on pci0 usbus4 on ohci1 usbus4: 12Mbps Full Speed USB v1.0 ehci1: <AMD FCH USB 2.0 controller> mem 0xfef4d000-0xfef4d0ff irq 17 at device 19.2 on pci0 usbus5: EHCI version 1.0 usbus5 on ehci1 usbus5: 480Mbps High Speed USB v2.0 hdac1: <AMD Hudson-2 HDA Controller> mem 0xfef40000-0xfef43fff irq 16 at device 20.2 on pci0 isab0: <PCI-ISA bridge> at device 20.3 on pci0 isa0: <ISA bus> on isab0 pcib2: <ACPI PCI-PCI bridge> at device 20.4 on pci0 pci2: <ACPI PCI bus> on pcib2 ohci2: <OHCI (generic) USB controller> mem 0xfef4c000-0xfef4cfff irq 18 at device 20.5 on pci0 usbus6 on ohci2 usbus6: 12Mbps Full Speed USB v1.0 acpi_button0: <Power Button> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model IntelliMouse, device ID 3 orm0: <ISA Option ROM> at iomem 0xc0000-0xcefff pnpid ORM0000 on isa0 hwpstate0: <Cool`n'Quiet 2.0> on cpu0 Timecounters tick every 1.000 msec hdacc0: <ATI R6xx HDA CODEC> at cad 0 on hdac0 hdaa0: <ATI R6xx Audio Function Group> at nid 1 on hdacc0 pcm0: <ATI R6xx (HDMI)> at nid 3 on hdaa0 hdacc1: <Realtek ALC662 rev3 HDA CODEC> at cad 1 on hdac1 hdaa1: <Realtek ALC662 rev3 Audio Function Group> at nid 1 on hdacc1 pcm1: <Realtek ALC662 rev3 (Analog 2.0+HP/2.0)> at nid 20,27 and 24,25,26 on hdaa1 ugen0.1: <0x1022 XHCI root HUB> at usbus0 ugen5.1: <AMD EHCI root HUB> at usbus5 ugen6.1: <AMD OHCI root HUB> at usbus6 uhub0: ugen2.1: <AMD OHCI root HUB> at usbus2 <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 uhub1: <AMD OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 uhub2: <AMD OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6 uhub3: <AMD EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5 ugen3.1: <AMD EHCI root HUB> at usbus3 ugen4.1: <AMD OHCI root HUB> at usbus4 Trying to mount root from ufs:/dev/ada0p2 [rw]... Root mount waiting for: usbus0 usbus1 CAM usbus2 usbus3 usbus4 usbus5 usbus6 uhub4: <AMD EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3 uhub5: <AMD OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4 ugen1.1: <0x1022 XHCI root HUB> at usbus1 uhub6: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1 ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 ada0: <M4-CT128M4SSD2 0309> ACS-2 ATA SATA 3.x device ada0: [_SERIAL_NUMBER_XXXXXXXXXXXXXXXXX] ada0: 600.000MB/s transfers (SATA 3.x, UDMA5, PIO 8192bytes) ada0: Command Queueing enabled ada0: 122104MB (250069680 512 byte sectors) ada0: quirks=0x1<4K> cd0 at ahcich1 bus 0 scbus1 target 0 lun 0 cd0: <HL-DT-ST DVDRAM GH70N UGA0> Removable CD-ROM SCSI device cd0: [_SERIAL_NUMBER_XXXXXXXX] cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes) cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed uhub2: 2 ports with 2 removable, self powered uhub1: 5 ports with 5 removable, self powered uhub5: 5 ports with 5 removable, self powered uhub0: 4 ports with 4 removable, self powered uhub6: 4 ports with 4 removable, self powered Root mount waiting for: usbus3 usbus5 uhub3: 5 ports with 5 removable, self powered uhub4: 5 ports with 5 removable, self powered Root mount waiting for: usbus3 usbus5 ugen3.2: <Generic USB2.0-CRW> at usbus3 umass0 on uhub4 umass0: <Bulk-In, Bulk-Out, Interface> on usbus3 umass0: SCSI over Bulk-Only; quirks = 0x4000 umass0:6:0: Attached to scbus6 da0 at umass-sim0 bus 0 scbus6 target 0 lun 0 da0: <Generic- Multi-Card 1.00> Removable Direct Access SCSI device da0: [_SERIAL_NUMBER_XXXXXXXXXXXXXX] da0: 40.000MB/s transfers da0: Attempt to query device size failed: NOT READY, Medium not present da0: quirks=0x2<NO_6_BYTE> ugen4.2: <Logitech USB-PS/2 Optical Mouse> at usbus4 ugen5.2: <Generic Mass Storage> at usbus5 umass1 on uhub3 umass1: <Generic Mass Storage, class 0/0, rev 2.00/1.06, addr 2> on usbus5 umass1: SCSI over Bulk-Only; quirks = 0x4101 umass1:7:1: Attached to scbus7 Root mount waiting for: CAM da1 at umass-sim1 bus 1 scbus7 target 0 lun 0 da1: <Generic Flash Disk 8.07> Removable Direct Access SPC-2 SCSI device da1: [_SERIAL_NUMBER_XXXXX] da1: 40.000MB/s transfers da1: 7680MB (15728640 512 byte sectors) da1: quirks=0x2<NO_6_BYTE> mountroot: waiting for device /dev/ada0p2... intsmb0: <AMD FCH SMBus Controller> at device 20.0 on pci0 smbus0: <System Management Bus> on intsmb0 lo0: link state changed to UP re0: link state changed to DOWN ums0 on uhub5 ums0: <Logitech USB-PS/2 Optical Mouse, class 0/0, rev 2.00/21.00, addr 2> on usbus4 ums0: 8 buttons and [XYZ] coordinates ID=0 re0: link state changed to UP