Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2020-11-18 13:59:36
From: Yoann
Description: FreeBSD/amd64 on Hewlett-Packard HP t510 Thin Client
---<<BOOT>>--- Copyright (c) 1992-2020 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 12.2-RELEASE r366954 GENERIC amd64 FreeBSD clang version 10.0.1 ([_EMAIL_XXXXX]:llvm/llvm-project.git llvmorg-10.0.1-0-gef32c611aa2) VT(vga): resolution 640x480 CPU: VIA Eden X2 U4200 @ 1.0+ GHz (1000.06-MHz K8-class CPU) Origin="CentaurHauls" Id=0x6fd Family=0x6 Model=0xf Stepping=13 Features=0xbfc9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x8863a9<SSE3,MON,VMX,EST,TM2,SSSE3,CX16,xTPR,SSE4.1,POPCNT> AMD Features=0x20100800<SYSCALL,NX,LM> AMD Features2=0x1<LAHF> VIA Padlock Features=0x1ec33dcc<RNG,AES,AES-CTR,SHA1,SHA256,RSA> VT-x: HLT,PAUSE TSC: P-state invariant real memory = 8590983168 (8193 MB) avail memory = 7767445504 (7407 MB) Event timer "LAPIC" quality 100 ACPI APIC Table: <060313 APIC1009> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs FreeBSD/SMP: 2 package(s) x 1 core(s) random: unblocking device. ioapic0 <Version 0.3> irqs 0-23 on motherboard ioapic1 <Version 0.3> irqs 24-47 on motherboard Launching APs: 1 Timecounter "TSC" frequency 1000063460 Hz quality 800 random: entropy device external interface kbd1 at kbdmux0 000.000023 [4336] netmap_init netmap: loaded module [ath_hal] loaded module_register_init: MOD_LOAD (vesa, 0xffffffff81115e40, 0) error 19 random: registering fast source VIA Nehemiah Padlock RNG random: fast provider: "VIA Nehemiah Padlock RNG" nexus0 vtvga0: <VT VGA driver> on motherboard cryptosoft0: <software crypto> on motherboard padlock0: <AES-CBC,SHA1,SHA256> on motherboard acpi0: <060313 XSDT1009> on motherboard acpi0: Power Button (fixed) cpu0: <ACPI CPU> on acpi0 attimer0: <AT timer> port 0x40-0x43 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0 atrtc0: registered as a time-of-day clock, resolution 1.000000s Event timer "RTC" frequency 32768 Hz quality 0 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 Event timer "HPET" frequency 14318180 Hz quality 450 Event timer "HPET1" frequency 14318180 Hz quality 450 Event timer "HPET2" frequency 14318180 Hz quality 450 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 vgapci0: <VGA-compatible display> mem 0xfd000000-0xfdffffff,0xfc000000-0xfcffffff,0xf0000000-0xf7ffffff irq 40 at device 1.0 on pci0 vgapci0: Boot video device pcib1: <ACPI PCI-PCI bridge> irq 27 at device 3.0 on pci0 pci1: <ACPI PCI bus> on pcib1 pcib2: <ACPI PCI-PCI bridge> irq 31 at device 3.1 on pci0 pci2: <ACPI PCI bus> on pcib2 pcib3: <ACPI PCI-PCI bridge> irq 35 at device 3.2 on pci0 pcib3: [GIANT-LOCKED] pcib4: <ACPI PCI-PCI bridge> irq 39 at device 3.3 on pci0 pci3: <ACPI PCI bus> on pcib4 bge0: <Broadcom BCM57780 A1, ASIC rev. 0x57780001> mem 0xfebf0000-0xfebfffff irq 36 at device 0.0 on pci3 bge0: CHIP ID 0x57780001; ASIC REV 0x57780; CHIP REV 0x577800; PCI-E miibus0: <MII bus> on bge0 brgphy0: <BCM57780 1000BASE-T media interface> PHY 1 on miibus0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow bge0: Using defaults for TSO: 65518/35/2048 bge0: Ethernet address: [_MAC_XXXXXXXXXX] atapci0: <VIA VX900 SATA300 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfc00-0xfc0f at device 15.0 on pci0 ata0: <ATA channel> at channel 0 on atapci0 ata1: <ATA channel> at channel 1 on atapci0 uhci0: <VIA 83C572 USB controller> port 0xdc00-0xdc1f irq 20 at device 16.0 on pci0 uhci0: LegSup = 0xa000 usbus0 on uhci0 usbus0: 12Mbps Full Speed USB v1.0 uhci1: <VIA 83C572 USB controller> port 0xd880-0xd89f irq 22 at device 16.1 on pci0 uhci1: LegSup = 0xa000 usbus1 on uhci1 usbus1: 12Mbps Full Speed USB v1.0 uhci2: <VIA 83C572 USB controller> port 0xd800-0xd81f irq 21 at device 16.2 on pci0 uhci2: LegSup = 0xa000 usbus2 on uhci2 usbus2: 12Mbps Full Speed USB v1.0 uhci3: <VIA 83C572 USB controller> port 0xd480-0xd49f irq 23 at device 16.3 on pci0 uhci3: LegSup = 0xa000 usbus3 on uhci3 usbus3: 12Mbps Full Speed USB v1.0 ehci0: <VIA VT6202 USB 2.0 controller> mem 0xfbfefc00-0xfbfefcff irq 23 at device 16.4 on pci0 usbus4: EHCI version 1.0 usbus4 on ehci0 usbus4: 480Mbps High Speed USB v2.0 isab0: <PCI-ISA bridge> at device 17.0 on pci0 viawd0: <VIA VX900 watchdog timer> on isab0 viawd0: ERROR: watchdog rebooted the system isa0: <ISA bus> on isab0 pcib5: <ACPI PCI-PCI bridge> at device 19.0 on pci0 pci4: <ACPI PCI bus> on pcib5 hdac0: <VIA VT8251/8237A HDA Controller> mem 0xfbfe8000-0xfbfebfff irq 17 at device 20.0 on pci0 acpi_button0: <Sleep Button> on acpi0 acpi_button1: <Power Button> on acpi0 vga0: <Generic ISA VGA> at port 0x3b0-0x3bb iomem 0xb0000-0xb7fff pnpid PNP0900 on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 12. est0: <Enhanced SpeedStep Frequency Control> on cpu0 Timecounters tick every 1.000 msec hdacc0: <VIA VT1708S_0 HDA CODEC> at cad 0 on hdac0 hdaa0: <VIA VT1708S_0 Audio Function Group> at nid 1 on hdacc0 pcm0: <VIA VT1708S_0 (Rear Analog Mic)> at nid 26 on hdaa0 ugen4.1: <VIA EHCI root HUB> at usbus4 ugen3.1: <VIA UHCI root HUB> at usbus3 uhub0: <VIA EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4 uhub1: <VIA UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3 ugen1.1: <VIA UHCI root HUB> at usbus1 ugen2.1: <VIA UHCI root HUB> at usbus2 uhub2: <VIA UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 uhub3: <VIA UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 ugen0.1: <VIA UHCI root HUB> at usbus0 Trying to mount root from ufs:/dev/ada0s1a [rw]... Root mount waiting for: CAM usbus0 usbus1 usbus2 usbus3 usbus4 uhub4: <VIA UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 uhub1: 2 ports with 2 removable, self powered uhub3: 2 ports with 2 removable, self powered uhub2: 2 ports with 2 removable, self powered uhub4: 2 ports with 2 removable, self powered Root mount waiting for: CAM usbus4 ada0 at ata0 bus 0 scbus0 target 1 lun 0 ada0: <16GB SATA Flash Drive SFDDA01A> ATA8-ACS SATA 2.x device ada0: [_SERIAL_NUMBER_XXXXXXXXXXXXXXXXX] ada0: 150.000MB/s transfers (SATA 1.x, UDMA6, PIO 8192bytes) ada0: 15272MB (31277232 512 byte sectors) uhub0: 8 ports with 8 removable, self powered Root mount waiting for: usbus4 Root mount waiting for: usbus4 ugen1.2: <Logitech USB Keyboard> at usbus1 ukbd0 on uhub2 ukbd0: <USB Keyboard> on usbus1 kbd2 at ukbd0 ugen4.2: <jmicron jmicron> at usbus4 umass0 on uhub0 umass0: <jmicron jmicron, class 0/0, rev 2.10/5.08, addr 2> on usbus4 umass0: SCSI over Bulk-Only; quirks = 0x8100 umass0:2:0: Attached to scbus2 da0 at umass-sim0 bus 0 scbus2 target 0 lun 0 da0: <WDC WD75 00BPVT-22HXZT3 0508> Fixed Direct Access SPC-4 SCSI device da0: [_SERIAL_NUMBER_XXXXXXXXX] da0: 40.000MB/s transfers da0: 715404MB (1465149168 512 byte sectors) da0: quirks=0xa<NO_6_BYTE,4K> ugen1.3: <Logitech USB Optical Mouse> at usbus1 mountroot: waiting for device /dev/ada0s1a... lo0: link state changed to UP bge0: link state changed to DOWN bge0: link state changed to UP uhid0 on uhub2 uhid0: <USB Keyboard> on usbus1 ums0 on uhub2 ums0: <Logitech USB Optical Mouse, class 0/0, rev 2.00/72.00, addr 3> on usbus1 ums0: 3 buttons and [XYZ] coordinates ID=0