Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].


Date: 2020-11-30 22:01:59
From: hbent
Description: Sun Fire V120
Boot device: disk  File and args:
NetBSD IEEE 1275 Multi-FS Bootblock
Version $NetBSD: bootblk.fth,v 1.13 2010/06/24 00:54:12 eeh Exp $
>> NetBSD/sparc64 OpenFirmware Boot, Revision 1.18
=0x93cbb8
Loading netbsd: 6270224+248696+179600 [435648+282877]=0xa18790
[   1.0000000] pool redzone disabled for 'kmem-08192'
[   1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
[   1.0000000]     2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
[   1.0000000]     2018, 2019, 2020 The NetBSD Foundation, Inc.  All rights reserved.
[   1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
[   1.0000000]     The Regents of the University of California.  All rights reserved.

[   1.0000000] NetBSD 9.99.69 (OCDNS1) #1: Thu Jul 23 14:34:00 EDT 2020
[   1.0000000]  xxx@xxx.xxx:/usr/src/sys/arch/sparc64/compile/OCDNS1
[   1.0000000] total memory = 2048 MB
[   1.0000000] avail memory = 1994 MB
[   1.0000000] pool redzone disabled for 'buf64k'
[   1.0000000] entropy: no seed from bootloader
[   1.0000000] mainbus0 (root): SUNW,UltraAX-i2 (Sun Fire V120): hostid xxxxxxxx
[   1.0000000] cpu0 at mainbus0: SUNW,UltraSPARC-IIe @ 648 MHz, CPU id 0
[   1.0000000] cpu0: manuf 17, impl 13, mask 33
[   1.0000000] cpu0: system tick frequency 11.111 MHz
[   1.0000000] cpu0: 16K instruction (32 b/l), 16K data (32 b/l), 512K external (64 b/l)
[   1.0000000] psycho0 at mainbus0
[   1.0000000] psycho0: SUNW,sabre: impl 0, version 0: ign 7c0 bus range 0 to 2; PCI bus 0
[   1.0000000] psycho_alloc_extent: no "available" property
[   1.0000000] psycho_alloc_extent: no "available" property
[   1.0000000] pci0 at psycho0
[   1.0000000] ppb0 at pci0 dev 1 function 1: Sun Microsystems Simba PCI Bridge (rev. 0x13)
[   1.0000000] pci1 at ppb0 bus 1
[   1.0000000] ebus0 at pci1 dev 12 function 0: Sun Microsystems PCIO Ebus2 (US III), revision 0x01
[   1.0000000] flashprom at ebus0 addr 0-fffff not configured
[   1.0000000] clock0 at ebus0 addr 0-1fff: mk48t59
ebus_attach: idprom: incomplete
[   1.0000000] lom0 at ebus0 addr 200000-200003 ipl 2a: SUNW,lomh: LOMlite2 rev 3.12
[   1.0000000] alipm0 at pci1 dev 3 function 0: 74KHz clock
[   1.0000000] iic0 at alipm0: I2C bus
[   1.0000000] admtemp0 at iic0 addr 0x18: MAX1617A temperature sensor: id. 0x41, rev. 0x3c
[   1.0000000] spdmem0 at iic0 addr 0x54
[   1.0000000] spdmem0: SDRAM (registered), data ECC, 512MB, 133MHz (PC-133)
[   1.0000000] spdmem1 at iic0 addr 0x55
[   1.0000000] spdmem1: SDRAM (registered), data ECC, 512MB, 133MHz (PC-133)
[   1.0000000] spdmem2 at iic0 addr 0x56
[   1.0000000] spdmem2: SDRAM (registered), data ECC, 512MB, 133MHz (PC-133)
[   1.0000000] spdmem3 at iic0 addr 0x57
[   1.0000000] spdmem3: SDRAM (registered), data ECC, 512MB, 133MHz (PC-133)
[   1.0000000] seeprom0 at iic0 addr 0x50: i2c-nvram: size 8192
[   1.0000000] seeprom1 at iic0 addr 0x51: motherboard-fru: size 8192
[   1.0000000] ebus1 at pci1 dev 7 function 0: Acer Labs M1533 PCI-ISA Bridge, revision 0x00
[   1.0000000] power at ebus1 addr 800-82f ipl 25 not configured
[   1.0000000] com0 at ebus1 addr 3f8-3ff ipl 2b: ns16550a, working fifo
[   1.0000000] com0: console
[   1.0000000] com1 at ebus1 addr 2e8-2ef ipl 2b: ns16550a, working fifo
[   1.0000000] gem0 at pci1 dev 12 function 1: Sun Microsystems ERI Ethernet (rev. 0x01)
[   1.0000000] gem0: interrupting at ivec 3006
[   1.0000000] bmtphy0 at gem0 phy 1: BCM5221 10/100 media interface, rev. 4
[   1.0000000] bmtphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
[   1.0000000] gem0: Ethernet address xx:xx:xx:xx:xx:xx, 2KB RX fifo, 2KB TX fifo
[   1.0000000] ohci0 at pci1 dev 12 function 3: Sun Microsystems USB Controller (rev. 0x01)
[   1.0000000] ohci0: interrupting at ivec 24
[   1.0000000] ohci0: OHCI version 1.0, legacy support
[   1.0000000] usb0 at ohci0: USB revision 1.0
[   1.0000000] aceride0 at pci1 dev 13 function 0: Acer Labs M5229 UDMA IDE Controller (rev. 0xc3)
[   1.0000000] aceride0: using ivec 180c for native-PCI interrupt
[   1.0000000] atabus0 at aceride0 channel 0
[   1.0000000] atabus1 at aceride0 channel 1
[   1.0000000] gem1 at pci1 dev 5 function 1: Sun Microsystems ERI Ethernet (rev. 0x01)
[   1.0000000] gem1: interrupting at ivec 301c
[   1.0000000] bmtphy1 at gem1 phy 1: BCM5221 10/100 media interface, rev. 4
[   1.0000000] bmtphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
[   1.0000000] gem1: Ethernet address xx:xx:xx:xx:xx:xx, 2KB RX fifo, 2KB TX fifo
[   1.0000000] ohci1 at pci1 dev 5 function 3: Sun Microsystems USB Controller (rev. 0x01)
[   1.0000000] ohci1: interrupting at ivec 26
[   1.0000000] ohci1: OHCI version 1.0, legacy support
[   1.0000000] usb1 at ohci1: USB revision 1.0
[   1.0000000] ppb1 at pci0 dev 1 function 0: Sun Microsystems Simba PCI Bridge (rev. 0x13)
[   1.0000000] pci2 at ppb1 bus 2
[   1.0000000] esiop0 at pci2 dev 8 function 0: Symbios Logic 53c896 (ultra2-wide scsi)
[   1.0000000] esiop0: using on-board RAM
[   1.0000000] esiop0: interrupting at ivec 1820
[   1.0000000] scsibus0 at esiop0: 16 targets, 8 luns per target
[   1.0000000] esiop1 at pci2 dev 8 function 1: Symbios Logic 53c896 (ultra2-wide scsi)
[   1.0000000] esiop1: using on-board RAM
[   1.0000000] esiop1: interrupting at ivec 1820
[   1.0000000] scsibus1 at esiop1: 16 targets, 8 luns per target
[   1.0000000] pcons at mainbus0 not configured
[   1.0000000] entropy: WARNING: extracting entropy too early
[   1.0000317] No counter-timer -- using STICK at 11.111MHz as system clock.
[   1.1000116] scsibus0: waiting 2 seconds for devices to settle...
[   1.1705098] scsibus1: waiting 2 seconds for devices to settle...
[   1.2700123] uhub0 at usb0: NetBSD (0x0000) OHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1
[   1.3793678] uhub1 at usb1: NetBSD (0x0000) OHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1
[   1.5000202] aes: BearSSL aes_ct
[   1.5373658] atapibus0 at atabus0: 2 targets
[   1.6900114] cd0 at atapibus0 drive 0: <DV-28E-C, , 1.4B> cdrom removable
[   3.5000086] sd0 at scsibus0 target 0 lun 0: <FUJITSU, MAT3073N SUN72G, 0602> disk fixed
[   3.5951476] sd0: 70007 MB, 14100 cyl, 24 head, 423 sec, 512 bytes/sect x 143374738 sectors
[   3.7000104] sd0: sync (25.00ns offset 31), 16-bit (80.000MB/s) transfers, tagged queueing
[   3.8022398] sd1 at scsibus0 target 1 lun 0: <IBM, DDYS-T36950M, S80D> disk fixed
[   3.8900226] sd1: 35003 MB, 15110 cyl, 12 head, 395 sec, 512 bytes/sect x 71687340 sectors
[   4.0000093] sd1: 10980 trailing sectors not covered by disklabel
[   4.0722543] sd1: sync (25.00ns offset 31), 16-bit (80.000MB/s) transfers, tagged queueing
[   8.3100039] WARNING: 1 error while detecting hardware; check system log.
[   8.3924211] root on sd0a dumps on sd0b
[   8.4500054] /: replaying log to memory
[   8.5010074] root file system type: ffs
[   8.5518695] kern.module.path=/stand/sparc64/9.99.69/modules