Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.


Date: 2020-12-05 13:41:09
From: root
Description: FreeBSD/amd64 on Dell Inc. PowerEdge R340
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge0: Using defaults for TSO: 65518/35/2048
bge0: Ethernet address: [_MAC_XXXXXXXXXX]
bge1: <Broadcom NetXtreme Gigabit Ethernet, ASIC rev. 0x5719001> mem 0x91960000-0x9196ffff,0x91970000-0x9197ffff,0x91980000-0x9198ffff at device 0.1 on pci3
bge1: APE FW version: NCSI v1.5.12.0
bge1: CHIP ID 0x05719001; ASIC REV 0x5719; CHIP REV 0x57190; PCI-E
miibus1: <MII bus> on bge1
brgphy1: <BCM5719C 1000BASE-T media interface> PHY 2 on miibus1
brgphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge1: Using defaults for TSO: 65518/35/2048
bge1: Ethernet address: [_MAC_XXXXXXXXXX]
bge2: <Broadcom NetXtreme Gigabit Ethernet, ASIC rev. 0x5719001> mem 0x91930000-0x9193ffff,0x91940000-0x9194ffff,0x91950000-0x9195ffff at device 0.2 on pci3
bge2: APE FW version: NCSI v1.5.12.0
bge2: CHIP ID 0x05719001; ASIC REV 0x5719; CHIP REV 0x57190; PCI-E
miibus2: <MII bus> on bge2
brgphy2: <BCM5719C 1000BASE-T media interface> PHY 3 on miibus2
brgphy2:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge2: Using defaults for TSO: 65518/35/2048
bge2: Ethernet address: [_MAC_XXXXXXXXXX]
bge3: <Broadcom NetXtreme Gigabit Ethernet, ASIC rev. 0x5719001> mem 0x91900000-0x9190ffff,0x91910000-0x9191ffff,0x91920000-0x9192ffff at device 0.3 on pci3
bge3: APE FW version: NCSI v1.5.12.0
bge3: CHIP ID 0x05719001; ASIC REV 0x5719; CHIP REV 0x57190; PCI-E
miibus3: <MII bus> on bge3
brgphy3: <BCM5719C 1000BASE-T media interface> PHY 4 on miibus3
brgphy3:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge3: Using defaults for TSO: 65518/35/2048
bge3: Ethernet address: [_MAC_XXXXXXXXXX]
pcib4: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pci4: <ACPI PCI bus> on pcib4
pcib5: <PCI-PCI bridge> at device 0.0 on pci4
pci5: <PCI bus> on pcib5
vgapci0: <VGA-compatible display> mem 0x90000000-0x90ffffff,0x91808000-0x9180bfff,0x91000000-0x917fffff at device 0.0 on pci5
vgapci0: Boot video device
pcib6: <ACPI PCI-PCI bridge> at device 28.1 on pci0
pci6: <ACPI PCI bus> on pcib6
bge4: <Broadcom NetXtreme Gigabit Ethernet, ASIC rev. 0x5720000> mem 0x91a30000-0x91a3ffff,0x91a40000-0x91a4ffff,0x91a50000-0x91a5ffff at device 0.0 on pci6
bge4: APE FW version: NCSI v1.5.12.0
bge4: CHIP ID 0x05720000; ASIC REV 0x5720; CHIP REV 0x57200; PCI-E
miibus4: <MII bus> on bge4
brgphy4: <BCM5720C 1000BASE-T media interface> PHY 1 on miibus4
brgphy4:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge4: Using defaults for TSO: 65518/35/2048
bge4: Ethernet address: [_MAC_XXXXXXXXXX]
bge5: <Broadcom NetXtreme Gigabit Ethernet, ASIC rev. 0x5720000> mem 0x91a00000-0x91a0ffff,0x91a10000-0x91a1ffff,0x91a20000-0x91a2ffff at device 0.1 on pci6
bge5: APE FW version: NCSI v1.5.12.0
bge5: CHIP ID 0x05720000; ASIC REV 0x5720; CHIP REV 0x57200; PCI-E
miibus5: <MII bus> on bge5
brgphy5: <BCM5720C 1000BASE-T media interface> PHY 2 on miibus5
brgphy5:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge5: Using defaults for TSO: 65518/35/2048
bge5: Ethernet address: [_MAC_XXXXXXXXXX]
pci0: <simple comms> at device 30.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus> at device 31.5 (no driver attached)
acpi_button0: <Sleep Button> on acpi0
acpi_acad0: <AC Adapter> on acpi0
acpi_button1: <Power Button> on acpi0
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
orm0: <ISA Option ROM> at iomem 0xed800-0xf17ff pnpid ORM0000 on isa0
vga0: <Generic ISA VGA> at port 0x3d0-0x3db iomem 0xb8000-0xbffff pnpid PNP0900 on isa0
atrtc0: <AT realtime clock> at port 0x70 irq 8 on isa0
atrtc0: Warning: Couldn't map I/O.
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
atrtc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 12.
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 2c7e00002c00
device_attach: est0 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 2c8100002c00
device_attach: est1 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 2c7f00002c00
device_attach: est2 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 2c7e00002c00
device_attach: est3 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 2c7f00002c00
device_attach: est4 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 2c7f00002c00
device_attach: est5 attach returned 6
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
mfisyspd0 on mfi0
mfisyspd0: 953869MB (1953525168 sectors) SYSPD volume (deviceid: 0)
mfisyspd0:  SYSPD volume attached
ugen0.1: <0x8086 XHCI root HUB> at usbus0
mfisyspd1 on mfi0
mfisyspd1: 953869MB (1953525168 sectors) SYSPD volume (deviceid: 1)
mfisyspd1:  SYSPD volume attached
mfi0: 24537 (boot + 25s/0x0002/info) - Inserted: PD 20(c None/p1) Info: enclPd=20, scsiType=d, portMap=00, sasAddr=60402000e5ad7b00,uhub0: 0000000000000000
mfi0: 24538 (boot + 25s/0x0002/info) - Inserted: PD 00(e0x20/s0)
<0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
mfi0: 24539 (boot + 25s/0x0002/info) - Inserted: PD 00(e0x20/s0) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=4433221106000000,0000000000000000
mfi0: 24540 (boot + 25s/0x0002/WARN) - PD 00(e0x20/s0) is not a certified drive
mfi0: 24541 (boot + 25s/0x0002/info) - Inserted: PD 01(e0x20/s1)
Trying to mount root from zfs:zroot/ROOT/default []...
mfi0: 24542 (boot + 25s/0x0002/info) - Inserted: PD 01(e0x20/s1) Info: enclPd=20, scsiType=0, portMap=01, sasAddr=4433221107000000,0000000000000000
mfi0: 24543 (boot + 25s/0x0002/WARN) - PD 01(e0x20/s1) is not a certified drive
mfi0: 24544 (boot + 25s/0x0020/info) - Controller operating temperature within normal range, full operation restored
mfi0: 24545 (658849179s/0x0020/info) - Time established as 11/16/20 13:39:39; (25 seconds since power on)
mfi0: 24546 (658849217s/0x0020/info) - Host driver is loaded and operational
Root mount waiting for: usbus0
Root mount waiting for: usbus0
uhub0: 26 ports with 26 removable, self powered
ugen0.2: <vendor 0x1604 product 0x10c0> at usbus0
uhub1 on uhub0
uhub1: <vendor 0x1604 product 0x10c0, class 9/0, rev 2.00/0.00, addr 1> on usbus0
Root mount waiting for: usbus0
Root mount waiting for: usbus0
Root mount waiting for: usbus0
uhub1: 4 ports with 4 removable, self powered
ugen0.3: <vendor 0x1604 product 0x10c0> at usbus0
uhub2 on uhub1
uhub2: <vendor 0x1604 product 0x10c0, class 9/0, rev 2.00/0.00, addr 2> on usbus0
Root mount waiting for: usbus0
Root mount waiting for: usbus0
Root mount waiting for: usbus0
uhub2: 4 ports with 4 removable, self powered
ugen0.4: <vendor 0x1604 product 0x10c0> at usbus0
uhub3 on uhub1
uhub3: <vendor 0x1604 product 0x10c0, class 9/0, rev 2.00/0.00, addr 3> on usbus0
Root mount waiting for: usbus0
Root mount waiting for: usbus0
Root mount waiting for: usbus0
uhub3: 4 ports with 4 removable, self powered
ugen0.5: <vendor 0x13ba Generic USB K/B> at usbus0
ukbd0 on uhub0
ukbd0: <vendor 0x13ba Generic USB K/B, class 0/0, rev 1.10/0.01, addr 4> on usbus0
kbd1 at ukbd0
lo0: link state changed to UP
bge0: link state changed to DOWN
ums0 on uhub0
ums0: <vendor 0x13ba Generic USB K/B, class 0/0, rev 1.10/0.01, addr 4> on usbus0
ums0: 3 buttons and [XYZ] coordinates ID=1
bge0: link state changed to UP
vlan69: link state changed to UP
vlan8: link state changed to UP
mfi0: 24547 (659242800s/0x0020/info) - Patrol Read can't be started, as PDs are either not ONLINE, or are in a VD with an active process, or are in an excluded VD
Waiting (max 60 seconds) for system process `vnlru' to stop... done
Waiting (max 60 seconds) for system process `syncer' to stop... 
Syncing disks, vnodes remaining... 0 0 0 0 0 done
Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done
Waiting (max 60 seconds) for system thread `bufspacedaemon-2' to stop... done
Waiting (max 60 seconds) for system thread `bufspacedaemon-3' to stop... done
Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done
Waiting (max 60 seconds) for system thread `bufspacedaemon-1' to stop... done
Waiting (max 60 seconds) for system thread `bufspacedaemon-4' to stop... done
Waiting (max 60 seconds) for system thread `bufspacedaemon-5' to stop... done
Waiting (max 60 seconds) for system thread `bufspacedaemon-6' to stop... done
All buffers synced.
Uptime: 18d23h54m16s
---<<BOOT>>---
Copyright (c) 1992-2019 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 12.1-RELEASE-p11 GENERIC amd64
FreeBSD clang version 8.0.1 (tags/RELEASE_801/final 366581) (based on LLVM 8.0.1)
VT(efifb): resolution 1024x768
CPU: Intel(R) Xeon(R) E-2226G CPU @ 3.40GHz (3408.30-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x906ea  Family=0x6  Model=0x9e  Stepping=10
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
  AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
  AMD Features2=0x121<LAHF,ABM,Prefetch>
  Structured Extended Features=0x29c6fbb<FSGSBASE,TSCADJ,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE>
  Structured Extended Features3=0x9c002600<MD_CLEAR,TSXFA,IBPB,STIBP,L1DFL,SSBD>
  XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
  VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
  TSC: P-state invariant, performance statistics
real memory  = 17179869184 (16384 MB)
avail memory = 16290631680 (15535 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <DELL   PE_SC3  >
FreeBSD/SMP: Multiprocessor System Detected: 6 CPUs
FreeBSD/SMP: 1 package(s) x 6 core(s)
random: unblocking device.
ioapic0 <Version 2.0> irqs 0-119 on motherboard
Launching APs: 1 3 2 5 4
Timecounter "TSC-low" frequency 1704151115 Hz quality 1000
random: entropy device external interface
kbd0 at kbdmux0
000.000023 [4335] netmap_init               netmap: loaded module
[ath_hal] loaded
module_register_init: MOD_LOAD (vesa, 0xffffffff8112f0f0, 0) error 19
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
nexus0
efirtc0: <EFI Realtime Clock> on motherboard
efirtc0: registered as a time-of-day clock, resolution 1.000000s
cryptosoft0: <software crypto> on motherboard
acpi0: <DELL PE_SC3> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 24000000 Hz quality 950
Event timer "HPET" frequency 24000000 Hz quality 550
Event timer "HPET1" frequency 24000000 Hz quality 440
Event timer "HPET2" frequency 24000000 Hz quality 440
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x508-0x50b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 1.1 on pci0
pci2: <ACPI PCI bus> on pcib2
AVAGO MegaRAID SAS FreeBSD mrsas driver version:[_IP_XXXXXXX]-fbsd
mfi0: <Fury> port 0x2000-0x20ff mem 0x91c00000-0x91c0ffff,0x91b00000-0x91bfffff at device 0.0 on pci2
mfi0: Using MSI
mfi0: Megaraid SAS driver Ver 4.23 
mfi0: FW MaxCmds = 240, limiting to 128
mfi0: MaxCmd = 240, Drv MaxCmd = 128, MaxSgl = 70, state = 0xb73c00f0
mfi0: 24548 (660490621s/0x0020/info) - Shutdown command received from host
mfi0: 24549 (boot + 6s/0x0020/info) - Firmware initialization started (PCI ID 005f/1000/1f44/1028)
mfi0: 24550 (boot + 6s/0x0020/info) - Firmware version 4.300.01-8365
mfi0: 24551 (boot + 8s/0x0020/info) - Package version[_IP_XXXXX]5
mfi0: 24552 (boot + 8s/0x0020/info) - Board Revision A04
mfi0: 24553 (boot + 25s/0x0004/info) - Enclosure PD 20(c None/p1) communication restored
mfi0: 24554 (boot + 25s/0x0002/info) - Inserted: Encl PD 20
xhci0: <Intel Cannon Lake USB 3.1 controller> mem 0x91d00000-0x91d0ffff at device 20.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
pci0: <memory, RAM> at device 20.2 (no driver attached)
pci0: <simple comms> at device 22.0 (no driver attached)
pci0: <simple comms> at device 22.4 (no driver attached)
ahci0: <Intel Cannon Lake AHCI SATA controller> port 0x3040-0x3047,0x3048-0x304b,0x3020-0x303f mem 0x91d12000-0x91d13fff,0x91d1d000-0x91d1d0ff,0x91d1c000-0x91d1c7ff at device 23.0 on pci0
ahci0: AHCI v1.31 with 8 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
ahciem0: <AHCI enclosure management bridge> at channel 2147483647 on ahci0
device_attach: ahciem0 attach returned 6
pcib3: <ACPI PCI-PCI bridge> at device 27.0 on pci0
pci3: <ACPI PCI bus> on pcib3
bge0: <Broadcom NetXtreme Gigabit Ethernet, ASIC rev. 0x5719001> mem 0x91990000-0x9199ffff,0x919a0000-0x919affff,0x919b0000-0x919bffff at device 0.0 on pci3
bge0: APE FW version: NCSI v1.5.12.0
bge0: CHIP ID 0x05719001; ASIC REV 0x5719; CHIP REV 0x57190; PCI-E
miibus0: <MII bus> on bge0
brgphy0: <BCM5719C 1000BASE-T media interface> PHY 1 on miibus0
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge0: Using defaults for TSO: 65518/35/2048
bge0: Ethernet address: [_MAC_XXXXXXXXXX]
bge1: <Broadcom NetXtreme Gigabit Ethernet, ASIC rev. 0x5719001> mem 0x91960000-0x9196ffff,0x91970000-0x9197ffff,0x91980000-0x9198ffff at device 0.1 on pci3
bge1: APE FW version: NCSI v1.5.12.0
bge1: CHIP ID 0x05719001; ASIC REV 0x5719; CHIP REV 0x57190; PCI-E
miibus1: <MII bus> on bge1
brgphy1: <BCM5719C 1000BASE-T media interface> PHY 2 on miibus1
brgphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge1: Using defaults for TSO: 65518/35/2048
bge1: Ethernet address: [_MAC_XXXXXXXXXX]
bge2: <Broadcom NetXtreme Gigabit Ethernet, ASIC rev. 0x5719001> mem 0x91930000-0x9193ffff,0x91940000-0x9194ffff,0x91950000-0x9195ffff at device 0.2 on pci3
bge2: APE FW version: NCSI v1.5.12.0
bge2: CHIP ID 0x05719001; ASIC REV 0x5719; CHIP REV 0x57190; PCI-E
miibus2: <MII bus> on bge2
brgphy2: <BCM5719C 1000BASE-T media interface> PHY 3 on miibus2
brgphy2:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge2: Using defaults for TSO: 65518/35/2048
bge2: Ethernet address: [_MAC_XXXXXXXXXX]
bge3: <Broadcom NetXtreme Gigabit Ethernet, ASIC rev. 0x5719001> mem 0x91900000-0x9190ffff,0x91910000-0x9191ffff,0x91920000-0x9192ffff at device 0.3 on pci3
bge3: APE FW version: NCSI v1.5.12.0
bge3: CHIP ID 0x05719001; ASIC REV 0x5719; CHIP REV 0x57190; PCI-E
miibus3: <MII bus> on bge3
brgphy3: <BCM5719C 1000BASE-T media interface> PHY 4 on miibus3
brgphy3:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge3: Using defaults for TSO: 65518/35/2048
bge3: Ethernet address: [_MAC_XXXXXXXXXX]
pcib4: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pci4: <ACPI PCI bus> on pcib4
pcib5: <PCI-PCI bridge> at device 0.0 on pci4
pci5: <PCI bus> on pcib5
vgapci0: <VGA-compatible display> mem 0x90000000-0x90ffffff,0x91808000-0x9180bfff,0x91000000-0x917fffff at device 0.0 on pci5
vgapci0: Boot video device
pcib6: <ACPI PCI-PCI bridge> at device 28.1 on pci0
pci6: <ACPI PCI bus> on pcib6
bge4: <Broadcom NetXtreme Gigabit Ethernet, ASIC rev. 0x5720000> mem 0x91a30000-0x91a3ffff,0x91a40000-0x91a4ffff,0x91a50000-0x91a5ffff at device 0.0 on pci6
bge4: APE FW version: NCSI v1.5.12.0
bge4: CHIP ID 0x05720000; ASIC REV 0x5720; CHIP REV 0x57200; PCI-E
miibus4: <MII bus> on bge4
brgphy4: <BCM5720C 1000BASE-T media interface> PHY 1 on miibus4
brgphy4:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge4: Using defaults for TSO: 65518/35/2048
bge4: Ethernet address: [_MAC_XXXXXXXXXX]
bge5: <Broadcom NetXtreme Gigabit Ethernet, ASIC rev. 0x5720000> mem 0x91a00000-0x91a0ffff,0x91a10000-0x91a1ffff,0x91a20000-0x91a2ffff at device 0.1 on pci6
bge5: APE FW version: NCSI v1.5.12.0
bge5: CHIP ID 0x05720000; ASIC REV 0x5720; CHIP REV 0x57200; PCI-E
miibus5: <MII bus> on bge5
brgphy5: <BCM5720C 1000BASE-T media interface> PHY 2 on miibus5
brgphy5:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge5: Using defaults for TSO: 65518/35/2048
bge5: Ethernet address: [_MAC_XXXXXXXXXX]
pci0: <simple comms> at device 30.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus> at device 31.5 (no driver attached)
acpi_button0: <Sleep Button> on acpi0
acpi_acad0: <AC Adapter> on acpi0
acpi_button1: <Power Button> on acpi0
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
orm0: <ISA Option ROM> at iomem 0xed800-0xf17ff pnpid ORM0000 on isa0
vga0: <Generic ISA VGA> at port 0x3d0-0x3db iomem 0xb8000-0xbffff pnpid PNP0900 on isa0
atrtc0: <AT realtime clock> at port 0x70 irq 8 on isa0
atrtc0: Warning: Couldn't map I/O.
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
atrtc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 12.
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 2c7f00002c00
device_attach: est0 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 2c8400002c00
device_attach: est1 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 2c8700002c00
device_attach: est2 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 2c8800002c00
device_attach: est3 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 2c8a00002c00
device_attach: est4 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 2c7f00002c00
device_attach: est5 attach returned 6
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
mfisyspd0 on mfi0
mfisyspd0: 953869MB (1953525168 sectors) SYSPD volume (deviceid: 0)
mfisyspd0:  SYSPD volume attached
ugen0.1: <0x8086 XHCI root HUB> at usbus0
mfisyspd1 on mfi0
mfisyspd1: 953869MB (1953525168 sectors) SYSPD volume (deviceid: 1)
mfisyspd1:  SYSPD volume attached
mfi0: 24555 (boot + 25s/0x0002/info) - Inserted: PD 20(c None/p1) Info: enclPd=20, scsiType=d, portMap=00, sasAddr=60402000e5ad7b00,uhub0: 0000000000000000
mfi0: 24556 (boot + 25s/0x0002/info) - Inserted: PD 00(e0x20/s0)
<0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
Trying to mount root from zfs:zroot/ROOT/default []...
mfi0: 24557 (boot + 25s/0x0002/info) - Inserted: PD 00(e0x20/s0) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=4433221106000000,0000000000000000
mfi0: 24558 (boot + 25s/0x0002/WARN) - PD 00(e0x20/s0) is not a certified drive
mfi0: 24559 (boot + 25s/0x0002/info) - Inserted: PD 01(e0x20/s1)
mfi0: 24560 (boot + 25s/0x0002/info) - Inserted: PD 01(e0x20/s1) Info: enclPd=20, scsiType=0, portMap=01, sasAddr=4433221107000000,0000000000000000
mfi0: 24561 (boot + 25s/0x0002/WARN) - PD 01(e0x20/s1) is not a certified drive
mfi0: 24562 (boot + 25s/0x0020/info) - Controller operating temperature within normal range, full operation restored
mfi0: 24563 (660490666s/0x0020/info) - Time established as 12/05/20 13:37:46; (25 seconds since power on)
mfi0: 24564 (660490705s/0x0020/info) - Host driver is loaded and operational
Root mount waiting for: usbus0
Root mount waiting for: usbus0
uhub0: 26 ports with 26 removable, self powered
ugen0.2: <vendor 0x1604 product 0x10c0> at usbus0
uhub1 on uhub0
uhub1: <vendor 0x1604 product 0x10c0, class 9/0, rev 2.00/0.00, addr 1> on usbus0
Root mount waiting for: usbus0
Root mount waiting for: usbus0
Root mount waiting for: usbus0
uhub1: 4 ports with 4 removable, self powered
ugen0.3: <vendor 0x1604 product 0x10c0> at usbus0
uhub2 on uhub1
uhub2: <vendor 0x1604 product 0x10c0, class 9/0, rev 2.00/0.00, addr 2> on usbus0
Root mount waiting for: usbus0
Root mount waiting for: usbus0
uhub2: 4 ports with 4 removable, self powered
Root mount waiting for: usbus0
ugen0.4: <vendor 0x1604 product 0x10c0> at usbus0
uhub3 on uhub1
uhub3: <vendor 0x1604 product 0x10c0, class 9/0, rev 2.00/0.00, addr 3> on usbus0
Root mount waiting for: usbus0
Root mount waiting for: usbus0
uhub3: 4 ports with 4 removable, self powered
Root mount waiting for: usbus0
ugen0.5: <vendor 0x13ba Generic USB K/B> at usbus0
ukbd0 on uhub0
ukbd0: <vendor 0x13ba Generic USB K/B, class 0/0, rev 1.10/0.01, addr 4> on usbus0
kbd1 at ukbd0
lo0: link state changed to UP
bge0: link state changed to DOWN
ums0 on uhub0
ums0: <vendor 0x13ba Generic USB K/B, class 0/0, rev 1.10/0.01, addr 4> on usbus0
ums0: 3 buttons and [XYZ] coordinates ID=1
bge0: link state changed to UP
vlan69: link state changed to UP
vlan8: link state changed to UP