Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.


Date: 2020-12-06 23:31:12
From: k
Description: FreeBSD/amd64 on Dell Inc. PowerEdge R630
---<<BOOT>>---
Copyright (c) 1992-2019 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 12.1-RELEASE-p2 GENERIC amd64
FreeBSD clang version 8.0.1 (tags/RELEASE_801/final 366581) (based on LLVM 8.0.1)
VT(vga): resolution 640x480
CPU: Intel(R) Xeon(R) CPU E5-2680 v3 @ 2.50GHz (2500.05-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x306f2  Family=0x6  Model=0x3f  Stepping=2
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x7ffefbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
  AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
  AMD Features2=0x21<LAHF,ABM>
  Structured Extended Features=0x37ab<FSGSBASE,TSCADJ,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,PQM,NFPUSG>
  Structured Extended Features3=0x9c000400<MD_CLEAR,IBPB,STIBP,L1DFL,SSBD>
  XSAVE Features=0x1<XSAVEOPT>
  VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr
  TSC: P-state invariant, performance statistics
real memory  = 137438953472 (131072 MB)
avail memory = 133750931456 (127554 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <DELL   PE_SC3  >
FreeBSD/SMP: Multiprocessor System Detected: 48 CPUs
FreeBSD/SMP: 2 package(s) x 12 core(s) x 2 hardware threads
random: unblocking device.
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
ioapic2 <Version 2.0> irqs 48-71 on motherboard
Launching APs: 1 32 13 41 24 20 7 5 26 15 43 30 11 2 23 40 19 4 8 36 33 6 47 46 39 3 16 17 37 31 21 27 9 42 22 44 45 29 18 38 34 35 10 25 28 14 12
Timecounter "TSC-low" frequency 1250026083 Hz quality 1000
random: entropy device external interface
kbd1 at kbdmux0
000.000023 [4335] netmap_init               netmap: loaded module
[ath_hal] loaded
module_register_init: MOD_LOAD (vesa, 0xffffffff8112e0f0, 0) error 19
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
nexus0
vtvga0: <VT VGA driver> on motherboard
cryptosoft0: <software crypto> on motherboard
aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> on motherboard
acpi0: <DELL PE_SC3> on motherboard
acpi0: Power Button (fixed)
ipmi0: <IPMI System Interface> port 0xca8,0xcac irq 10 on acpi0
ipmi0: KCS mode found at io 0xca8 on acpi
cpu0: <ACPI CPU> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71,0x74-0x77 irq 8 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 350
Event timer "HPET1" frequency 14318180 Hz quality 340
Event timer "HPET2" frequency 14318180 Hz quality 340
Event timer "HPET3" frequency 14318180 Hz quality 340
Event timer "HPET4" frequency 14318180 Hz quality 340
Event timer "HPET5" frequency 14318180 Hz quality 340
Event timer "HPET6" frequency 14318180 Hz quality 340
Event timer "HPET7" frequency 14318180 Hz quality 340
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
pcib0: <ACPI Host-PCI bridge> on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <dasp, performance counters> at device 8.2 (no driver attached)
pci0: <dasp, performance counters> at device 9.2 (no driver attached)
pci0: <dasp, performance counters> at device 11.1 (no driver attached)
pci0: <dasp, performance counters> at device 11.2 (no driver attached)
pci0: <dasp, performance counters> at device 16.1 (no driver attached)
pci0: <dasp, performance counters> at device 16.6 (no driver attached)
pci0: <dasp, performance counters> at device 18.1 (no driver attached)
pci0: <dasp, performance counters> at device 18.5 (no driver attached)
pcib1: <ACPI Host-PCI bridge> on acpi0
pci1: <ACPI PCI bus> on pcib1
pci1: <dasp, performance counters> at device 8.2 (no driver attached)
pci1: <dasp, performance counters> at device 9.2 (no driver attached)
pci1: <dasp, performance counters> at device 11.1 (no driver attached)
pci1: <dasp, performance counters> at device 11.2 (no driver attached)
pci1: <dasp, performance counters> at device 16.1 (no driver attached)
pci1: <dasp, performance counters> at device 16.6 (no driver attached)
pci1: <dasp, performance counters> at device 18.1 (no driver attached)
pci1: <dasp, performance counters> at device 18.5 (no driver attached)
acpi_syscontainer0: <System Container> on acpi0
acpi_syscontainer1: <System Container> on acpi0
pcib2: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 47 at device 1.0 on pci2
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> irq 47 at device 2.0 on pci2
pci4: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> irq 47 at device 3.0 on pci2
pci5: <ACPI PCI bus> on pcib5
ix0: <Intel(R) PRO/10GbE PCI-Express Network Driver> mem 0x92000000-0x923fffff,0x92404000-0x92407fff irq 40 at device 0.0 on pci5
ix0: Using 2048 TX descriptors and 2048 RX descriptors
ix0: Using 24 RX queues 24 TX queues
ix0: Using MSI-X interrupts with 25 vectors
ix0: allocated for 24 queues
ix0: allocated for 24 rx queues
ix0: Ethernet address: [_MAC_XXXXXXXXXX]
ix0: PCI Express Bus: Speed 8.0GT/s Width x4
ix0: Error 2 setting up SR-IOV
ix0: netmap queues/slots: TX 24/2048, RX 24/2048
ix1: <Intel(R) PRO/10GbE PCI-Express Network Driver> mem 0x91c00000-0x91ffffff,0x92400000-0x92403fff irq 44 at device 0.1 on pci5
ix1: Using 2048 TX descriptors and 2048 RX descriptors
ix1: Using 24 RX queues 24 TX queues
ix1: Using MSI-X interrupts with 25 vectors
ix1: allocated for 24 queues
ix1: allocated for 24 rx queues
ix1: Ethernet address: [_MAC_XXXXXXXXXX]
ix1: PCI Express Bus: Speed 8.0GT/s Width x4
ix1: Error 2 setting up SR-IOV
ix1: netmap queues/slots: TX 24/2048, RX 24/2048
pcib6: <ACPI PCI-PCI bridge> irq 47 at device 3.1 on pci2
pci6: <ACPI PCI bus> on pcib6
igb0: <Intel(R) PRO/1000 PCI-Express Network Driver> mem 0x92580000-0x925fffff,0x92604000-0x92607fff irq 44 at device 0.0 on pci6
igb0: Using 1024 TX descriptors and 1024 RX descriptors
igb0: Using 8 RX queues 8 TX queues
igb0: Using MSI-X interrupts with 9 vectors
igb0: Ethernet address: [_MAC_XXXXXXXXXX]
igb0: netmap queues/slots: TX 8/1024, RX 8/1024
igb1: <Intel(R) PRO/1000 PCI-Express Network Driver> mem 0x92500000-0x9257ffff,0x92600000-0x92603fff irq 46 at device 0.1 on pci6
igb1: Using 1024 TX descriptors and 1024 RX descriptors
igb1: Using 8 RX queues 8 TX queues
igb1: Using MSI-X interrupts with 9 vectors
igb1: Ethernet address: [_MAC_XXXXXXXXXX]
igb1: netmap queues/slots: TX 8/1024, RX 8/1024
pcib7: <ACPI PCI-PCI bridge> irq 47 at device 3.2 on pci2
pci7: <ACPI PCI bus> on pcib7
pci2: <unknown> at device 17.0 (no driver attached)
ahci0: <Intel Wellsburg AHCI SATA controller> port 0x2078-0x207f,0x208c-0x208f,0x2070-0x2077,0x2088-0x208b,0x2040-0x205f mem 0x92701000-0x927017ff irq 16 at device 17.4 on pci2
ahci0: AHCI v1.30 with 4 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahciem0: <AHCI enclosure management bridge> at channel 2147483647 on ahci0
device_attach: ahciem0 attach returned 6
pci2: <simple comms> at device 22.0 (no driver attached)
pci2: <simple comms> at device 22.1 (no driver attached)
ehci0: <Intel Wellsburg USB 2.0 controller> mem 0x92703000-0x927033ff irq 18 at device 26.0 on pci2
usbus0: EHCI version 1.0
usbus0 on ehci0
usbus0: 480Mbps High Speed USB v2.0
pcib8: <PCI-PCI bridge> irq 16 at device 28.0 on pci2
pci8: <PCI bus> on pcib8
pcib9: <ACPI PCI-PCI bridge> irq 19 at device 28.7 on pci2
pci9: <ACPI PCI bus> on pcib9
pcib10: <PCI-PCI bridge> at device 0.0 on pci9
pci10: <PCI bus> on pcib10
pcib11: <PCI-PCI bridge> at device 0.0 on pci10
pci11: <PCI bus> on pcib11
pcib12: <PCI-PCI bridge> at device 0.0 on pci11
pci12: <PCI bus> on pcib12
vgapci0: <VGA-compatible display> mem 0x90000000-0x90ffffff,0x91800000-0x91803fff,0x91000000-0x917fffff irq 19 at device 0.0 on pci12
vgapci0: Boot video device
ehci1: <Intel Wellsburg USB 2.0 controller> mem 0x92702000-0x927023ff irq 18 at device 29.0 on pci2
usbus1: EHCI version 1.0
usbus1 on ehci1
usbus1: 480Mbps High Speed USB v2.0
isab0: <PCI-ISA bridge> at device 31.0 on pci2
isa0: <ISA bus> on isab0
ahci1: <Intel Wellsburg AHCI SATA controller> port 0x2068-0x206f,0x2084-0x2087,0x2060-0x2067,0x2080-0x2083,0x2020-0x203f mem 0x92700000-0x927007ff irq 16 at device 31.2 on pci2
ahci1: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported
ahcich4: <AHCI channel> at channel 0 on ahci1
ahcich5: <AHCI channel> at channel 1 on ahci1
ahcich6: <AHCI channel> at channel 2 on ahci1
ahcich7: <AHCI channel> at channel 3 on ahci1
ahcich8: <AHCI channel> at channel 4 on ahci1
ahcich9: <AHCI channel> at channel 5 on ahci1
ahciem1: <AHCI enclosure management bridge> at channel 2147483647 on ahci1
device_attach: ahciem1 attach returned 6
pcib13: <ACPI Host-PCI bridge> on acpi0
pci13: <ACPI PCI bus> on pcib13
pcib14: <ACPI PCI-PCI bridge> irq 71 at device 1.0 on pci13
pci14: <ACPI PCI bus> on pcib14
pcib15: <ACPI PCI-PCI bridge> irq 71 at device 3.0 on pci13
pci15: <ACPI PCI bus> on pcib15
mpr0: <Avago Technologies (LSI) SAS3008> port 0x8000-0x80ff mem 0xc8040000-0xc804ffff,0xc8000000-0xc803ffff irq 64 at device 0.0 on pci15
mpr0: Firmware:[_IP_XXXXXX], Driver:[_IP_XXXXXX]-fbsd
mpr0: IOCCapabilities: 7a85c<ScsiTaskFull,DiagTrace,SnapBuf,EEDP,TransRetry,EventReplay,MSIXIndex,HostDisc,FastPath,RDPQArray>
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: console (9600,n,8,1)
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xed800-0xf17ff pnpid ORM0000 on isa0
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
ipmi0: IPMI device rev. 1, firmware rev. 2.70, version 2.0, device support mask 0xdf
ipmi0: Number of channels 6
ipmi0: Attached watchdog
ipmi0: Establishing power cycle handler
ugen1.1: <Intel EHCI root HUB> at usbus1
ugen0.1: <Intel EHCI root HUB> at usbus0
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
uhub1: mpr0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
Found device <881<SataDev,Direct>,End Device> <6.0Gbps> handle<0x0009> enclosureHandle<0x0001> slot 3
mpr0: At enclosure level 0 and connector name (    )
mpr0: Found device <881<SataDev,Direct>,End Device> <6.0Gbps> handle<0x000b> enclosureHandle<0x0001> slot 2
mpr0: At enclosure level 0 and connector name (    )
mpr0: Found device <881<SataDev,Direct>,End Device> <6.0Gbps> handle<0x000a> enclosureHandle<0x0001> slot 0
mpr0: At enclosure level 0 and connector name (    )
mpr0: Found device <881<SataDev,Direct>,End Device> <6.0Gbps> handle<0x000d> enclosureHandle<0x0001> slot 1
mpr0: At enclosure level 0 and connector name (    )
mpr0: Found device <881<SataDev,Direct>,End Device> <6.0Gbps> handle<0x000e> enclosureHandle<0x0001> slot 7
mpr0: At enclosure level 0 and connector name (    )
mpr0: Found device <881<SataDev,Direct>,End Device> <6.0Gbps> handle<0x000c> enclosureHandle<0x0001> slot 6
uhub0: mpr0: 2 ports with 2 removable, self powered
uhub1: At enclosure level 0 and connector name (    )
mpr0: 2 ports with 2 removable, self powered
Found device <881<SataDev,Direct>,End Device> <6.0Gbps> handle<0x000f> enclosureHandle<0x0001> slot 4
mpr0: At enclosure level 0 and connector name (    )
mpr0: Found device <881<SataDev,Direct>,End Device> <6.0Gbps> handle<0x0010> enclosureHandle<0x0001> slot 5
mpr0: At enclosure level 0 and connector name (    )
da0 at mpr0 bus 0 scbus10 target 0 lun 0
da0: <ATA INTEL SSDSC2BB01 0121> Fixed Direct Access SPC-4 SCSI device
da0: [_SERIAL_NUMBER_XXXXXXXXXXXXXXX]  
da0: 600.000MB/s transfers
da0: Command Queueing enabled
da0: 1144641MB (2344225968 512 byte sectors)
da1 at mpr0 bus 0 scbus10 target 1 lun 0
da1: <ATA SSDSC2BB012T7N LT34> Fixed Direct Access SPC-4 SCSI device
da1: [_SERIAL_NUMBER_XXXXXXXXXXXXXXX]
da1: 600.000MB/s transfers
da1: Command Queueing enabled
da1: 1144641MB (2344225968 512 byte sectors)
da3 at mpr0 bus 0 scbus10 target 3 lun 0
da3: <ATA SSDSC2BB012T7N LT34> Fixed Direct Access SPC-4 SCSI device
da3: [_SERIAL_NUMBER_XXXXXXXXXXXXXXX]
da3: 600.000MB/s transfers
da3: Command Queueing enabled
da3: 1144641MB (2344225968 512 byte sectors)
da2 at mpr0 bus 0 scbus10 target 2 lun 0
da2: <ATA SSDSC2BB012T7N LT34> Fixed Direct Access SPC-4 SCSI device
da2: [_SERIAL_NUMBER_XXXXXXXXXXXXXXX]
da2: 600.000MB/s transfers
da2: Command Queueing enabled
da2: 1144641MB (2344225968 512 byte sectors)
da4 at mpr0 bus 0 scbus10 target 4 lun 0
da4: <ATA SSDSC2BB012T7N LT34> Fixed Direct Access SPC-4 SCSI device
da4: [_SERIAL_NUMBER_XXXXXXXXXXXXXXX]
da4: 600.000MB/s transfers
da4: Command Queueing enabled
da4: 1144641MB (2344225968 512 byte sectors)
da5 at mpr0 bus 0 scbus10 target 5 lun 0
da5: <ATA SSDSC2BB012T7N LT34> Fixed Direct Access SPC-4 SCSI device
da5: [_SERIAL_NUMBER_XXXXXXXXXXXXXXX]
da5: 600.000MB/s transfers
da5: Command Queueing enabled
da5: 1144641MB (2344225968 512 byte sectors)
da7 at mpr0 bus 0 scbus10 target 7 lun 0
da7: <ATA SSDSC2BB012T7N LT34> Fixed Direct Access SPC-4 SCSI device
da7: [_SERIAL_NUMBER_XXXXXXXXXXXXXXX]
da7: 600.000MB/s transfers
da7: Command Queueing enabled
da7: 1144641MB (2344225968 512 byte sectors)
da6 at mpr0 bus 0 scbus10 target 6 lun 0
da6: <ATA INTEL SSDSC2BB01 0121> Fixed Direct Access SPC-4 SCSI device
da6: [_SERIAL_NUMBER_XXXXXXXXXXXXXXX]  
da6: 600.000MB/s transfers
da6: Command Queueing enabled
da6: 1144641MB (2344225968 512 byte sectors)
Trying to mount root from zfs:rpool/ROOT/12.1-RELEASE-p2 []...
ugen1.2: <vendor 0x8087 product 0x8002> at usbus1
uhub2 on uhub0
uhub2: <vendor 0x8087 product 0x8002, class 9/0, rev 2.00/0.05, addr 2> on usbus1
ugen0.2: <vendor 0x8087 product 0x800a> at usbus0
uhub3 on uhub1
uhub3: <vendor 0x8087 product 0x800a, class 9/0, rev 2.00/0.05, addr 2> on usbus0
Root mount waiting for: usbus1 usbus0
uhub2: 8 ports with 8 removable, self powered
uhub3: 6 ports with 6 removable, self powered
ugen1.3: <Cypress PS2toUSB KBM Bridge V2.02a> at usbus1
ukbd0 on uhub2
ukbd0: <EP1 Interrupt> on usbus1
kbd2 at ukbd0
ugen0.3: <no manufacturer Gadget USB HUB> at usbus0
uhub4 on uhub3
uhub4: <no manufacturer Gadget USB HUB, class 9/0, rev 2.00/0.00, addr 3> on usbus0
Root mount waiting for: usbus0
uhub4: 6 ports with 6 removable, self powered
lo0: link state changed to UP
ix0: link state changed to UP
ix0: link state changed to DOWN
vlan900: link state changed to DOWN
ix0: link state changed to UP
vlan900: link state changed to UP
ioat0: <HSW IOAT Ch0> mem 0x3bffff1c000-0x3bffff1ffff at device 4.0 on pci2
ioat0: Capabilities: 2f7<PQ,Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break>
ioat1: <HSW IOAT Ch1> mem 0x3bffff18000-0x3bffff1bfff at device 4.1 on pci2
ioat1: Capabilities: 2f7<PQ,Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break>
ioat2: <HSW IOAT Ch2> mem 0x3bffff14000-0x3bffff17fff at device 4.2 on pci2
ioat2: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break>
ioat3: <HSW IOAT Ch3> mem 0x3bffff10000-0x3bffff13fff at device 4.3 on pci2
ioat3: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break>
ioat4: <HSW IOAT Ch4> mem 0x3bffff0c000-0x3bffff0ffff at device 4.4 on pci2
ioat4: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break>
ioat5: <HSW IOAT Ch5> mem 0x3bffff08000-0x3bffff0bfff at device 4.5 on pci2
ioat5: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break>
ioat6: <HSW IOAT Ch6> mem 0x3bffff04000-0x3bffff07fff at device 4.6 on pci2
ioat6: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break>
ioat7: <HSW IOAT Ch7> mem 0x3bffff00000-0x3bffff03fff at device 4.7 on pci2
ioat7: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break>
ioat8: <HSW IOAT Ch0> mem 0x3fffff1c000-0x3fffff1ffff at device 4.0 on pci13
ioat8: Capabilities: 2f7<PQ,Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break>
ioat9: <HSW IOAT Ch1> mem 0x3fffff18000-0x3fffff1bfff at device 4.1 on pci13
ioat9: Capabilities: 2f7<PQ,Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break>
ioat10: <HSW IOAT Ch2> mem 0x3fffff14000-0x3fffff17fff at device 4.2 on pci13
ioat10: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break>
ioat11: <HSW IOAT Ch3> mem 0x3fffff10000-0x3fffff13fff at device 4.3 on pci13
ioat11: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break>
ioat12: <HSW IOAT Ch4> mem 0x3fffff0c000-0x3fffff0ffff at device 4.4 on pci13
ioat12: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break>
ioat13: <HSW IOAT Ch5> mem 0x3fffff08000-0x3fffff0bfff at device 4.5 on pci13
ioat13: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break>
ioat14: <HSW IOAT Ch6> mem 0x3fffff04000-0x3fffff07fff at device 4.6 on pci13
ioat14: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break>
ioat15: <HSW IOAT Ch7> mem 0x3fffff00000-0x3fffff03fff at device 4.7 on pci13
ioat15: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break>
ums0 on uhub2
ums0: <EP2 Interrupt> on usbus1
ums0: 5 buttons and [XYZ] coordinates ID=1