Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2020-12-07 21:11:04
From: thalia
Description: FreeBSD/amd64 on ASUSTeK COMPUTER INC. BM1845_BM1645
---<<BOOT>>--- Copyright (c) 1992-2020 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 12.2-RELEASE r366954 GENERIC amd64 FreeBSD clang version 10.0.1 ([_EMAIL_XXXXX]:llvm/llvm-project.git llvmorg-10.0.1-0-gef32c611aa2) VT(vga): resolution 640x480 CPU: AMD A6-5400K APU with Radeon(tm) HD Graphics (3600.07-MHz K8-class CPU) Origin="AuthenticAMD" Id=0x610f01 Family=0x15 Model=0x10 Stepping=1 Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> Features2=0x3e98320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C> AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM> AMD Features2=0x1ebbfff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,XOP,SKINIT,WDT,LWP,FMA4,TCE,NodeId,TBM,Topology,PCXC,PNXC> Structured Extended Features=0x8<BMI1> SVM: NP,NRIP,VClean,AFlush,DAssist,NAsids=65536 TSC: P-state invariant, performance statistics real memory = 8589934592 (8192 MB) avail memory = 7433179136 (7088 MB) Event timer "LAPIC" quality 600 ACPI APIC Table: <ALASKA A M I> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs FreeBSD/SMP: 1 package(s) x 2 core(s) random: unblocking device. Firmware Warning (ACPI): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20200430/tbfadt-796) ioapic0 <Version 2.1> irqs 0-23 on motherboard Launching APs: 1 Timecounter "TSC-low" frequency 1800033145 Hz quality 1000 random: entropy device external interface kbd1 at kbdmux0 000.000023 [4336] netmap_init netmap: loaded module [ath_hal] loaded module_register_init: MOD_LOAD (vesa, 0xffffffff81115e40, 0) error 19 nexus0 vtvga0: <VT VGA driver> on motherboard cryptosoft0: <software crypto> on motherboard acpi0: <ALASKA A M I> on motherboard acpi0: Power Button (fixed) cpu0: <ACPI CPU> on acpi0 attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 atrtc0: registered as a time-of-day clock, resolution 1.000000s Event timer "RTC" frequency 32768 Hz quality 0 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 vgapci0: <VGA-compatible display> port 0xf000-0xf0ff mem 0xc0000000-0xcfffffff,0xfef00000-0xfef3ffff irq 17 at device 1.0 on pci0 vgapci0: Boot video device hdac0: <ATI (0x9902) HDA Controller> mem 0xfef44000-0xfef47fff irq 18 at device 1.1 on pci0 hdac0: hdac_get_capabilities: Invalid corb size (0) device_attach: hdac0 attach returned 6 xhci0: <XHCI (generic) USB 3.0 controller> mem 0xfef4a000-0xfef4bfff irq 18 at device 16.0 on pci0 xhci0: 32 bytes context size, 64-bit DMA xhci0: Unable to map MSI-X table usbus0 on xhci0 usbus0: 5.0Gbps Super Speed USB v3.0 xhci1: <XHCI (generic) USB 3.0 controller> mem 0xfef48000-0xfef49fff irq 17 at device 16.1 on pci0 xhci1: 32 bytes context size, 64-bit DMA xhci1: Unable to map MSI-X table usbus1 on xhci1 usbus1: 5.0Gbps Super Speed USB v3.0 ahci0: <AMD Hudson-2 AHCI SATA controller> port 0xf140-0xf147,0xf130-0xf133,0xf120-0xf127,0xf110-0xf113,0xf100-0xf10f mem 0xfef50000-0xfef507ff irq 19 at device 17.0 on pci0 ahci0: AHCI v1.30 with 8 6Gbps ports, Port Multiplier supported ahcich0: <AHCI channel> at channel 0 on ahci0 ahcich1: <AHCI channel> at channel 1 on ahci0 ahcich2: <AHCI channel> at channel 2 on ahci0 ahcich3: <AHCI channel> at channel 3 on ahci0 ahcich4: <AHCI channel> at channel 4 on ahci0 ahcich5: <AHCI channel> at channel 5 on ahci0 ahcich6: <AHCI channel> at channel 6 on ahci0 ahcich7: <AHCI channel> at channel 7 on ahci0 ohci0: <AMD FCH USB Controller> mem 0xfef4f000-0xfef4ffff irq 18 at device 18.0 on pci0 usbus2 on ohci0 usbus2: 12Mbps Full Speed USB v1.0 ehci0: <AMD FCH USB 2.0 controller> mem 0xfef4e000-0xfef4e0ff irq 17 at device 18.2 on pci0 usbus3: EHCI version 1.0 usbus3 on ehci0 usbus3: 480Mbps High Speed USB v2.0 ohci1: <AMD FCH USB Controller> mem 0xfef4d000-0xfef4dfff irq 18 at device 19.0 on pci0 usbus4 on ohci1 usbus4: 12Mbps Full Speed USB v1.0 ehci1: <AMD FCH USB 2.0 controller> mem 0xfef4c000-0xfef4c0ff irq 17 at device 19.2 on pci0 usbus5: EHCI version 1.0 usbus5 on ehci1 usbus5: 480Mbps High Speed USB v2.0 hdac0: <AMD Hudson-2 HDA Controller> mem 0xfef40000-0xfef43fff irq 16 at device 20.2 on pci0 isab0: <PCI-ISA bridge> at device 20.3 on pci0 isa0: <ISA bus> on isab0 pcib1: <ACPI PCI-PCI bridge> at device 20.4 on pci0 pci1: <ACPI PCI bus> on pcib1 pcib2: <ACPI PCI-PCI bridge> at device 21.0 on pci0 pci2: <ACPI PCI bus> on pcib2 pcib3: <ACPI PCI-PCI bridge> at device 21.1 on pci0 pci3: <ACPI PCI bus> on pcib3 re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xe000-0xe0ff mem 0xd0004000-0xd0004fff,0xd0000000-0xd0003fff irq 17 at device 0.0 on pci3 re0: Using 1 MSI-X message re0: Chip rev. 0x48000000 re0: MAC rev. 0x00000000 miibus0: <MII bus> on re0 rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0 rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow re0: Using defaults for TSO: 65518/35/2048 re0: Ethernet address: [_MAC_XXXXXXXXXX] re0: netmap queues/slots: TX 1/256, RX 1/256 acpi_button0: <Power Button> on acpi0 uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 12. hwpstate0: <Cool`n'Quiet 2.0> on cpu0 ZFS filesystem version: 5 ZFS storage pool version: features support (5000) Timecounters tick every 1.000 msec hdacc0: <Realtek ALC887 HDA CODEC> at cad 0 on hdac0 hdaa0: <Realtek ALC887 Audio Function Group> at nid 1 on hdacc0 pcm0: <Realtek ALC887 (Rear Analog 7.1/2.0)> at nid 20,22,21,23 and 24,26 on hdaa0 pcm1: <Realtek ALC887 (Front Analog)> at nid 27 and 25 on hdaa0 pcm2: <Realtek ALC887 (Rear Digital)> at nid 30 on hdaa0 pcm3: <Realtek ALC887 (Onboard Digital)> at nid 17 on hdaa0 ugen4.1: <AMD OHCI root HUB> at usbus4 ugen5.1: <AMD EHCI root HUB> at usbus5 uhub0: <AMD OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4 uhub1: <AMD EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5 ugen2.1: <AMD OHCI root HUB> at usbus2 ugen3.1: <AMD EHCI root HUB> at usbus3 uhub2: <AMD OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 uhub3: <AMD EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3 ugen1.1: <0x1022 XHCI root HUB> at usbus1 ugen0.1: <0x1022 XHCI root HUB> at usbus0 uhub4: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1 Trying to mount root from zfs:zroot/ROOT/default []... Root mount waiting for: usbus0 usbus1 CAM usbus2 usbus3 usbus4 usbus5 uhub5: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 ada0: <KINGSTON SA400S37120G SBFKB1E1> ACS-3 ATA SATA 3.x device ada0: [_SERIAL_NUMBER_XXXXXXXXXXXXX] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) ada0: Command Queueing enabled ada0: 114473MB (234441648 512 byte sectors) ada1 at ahcich1 bus 0 scbus1 target 0 lun 0 ada1: <WDC WD40EFRX-68N32N0 82.00A82> ACS-3 ATA SATA 3.x device ada1: [_SERIAL_NUMBER_XXXXXXXXXXXX] ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) ada1: Command Queueing enabled ada1: 3815447MB (7814037168 512 byte sectors) ada1: quirks=0x1<4K> ada2 at ahcich3 bus 0 scbus3 target 0 lun 0 ada2: <WDC WD40EFRX-68N32N0 82.00A82> ACS-3 ATA SATA 3.x device ada2: [_SERIAL_NUMBER_XXXXXXXXXXXX] ada2: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) ada2: Command Queueing enabled ada2: 3815447MB (7814037168 512 byte sectors) ada2: quirks=0x1<4K> ada3 at ahcich5 bus 0 scbus5 target 0 lun 0 ada3: <WDC WD40EFRX-68N32N0 82.00A82> ACS-3 ATA SATA 3.x device ada3: [_SERIAL_NUMBER_XXXXXXXXXXXX] ada3: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) ada3: Command Queueing enabled ada3: 3815447MB (7814037168 512 byte sectors) ada3: quirks=0x1<4K> cd0 at ahcich4 bus 0 scbus4 target 0 lun 0 cd0: <HL-DT-ST BD-RE WH14NS40 1.04> Removable CD-ROM SCSI device cd0: [_SERIAL_NUMBER_XXXXXXXX] cd0: 150.000MB/s transfers (SATA 1.x, UDMA6, ATAPI 12bytes, PIO 8192bytes) cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed GEOM: ada1: corrupt or invalid GPT detected. GEOM: ada1: GPT rejected -- may not be recoverable. uhub2: 5 ports with 5 removable, self powered uhub0: 5 ports with 5 removable, self powered uhub4: 4 ports with 4 removable, self powered uhub5: 4 ports with 4 removable, self powered GEOM: ada2: corrupt or invalid GPT detected. GEOM: ada2: GPT rejected -- may not be recoverable. GEOM: ada3: corrupt or invalid GPT detected. GEOM: ada3: GPT rejected -- may not be recoverable. Root mount waiting for: usbus3 usbus5 uhub1: 5 ports with 5 removable, self powered uhub3: 5 ports with 5 removable, self powered GEOM_ELI: Device ada0p2.eli created. GEOM_ELI: Encryption: AES-XTS 128 GEOM_ELI: Crypto: software hdac1: <ATI (0x9902) HDA Controller> mem 0xfef44000-0xfef47fff irq 18 at device 1.1 on pci0 hdac1: hdac_get_capabilities: Invalid corb size (0) device_attach: hdac1 attach returned 6 intsmb0: <AMD FCH SMBus Controller> at device 20.0 on pci0 smbus0: <System Management Bus> on intsmb0 lo0: link state changed to UP re0: link state changed to DOWN Security policy loaded: MAC/ntpd (mac_ntpd) re0: link state changed to UP GEOM_ELI: Device ada1.eli created. GEOM_ELI: Encryption: AES-XTS 128 GEOM_ELI: Crypto: software GEOM_ELI: Device ada2.eli created. GEOM_ELI: Encryption: AES-XTS 128 GEOM_ELI: Crypto: software GEOM_ELI: Device ada3.eli created. GEOM_ELI: Encryption: AES-XTS 128 GEOM_ELI: Crypto: software Waiting (max 60 seconds) for system process `vnlru' to stop... done Waiting (max 60 seconds) for system process `syncer' to stop... Syncing disks, vnodes remaining... 0 0 0 0 0 done Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done Waiting (max 60 seconds) for system thread `bufspacedaemon-1' to stop... done Waiting (max 60 seconds) for system thread `bufspacedaemon-2' to stop... done All buffers synced. Uptime: 14h42m15s GEOM_ELI: Device ada0p2.eli destroyed. GEOM_ELI: Detached ada0p2.eli on last close. GEOM_ELI: Device ada1.eli destroyed. GEOM_ELI: Detached ada1.eli on last close. GEOM_ELI: Device ada2.eli destroyed. GEOM_ELI: Detached ada2.eli on last close. GEOM_ELI: Device ada3.eli destroyed. GEOM_ELI: Detached ada3.eli on last close. re0: link state changed to DOWN re0: link state changed to UP ---<<BOOT>>--- Copyright (c) 1992-2020 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 12.2-RELEASE r366954 GENERIC amd64 FreeBSD clang version 10.0.1 ([_EMAIL_XXXXX]:llvm/llvm-project.git llvmorg-10.0.1-0-gef32c611aa2) VT(vga): resolution 640x480 CPU: AMD A6-5400K APU with Radeon(tm) HD Graphics (3600.07-MHz K8-class CPU) Origin="AuthenticAMD" Id=0x610f01 Family=0x15 Model=0x10 Stepping=1 Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> Features2=0x3e98320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C> AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM> AMD Features2=0x1ebbfff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,XOP,SKINIT,WDT,LWP,FMA4,TCE,NodeId,TBM,Topology,PCXC,PNXC> Structured Extended Features=0x8<BMI1> SVM: NP,NRIP,VClean,AFlush,DAssist,NAsids=65536 TSC: P-state invariant, performance statistics real memory = 8589934592 (8192 MB) avail memory = 7433179136 (7088 MB) Event timer "LAPIC" quality 600 ACPI APIC Table: <ALASKA A M I> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs FreeBSD/SMP: 1 package(s) x 2 core(s) random: unblocking device. Firmware Warning (ACPI): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20200430/tbfadt-796) ioapic0 <Version 2.1> irqs 0-23 on motherboard Launching APs: 1 Timecounter "TSC-low" frequency 1800034822 Hz quality 1000 random: entropy device external interface kbd1 at kbdmux0 000.000023 [4336] netmap_init netmap: loaded module [ath_hal] loaded module_register_init: MOD_LOAD (vesa, 0xffffffff81115e40, 0) error 19 nexus0 vtvga0: <VT VGA driver> on motherboard cryptosoft0: <software crypto> on motherboard acpi0: <ALASKA A M I> on motherboard acpi0: Power Button (fixed) cpu0: <ACPI CPU> on acpi0 attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 atrtc0: registered as a time-of-day clock, resolution 1.000000s Event timer "RTC" frequency 32768 Hz quality 0 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 vgapci0: <VGA-compatible display> port 0xf000-0xf0ff mem 0xc0000000-0xcfffffff,0xfef00000-0xfef3ffff irq 17 at device 1.0 on pci0 vgapci0: Boot video device hdac0: <ATI (0x9902) HDA Controller> mem 0xfef44000-0xfef47fff irq 18 at device 1.1 on pci0 hdac0: hdac_get_capabilities: Invalid corb size (0) device_attach: hdac0 attach returned 6 xhci0: <XHCI (generic) USB 3.0 controller> mem 0xfef4a000-0xfef4bfff irq 18 at device 16.0 on pci0 xhci0: 32 bytes context size, 64-bit DMA xhci0: Unable to map MSI-X table usbus0 on xhci0 usbus0: 5.0Gbps Super Speed USB v3.0 xhci1: <XHCI (generic) USB 3.0 controller> mem 0xfef48000-0xfef49fff irq 17 at device 16.1 on pci0 xhci1: 32 bytes context size, 64-bit DMA xhci1: Unable to map MSI-X table usbus1 on xhci1 usbus1: 5.0Gbps Super Speed USB v3.0 ahci0: <AMD Hudson-2 AHCI SATA controller> port 0xf140-0xf147,0xf130-0xf133,0xf120-0xf127,0xf110-0xf113,0xf100-0xf10f mem 0xfef50000-0xfef507ff irq 19 at device 17.0 on pci0 ahci0: AHCI v1.30 with 8 6Gbps ports, Port Multiplier supported ahcich0: <AHCI channel> at channel 0 on ahci0 ahcich1: <AHCI channel> at channel 1 on ahci0 ahcich2: <AHCI channel> at channel 2 on ahci0 ahcich3: <AHCI channel> at channel 3 on ahci0 ahcich4: <AHCI channel> at channel 4 on ahci0 ahcich5: <AHCI channel> at channel 5 on ahci0 ahcich6: <AHCI channel> at channel 6 on ahci0 ahcich7: <AHCI channel> at channel 7 on ahci0 ohci0: <AMD FCH USB Controller> mem 0xfef4f000-0xfef4ffff irq 18 at device 18.0 on pci0 usbus2 on ohci0 usbus2: 12Mbps Full Speed USB v1.0 ehci0: <AMD FCH USB 2.0 controller> mem 0xfef4e000-0xfef4e0ff irq 17 at device 18.2 on pci0 usbus3: EHCI version 1.0 usbus3 on ehci0 usbus3: 480Mbps High Speed USB v2.0 ohci1: <AMD FCH USB Controller> mem 0xfef4d000-0xfef4dfff irq 18 at device 19.0 on pci0 usbus4 on ohci1 usbus4: 12Mbps Full Speed USB v1.0 ehci1: <AMD FCH USB 2.0 controller> mem 0xfef4c000-0xfef4c0ff irq 17 at device 19.2 on pci0 usbus5: EHCI version 1.0 usbus5 on ehci1 usbus5: 480Mbps High Speed USB v2.0 hdac0: <AMD Hudson-2 HDA Controller> mem 0xfef40000-0xfef43fff irq 16 at device 20.2 on pci0 isab0: <PCI-ISA bridge> at device 20.3 on pci0 isa0: <ISA bus> on isab0 pcib1: <ACPI PCI-PCI bridge> at device 20.4 on pci0 pci1: <ACPI PCI bus> on pcib1 pcib2: <ACPI PCI-PCI bridge> at device 21.0 on pci0 pci2: <ACPI PCI bus> on pcib2 pcib3: <ACPI PCI-PCI bridge> at device 21.1 on pci0 pci3: <ACPI PCI bus> on pcib3 re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xe000-0xe0ff mem 0xd0004000-0xd0004fff,0xd0000000-0xd0003fff irq 17 at device 0.0 on pci3 re0: Using 1 MSI-X message re0: Chip rev. 0x48000000 re0: MAC rev. 0x00000000 miibus0: <MII bus> on re0 rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0 rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow re0: Using defaults for TSO: 65518/35/2048 re0: Ethernet address: [_MAC_XXXXXXXXXX] re0: netmap queues/slots: TX 1/256, RX 1/256 acpi_button0: <Power Button> on acpi0 uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 12. hwpstate0: <Cool`n'Quiet 2.0> on cpu0 ZFS filesystem version: 5 ZFS storage pool version: features support (5000) Timecounters tick every 1.000 msec hdacc0: <Realtek ALC887 HDA CODEC> at cad 0 on hdac0 hdaa0: <Realtek ALC887 Audio Function Group> at nid 1 on hdacc0 pcm0: <Realtek ALC887 (Rear Analog 7.1/2.0)> at nid 20,22,21,23 and 24,26 on hdaa0 pcm1: <Realtek ALC887 (Front Analog)> at nid 27 and 25 on hdaa0 pcm2: <Realtek ALC887 (Rear Digital)> at nid 30 on hdaa0 pcm3: <Realtek ALC887 (Onboard Digital)> at nid 17 on hdaa0 ugen3.1: <AMD EHCI root HUB> at usbus3 ugen5.1: <AMD EHCI root HUB> at usbus5 uhub0: <AMD EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3 uhub1: <AMD EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5 ugen1.1: <0x1022 XHCI root HUB> at usbus1 ugen4.1: <AMD OHCI root HUB> at usbus4 uhub2: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1 uhub3: <AMD OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4 ugen2.1: <AMD OHCI root HUB> at usbus2 ugen0.1: <0x1022 XHCI root HUB> at usbus0 uhub4: <AMD OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 Trying to mount root from zfs:zroot/ROOT/default []... Root mount waiting for: usbus0 usbus1 CAM usbus2 usbus3 usbus4 usbus5 uhub5: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 ada0: <KINGSTON SA400S37120G SBFKB1E1> ACS-3 ATA SATA 3.x device ada0: [_SERIAL_NUMBER_XXXXXXXXXXXXX] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) ada0: Command Queueing enabled ada0: 114473MB (234441648 512 byte sectors) ada1 at ahcich1 bus 0 scbus1 target 0 lun 0 ada1: <WDC WD40EFRX-68N32N0 82.00A82> ACS-3 ATA SATA 3.x device ada1: [_SERIAL_NUMBER_XXXXXXXXXXXX] ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) ada1: Command Queueing enabled ada1: 3815447MB (7814037168 512 byte sectors) ada1: quirks=0x1<4K> ada2 at ahcich3 bus 0 scbus3 target 0 lun 0 ada2: <WDC WD40EFRX-68N32N0 82.00A82> ACS-3 ATA SATA 3.x device ada2: [_SERIAL_NUMBER_XXXXXXXXXXXX] ada2: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) ada2: Command Queueing enabled ada2: 3815447MB (7814037168 512 byte sectors) ada2: quirks=0x1<4K> ada3 at ahcich5 bus 0 scbus5 target 0 lun 0 ada3: <WDC WD40EFRX-68N32N0 82.00A82> ACS-3 ATA SATA 3.x device ada3: [_SERIAL_NUMBER_XXXXXXXXXXXX] ada3: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) ada3: Command Queueing enabled ada3: 3815447MB (7814037168 512 byte sectors) ada3: quirks=0x1<4K> cd0 at ahcich4 bus 0 scbus4 target 0 lun 0 cd0: <HL-DT-ST BD-RE WH14NS40 1.04> Removable CD-ROM SCSI device cd0: [_SERIAL_NUMBER_XXXXXXXX] cd0: 150.000MB/s transfers (SATA 1.x, UDMA6, ATAPI 12bytes, PIO 8192bytes) cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed GEOM: ada1: corrupt or invalid GPT detected. GEOM: ada1: GPT rejected -- may not be recoverable. uhub4: 5 ports with 5 removable, self powered uhub3: 5 ports with 5 removable, self powered uhub2: 4 ports with 4 removable, self powered uhub5: 4 ports with 4 removable, self powered GEOM: ada2: corrupt or invalid GPT detected. GEOM: ada2: GPT rejected -- may not be recoverable. GEOM: ada3: corrupt or invalid GPT detected. GEOM: ada3: GPT rejected -- may not be recoverable. Root mount waiting for: usbus3 usbus5 uhub1: 5 ports with 5 removable, self powered uhub0: 5 ports with 5 removable, self powered GEOM_ELI: Device ada0p2.eli created. GEOM_ELI: Encryption: AES-XTS 128 GEOM_ELI: Crypto: software hdac1: <ATI (0x9902) HDA Controller> mem 0xfef44000-0xfef47fff irq 18 at device 1.1 on pci0 hdac1: hdac_get_capabilities: Invalid corb size (0) device_attach: hdac1 attach returned 6 intsmb0: <AMD FCH SMBus Controller> at device 20.0 on pci0 smbus0: <System Management Bus> on intsmb0 lo0: link state changed to UP re0: link state changed to DOWN re0: link state changed to UP Security policy loaded: MAC/ntpd (mac_ntpd) GEOM_ELI: Device ada1.eli created. GEOM_ELI: Encryption: AES-XTS 128 GEOM_ELI: Crypto: software GEOM_ELI: Device ada2.eli created. GEOM_ELI: Encryption: AES-XTS 128 GEOM_ELI: Crypto: software GEOM_ELI: Device ada3.eli created. GEOM_ELI: Encryption: AES-XTS 128 GEOM_ELI: Crypto: software Waiting (max 60 seconds) for system process `vnlru' to stop... done Waiting (max 60 seconds) for system process `syncer' to stop... Syncing disks, vnodes remaining... 0 0 0 0 0 done Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done Waiting (max 60 seconds) for system thread `bufspacedaemon-1' to stop... done Waiting (max 60 seconds) for system thread `bufspacedaemon-2' to stop... done All buffers synced. Uptime: 5h27m19s GEOM_ELI: Device ada0p2.eli destroyed. GEOM_ELI: Detached ada0p2.eli on last close. GEOM_ELI: Device ada1.eli destroyed. GEOM_ELI: Detached ada1.eli on last close. GEOM_ELI: Device ada2.eli destroyed. GEOM_ELI: Detached ada2.eli on last close. GEOM_ELI: Device ada3.eli destroyed. GEOM_ELI: Detached ada3.eli on last close. ---<<BOOT>>--- Copyright (c) 1992-2020 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 12.2-RELEASE r366954 GENERIC amd64 FreeBSD clang version 10.0.1 ([_EMAIL_XXXXX]:llvm/llvm-project.git llvmorg-10.0.1-0-gef32c611aa2) VT(vga): resolution 640x480 CPU: AMD A6-5400K APU with Radeon(tm) HD Graphics (3600.07-MHz K8-class CPU) Origin="AuthenticAMD" Id=0x610f01 Family=0x15 Model=0x10 Stepping=1 Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> Features2=0x3e98320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C> AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM> AMD Features2=0x1ebbfff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,XOP,SKINIT,WDT,LWP,FMA4,TCE,NodeId,TBM,Topology,PCXC,PNXC> Structured Extended Features=0x8<BMI1> SVM: NP,NRIP,VClean,AFlush,DAssist,NAsids=65536 TSC: P-state invariant, performance statistics real memory = 8589934592 (8192 MB) avail memory = 7433179136 (7088 MB) Event timer "LAPIC" quality 600 ACPI APIC Table: <ALASKA A M I> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs FreeBSD/SMP: 1 package(s) x 2 core(s) random: unblocking device. Firmware Warning (ACPI): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20200430/tbfadt-796) ioapic0 <Version 2.1> irqs 0-23 on motherboard Launching APs: 1 Timecounter "TSC-low" frequency 1800036070 Hz quality 1000 random: entropy device external interface kbd1 at kbdmux0 000.000023 [4336] netmap_init netmap: loaded module [ath_hal] loaded module_register_init: MOD_LOAD (vesa, 0xffffffff81115e40, 0) error 19 nexus0 vtvga0: <VT VGA driver> on motherboard cryptosoft0: <software crypto> on motherboard acpi0: <ALASKA A M I> on motherboard acpi0: Power Button (fixed) cpu0: <ACPI CPU> on acpi0 attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 atrtc0: registered as a time-of-day clock, resolution 1.000000s Event timer "RTC" frequency 32768 Hz quality 0 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 vgapci0: <VGA-compatible display> port 0xf000-0xf0ff mem 0xc0000000-0xcfffffff,0xfef00000-0xfef3ffff irq 17 at device 1.0 on pci0 vgapci0: Boot video device hdac0: <ATI (0x9902) HDA Controller> mem 0xfef44000-0xfef47fff irq 18 at device 1.1 on pci0 hdac0: hdac_get_capabilities: Invalid corb size (0) device_attach: hdac0 attach returned 6 xhci0: <XHCI (generic) USB 3.0 controller> mem 0xfef4a000-0xfef4bfff irq 18 at device 16.0 on pci0 xhci0: 32 bytes context size, 64-bit DMA xhci0: Unable to map MSI-X table usbus0 on xhci0 usbus0: 5.0Gbps Super Speed USB v3.0 xhci1: <XHCI (generic) USB 3.0 controller> mem 0xfef48000-0xfef49fff irq 17 at device 16.1 on pci0 xhci1: 32 bytes context size, 64-bit DMA xhci1: Unable to map MSI-X table usbus1 on xhci1 usbus1: 5.0Gbps Super Speed USB v3.0 ahci0: <AMD Hudson-2 AHCI SATA controller> port 0xf140-0xf147,0xf130-0xf133,0xf120-0xf127,0xf110-0xf113,0xf100-0xf10f mem 0xfef50000-0xfef507ff irq 19 at device 17.0 on pci0 ahci0: AHCI v1.30 with 8 6Gbps ports, Port Multiplier supported ahcich0: <AHCI channel> at channel 0 on ahci0 ahcich1: <AHCI channel> at channel 1 on ahci0 ahcich2: <AHCI channel> at channel 2 on ahci0 ahcich3: <AHCI channel> at channel 3 on ahci0 ahcich4: <AHCI channel> at channel 4 on ahci0 ahcich5: <AHCI channel> at channel 5 on ahci0 ahcich6: <AHCI channel> at channel 6 on ahci0 ahcich7: <AHCI channel> at channel 7 on ahci0 ohci0: <AMD FCH USB Controller> mem 0xfef4f000-0xfef4ffff irq 18 at device 18.0 on pci0 usbus2 on ohci0 usbus2: 12Mbps Full Speed USB v1.0 ehci0: <AMD FCH USB 2.0 controller> mem 0xfef4e000-0xfef4e0ff irq 17 at device 18.2 on pci0 usbus3: EHCI version 1.0 usbus3 on ehci0 usbus3: 480Mbps High Speed USB v2.0 ohci1: <AMD FCH USB Controller> mem 0xfef4d000-0xfef4dfff irq 18 at device 19.0 on pci0 usbus4 on ohci1 usbus4: 12Mbps Full Speed USB v1.0 ehci1: <AMD FCH USB 2.0 controller> mem 0xfef4c000-0xfef4c0ff irq 17 at device 19.2 on pci0 usbus5: EHCI version 1.0 usbus5 on ehci1 usbus5: 480Mbps High Speed USB v2.0 hdac0: <AMD Hudson-2 HDA Controller> mem 0xfef40000-0xfef43fff irq 16 at device 20.2 on pci0 isab0: <PCI-ISA bridge> at device 20.3 on pci0 isa0: <ISA bus> on isab0 pcib1: <ACPI PCI-PCI bridge> at device 20.4 on pci0 pci1: <ACPI PCI bus> on pcib1 pcib2: <ACPI PCI-PCI bridge> at device 21.0 on pci0 pci2: <ACPI PCI bus> on pcib2 pcib3: <ACPI PCI-PCI bridge> at device 21.1 on pci0 pci3: <ACPI PCI bus> on pcib3 re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xe000-0xe0ff mem 0xd0004000-0xd0004fff,0xd0000000-0xd0003fff irq 17 at device 0.0 on pci3 re0: Using 1 MSI-X message re0: Chip rev. 0x48000000 re0: MAC rev. 0x00000000 miibus0: <MII bus> on re0 rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0 rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow re0: Using defaults for TSO: 65518/35/2048 re0: Ethernet address: [_MAC_XXXXXXXXXX] re0: netmap queues/slots: TX 1/256, RX 1/256 acpi_button0: <Power Button> on acpi0 uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 12. hwpstate0: <Cool`n'Quiet 2.0> on cpu0 ZFS filesystem version: 5 ZFS storage pool version: features support (5000) Timecounters tick every 1.000 msec hdacc0: <Realtek ALC887 HDA CODEC> at cad 0 on hdac0 hdaa0: <Realtek ALC887 Audio Function Group> at nid 1 on hdacc0 pcm0: <Realtek ALC887 (Rear Analog 7.1/2.0)> at nid 20,22,21,23 and 24,26 on hdaa0 pcm1: <Realtek ALC887 (Front Analog)> at nid 27 and 25 on hdaa0 pcm2: <Realtek ALC887 (Rear Digital)> at nid 30 on hdaa0 pcm3: <Realtek ALC887 (Onboard Digital)> at nid 17 on hdaa0 ugen4.1: <AMD OHCI root HUB> at usbus4 ugen5.1: <AMD EHCI root HUB> at usbus5 uhub1: <AMD EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5 uhub0: <AMD OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4 ugen3.1: <AMD EHCI root HUB> at usbus3 ugen2.1: <AMD OHCI root HUB> at usbus2 uhub2: <AMD EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3 uhub3: <AMD OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 ugen1.1: <0x1022 XHCI root HUB> at usbus1 ugen0.1: <0x1022 XHCI root HUB> at usbus0 uhub4: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1 Trying to mount root from zfs:zroot/ROOT/default []... Root mount waiting for: usbus0 usbus1 CAM usbus2 usbus3 usbus4 usbus5 uhub5: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 ada0: <KINGSTON SA400S37120G SBFKB1E1> ACS-3 ATA SATA 3.x device ada0: [_SERIAL_NUMBER_XXXXXXXXXXXXX] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) ada0: Command Queueing enabled ada0: 114473MB (234441648 512 byte sectors) ada1 at ahcich1 bus 0 scbus1 target 0 lun 0 ada1: <WDC WD40EFRX-68N32N0 82.00A82> ACS-3 ATA SATA 3.x device ada1: [_SERIAL_NUMBER_XXXXXXXXXXXX] ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) ada1: Command Queueing enabled ada1: 3815447MB (7814037168 512 byte sectors) ada1: quirks=0x1<4K> ada2 at ahcich3 bus 0 scbus3 target 0 lun 0 ada2: <WDC WD40EFRX-68N32N0 82.00A82> ACS-3 ATA SATA 3.x device ada2: [_SERIAL_NUMBER_XXXXXXXXXXXX] ada2: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) ada2: Command Queueing enabled ada2: 3815447MB (7814037168 512 byte sectors) ada2: quirks=0x1<4K> ada3 at ahcich5 bus 0 scbus5 target 0 lun 0 ada3: <WDC WD40EFRX-68N32N0 82.00A82> ACS-3 ATA SATA 3.x device ada3: [_SERIAL_NUMBER_XXXXXXXXXXXX] ada3: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) ada3: Command Queueing enabled ada3: 3815447MB (7814037168 512 byte sectors) ada3: quirks=0x1<4K> cd0 at ahcich4 bus 0 scbus4 target 0 lun 0 cd0: <HL-DT-ST BD-RE WH14NS40 1.04> Removable CD-ROM SCSI device cd0: [_SERIAL_NUMBER_XXXXXXXX] cd0: 150.000MB/s transfers (SATA 1.x, UDMA6, ATAPI 12bytes, PIO 8192bytes) cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed GEOM: ada1: corrupt or invalid GPT detected. GEOM: ada1: GPT rejected -- may not be recoverable. uhub0: 5 ports with 5 removable, self powered uhub3: 5 ports with 5 removable, self powered uhub4: 4 ports with 4 removable, self powered uhub5: 4 ports with 4 removable, self powered GEOM: ada2: corrupt or invalid GPT detected. GEOM: ada2: GPT rejected -- may not be recoverable. GEOM: ada3: corrupt or invalid GPT detected. GEOM: ada3: GPT rejected -- may not be recoverable. Root mount waiting for: usbus3 usbus5 uhub2: 5 ports with 5 removable, self powered uhub1: 5 ports with 5 removable, self powered GEOM_ELI: Device ada0p2.eli created. GEOM_ELI: Encryption: AES-XTS 128 GEOM_ELI: Crypto: software hdac1: <ATI (0x9902) HDA Controller> mem 0xfef44000-0xfef47fff irq 18 at device 1.1 on pci0 hdac1: hdac_get_capabilities: Invalid corb size (0) device_attach: hdac1 attach returned 6 intsmb0: <AMD FCH SMBus Controller> at device 20.0 on pci0 smbus0: <System Management Bus> on intsmb0 lo0: link state changed to UP re0: link state changed to DOWN