Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].


Date: 2020-12-12 16:32:16
From: janus
Description: Apple AirPort Time Capsule 5th gen (A1470)
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010, 2011, 2012
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 6.0 (build.kernel-target.conf) #0: Mon Apr 29 18:35:13 PDT 2019
	xxx@xxx.xxx:/BuildRoot/Library/Caches/com.apple.xbs/Sources/J28/AirPortFW-79100.2/Embedded/Firmware/NetBSD/Targets/J28/release/obj/build.kernel-target.conf
total memory = 256 MB
avail memory = 229 MB
timecounter: Timecounters tick every 10.000 msec
mainbus0 (root)
cpu0 at mainbus0 core 0: 1 GHz Cortex-A9 r4p0 (Cortex core)
cpu0: DC enabled IC enabled WB disabled EABT branch prediction enabled
cpu0: isar: [0]=0x101111 [1]=0x13112111 [2]=0x21232041 [3]=0x11112131, [4]=0x11142, [5]=0
cpu0: mmfr: [0]=0x100103 [1]=0x20000000 [2]=0x1230000 [3]=0x102111
cpu0: pfr: [0]=0x1231 [1]=0x11
cpu0: 32KB/32B 4-way L1 Instruction cache
cpu0: 32KB/32B 4-way write-back-locking-C L1 Data cache
cpu0: 512KB/32B 16-way write-back-locking-D L2 Unified cache
vfp0 at cpu0: NEON MPE (VFP 3.0+)
armperiph0 at mainbus0
arml2cc0 at armperiph0: ARM PL310 r3p2 L2 Cache Controller
armgic0 at armperiph0: Generic Interrupt Controller, 256 sources (245 valid)
armgic0: 32 Priorities, 224 SPIs, 5 PPIs, 16 SGIs
a9tmr0 at armperiph0: A9 Global 64-bit Timer (500 MHz)
a9tmr0: interrupting on irq 27
a9wdt0 at armperiph0: A9 Watchdog Timer, default period is 12 seconds
bcmcca0 at mainbus0: BCM53018 (Rev A0)
bcmcca0: interrupting at irq 117
com0 at bcmcca0 channel 0: ns16550a, working fifo
com0: console
com1 at bcmcca0 channel 1: ns16550a, working fifo
gpiocca0 at bcmcca0: CCA GPIOs
GPIO_interrupt_pin_ex: flipping pin 22.
Board-Revision: PVT
bcmccb0 at mainbus0
bcmpwm0 at bcmccb0
applfan0 at bcmccb0: Apple PWM Fan Driver for BCM5301x
applgpio0 at bcmccb0: GPIO-CCB
bcmmdio0 at bcmccb0: MDIO bus @ 2 MHz
bcmrng0 at bcmccb0: Random Number Generator (512 bit FIFO)
bcmi2c0 at bcmccb0
iic0 at bcmi2c0: I2C bus
seeprom0 at iic0 addr 0x50: AT24Cxx EEPROM
dsrtc0 at iic0 addr 0x68: DS1307 Real-time Clock/NVRAM
: EMC1413/EMC1414 indirect match to addr 124
emc141x0 at iic0 addr 0x7c: EMC1413/EMC1414 or compatible environmental sensor
: read control register: 0.
: PAC171X indirect match to addr 76
pac171x0 at iic0 addr 0x4c: PAC171X or compatible current sensor
: cannot get control register
accel_match ia_addr: 1e, matchAddr: 1e
accel0 at iic0 addr 0x1e: sc: 8fed3a00, tag: 8ff5eb18
accel0: Detected ST-AP338S1085A chip
accel0: SM1 running normally ...
bcmqspi0 at bcmccb0bcmeth1 at bcmccb0 port 0: Gigabit Ethernet Controller
bcmeth1: interrupting on irq 179
bcmeth1: Ethernet address xx:xx:xx:xx:xx:xx
RX TCP LRO Initialized
bcmeth0 at bcmccb0 port 2: Gigabit Ethernet Controller
bcmeth0: interrupting on irq 181
bcmeth0: Ethernet address xx:xx:xx:xx:xx:xx
bcmeth0: Configuring 2Gbps mode
RX TCP LRO Initialized
bcmpax0 at bcmccb0 port 0: PCI Express V2 1-lane RC Controller
bcmpax0: interrupting on irqs 159-164
bcmpax0: iwin[1]=0x80000001/0x80000080 iwin[2]=0x88000001/0x88000080
pci6 at bcmpax0 bus 0
pci6: memory space enabled, rd/line, rd/mult, wr/inv ok
ppb0 at pci6 dev 0 function 0: vendor 0x14e4 product 0x8019 (rev. 0x00)
ppb0: PCI Express 2.0 <Root Port of PCI-E Root Complex>
pci1 at ppb0 bus 1
pci1: memory space enabled, rd/line, wr/inv ok
bwl0 at pci1 dev 0 function 0bcmpax1 at bcmccb0 port 1: PCI Express V2 1-lane RC Controller
bcmpax1: interrupting on irqs 165-170
bcmpax1: iwin[1]=0x80000001/0x80000080 iwin[2]=0x88000001/0x88000080
pci7 at bcmpax1 bus 0
pci7: memory space enabled, rd/line, rd/mult, wr/inv ok
ppb1 at pci7 dev 0 function 0: vendor 0x14e4 product 0x8019 (rev. 0x00)
ppb1: PCI Express 2.0 <Root Port of PCI-E Root Complex>
pci3 at ppb1 bus 1
pci3: memory space enabled, rd/line, wr/inv ok
bwl1 at pci3 dev 0 function 0bcmpax2 at bcmccb0 port 2: PCI Express V2 1-lane RC Controller
bcmpax2: interrupting on irqs 171-176
bcmpax2: iwin[1]=0x80000001/0x80000080 iwin[2]=0x88000001/0x88000080
pci8 at bcmpax2 bus 0
pci8: memory space enabled, rd/line, rd/mult, wr/inv ok
ppb2 at pci8 dev 0 function 0: vendor 0x14e4 product 0x8019 (rev. 0x00)
ppb2: PCI Express 2.0 <Root Port of PCI-E Root Complex>
pci5 at ppb2 bus 1
pci5: memory space enabled, rd/line, wr/inv ok
ahcisata0 at pci5 dev 0 function 0: vendor 0x1b21 product 0x0611 (rev. 0x01)
ahcisata0: interrupting at bcmpax2 inta
bcmusb0 at bcmccb0
ohci0 at bcmusb0: OHCI USB controller
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
ehci0 at bcmusb0: ECHI USB controller
ehci0: EHCI version 1.0
ehci0: companion controller, 2 ports each: ohci0
usb1 at ehci0: USB revision 2.0
bcmusb0: interrupting on irq 111
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "a9tmr0" frequency 500000000 Hz quality 500
accel0: Starting task thread ...
spi0 at bcmqspi0: SPI bus
m25p0 at spi0 slave 0
spiflash0 at m25p0: Macronix MX25L25635 SPI flash
spiflash0: 32768 KB, 512 sectors of 64 KB each
stdflash0 at m25p0flash0 at stdflash0 00100000-00f00000, untranslated, read/write
flash1 at stdflash0 00f00000-01d00000, untranslated, read/write
flash2 at stdflash0 01d00000-02000000, translated, read/write
flash3 at stdflash0 000a0000-00100000, untranslated, read/write
flash4 at stdflash0 00000000-000a0000, untranslated, read/write
IPsec: Initialized Security Association Processing.
 femctrl from nvram not enabled. returning from here

bwl0: Broadcom BCM4360 802.11 Wireless Controller 6.30.229.2908 (r429500)
bwl0: RX TCP LRO Initialized
CLTM: registering radio 1 - bwl0
 femctrl from nvram not enabled. returning from here

bwl1: Broadcom BCM4360 802.11 Wireless Controller 6.30.229.2908 (r429500)
bwl1: RX TCP LRO Initialized
CLTM: registering radio 0 - bwl1
boot device: <unknown>
md0: internal 16384 KB image area
root on md0a dumps on md0b
root file system type: ffs
ACLTM: Initializing
ahcisata0: AHCI revision 1.20, 2 ports, 32 slots, CAP 0xeb32ffa1<SXS,CCCS,PSC,SSC,PMD,SPM,ISS=0x3=Gen3,SCLO,SAL,SSS,SSNTF,SNCQ,S64A>
atabus0 at ahcisata0 channel 0
atabus1 at ahcisata0 channel 1
WARNING: clock gained 592 days
uhub0 at usb0: Broadcom OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: Broadcom EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ahcisata0 port 0: device present, speed: 6.0Gb/s
wd0 at atabus0 drive 0
wd0: waking drive....
wd0: <WDC WD30EZRX-00MMMB0, 80.00A80EZRX-00MMMB0>
wd0: Supports variable head park wait time
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 2794 GB, 5814021 cyl, 16 head, 63 sec, 512 bytes/sect x 5860533168 sectors
wd0: SMART currently enabled, not enabling
wd0: does not support device initiaated PHY power management
wd0: Does not support FFS
wd0: Enabling HDD power control
wd0: GPT GUID: ab8ca5c0-3c85-11eb-b10d-6c709fd77779
dk0 at wd0: APconfig
dk0: 2097152 blocks at 40, type: hfs
dk1 at wd0: APswap
dk1: 2097152 blocks at 2097192, type: hfs
dk2 at wd0: APdata
dk2: 5856338784 blocks at 4194344, type: hfs
accel0: Enabling interrupts ...
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA)
CLTM: Using 2.4GHz radio bwl1
CLTM: Using 5GHz radio bwl0
jnl: journal start/end pointers reset! (jnl 0x8ea61f08; s 0x200 e 0x200)
jnl: close: flushing the buffer cache (start 0x1bc00 end 0x1ce00)
GPIO hd power down
GPIO hd power up
ppb2: PCI Express 2.0 <Root Port of PCI-E Root Complex>
ahcisata0 port 0: device present, speed: 6.0Gb/s
ahcisata0 port 0: device present, speed: 6.0Gb/s
ahcisata0: port 1 reset failed
wd0: wd_standby_timer: setting standby timer to 30
wd0: WDCC_IDLE_IMMED try count 1
wd0: SMART currently enabled, not enabling
wd0: does not support device initiaated PHY power management
wd0: Does not support FFS