Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2020-12-13 05:40:07
From: darkain
Description: FreeBSD 13.0 / Aarch64 / SolidRun HoneyComb LX2K / NXP LX2160A
---<<BOOT>>---
KDB: debugger backends: ddb
KDB: current backend: ddb
Copyright (c) 1992-2020 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 13.0-CURRENT #1 0dcd686f9-c1(master)-dirty: Wed Nov 25 16:26:14 UTC 2020
root@honeycomb-bsd:/usr/obj/usr/src/arm64.aarch64/sys/GENERIC arm64
FreeBSD clang version 11.0.0 ([_EMAIL_XXXXX]:llvm/llvm-project.git llvmorg-11.0.0-0-g176249bd673)
WARNING: WITNESS option enabled, expect reduced performance.
VT(efifb): resolution 1024x768
module firmware already present!
real memory = 16559054848 (15791 MB)
avail memory = 16113651712 (15367 MB)
Starting CPU 1 (1)
Starting CPU 2 (100)
Starting CPU 3 (101)
Starting CPU 4 (200)
Starting CPU 5 (201)
Starting CPU 6 (300)
Starting CPU 7 (301)
Starting CPU 8 (400)
Starting CPU 9 (401)
Starting CPU 10 (500)
Starting CPU 11 (501)
Starting CPU 12 (600)
Starting CPU 13 (601)
Starting CPU 14 (700)
Starting CPU 15 (701)
FreeBSD/SMP: Multiprocessor System Detected: 16 CPUs
random: unblocking device.
ACPI: IORT: Dropping unhandled type 1
ACPI: IORT: Dropping unhandled type 1
ACPI: IORT: Dropping unhandled type 1
ACPI: IORT: Dropping unhandled type 1
ACPI: IORT: Dropping unhandled type 1
ACPI: IORT: Dropping unhandled type 1
ACPI: IORT: Dropping unhandled type 1
ACPI: IORT: Dropping unhandled type 1
ACPI: IORT: Dropping unhandled type 1
random: entropy device external interface
MAP f7230000 mode 2 pages 992
MAP f7ca0000 mode 2 pages 336
MAP 2040000 mode 0 pages 16
MAP 20c0000 mode 0 pages 16
MAP 20500000 mode 0 pages 64
WARNING: Device "openfirm" is Giant locked and may be deleted before FreeBSD 13.0.
WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 13.0.
kbd0 at kbdmux0
acpi0: <NXP LX2160>
acpi0: Power Button (fixed)
acpi0: Sleep Button (fixed)
acpi0: Could not update all GPEs: AE_NOT_CONFIGURED
psci0: <ARM Power State Co-ordination Interface Driver> on acpi0
gic0: <ARM Generic Interrupt Controller v3.0> iomem 0x6000000-0x601ffff,0x6200000-0x63fffff on acpi0
its0: <ARM GIC Interrupt Translation Service> on gic0
generic_timer0: <ARM Generic Timer> irq 23,24,25 on acpi0
Timecounter "ARM MPCore Timecounter" frequency 25000050 Hz quality 1000
Event timer "ARM MPCore Eventtimer" frequency 25000050 Hz quality 1000
efirtc0: <EFI Realtime Clock>
efirtc0: registered as a time-of-day clock, resolution 1.000000s
uart0: <PrimeCell UART (PL011)> iomem 0x21c0000-0x21cffff irq 0 on acpi0
uart0: console (115200,n,8,1)
uart1: <PrimeCell UART (PL011)> iomem 0x21d0000-0x21dffff irq 1 on acpi0
pcib0: <Generic PCI host controller> on acpi0
pci0: <PCI bus> on pcib0
nvme0: <Generic NVMe Device> mem 0x46010000-0x46013fff,0x46000000-0x4600ffff at device 0.0 on pci0
pcib1: <Generic PCI host controller> on acpi0
pci1: <PCI bus> on pcib1
pcib2: <PCI-PCI bridge> at device 0.0 on pci1
pci2: <PCI bus> on pcib2
pcib3: <PCI-PCI bridge> at device 1.0 on pci2
pci3: <PCI bus> on pcib3
pcib4: <PCI-PCI bridge> at device 0.0 on pci3
pci4: <PCI bus> on pcib4
pcib5: <PCI-PCI bridge> at device 2.0 on pci4
pci5: <PCI bus> on pcib5
igb0: <Intel(R) PRO/1000 PCI-Express Network Driver> port 0x2020-0x203f mem 0x47420000-0x4743ffff,0x47000000-0x473fffff,0x474c4000-0x474c7fff at device 0.0 on pci5
igb0: Using 1024 TX descriptors and 1024 RX descriptors
igb0: Using 8 RX queues 8 TX queues
igb0: Using MSI-X interrupts with 9 vectors
igb0: Ethernet address: [_MAC_XXXXXXXXXX]
igb1: <Intel(R) PRO/1000 PCI-Express Network Driver> port 0x2000-0x201f mem 0x47400000-0x4741ffff,0x46c00000-0x46ffffff,0x474c0000-0x474c3fff at device 0.1 on pci5
igb1: Using 1024 TX descriptors and 1024 RX descriptors
igb1: Using 8 RX queues 8 TX queues
igb1: Using MSI-X interrupts with 9 vectors
igb1: Ethernet address: [_MAC_XXXXXXXXXX]
pcib6: <PCI-PCI bridge> at device 4.0 on pci4
pci6: <PCI bus> on pcib6
igb2: <Intel(R) PRO/1000 PCI-Express Network Driver> port 0x1020-0x103f mem 0x46820000-0x4683ffff,0x46400000-0x467fffff,0x468c4000-0x468c7fff at device 0.0 on pci6
igb2: Using 1024 TX descriptors and 1024 RX descriptors
igb2: Using 8 RX queues 8 TX queues
igb2: Using MSI-X interrupts with 9 vectors
igb2: Ethernet address: [_MAC_XXXXXXXXXX]
igb3: <Intel(R) PRO/1000 PCI-Express Network Driver> port 0x1000-0x101f mem 0x46800000-0x4681ffff,0x46000000-0x463fffff,0x468c0000-0x468c3fff at device 0.1 on pci6
igb3: Using 1024 TX descriptors and 1024 RX descriptors
igb3: Using 8 RX queues 8 TX queues
igb3: Using MSI-X interrupts with 9 vectors
igb3: Ethernet address: [_MAC_XXXXXXXXXX]
pcib7: <PCI-PCI bridge> at device 3.0 on pci2
pci7: <PCI bus> on pcib7
nvme1: <Generic NVMe Device> mem 0x47600000-0x47603fff,0xa410000000-0xa4100fffff at device 0.0 on pci7
pcib8: <PCI-PCI bridge> at device 5.0 on pci2
pci8: <PCI bus> on pcib8
vgapci0: <VGA-compatible display> mem 0xa400000000-0xa40fffffff,0x47500000-0x4751ffff at device 0.0 on pci8
pci8: <multimedia, HDA> at device 0.1 (no driver attached)
pcib9: <PCI-PCI bridge> at device 7.0 on pci2
pci9: <PCI bus> on pcib9
acpi_button0: <Power Button> on acpi0
ahci0: <AHCI SATA controller> iomem 0x3200000-0x320ffff,0x700100520-0x700100523 irq 10,11 on acpi0
ahci0: AHCI v1.31 with 1 6Gbps ports, Port Multiplier not supported with FBS
ahci0: quirks=0x2<NOPMP>
ahcich0: <AHCI channel> at channel 0 on ahci0
ahci1: <AHCI SATA controller> iomem 0x3210000-0x321ffff irq 12,13 on acpi0
ahci1: AHCI v1.31 with 1 6Gbps ports, Port Multiplier not supported with FBS
ahci1: quirks=0x2<NOPMP>
ahcich1: <AHCI channel> at channel 0 on ahci1
ahci2: <AHCI SATA controller> iomem 0x3220000-0x322ffff irq 14,15 on acpi0
ahci2: AHCI v1.31 with 1 6Gbps ports, Port Multiplier not supported with FBS
ahci2: quirks=0x2<NOPMP>
ahcich2: <AHCI channel> at channel 0 on ahci2
ahci3: <AHCI SATA controller> iomem 0x3230000-0x323ffff irq 16,17 on acpi0
ahci3: AHCI v1.31 with 1 6Gbps ports, Port Multiplier not supported with FBS
ahci3: quirks=0x2<NOPMP>
ahcich3: <AHCI channel> at channel 0 on ahci3
xhci0: <Generic USB 3.0 controller> iomem 0x3100000-0x310ffff irq 21 on acpi0
xhci0: 64 bytes context size, 32-bit DMA
usbus0 on xhci0
xhci1: <Generic USB 3.0 controller> iomem 0x3110000-0x311ffff irq 22 on acpi0
xhci1: 64 bytes context size, 32-bit DMA
usbus1 on xhci1
cpu0: <ACPI CPU> on acpi0
cryptosoft0: <software crypto>
Timecounters tick every 1.000 msec
usbus0: 5.0Gbps Super Speed USB v3.0
usbus1: 5.0Gbps Super Speed USB v3.0
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
ugen1.1: <Generic XHCI root HUB> at usbus1
uhub0 on usbus1
uhub0: <Generic XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1
ugen0.1: <Generic XHCI root HUB> at usbus0
uhub1 on usbus0
uhub1: <Generic XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
uhub1: 2 ports with 2 removable, self powered
uhub0: 2 ports with 2 removable, self powered
nvme1: temperature threshold not supported
Release APs...done
Trying to mount root from zfs:zroot/ROOT/default []...
ada0 at ahcich1 bus 0 scbus1 target 0 lun 0
ada0: <ST5000LM000-2AN170 0001> ACS-3 ATA SATA 3.x device
ada0: [_SERIAL_NUMBER_XXXXX]
ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 512bytes)
ada0: Command Queueing enabled
ada0: 4769307MB (9767541168 512 byte sectors)
CPU 0: ARM Cortex-A72 r0p3 affinity: 0 0
ada1 at ahcich2 bus 0 scbus2 target 0 lun 0
ada1: <ST5000LM000-2AN170 0001> ACS-3 ATA SATA 3.x device
ada1: [_SERIAL_NUMBER_XXXXX]
ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 512bytes)
ada1: Command Queueing enabled
ada1: 4769307MB (9767541168 512 byte sectors)
Cache Type = <64 byte D-cacheline,64 byte I-cacheline,PIPT ICache,64 byte ERG,64 byte CWG>
nda0 at nvme0 bus 0 scbus4 target 0 lun 1
Instruction Set Attributes 0 = <CRC32,SHA2,SHA1,AES+PMULL>
nda0: <INTEL MEMPEK1J016GAD K4110420 PHBT839104N3016N>
Instruction Set Attributes 1 = <>
nda0: [_SERIAL_NUMBER_XXXXXXXXXXXXX]
Processor Features 0 = <GIC,AdvSIMD,FP,EL3 32,EL2 32,EL1 32,EL0 32>
nda0: nvme version 1.1 x2 (max x2) lanes PCIe Gen3 (max Gen3) link
Processor Features 1 = <>
nda0: 13736MB (28131328 512 byte sectors)
nda1 at nvme1 bus 0 scbus5 target 0 lun 1
Memory Model Features 0 = <TGran4,TGran64,SNSMem,BigEnd,16bit ASID,16TB PA>
nda1: <MTR_MLC_TS_4GB[_IP_XXX] 04000017A3ED>
Memory Model Features 1 = <8bit VMID>
nda1: [_SERIAL_NUMBER_XXXXXXXXX]
Memory Model Features 2 = <32bit CCIDX,48bit VA>
nda1: nvme version 1.0 x1 (max x8) lanes PCIe Gen2 (max Gen3) link
Debug Features 0 = <2 CTX BKPTs,4 Watchpoints,6 Breakpoints,PMUv3,Debugv8>
nda1: 4058MB (8310784 512 byte sectors)
Debug Features 1 = <>
Auxiliary Features 0 = <>
Auxiliary Features 1 = <>
CPU 1: ARM Cortex-A72 r0p3 affinity: 0 1
CPU 2: ARM Cortex-A72 r0p3 affinity: 1 0
CPU 3: ARM Cortex-A72 r0p3 affinity: 1 1
CPU 4: ARM Cortex-A72 r0p3 affinity: 2 0
CPU 5: ARM Cortex-A72 r0p3 affinity: 2 1
CPU 6: ARM Cortex-A72 r0p3 affinity: 3 0
CPU 7: ARM Cortex-A72 r0p3 affinity: 3 1
CPU 8: ARM Cortex-A72 r0p3 affinity: 4 0
CPU 9: ARM Cortex-A72 r0p3 affinity: 4 1
CPU 10: ARM Cortex-A72 r0p3 affinity: 5 0
CPU 11: ARM Cortex-A72 r0p3 affinity: 5 1
CPU 12: ARM Cortex-A72 r0p3 affinity: 6 0
CPU 13: ARM Cortex-A72 r0p3 affinity: 6 1
CPU 14: ARM Cortex-A72 r0p3 affinity: 7 0
CPU 15: ARM Cortex-A72 r0p3 affinity: 7 1
WARNING: WITNESS option enabled, expect reduced performance.
Root mount waiting for: usbus0 usbus1
ugen0.2: <vendor 0x0424 product 0x2514> at usbus0
uhub2 on uhub1
uhub2: <vendor 0x0424 product 0x2514, class 9/0, rev 2.00/0.00, addr 1> on usbus0
uhub2: MTT enabled
ugen1.2: <vendor 0x04b4 product 0x6502> at usbus1
uhub3 on uhub0
uhub3: <vendor 0x04b4 product 0x6502, class 9/0, rev 2.10/50.10, addr 1> on usbus1
uhub3: MTT enabled
uhub2: 4 ports with 3 removable, self powered
uhub3: 4 ports with 4 removable, self powered
Root mount waiting for: usbus0 usbus1
ugen0.3: <PixArt USB Optical Mouse> at usbus0
ugen1.3: <vendor 0x0424 product 0x2514> at usbus1
uhub4 on uhub3
uhub4: <vendor 0x0424 product 0x2514, class 9/0, rev 2.00/b.b3, addr 2> on usbus1
uhub4: MTT enabled
Root mount waiting for: usbus0 usbus1
ugen0.4: <SIGMACHIP USB Keyboard> at usbus0
ukbd0 on uhub2
ukbd0: <SIGMACHIP USB Keyboard, class 0/0, rev 1.10/3.30, addr 3> on usbus0
kbd1 at ukbd0
uhub4: 4 ports with 3 removable, self powered
ugen1.4: <vendor 0x04b4 product 0x6500> at usbus1
uhub5 on uhub0
uhub5: <vendor 0x04b4 product 0x6500, class 9/0, rev 3.00/50.10, addr 3> on usbus1
Root mount waiting for: usbus1
uhub5: 4 ports with 4 removable, self powered
Dual Console: Serial Primary, Video Secondary
lo0: link state changed to UP
igb0: link state changed to UP
ums0 on uhub2
ums0: <PixArt USB Optical Mouse, class 0/0, rev 1.10/1.00, addr 2> on usbus0
ums0: 3 buttons and [XYZ] coordinates ID=0
uhid0 on uhub2
uhid0: <SIGMACHIP USB Keyboard, class 0/0, rev 1.10/3.30, addr 3> on usbus0
Security policy loaded: MAC/ntpd (mac_ntpd)