Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2020-12-17 04:26:40
From: zimzum
Description: FreeBSD/amd64 on Dell Inc. OptiPlex 9020
---<<BOOT>>--- Copyright (c) 1992-2020 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 12.2-RELEASE-p1 GENERIC amd64 FreeBSD clang version 10.0.1 ([_EMAIL_XXXXX]:llvm/llvm-project.git llvmorg-10.0.1-0-gef32c611aa2) VT(vga): resolution 640x480 CPU: Intel(R) Core(TM) i5-4590 CPU @ 3.30GHz (3292.44-MHz K8-class CPU) Origin="GenuineIntel" Id=0x306c3 Family=0x6 Model=0x3c Stepping=3 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> AMD Features2=0x21<LAHF,ABM> Structured Extended Features=0x27ab<FSGSBASE,TSCADJ,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG> Structured Extended Features3=0x9c000400<MD_CLEAR,IBPB,STIBP,L1DFL,SSBD> XSAVE Features=0x1<XSAVEOPT> VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID TSC: P-state invariant, performance statistics real memory = 17179869184 (16384 MB) avail memory = 16527372288 (15761 MB) Event timer "LAPIC" quality 600 ACPI APIC Table: <DELL CBX3 > FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs FreeBSD/SMP: 1 package(s) x 4 core(s) random: unblocking device. ioapic0 <Version 2.0> irqs 0-23 on motherboard Launching APs: 3 1 2 Timecounter "TSC-low" frequency 1646220315 Hz quality 1000 random: entropy device external interface kbd1 at kbdmux0 000.000023 [4336] netmap_init netmap: loaded module [ath_hal] loaded module_register_init: MOD_LOAD (vesa, 0xffffffff81115e40, 0) error 19 random: registering fast source Intel Secure Key RNG random: fast provider: "Intel Secure Key RNG" nexus0 efirtc0: <EFI Realtime Clock> on motherboard efirtc0: registered as a time-of-day clock, resolution 1.000000s cryptosoft0: <software crypto> on motherboard acpi0: <DELL CBX3 > on motherboard acpi0: Power Button (fixed) cpu0: <ACPI CPU> on acpi0 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 Event timer "HPET" frequency 14318180 Hz quality 550 Event timer "HPET1" frequency 14318180 Hz quality 440 Event timer "HPET2" frequency 14318180 Hz quality 440 Event timer "HPET3" frequency 14318180 Hz quality 440 Event timer "HPET4" frequency 14318180 Hz quality 440 atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 atrtc0: Warning: Couldn't map I/O. atrtc0: registered as a time-of-day clock, resolution 1.000000s Event timer "RTC" frequency 32768 Hz quality 0 attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xf7800000-0xf7bfffff,0xe0000000-0xefffffff at device 2.0 on pci0 vgapci0: Boot video device hdac0: <Intel Haswell HDA Controller> mem 0xf7c34000-0xf7c37fff at device 3.0 on pci0 xhci0: <Intel Lynx Point USB 3.0 controller> mem 0xf7c20000-0xf7c2ffff at device 20.0 on pci0 xhci0: 32 bytes context size, 64-bit DMA usbus0: waiting for BIOS to give up control xhci_interrupt: host controller halted xhci0: Port routing mask set to 0xffffffff usbus0 on xhci0 usbus0: 5.0Gbps Super Speed USB v3.0 pci0: <simple comms> at device 22.0 (no driver attached) uart2: <Intel Lynx Point KT Controller> port 0xf0e0-0xf0e7 mem 0xf7c3e000-0xf7c3efff at device 22.3 on pci0 uart2: Using 1 MSI message em0: <Intel(R) PRO/1000 Network Connection> port 0xf080-0xf09f mem 0xf7c00000-0xf7c1ffff,0xf7c3d000-0xf7c3dfff at device 25.0 on pci0 em0: Using 1024 TX descriptors and 1024 RX descriptors em0: Using an MSI interrupt em0: Ethernet address: [_MAC_XXXXXXXXXX] em0: netmap queues/slots: TX 1/1024, RX 1/1024 ehci0: <Intel Lynx Point USB 2.0 controller USB-B> mem 0xf7c3c000-0xf7c3c3ff at device 26.0 on pci0 usbus1: EHCI version 1.0 usbus1 on ehci0 usbus1: 480Mbps High Speed USB v2.0 hdac1: <Intel Lynx Point HDA Controller> mem 0xf7c30000-0xf7c33fff at device 27.0 on pci0 ehci1: <Intel Lynx Point USB 2.0 controller USB-A> mem 0xf7c3b000-0xf7c3b3ff at device 29.0 on pci0 usbus2: EHCI version 1.0 usbus2 on ehci1 usbus2: 480Mbps High Speed USB v2.0 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 ahci0: <Intel Lynx Point AHCI SATA controller> port 0xf0d0-0xf0d7,0xf0c0-0xf0c3,0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf060-0xf07f mem 0xf7c3a000-0xf7c3a7ff at device 31.2 on pci0 ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported ahcich0: <AHCI channel> at channel 0 on ahci0 ahcich1: <AHCI channel> at channel 1 on ahci0 ahciem0: <AHCI enclosure management bridge> on ahci0 acpi_button0: <Power Button> on acpi0 acpi_tz0: <Thermal Zone> on acpi0 acpi_tz1: <Thermal Zone> on acpi0 uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 uart0: console (115200,n,8,1) atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 12. est0: <Enhanced SpeedStep Frequency Control> on cpu0 ZFS filesystem version: 5 ZFS storage pool version: features support (5000) Timecounters tick every 1.000 msec hdacc0: <Intel Haswell HDA CODEC> at cad 0 on hdac0 hdaa0: <Intel Haswell Audio Function Group> at nid 1 on hdacc0 hdacc1: <Realtek ALC280 HDA CODEC> at cad 0 on hdac1 hdaa1: <Realtek ALC280 Audio Function Group> at nid 1 on hdacc1 pcm0: <Realtek ALC280 (Analog 2.0+HP/2.0)> at nid 20,21 and 26 on hdaa1 pcm1: <Realtek ALC280 (Rear Analog)> at nid 27 and 24 on hdaa1 ugen1.1: <Intel EHCI root HUB> at usbus1 ugen2.1: <Intel EHCI root HUB> at usbus2 ugen0.1: <0x8086 XHCI root HUB> at usbus0 uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 Trying to mount root from zfs:zroot/ROOT/default []... uhub1: Root mount waiting for: usbus0 usbus1 usbus2 CAM <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 ses0 at ahciem0 bus 0 scbus2 target 0 lun 0 ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device ses0: SEMB SES Device ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 ada0: <HFS120G32TND-N1A2A 30000P10> ACS-2 ATA SATA 3.x device ada0: [_SERIAL_NUMBER_XXXXXXXXXXXXXX] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) ada0: Command Queueing enabled ada0: 114473MB (234441648 512 byte sectors) ses0: pass0,ada0 in 'Slot 00', SATA Slot: scbus0 target 0 ada1 at ahcich1 bus 0 scbus1 target 0 lun 0 ada1: <Samsung SSD 860 EVO 500GB RVT01B6Q> ACS-4 ATA SATA 3.x device ada1: [_SERIAL_NUMBER_XXXXXXXXXXXX] ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) ada1: Command Queueing enabled ada1: 476940MB (976773168 512 byte sectors) ses0: pass1,ada1 in 'Slot 01', SATA Slot: scbus1 target 0 uhub1: 21 ports with 21 removable, self powered Root mount waiting for: usbus0 usbus1 usbus2 uhub0: 3 ports with 3 removable, self powered uhub2: 3 ports with 3 removable, self powered Root mount waiting for: usbus0 usbus1 usbus2 ugen2.2: <vendor 0x8087 product 0x8000> at usbus2 uhub3 on uhub2 uhub3: <vendor 0x8087 product 0x8000, class 9/0, rev 2.00/0.04, addr 2> on usbus2 ugen1.2: <vendor 0x8087 product 0x8008> at usbus1 uhub4 on uhub0 uhub4: <vendor 0x8087 product 0x8008, class 9/0, rev 2.00/0.04, addr 2> on usbus1 uhub4: 6 ports with 6 removable, self powered uhub3: 8 ports with 8 removable, self powered ugen0.2: <Lexar USB Flash Drive> at usbus0 umass0 on uhub1 umass0: <Lexar USB Flash Drive, class 0/0, rev 3.00/11.00, addr 1> on usbus0 umass0: SCSI over Bulk-Only; quirks = 0x8100 umass0:3:0: Attached to scbus3 da0 at umass-sim0 bus 0 scbus3 target 0 lun 0 da0: <Lexar USB Flash Drive 1100> Removable Direct Access SPC-4 SCSI device da0: [_SERIAL_NUMBER_XXXXXXXXXXXXXXXXX] da0: 400.000MB/s transfers da0: 61054MB (125038592 512 byte sectors) da0: quirks=0x2<NO_6_BYTE> GEOM_ELI: Device ada0p3.eli created. GEOM_ELI: Encryption: AES-XTS 128 GEOM_ELI: Crypto: software lo0: link state changed to UP em0: link state changed to UP