Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2020-12-21 10:46:44
From: dru
Description: FreeBSD/i386 on IBM 2668Q1G
---<<BOOT>>--- Copyright (c) 1992-2020 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 12.2-RELEASE-p1 GENERIC i386 FreeBSD clang version 10.0.1 ([_EMAIL_XXXXX]:llvm/llvm-project.git llvmorg-10.0.1-0-gef32c611aa2) VT(vga): resolution 640x480 module iwi already present! sysctl_warn_reuse: can't re-use a leaf (debug.hwpstate_verbose)! sysctl_warn_reuse: can't re-use a leaf (debug.hwpstate_verify)! module_register: cannot register cpu/ichss from kernel; already loaded from cpufreq.ko Module cpu/ichss failed to register: 17 module_register: cannot register cpu/est from kernel; already loaded from cpufreq.ko Module cpu/est failed to register: 17 module_register: cannot register cpu/hwpstate from kernel; already loaded from cpufreq.ko Module cpu/hwpstate failed to register: 17 module_register: cannot register cpu/p4tcc from kernel; already loaded from cpufreq.ko Module cpu/p4tcc failed to register: 17 module_register: cannot register cpu/powernow from kernel; already loaded from cpufreq.ko Module cpu/powernow failed to register: 17 module_register: cannot register cpu/smist from kernel; already loaded from cpufreq.ko Module cpu/smist failed to register: 17 CPU: Intel(R) Pentium(R) M processor 2.26GHz (798.07-MHz 686-class CPU) Origin="GenuineIntel" Id=0x6d8 Family=0x6 Model=0xd Stepping=8 Features=0xafe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE> Features2=0x180<EST,TM2> AMD Features=0x100000<NX> real memory = 2147483648 (2048 MB) avail memory = 2071011328 (1975 MB) Event timer "LAPIC" quality 100 ACPI APIC Table: <IBM TP-1Y > random: unblocking device. Firmware Warning (ACPI): 32/64X length mismatch in FADT/Gpe0Block: 64/32 (20200430/tbfadt-748) Firmware Warning (ACPI): Optional FADT field Gpe1Block has valid Address but zero Length: 0x000000000000102C/0x0 (20200430/tbfadt-796) ioapic0: MADT APIC ID 1 != hw id 0 ioapic0 <Version 2.0> irqs 0-23 on motherboard Timecounter "TSC" frequency 798071794 Hz quality 800 random: entropy device external interface kbd1 at kbdmux0 [ath_hal] loaded module_register_init: MOD_LOAD (vesa, 0x14c8e30, 0) error 19 nexus0 vtvga0: <VT VGA driver> on motherboard cryptosoft0: <software crypto> on motherboard acpi0: <IBM TP-1Y> on motherboard acpi_ec0: <Embedded Controller: GPE 0x1c, ECDT> port 0x62,0x66 on acpi0 acpi0: Power Button (fixed) cpu0: <ACPI CPU> on acpi0 attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 atrtc0: registered as a time-of-day clock, resolution 1.000000s Event timer "RTC" frequency 32768 Hz quality 0 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_button0: <Sleep Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 vgapci0: <VGA-compatible display> port 0x3000-0x30ff mem 0xc0000000-0xc7ffffff,0xb0100000-0xb010ffff irq 16 at device 0.0 on pci1 vgapci0: Boot video device pcib2: <ACPI PCI-PCI bridge> irq 20 at device 28.0 on pci0 pci2: <ACPI PCI bus> on pcib2 bge0: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 0x004101> mem 0xb0200000-0xb020ffff irq 16 at device 0.0 on pci2 bge0: CHIP ID 0x00004101; ASIC REV 0x04; CHIP REV 0x41; PCI-E miibus0: <MII bus> on bge0 brgphy0: <BCM5750 1000BASE-T media interface> PHY 1 on miibus0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow bge0: Ethernet address: [_MAC_XXXXXXXXXX] pcib3: <ACPI PCI-PCI bridge> irq 22 at device 28.2 on pci0 pci3: <ACPI PCI bus> on pcib3 uhci0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> port 0x1800-0x181f irq 16 at device 29.0 on pci0 usbus0 on uhci0 uhci1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> port 0x1820-0x183f irq 17 at device 29.1 on pci0 usbus1 on uhci1 uhci2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> port 0x1840-0x185f irq 18 at device 29.2 on pci0 usbus2 on uhci2 uhci3: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D> port 0x1860-0x187f irq 19 at device 29.3 on pci0 usbus3 on uhci3 ehci0: <Intel 82801FB (ICH6) USB 2.0 controller> mem 0xb0000000-0xb00003ff irq 19 at device 29.7 on pci0 usbus4: EHCI version 1.0 usbus4 on ehci0 pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci4: <ACPI PCI bus> on pcib4 cbb0: <RF5C476 PCI-CardBus Bridge> mem 0xb4000000-0xb4000fff irq 16 at device 0.0 on pci4 cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 pccard0: Deprecated code (to be removed in FreeBSD 13): PC Card to be removed. iwi0: <Intel(R) PRO/Wireless 2200BG> mem 0xb4001000-0xb4001fff irq 21 at device 2.0 on pci4 pcm0: <Intel ICH6 (82801FB)> port 0x1c00-0x1cff,0x1880-0x18bf mem 0xb0000800-0xb00009ff,0xb0000400-0xb00004ff irq 22 at device 30.2 on pci0 pcm0: <Analog Devices AD1981B AC97 Codec> pci0: <simple comms, generic modem> at device 30.3 (no driver attached) isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH6M SATA150 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x18c0-0x18cf at device 31.2 on pci0 ata0: <ATA channel> at channel 0 on atapci0 ata1: <ATA channel> at channel 1 on atapci0 acpi_tz0: <Thermal Zone> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: <PS/2 Mouse> flags 0x2000 irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model Synaptics Touchpad, device ID 0 fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 ppc0: <Parallel port> port 0x3bc-0x3be irq 7 on acpi0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode ppbus0: <Parallel port bus> on ppc0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 battery0: <ACPI Control Method Battery> on acpi0 acpi_acad0: <AC Adapter> on acpi0 acpi_ibm0: <IBM ThinkPad ACPI Extras> on acpi0 acpi_ibm0: Firmware version is 0x100 orm0: <ISA Option ROMs> at iomem 0xc0000-0xcffff,0xd1800-0xd27ff,0xdc000-0xdffff,0xe0000-0xeffff pnpid ORM0000 on isa0 est0: <Enhanced SpeedStep Frequency Control> on cpu0 Timecounters tick every 1.000 msec usbus0: 12Mbps Full Speed USB v1.0 usbus1: 12Mbps Full Speed USB v1.0 usbus2: 12Mbps Full Speed USB v1.0 ugen1.1: <Intel UHCI root HUB> at usbus1 uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 ugen2.1: <Intel UHCI root HUB> at usbus2 uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 ugen0.1: <Intel UHCI root HUB> at usbus0 uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 usbus3: 12Mbps Full Speed USB v1.0 usbus4: 480Mbps High Speed USB v2.0 ugen4.1: <Intel EHCI root HUB> at usbus4 uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4 ugen3.1: <Intel UHCI root HUB> at usbus3 uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3 Trying to mount root from ufs:/dev/ada0p2 [rw]... Root mount waiting for: usbus0 usbus1 usbus2 usbus3 usbus4 cbb0 CAM uhub0: 2 ports with 2 removable, self powered uhub1: 2 ports with 2 removable, self powered uhub2: 2 ports with 2 removable, self powered uhub4: 2 ports with 2 removable, self powered Root mount waiting for: usbus4 CAM ada0 at ata0 bus 0 scbus0 target 0 lun 0 ada0: <FUJITSU MHS2060AT 8405> ATA-6 device ada0: [_SERIAL_NUMBER_XXXXXXXXX] ada0: 150.000MB/s transfers (SATA, UDMA5, PIO 8192bytes) ada0: 57231MB (117210240 512 byte sectors) cd0 at ata1 bus 0 scbus1 target 0 lun 0 cd0: <MATSHITA DVD-RAM UJ-822S 1.61> Removable CD-ROM SCSI device cd0: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes) cd0: Attempt to query device size failed: NOT READY, Medium not present fdc0: cmd 08 failed at in byte 1 of 1 fdc0: sense intr err reading stat reg 0 fdc0: cmd 08 failed at in byte 1 of 1 fdc0: sense intr err reading stat reg 0 fdc0: cmd 08 failed at in byte 1 of 1 fdc0: sense intr err reading stat reg 0 fdc0: cmd 08 failed at in byte 1 of 1 fdc0: sense intr err reading stat reg 0 uhub3: 8 ports with 8 removable, self powered Root mount waiting for: usbus4 mountroot: waiting for device /dev/ada0p2... ugen2.2: <STMicroelectronics Biometric Coprocessor> at usbus2 info: [drm] Initialized drm 1.1.0 20060810 wlan0: Ethernet address: [_MAC_XXXXXXXXXX] lo0: link state changed to UP bge0: link state changed to DOWN wlan0: link state changed to UP iwi0: need multicast update callback iwi0: need multicast update callback iwi0: need multicast update callback